Beli Mütek Systemtechnik Mgp 60 bekas (22.423)

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Iiodpev Rpxlsfx Adyog Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Iedpfxsgl Nlmj Adyeig Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baik (bekas), Clean air extraction Iiodjrb D Nspfx Adyeg Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles Iiededwktkjpfx Adyjg - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Ijdpfx Adsgmfa Aoysig Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: Iijdpfoffh Atjx Adysg - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months Isdpfx Aogfm Rysdysig The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Iiedpfxochuvre Adyjg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Harga Spesial *tersedia berdasarkan perjanjian Baru: Dengan opsi pengubah frekuensi, bahkan hingga 45% dapat memenuhi syarat untuk mendapatkan subsidi pemerintah Kombinasi dari: Mesin Pembuat Briket mütek MPP 60 + Unit Penyedot Debu MMJET 350 *Disetujui untuk pemasangan di dalam ruangan *kedua mesin individual telah selesai diproduksi dan tersedia di gudang, hanya perlu disambungkan 1. Data Teknis Mesin Pembuat Briket: Mesin Pembuat Briket terlaris kami, sebuah produk klasik. + Teknologi yang teruji, sederhana, untuk meminimalkan potensi kesalahan + 25 tahun pengalaman, pengembangan lebih lanjut, dan keahlian + Ribuan mesin digunakan oleh pelanggan yang puas + Rasio harga dan kinerja terbaik Nomor tarif barang: 84793010 Diameter briket: 50 mm Bushing depan: 50 mm Langkah briket maks.: 40 mm Langkah briket opsional: 40 mm Kapasitas keluaran (tergantung pada material): hingga 60 kg/jam* *tergantung pada berat jenis Ijdpsd Su Hxofx Adysig *berdasarkan berat jenis 200 kg per meter kubik . Daya motor: 5,5 kW, 400 Volt / 50 Hz / 3 fasa, Luas dasar seluruh sistem: 2,2x1,1x2,8 m (Panjang x Lebar x Tinggi) Tinggi - 2,8 m (wadah khusus) Pengiriman juga dimungkinkan dalam 2 bagian Berat: sekitar 1200 kg, Volume oli: 110 liter Diameter silo: 1000 mm Pompa: 27 liter Prakompresor hidraulik Opsi pendinginan rahang penekan: tidak Opsi pendinginan oli hidraulik: ya Opsi pemantauan level pengisian: ya Sesuai dengan standar CE 2. Data Teknis Unit Penyedot Debu MMJET 350: Diameter sambungan penyedot: 350 mm Motor: 11 kW Saluran penyedot di sisi kiri (jika berdiri di depan wadah debu) Kandungan debu residu:

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 300 kg, Tray Loader TL-6040 – Transfer Unit – 2-lane stacker/destacker module for the efficient transport of trays (containers) for printed circuit boards. The empty trays are removed from the transport cart, automatically positioned, and provided for loading. After loading, the trays are automatically stacked onto a second transport cart. • Compact design • Small footprint • Stacking/destacking module • Transport cart • Standard tray size: 400 x 600 mm • Robust welded steel frame • W x D x H: 840 x 1,330 x 1,870 mm Ijdpfx Aeunh I Nodyeig • Manual operating height: 930 – 1,050 mm • Compressed air: 0.6 mPa (6 bar), oil-free, filtered, dry • Average consumption approx. 10 l/min • Ambient temperature: +18°C to +30°C • Weight approx. 300 kg

Tahun pembuatan: 2020, jam operasional: 100 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 300 kg, panjang total: 1.330 mm, lebar total: 840 mm, tinggi total: 1.870 mm, sambungan udara terkompresi: 6 batang, jenis arus masuk: AC (pendingin udara), TL-6040 Iedpfexuqtbsx Adyeig

