Beli Ruchser Montagetisch Ruchser Ru-Msa bekas (3.625)

Kondisi: bekas, Tahun pembuatan: 2013, de-2024-06-16-01 Hedjyx Hpcspfx Agkonn

Kondisi: baru, Dimensions (L x W), mm Weight approx. 90 kg Adjustable height (yes/no): yes Lift: 300 - 800 mm Worktable support surface: 1,700 x 1,500 mm Maximum table width: 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP Turn-Tip Table ----- Support surface: 1,700 x 1,500 mm, maximum table width (swung out): 3,800 mm, pneumatically tiltable, cut-out for window rebate, equipped with 6 storage bins each with 2 compartments, extendable lower sections for width extension, with 2 support legs and 2 flat clamping cylinders, lift mechanism from 300 - 800 mm, roller conveyor as a setup surface, foldable. Payload capacity 130 kg. Travel gear with 4 swivel castors with locking device (RU-4SSP) 2 stops for final inspection and sealing Sash assembly jig with tool shelf and adjustable stop for tilting position for RU-4-SSP Holder for drilling machine, screwdriver gun, etc., with screwdriver holster Travel gear with flanged track rollers RU-DKFA and RU-4SSP Hedjvu Hfdepfx Agksnn 3 double metre travel rail for drive unit 25 x 10 mm ----- Price for the above-mentioned machine upon request! Plus packaging and shipping ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Dijual 2 unit troli transportasi profil Ruchser. Memiliki 12 kompartemen masing-masing lebar 90 mm – namun dapat disesuaikan secara tak terbatas. Lebar: 850 mm, panjang: 1900 mm. Tinggi troli transportasi: 1800 mm. Hodpfx Agoy Dfq Askenn

Kondisi: baru, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Hnodpfx Aexmkz Nsgken Glazing Bead Saw on Sliding Work Table Designed for the simultaneous cutting of pairs of glazing beads on the sliding work table. The RU-GL glazing bead saw is mounted on a sliding work table with scanning and clamping devices for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a carriage, manually movable. Pneumatic clamping from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning sash frames. Pos. 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H) !!! Mounted on sliding work table with scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a manually movable carriage. Pneumatic clamping from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning sash frames. ----- Base price in the above configuration: on request! ----- Price ex works plus packaging, shipping, and current material surcharge of 6% on the total price Options at additional cost: ----- Pos. 1.1 1 set of carbide-tipped saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, comprising 1 pc blade L1233 (left) and L1085 (right), with special 43° grind. Additional cost: 502.00 Euro Pos. 1.2 Holder for scanning gauge for RU-GL for transferring the measured values to the saw with pneumatic installation. Additional cost: 635.00 Euro Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made from square tube profile with 2 fixed and 2 adjustable cams for scanning glazing bead length Additional cost: 497.00 Euro Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made from square tube profile with 2 fixed and 2 adjustable cams for scanning glazing bead length Additional cost: 445.00 Euro Pos. 1.5 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after inspection of the glazing beads. Depending on the number of different types of glazing beads used, several spacer sets may be required. To determine the exact number, we require profile drawings of the intended glazing beads prior to order confirmation. Additional cost: on request, after submission of your glazing bead drawings Pos. 1.6 Operating time switch for independent extraction system. Adjustable from 5 sec. to 3 hours. At each sawing operation, the extraction runs for the preset time. If sawing takes place again within this time, the extraction timer resets. Additional cost: 731.00 Euro ----- Total price ...

