Beli Romer Kompleksowe Lakiernie Proszkowe bekas (159)

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. Nodpfxjfz Dube Aa Uolb In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, Nlsdpfofz Dt Nex Aa Ujb This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. Njdpsfz I Edofx Aa Uolb By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. Nodpfxsfz Nb To Aa Ujlb - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, Nodpfx Aasfz U S Ee Ujlb This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean Nodpfefz U Nuox Aa Uolb

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard Nedpjfz U Rcsfx Aa Uolb • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h Nledpfofz Dknsx Aa Usb • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor Nedpefz U Rrjfx Aa Uolb • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Nedpfxsfz Ndye Aa Uolb Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste Nsdpfx Aofz U Saoa Uelb • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Njdpfeflrc Sex Aa Uslb Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol Nedpfefz U Swsx Aa Uolb • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2026, Kondisi: baru, powder-coating-booth-kph-de Nljdofz Atbopfx Aa Usb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Dijual lini pengecatan powder coating Romer. Peralatan produksi tahun 2022, jarang digunakan. Digunakan untuk pengecatan pintu baja. Lini powder coating terdiri dari: 1. Oven (pintu di kedua sisi, 5 rel pengecatan) Model: Romer SW Dimensi interior: 3000 x 1500 x 2200 mm Oven tidak dilengkapi burner pemanas, sebelumnya menggunakan gas. Dapat dipasang burner gas maupun listrik sesuai kebutuhan. 2. Dinding penangkap cat Romer Nledpjyzw Hwjfx Aa Ueb Model: Romer KPO-3ZN 3. Sistem transportasi Dimensi total: panjang 5900 mm x lebar 14000 mm, 2 trolley masing-masing 5 rel. 4. Traverse dengan roda (20 unit) Saat ini lini sudah dibongkar dan siap untuk dikirim.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 12 h, daya: 30 kW (40,79 hp), tegangan masuk: 380 V, suhu: 200 °C, panjang dalam: 1.200 mm, lebar dalam: 1.700 mm, tinggi dalam: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.200 mm, tinggi total: 2.800 mm, berat keseluruhan: 400 kg, Jumlah ruang: 1, jenis kontrol: Dikendalikan oleh PLC, Perlengkapan: Penandaan CE, Professioneller Verbundwerkstoff-Härtungsofen – Romer SL Innenmaße: 1200 × 1700 × 2300 mm Nodpfx Aaoy Tvvzs Uelb Leistungsstarker Industrieofen zur Härtung von Verbundwerkstoffen des renommierten polnischen Herstellers Romer. Entwickelt für fortschrittliche Herstellungsprozesse wie das Härten von Carbonfaser-Prepregs, Trocknung, Nachhärtung und thermische Verarbeitungsanwendungen. Dieser elektrische Kammerofen eignet sich ideal für die Produktion in der Luft- und Raumfahrt, Automobilindustrie, im Schiffbau, Motorsport und in industriellen Composite-Fertigungen, bei denen genaue und stabile Temperaturregelung unerlässlich ist. Die Konstruktion umfasst einen stabilen Stahlrahmen, Edelstahlauskleidung im Innenraum sowie eine robuste, pulverbeschichtete Außenverkleidung für dauerhaften Industrieeinsatz und hohe Betriebssicherheit über viele Jahre. Das intelligente Steuersystem gewährleistet präzises Temperaturmanagement, energieeffizienten Betrieb sowie zuverlässig gesteuerte Beheizungs- und Abkühlungsphasen. Das integrierte Umluft- und Belüftungssystem sorgt für eine gleichmäßige Wärmeverteilung im gesamten Kammervolumen – für konstante Aushärtequalität. Wesentliche Merkmale: • Maximale Betriebstemperatur: 200°C • Innenmaße: 1300 × 1800 × 2000 mm • Speziell für Prepreg-Verbundanwendungen entwickelt • Robuste Industrieausführung • Innenkammer komplett aus Edelstahl • Hochleistungs-Umluftsystem • Präzise, programmierbare Temperatursteuerung • Mehrstufige Härtungsprogrammierung möglich • Geregelte Heiz- und Abkühlzyklen • Gleichmäßige Temperaturverteilung • 8 Vakuumanschlüsse im Innenraum installiert • Vakuumpumpe im Lieferumfang enthalten • Geeignet für Carbon, GFK, Prepreg, Werkzeuge und Composite-Bauteile Anwendungsgebiete: • Härten von Carbon-Prepregs • Herstellung von Verbundbauteilen • Komponenten für Luftfahrt und Motorsport • Produktion von Schiffbau-Composites • Nachhärtung von Werkzeugen und Formen • Trocknungs- und Thermobehandlungsprozesse • Forschung, Entwicklung und Prototypenbau Der Ofen befindet sich in sehr gutem Betriebszustand. Eine Besichtigung und Funktionsprüfung vor Ort ist möglich.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), jenis bahan bakar: diesel, warna: hitam, berat operasi: 500 kg, berat muatan maksimum: 800 kg, tinggi angkat: 3.800 mm, konfigurasi gandar: 2 gandar, Tahun pembuatan: 2024, nomor mesin/kendaraan: WD1-800, WD1-800 Twin-Wellen-Mischer mit Austrag – Beinlänge 3800 mm Fernbedienung --- Technische Daten: Modell: WD1-800 Twin-Wellen-Mischer Chargenvolumen: 500 L Kapazität: 800 L Leistung: 25 m³/h Körnung: 60–80 mm Paddeldrehzahl: 26 U/min Anzahl Mischpaddel: 2 × 7 Leistung Mischmotor: 18,5 kW Leistung Hubwerksmotor: 5,5 kW Leistung Wasserpumpe: 1,1 kW Korbhebegeschwindigkeit: 18 m/min Abgabehöhe: 3800 mm Abmessungen: 4900 × 2900 × 4200 mm --- Ausstattung: Mischergetriebe Mischmotor Hubwerksgetriebe Hubwerksmotor Schmiersystem – Ölpumpe Wasserpumpe Nlsdpfx Asv H D S Eja Uob Innenverkleidung Pneumatische Entleerung Rahmen Tragkonstruktion – Stahlbeine Austragskorb Arbeitsbühne Hubschiene Handlauf Leiter