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Ideal for shredding Styrofoam or similar materials Throughput highly dependent on screen size and input material: - Up to 60 kg/h with EPS using a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW - 400 Volt Robust steel construction Hardened cutting knives Screen with interchangeable inserts Available perforations: (8), (10), 15, 22, 26, 30, 40, or 60 mm Isdpeh S H T Uefx Adysig With electric drive equipped with star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 150 mm Optional for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (L x W x H) Weight approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Kondisi: baru, Tahun pembuatan: 2025, Ideal for shredding straw, polystyrene foam (EPS), leaves, hay, and bread. Throughput is highly dependent on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW, 400 Volt (alternatively 9.2 kW or 15 kW available upon request) Iiedpfezbizsx Adyjg Optional: *Surcharge for next largest machine with 18.5 kW and larger silo diameter: + €2,750 net Robust steel construction Hardened cutting blades Screen with interchangeable inserts Available perforations: 10, 15, 22, 26, 30, 40, or 60 mm When equipped with electric drive: star-delta switch, overload protection, and 8 m ready-to-plug power cable Blow-out nozzle, 150 mm diameter Suitable for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and a swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (LxWxH) Weight approx. 240 kg Spare part prices and options: 24 hardened blades, €9.90 each net 6 bolts, €14.90 each net 1 screen, €475 net Lid, €290 each net Polystyrene disk, €600 each net

Kondisi: sangat baik (bekas), NOMOR KATALOG: 6935 DATA TEKNIS - lebar rol: 630 mm - jumlah pisau: 4 buah - ketebalan maksimum elemen yang dikerjakan: 210 mm * dari atas: - ratchet - rol masukan bergerigi, penarik - penekan - rol penyerut - penekan - rol keluaran halus, penarik * dari bawah: - rol yang dapat diatur pada meja bawah 2 buah - motor 4,4 kW - 2 kecepatan feeding - dimensi p/l/t: 1220x950x1060 mm - berat: 750 kg Iijdszr U Dxopfx Adyjg KEUNGGULAN – produksi Jerman – planer tebal bekas, kondisi sangat baik Harga netto: 12.900 PLN Harga netto: 3.071 EUR Harga netto dihitung menurut kurs 4,2 PLN/EUR (dalam hal fluktuasi kurs yang besar, harga dapat berubah)

Kondisi: baik (bekas), Mesin Bekas yang Telah Direkondisi Mesin dasar mulai dari €145.000 (harga bersih) *Opsi tersedia dengan biaya tambahan, lihat di bawah dengan garansi penuh selama 1 tahun *tersedia satu unit mesin untuk pengiriman segera Data Teknis: Kapasitas produksi hingga maksimal 1200 kg/jam, tergantung pada jenis material (misalnya, serbuk gergaji dengan berat jenis 180 kg/m³) Diameter briket 75 mm termasuk saluran pemampat sepanjang 2 m Daya motor utama 45 kW Motor penggerak sekrup pengumpan 2 x 2,2 kW Sekrup pemadat 2 x 5,5 kW Sekrup pendistribusi 2,2 kW Motor pompa hidrolik 0,37 kW Total daya yang dibutuhkan 65 kW Panel kontrol dengan tampilan teks yang jelas untuk kondisi operasi dan indikator beban untuk penggerak utama dan sekrup pengumpan Sistem kontrol PLC Siemens S7/300 dengan penghitung jam operasi di lemari kontrol Mesin memiliki tanda CE Fungsi mulai/berhenti otomatis Dimensi 3100x860x1800 mm (pxlxt) Berat 4500 kg Opsi dengan biaya tambahan: Pengatur suhu untuk alat pemampat untuk menjaga suhu agar kualitas briket optimal. Pengatur suhu untuk pompa, unit pendingin, kipas, dan presostat Siap dipasang – wajib dipasang untuk pengoperasian termasuk sistem kontrol yang sesuai + €3.990 (harga bersih) Perangkat pemotong untuk memotong briket + €5.750 (harga bersih) Membutuhkan sambungan udara terkompresi! Silo untuk seri MAP + €19.970 (harga bersih) - Silo penyimpanan di atas mesin - Kapasitas sekitar 6 m³, konstruksi baja yang stabil dengan pengeluaran melalui agitator dan sensor level. Saluran pengangkutan / jalur pendingin (nilai nominal: 5x2m) setiap 2 meter seharga €750 (harga bersih) Pemasangan / commissioning (nilai nominal per mesin sekitar 2-3 hari di lokasi) biaya berdasarkan waktu yang dibutuhkan dan akan ditagihkan secara terpisah. Berlaku ketentuan berikut: Teknisi servis/mekatronik per jam pemasangan dan perjalanan: €129,00 Lembur: 25% biaya tambahan Setiap jam kerja pada hari Sabtu dan malam: 50% biaya tambahan Setiap jam kerja pada hari Minggu dan hari libur: 100% biaya tambahan Biaya perjalanan per teknisi per hari: tergantung negara Biaya perjalanan dan akomodasi, dengan bukti pengeluaran atau biaya tetap, akan dibebankan kepada pelanggan. Pengujian dengan material pelanggan: (setelah kesepakatan, hingga maksimal 750 kg) - €1.970 (harga bersih) ---- Persyaratan untuk bahan baku: - Kadar air (atro) harus antara minimal 6% dan maksimal 18% Iisdj E Dqujpfx Adysg - Panjang serpihan maksimal 20 mm - Suhu pemasangan: ruangan dengan suhu terkontrol minimal +5°C - Bahan yang dimasukkan harus bebas dari logam dan kontaminan mineral. Kerusakan pada alat pemampat dan/atau peningkatan keausan dapat terjadi.