Kondisi: baru, Arbeitslänge 2750 mm Arbeitshöhe 2500 mm Hub des Arbeitstisches 300-1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical work table with lifting mechanism and tilting device. Particularly suitable for glazing and double-sided sealing of wooden windows. Features: • Workpiece support surface covered with felt • Stepless pneumatic lifting mechanism, stroke from 300 mm to 1000 mm, referenced from roller conveyor height Hnodpsxmk D Refx Agken • Tilting device for double-sided sealing, with conveyor rollers, 150 mm roller length • 2 pneumatic clamps for securing the window in the tilting device • Version with special tilting device allowing window to be pushed through on roller conveyor while tilting device is closed Alternative/optional configurations available on request! Pos. 1.0: Article No.: 100000 RU-SW3-90° Vertical Work Table for Wooden Windows with Tilting Device for Glazing and Double-sided Sealing Angle section length: 1970 mm, opening angle 90°, max. working width: 2750 mm, total length: 3050 mm, total width: 780 mm, support height: 1600 mm, support surface with felt, with a roller (left OR right) as edge protection for items up to 2500 mm high. Pneumatic lifting mechanism from 300 to 1000 mm. Setup surface as roller conveyor with steel rollers, roller length and spacing 200 mm. ----- Total price for this configuration: on request! ----- Options with additional charge: Pos. 1.1: Article No.: 5202 EUR 773.00/each Support element fitted with rubber rollers Ø 48 mm, spacing 50 mm, for RU-SW3-90° and RU-SWS3 Pos. 1.2: Article No.: 7081 EUR 440.00/each Steel angle bar covered with felt, mounted above the roller strips, for RU-SW3-90°. Prevents “rattling” of windows during movement. The additional strips are mounted above all roller strips of the RU-S2. Pos. 1.3: Article No.: 5056 EUR 147.00/each RU-AK-6 storage box 1000 x 120 mm, 6 compartments, for hanging on the roller conveyor ----- Total price for this configuration: on request! Ex works, plus packaging and shipping, plus statutory VAT. PDF brochure attached. (Technical data as per manufacturer's information – subject to change without notice!)

Kondisi: baru, de-en-tech-001 Hnsdst Tq Aaspfx Agkjn

Kondisi: baik (bekas), Tahun pembuatan: 2010, de-hu-it-lt-lv-nb-nl-pl-001 Hnedpfsyapglox Agkon

Kondisi: baru, Staple length, mm Staple width (crown width), mm Impact energy, Nm Painting aid for simultaneous coating of sash and glazing bead frame RU-LH Painting Aid for Glazing Bead Frames For processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. One staple is inserted at each of the 4 corners of the glazing bead frame. The positioning is diagonal so that the staples protrude about 35 mm from the wood. When pressed into the sash frame, a clamping effect occurs. For painting, the glazing bead frame is positioned about 20 mm in front of the sash. After drying or prior to sash assembly, the glazing bead frame is pressed flush into the sash and is removed again only before glazing. The staples can then be pulled out by hand. Stand frame with support table vertical at 85°, inclinable. Two compensating frames for different glazing bead thicknesses, operated via foot pedal. Price on request plus packaging and shipping Hnodpfx Agexpi Efoksn Option at extra charge: Box of staples 26 x 50 mm, 4,300 pieces each: EUR 77.00 Pictures of the painting aid can be found at the end of the adjacent video! (Technical specifications according to manufacturer – subject to change without notice!)

Kondisi: baru, Number of motors: 2 units Working length: 2,650 mm Control: manual Ruchser RU-GLS-ED 45° Glass Beading Saw ----- Designed for paired cutting of glass beads The RU-GLS-ED45° Double Glass Beading Saw is manually adjustable to the desired size. The machine is designed for the paired cutting of glass beads at a cutting angle of 45° and is equipped with one fixed and one movable saw unit. The manual length adjustment is fitted with an electronic digital display. Cutting lengths from 150 mm to 2,650 mm can be processed. During cutting, the glass beads are clamped from above and from the front with a pneumatic clamping device to prevent tilting. Operation is via safety two-hand control. Saw blade diameter: 250 mm, length: 3,700 mm, width: 700 mm, voltage: 400 V. Item 1: RU-GLS-ED45° Double Glass Beading Saw ----- with manual dimension adjustment, for paired cutting of glass beads, cutting angle 45°. Manual length adjustment with electronic digital display, cutting lengths from 150 to 2,650 mm. Pneumatic clamping from above and front. Safety two-hand operation, saw blade diameter 250 mm, length 3,700 mm, width 700 mm, voltage 400 V. ----- Base price for the above configuration: on request! ----- Ex works. Packing and shipping extra. Options and Surcharges: ----- Item 1.1: Shim set for rebated glass beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after examining the glass beads. Depending on the number of bead types used, multiple shim sets may be required. To determine the exact quantity required, we need profile drawings of the glass beads to be used before order confirmation. Surcharge: on request, after receipt of your bead drawings Item 1.2: Fixture for measuring gauge transfer for RU-GL to transfer the measured length to the saw, with pneumatic installation. Surcharge: 611.00 EUR Item 1.3: Measuring gauge for glass beads, total length 2,550 mm, max. measuring length approx. 2,450 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for scanning glass bead length Surcharge: 478.00 EUR Item 1.4: Measuring gauge for glass beads, total length 1,500 mm, max. measuring length approx. 1,430 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for scanning glass bead length Hjdjxmk Dqspfx Agkjnn Surcharge: 428.00 EUR Item 1.5: Operating time switch for independent extraction Adjustable from 5 sec. to 3 hours. With every sawing operation, extraction runs automatically for the pre-set time. If another cut is made during this period, the timer resets. Surcharge: 702.00 EUR Item 1.6: 1 set of carbide saw blades for RU-GLS-P45 and RU-GLS-ED45°, D = 250 mm x 3.2/2.2 x 30, 80 teeth, consisting of 1 piece saw blade L6444 (right) and L6443 (left), special 43° grind. Surcharge: 576.00 EUR ----- All prices in EUR, net, plus VAT. (Technical information according to manufacturer, without guarantee!)