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KAP1, kebutuhan udara: 16.000 m³/jam, daya: 36 kW (48,95 hp), kapasitas hisap: 16.000 m³/jam, Perlengkapan: kabin, Dielektrische automatische Pulverbeschichtungsanlage KAP1 Preis: 492.693,30 PLN + MwSt. Elektrische und Energiedaten • Spannung: 400 V (3P + N + PE) • Anschlussleistung: 36,34 kW • Pneumatikanschluss: 1" • Luftdruck: mind. 6 bar • Luftqualität: Öl < 0,1 mg/m³, Wasserdampf < 1,3 g/m³ • Luftverbrauch: 1.710 Nl/min (Betrieb) • Kompressor: SC-30 • Lufttank: 1.800 L Lackierparameter • Beschichtungsgeschwindigkeit: 1.933 mm/min • Bauteilmaße: 800 x 1.800 mm • Aufhängehöhe: 500 mm • Schichtstärke: 100 µm • Pistolenanordnung: vertikal Technische Daten und Ausstattung • Ausführung: dielektrischer Kunststoff • Durchgangsmaße: 1.000 x 2.400 mm • Luftdurchsatz: 12.348–16.000 m³/h • Pulverzentrum: ProfiCenter CP02 • Manipulatoren: 2 Stk. • Pistolen: 8 automatisch, 2 manuell (ProfiSpray) • Werkstückerkennung: ja (Höhe, Breite) • Systeme: Zyklonabscheider, ProfiControl, Traversenzug • ATEX: Zone 22, II 3D Plattformen und Kabinenkörper • Plattformen: Ein- und Auslauf, Edelstahlboden, rutschhemmende Treppen • Verkleidung: dielektrischer Kunststoff, LED-Beleuchtung, Aussparungen für Manipulatoren Luftmesser und Absaugkanal • Automatische Bodenreinigung • Absaugkanal mit pneumatischer Klappe Pistolenabblasung und Steuerung • Automatisches Pistolenabblasen • 10" Touchpanel, 50 Programme, Manipulatorsteuerung, Absauganlage, Fahrgeschwindigkeit X-Achse und Werkstück-Zug • Automatische Pistolenpositionierung • Werkstück-Zug: Geschwindigkeit 570–2.830 mm/min, 2 Zugvorrichtungen Die Maschine beinhaltet außerdem: • ProfiSpray A Applikator Njdpfx Aaov Rpx Ss Uelb • PSS-1 Steuergerät • PM-1 Pistolen • ProfiCenter CP-02 Pulverzentrum • CK-D1400L Zyklon-Absauganlage • MA1-180 Manipulator und MX1-10 X-Achse • OZ-12H Absauganlage • ProfiControl 10" Steuerung • BP-H2000 W900 Werkstück-Messsystem

Kondisi: baru, Tahun pembuatan: 2024, de Nlsdpfx Aajflpi Ne Ueb

Kondisi: baru, Tahun pembuatan: 2026, de Nodpfx Asyfik Ioa Uolb

Kondisi: baru, Tahun pembuatan: 2026, de Nsdpoyfim Aofx Aa Uslb

Tahun pembuatan: 2025, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. Nedjfx Nfmepfx Aa Uslb High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Njdpfxjfz Dvcs Aa Ujlb Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches • Control system for reliable sealing and full opening of dampers • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix Nljdpfxsfz I Hxj Aa Uob • Fully automatic operation

Tahun pembuatan: 2020, Kondisi: baru, Washing machines and ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to prevent heat loss and enable faster heating. High-quality materials ensure long service life of the vibrating elements. Heating system Nljdpfefz I N Tsx Aa Ujb The heating elements used in ROMER tanks are made from top-grade materials and high-temperature resistant ceramic components. The heating system ensures high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic transducers The ultrasonic elements used in ROMER cleaning machines are installed in immersion modules, which better reflect vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the item being cleaned; lower frequencies are used for large, robust parts and higher frequencies for jewelry, delicate mechanical systems, etc. All transducers are connected by high-temperature resistant cables.