Kondisi: sangat baik (bekas), Catalogue number 7503 TECHNICAL DATA: - Maximum planing width: 610 mm Iodpfx Adszr Ixcoyoig - Maximum planing height, double-sided: 200 mm - Maximum planing height, four-sided: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, shaft length 130 mm, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (currently equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Split metal sliding roller - Side pressure Rear section: - Side spindles + pressure devices: 2 - 1) Right vertical, 95 mm, 4 kW - 2) Left vertical, 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right - Adjustable rollers in lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction port diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight: approx. 3500 kg ADVANTAGES: – The best wide planing machine for wet and dry wood – Ideal for processing beams, flooring, etc. – Additional profiling shaft and planing (scoring) shaft – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (according to rate 4.2 EUR) (Prices may vary with currency fluctuations)

Kondisi: baru, Tahun pembuatan: 2026, Mesin Penghancur Satu Poros MRZ 530 Termasuk: Rotor Eco Ring (untuk mengurangi kebutuhan energi) Pilihan: Pengikis veneer dan kertas + €970 (harga bersih) * direkomendasikan untuk material yang sangat tipis dengan ketebalan kurang dari 3 mm Mesin penghancur satu poros mütek MRZ 530 kami menghancurkan berbagai jenis material seperti sisa kayu dari semua jenis, kayu lunak, papan serpihan dan serat keras, palet, kayu konstruksi, kayu bekas, karpet, kabel, kertas, karton, dan plastik. Mesin ini memiliki konstruksi yang kokoh, yang menjamin kualitas yang konsisten dalam pengoperasian berkelanjutan. Dengan senang hati kami menyediakan pengujian gratis dengan material Anda. Kami mengundang Anda untuk mengunjungi kami di Neckartailfingen untuk keperluan ini. Anda juga dapat mengirimkan material Anda kepada kami melalui perusahaan ekspedisi, dan kami akan mendokumentasikan pengujian dengan gambar dan video. Data mesin: Motor: 11 kW; 400 V - 50 Hz - 3 fasa, Pisau: dapat diputar beberapa kali, Diameter rotor: 260 mm, Pengendali: PLC Siemens S7-1200, Corong (mm): 510 x 810 mm, Volume corong: sekitar 0,4 m³, Penggeser yang dioperasikan secara hidraulik, Lubang saringan (10 - 40 mm), dapat dipilih, Sambungan penghisap Ø 160 mm, Berat: sekitar 1.000 kg, Dimensi: sekitar 1550 x 1100 x 1640 mm, Kadar kelembapan bahan baku: harus di bawah 30% (kadar air kering). Termasuk sebagai standar: • Sistem hidraulik cepat • Rotor profil • Kotak kontrol dengan pengendali PLC Siemens • Sistem start otomatis (bintang/segitiga) • Sistem mati otomatis saat rotor tidak beroperasi • Saluran penghisap yang dapat dilepas • Kecepatan 70 - 100 RPM untuk kinerja throughput yang lebih tinggi Ijdpfsd Db N Isx Adyoig • Pengendali siklik untuk menghindari waktu henti • Pengendali langkah yang meningkatkan kinerja penggeser hidraulik • Panduan yang stabil untuk penggeser hidraulik Pilihan tambahan untuk mesin penghancur: - Ketinggian mesin penghancur ditingkatkan 30 cm (persiapan untuk ban berjalan) + €1.980 (harga bersih) - Ban berjalan berengsel + €8.770 (harga bersih) Bagian horizontal: 1200 mm Bagian miring: 2500 mm Sudut: dapat diatur antara 0-60 derajat Ketinggian keluaran: sekitar 2000 mm + - 100 mm - Magnet pita + €5.980 (harga bersih) - Pengendali ban berjalan dan magnet pita + €2.750 (harga bersih) (Start dan stop disinkronkan dengan mesin penghancur) Persyaratan untuk bahan baku: - Kadar kelembapan (kadar air kering) harus di bawah 30% - Logam dan kontaminan mineral seperti pasir, batu, dll. akan menyebabkan peningkatan keausan.

