Beli Mütek Systemtechnik Mpp 60 bekas (22.154)

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Hodpfx Aegl Nlmjhnofh Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang. Hjdpov Rpxljfx Ahnsfh

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. Hfodegfm Ryepfx Ahneh The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers Hodpfxsffh Ats Ahnefh + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Hfjded Su Hxjpfx Ahnoh Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Hfsdpfxerb D Ns Ahnoh Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Hfjdpfxschuvrs Ahnoh

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Hfedjdwktkepfx Ahnjh Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Hfsdegmfa Aopfx Ahneh Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, en-GB Hfsdped Nm Sisfx Ahneh

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. Hfsdpfx Aochqxxohneh - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, en-GB Hfsdsxfwdspfx Ahnsh

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Hsded N Dnhjpfx Ahnjfh

Tahun pembuatan: 2023, Kondisi: baru, en-GB-1 Hedpfekuz Tuox Ahnefh

Kondisi: baru, Tahun pembuatan: 2025, Ideal for shredding straw, polystyrene foam (EPS), leaves, hay, and bread. Throughput is highly dependent on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW, 400 Volt (alternatively 9.2 kW or 15 kW available upon request) Optional: *Surcharge for next largest machine with 18.5 kW and larger silo diameter: + €2,750 net Robust steel construction Hardened cutting blades Screen with interchangeable inserts Available perforations: 10, 15, 22, 26, 30, 40, or 60 mm When equipped with electric drive: star-delta switch, overload protection, and 8 m ready-to-plug power cable Blow-out nozzle, 150 mm diameter Suitable for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and a swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (LxWxH) Weight approx. 240 kg Spare part prices and options: 24 hardened blades, €9.90 each net 6 bolts, €14.90 each net 1 screen, €475 net Hfodpfszbizox Ahnjh Lid, €290 each net Polystyrene disk, €600 each net

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Ideal for shredding Styrofoam or similar materials Throughput highly dependent on screen size and input material: - Up to 60 kg/h with EPS using a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW - 400 Volt Robust steel construction Hardened cutting knives Screen with interchangeable inserts Available perforations: (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive equipped with star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 150 mm Hodpfsh S H T Ujx Ahnofh Optional for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (L x W x H) Weight approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Tahun pembuatan: 2020, jam operasional: 100 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 300 kg, panjang total: 1.330 mm, lebar total: 840 mm, tinggi total: 1.870 mm, sambungan udara terkompresi: 6 batang, jenis arus masuk: AC (pendingin udara), TL-6040 Hjdexuqtbepfx Ahnofh

Kondisi: baik (bekas), Schmedt PraLeg XL 18-60 Mesin Pasang Blok Buku + Schmedt PraForm 21-50 Mesin Press Buku Dibuat tahun 2022. Schmedt PraLeg XL 18-60 Penggantung Buku Mesin dalam kondisi baik, siap digunakan. Mesin ini digunakan untuk memasukkan blok buku ke dalam hardcover yang sudah disiapkan. Dilengkapi dua unit lem, dengan pengaturan ketebalan lem yang halus. Format: Tinggi blok: 80 – 450 mm Lebar blok: 110 – 450 mm Hodpfx Ahjzdazbonofh Tebal blok: 2 – 80 mm Kapasitas produksi: sekitar 200 – 300 pcs/jam Daya listrik: 230V Berat: 300 kg Dibuat di Jerman. Schmedt PraForm 21-50 Mesin Press Buku Press buku dengan pemotong alur. Dibuat oleh Schmedt, Jerman. Mesin dalam kondisi sangat baik, siap produksi. Spesifikasi teknis: Format maksimum: 420 x 520 x 100 mm Berat: 220 kg Daya listrik: 230 V + udara tekan. Harga untuk satu set dua mesin.

Kondisi: baik (bekas), Sumbel Perkeo 60 Mesin Lem Tepi Berfungsi penuh dan siap untuk produksi. Merek yang paling dihargai di antara laminator kecil. Ideal untuk produksi sampul, kemasan dekoratif, dll. Hfjdpfozdawpox Ahnsh Dibuat di Jerman. Mesin menggunakan lem dingin. Roller tembaga. Pengaturan halus: ketebalan lem dan lebar celah. Pembersihan mudah tanpa perlu alat. Daya: 230V Berat: 15kg Lebar roller: 60mm

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 45 kg, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 30 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The LAS 22 is a compact desktop unit with a small working area, making it ideal for marking small components. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The device is very easy to operate, even without programming knowledge. With the powerful laser software, text, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after initial setup. Additionally, the software is capable of importing data (such as variable information like drawing numbers, project names, etc.) from existing tables and transferring it automatically into predefined fields. A hand scanner can also be integrated. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. - Fiber laser 30 Watt (Option: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures Hodjwkpxkopfx Ahnsfh - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.550 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide variety of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after prior configuration. Furthermore, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., can also be implemented. Made in Germany Fiber laser 30 Watt (optionally 20 Watt or 50 Watt) • Laser class 1 • Wavelength 1064 nm • Marking field size 150x150 mm (larger sizes optional) • Signal tower for operating status indication • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction system (incl. activated carbon filter) • Optional: digital height measurement system • Optional: autofocus system for automatic determination of focal distance • EZCAD marking software in German/English (other software available on request) • Pilot laser (easy preview, plaintext preview) • Focus finder (easy focus adjustment) • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and keyboard tray, height adjustable • Frame made of aluminum profile Hfedpfewlc Stjx Ahnjh • Air cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • 230V connection • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH), with monitor holder approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.550 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, en-GB Hodewkpx Rspfx Ahnjfh

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya laser: 30 W, jenis pendinginan: udara, berat keseluruhan: 45 kg, jenis penyesuaian ketinggian: listrik, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, The LAS 22 is a compact benchtop device with a small working area, ideally suited for small parts. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The LAS 22 universal laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With its integrated fiber laser, you can mark nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with either a 20 or 30-watt fiber laser. For permanent marking, the use of the laser is essential in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and part numbers once set up. Additionally, it can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. A hand scanner can also be used. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20-watt) - Laser class 1 - Wavelength: 1064nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (simple preview, contour preview) - Focus finder (easy focusing) - Max. part height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm Hodpeuy H Nqsfx Ahnefh - Electrically adjustable Z-axis - Electrically operated door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 400 mm, tinggi total: 690 mm, panjang total: 600 mm, berat keseluruhan: 45 kg, jenis penyesuaian ketinggian: listrik, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, kebutuhan tinggi: 900 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, The LAS 22 is a compact tabletop unit with a small working area, making it ideal for small components or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The unit is very easy to operate and requires no programming knowledge. With its powerful laser software, you can create text, numbers, 2D codes, QR codes, and logos with just a few clicks—all without extensive programming skills. The software can automatically increment serial and article numbers after prior configuration. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Use of a hand scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English Hsdpoy I Nbmsfx Ahnefh - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: exhaust system (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Kondisi: sangat baik (bekas), Catalogue number 7503 TECHNICAL DATA: - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Maximum planing height, four-sided: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, shaft length 130 mm, 2.2 kW Hedozact Espfx Ahnjfh - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (currently equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Split metal sliding roller - Side pressure Rear section: - Side spindles + pressure devices: 2 - 1) Right vertical, 95 mm, 4 kW - 2) Left vertical, 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right - Adjustable rollers in lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction port diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight: approx. 3500 kg ADVANTAGES: – The best wide planing machine for wet and dry wood – Ideal for processing beams, flooring, etc. – Additional profiling shaft and planing (scoring) shaft – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (according to rate 4.2 EUR) (Prices may vary with currency fluctuations)