Kondisi: sangat baik (bekas), Catalog number 7640 ADVANTAGES – The best wide planer for processing wet and dry wood – Ideal for working with logs, flooring boards, etc. – 2 planing heads + 3 spindles – Manufactured by KUPFERMUHLE, made in Germany – Used planer in very good condition TECHNICAL DATA - Max planing width: 610 mm Isdpezx Suujfx Adyjig - Max planing height: 200 mm - Top side: - Powered infeed roller, toothed - Kickback fingers - Pressure bar - 2 powered guiding rollers, toothed - Pressure bar - Planing head 610 mm, 6-knife, 15 kW - Pressure shoes - Outfeed roller, smooth - Bottom side: - Lateral pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - Planing head 610 mm, 6-knife, 7.5 kW - 2 feed rollers, smooth - Lateral pressure at outfeed - Rear side: 2 side spindles + pressure elements: 1) Right vertical 200 mm, 15 kW 2) Left vertical 200 mm, 15 kW - Left vertical spindle electric adjustment left/right - Spindle diameter: 40 mm - Spindle positions alternating - Spindles adjustable up/down, left/right 3) Additional lower horizontal spindle 160 mm, adjustment up/down + left/right, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal slip rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric planing height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8 kW - Extraction outlets diameters: 2×120 mm, 2×160 mm - Dimensions (LxWxH): 2980x1980x1800 mm - Weight approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR based on 4.2 EUR exchange rate (Prices may change subject to exchange rate fluctuations)

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 45 kg, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 30 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The LAS 22 is a compact desktop unit with a small working area, making it ideal for marking small components. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The device is very easy to operate, even without programming knowledge. With the powerful laser software, text, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after initial setup. Additionally, the software is capable of importing data (such as variable information like drawing numbers, project names, etc.) from existing tables and transferring it automatically into predefined fields. A hand scanner can also be integrated. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. - Fiber laser 30 Watt (Option: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts Iiodjzpwlmspfx Adysg - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 140 kg, panjang total: 900 mm, lebar total: 800 mm, tinggi total: 2.000 mm, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 30 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The universally applicable laser marking system LAS 28 XLe by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With its integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium, and plastics. Depending on the requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent markings, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and no advanced programming knowledge. Serial and article numbers can be incremented automatically by the software after initial configuration. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. A handheld scanner can also be used. The standard configuration includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system Isdpfxjxuvk Ee Adyjig • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Signal lamp for operating status display • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminium profile • Air cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Power connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: sangat baik (bekas), Nomor katalog 7303 DATA TEKNIS - lebar rol: 640 mm - jumlah pisau: 3 buah - ketebalan maksimum benda kerja: 250 mm atas: - ratchet - rol pengumpan bergerigi, penarik - penekan - rol pengetam - penekan - rol pengeluaran halus, penarik bawah: - rol yang dapat diatur pada meja bawah: 2 buah - motor: 7,5 kW - pengangkatan meja elektrik - motor pengangkat: 0,75 kW - 4 tingkat kecepatan umpan - motor penggerak umpan: 1,5 kW - diameter saluran hisap: 140 mm - dimensi p x l x t: 1120x1250x1680 mm - berat: 1033 kg – Diproduksi di Polandia – Mesin planer digunakan, kondisi sangat baik Ijdpjzxg S Usfx Adysig Foto asli Harga netto: 19900 PLN Harga netto: 4738 EUR (dengan kurs 4,2 EUR) (Harga dapat berubah tergantung fluktuasi kurs)

Kondisi: baru, Our SAPI pressure blasting unit, type "Mammut," with a 60-liter tank capacity, is suitable for all standard blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the built-in pressure regulator. A water separator is also permanently installed on the blasting unit, which removes moisture from the compressed air and prevents clumping of the blasting media due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off Technical data of pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate Iiodowc Afhspfx Adyog - Fixed pipework 1" internal and external - Metal cone covered with rubber and rubber gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 litres - Total height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off - Fastest switching times on and off, while complying with trade association regulations (VBG 48) - The pressure can be precisely set before the actual blasting process, infinitely adjustable from 0.1 to 12.0 bar - Reduced media consumption, as the pressure vessel remains permanently pressurized, preventing unnecessary media run-on - Upon restarting, full blasting pressure is immediately available at the nozzle without needing to build up slowly. This ensures significantly lower media consumption and considerably less wear on the blasting hose - No condensation forms in the vessel, as the tank remains continuously pressurised and is not repeatedly vented for each start and stop. This method also offers other advantages as follows: - Optimal blasting media dosing with hardened fine dosing valve - Reduced compressed air requirement, resulting in significantly lower fuel (diesel) consumption - One-man operation, as blasting pressure is constantly displayed by the vessel pressure and can easily be adjusted via the manometer without starting beforehand - No failure-prone components such as control valves, membranes or seals, making it low-maintenance and reliable. Only the blasting hose in the safety shut-off needs to be checked and replaced if necessary.

Kondisi: sangat baik (bekas), Nomor katalog 7732 DATA TEKNIS - gaya penekanan: hidraulis - bentuk briket: bulat - diameter briket: 70 mm - diameter tangki: 1200 mm - kapasitas: sekitar 70 kg/jam - mesin bekerja secara otomatis - motor: 7,5 kW - tekanan kerja maksimum: 150 bar - koneksi hisap: 90 mm - diameter lubang untuk kantong filter: 500 mm Iiedpfezw Dbksx Adyeg - tinggi maksimum kantong: 900 mm - dimensi (P/L/T): 1950x1400x2700 mm - berat: 1130 kg KEUNGGULAN – buatan Italia – dapat dihubungkan langsung ke sistem ekstraksi serbuk gergaji – mesin briket bekas – dokumentasi teknis DTR – kondisi sangat baik Harga netto: 29.900 PLN Harga netto: 7.120 EUR (dengan kurs 4,2 EUR) (Harga dapat berubah tergantung fluktuasi yang lebih tinggi)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, laju aliran volumetrik: 3.700 m³/jam, daya: 2,1 kW (2,86 hp), frekuensi input: 50 Hz, Systemair KTEX 60-35-4 ATEX Fan 2.1 kW 3700 m³ Can be Installed in Air Ducts KTEX fans feature a compact, streamlined design and a powerful, forward-curved centrifugal impeller, coupled with reliable, ATEX-certified AC motors. Power: 2.1 kW Voltage: 230/400V 50Hz 5.8/3.8A IP44 Power: 2.1 kW Maximum Airflow: 3,704 m³/h Pressure: 580 Pa Impeller Speed: 1,392 rpm Maximum Airflow: 3,704 m³/h Minimum Static Counter Pressure: 225 Pa Temperature of Transported Air: max. 40°C Maximum Temperature of Conveyed Air with Speed Control: 40°C Insulation Class: F Explosion Protection Rating: II 2 G Ex eb h IIB+H₂ T3 Gb Certificate: Presafe 17ATEX9970X Ambient and Cable Temperature: -20 to 40°C Dimensions and Weights: Iisdsvu Hrkopfx Adyog Inlet (H x W): 350 x 600 mm Outlet (H x W): 350 x 600 mm Weight: 42 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), tegangan masuk: 380 V, gaya penekanan: 60 t, panjang langkah: 150 mm, lebar meja: 500 mm, panjang meja: 900 mm, berat keseluruhan: 5.600 kg, penyesuaian langkah: 75 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, apa60-exzenterpresse-verkauf Iiodju Hav Ropfx Adyog