Kondisi: baru, Dimensions (L x W): 1400 x 1750 mm Weight: kg Swivelling: yes/no – yes RUCHSER Assembly Tilting Table RU-MKS 1.4 ----- Universally usable work table, e.g. for frame assembly, roller shutter box assembly, glazing bars, sash fitting, and glazing. Equipment, alternative/optional equipment available upon request! Pos. 1.0: Article No.: 8820000 RU-MKS-1.4 Assembly Tilting Table Basic dimensions: 1400 x 1750 mm, extended: 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one fixed on the upper extension, covered with felt. Support surface with width and height/depth extension. Pneumatic tilting mechanism, load capacity 130 kg. Operation via foot pedal. Roller conveyor manually foldable and laterally extendable from 1400–2500 mm; roller length 140 mm (closed). Roller conveyor height in vertical table position adjustable from 300–380 mm, working height (horizontal) adjustable from 920–970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Article No.: 5582 Pneumatic swivel mechanism for roller conveyor for MKS Pos. 1.2: Article No.: 21127 Support bar 1400 mm non-extendable for RU-MKS Pos. 1.3: Article No.: 5585 360° rotary mechanism with pneumatic locking in 180° increments Hnodpfx Asx H Al Ajgksn Rotary brake operable from both sides When using the rotary mechanism, the minimum roller conveyor height of the MKS table increases to 330 mm Pos. 1.4: Article No.: 6455-01 6 storage boxes, each with 2 compartments, mounted swivellable; for RU-MKS Pos. 1.5: Article No.: 5597-10 Travel mechanism for semi-circular running rail for RU-MKS-P4 Operated by foot pedal, mounted on the roller conveyor side. Pos. 1.6: Article No.: 6354-6 3 dual meter semi-circular running rails 30 x 10 mm Pos. 1.7: Article No.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, retractable mounted on support bar, with felt on contact side, installation left or right – please specify. Pos. 1.8: Article No.: 5584 Lifting device 450 mm for working on vertically standing elements. Operated by foot pedal. Maximum load capacity: 200 kg for RU-MKS...-1.4 and 140 kg for RU-MKS...-2. Pos. 99.1 Packaging on pallet ----- Total price for this configuration: on request! Video and PDF brochure attached. (Technical specifications according to manufacturer – without guarantee!)

Kondisi: sangat baik (bekas), Roller conveyors available in lengths of 5000 mm and 6000 mm, width 600 mm, equipped with either felt or roller beds for staging. Multiple units available! Please inquire. Hjdpsmt D Rajfx Agkenn

Kondisi: baru, Perangkat genggam manual, Y/T Otomatis untuk batang tunggal Ya Y/T Otomatis untuk bingkai Ya Y/T RUCHSER Mesin produksi jendela Pemasangan klip pada jendela kayu-aluminium secara in-line dan pada meja penahan daun jendela. Video di bawah ini menunjukkan: 1. Mesin otomatis pemasang klip terpasang pada meja penahan daun jendela 2. Pemasangan klip pada rangka yang sudah dipres secara in-line 3. Pemasangan klip pada bagian tunggal secara in-line Hnodpfxeytx T Ue Agken Brosur dengan deskripsi tersedia dalam dokumen PDF terlampir. Harga berdasarkan permintaan! (Spesifikasi teknis sesuai dengan pabrikan - tanpa jaminan!)

Kondisi: baik (bekas), Tahun pembuatan: 2020, Tersedia 2 unit! Sistem rak penyimpanan belakang dengan 4 rak berukuran 650x300mm dan 4 lengan penopang untuk bagian panjang Panel belakang berlubang Hnedpfx Aszab Smogksn Penerangan area kerja Sistem pengatur ketinggian dengan handwheel (penyetelan halus per 5mm/putaran) Perlengkapan penjepit pneumatik untuk menjepit profil satuan dalam proses pemasangan fitting, dapat diputar 180°, penguncian pada setiap 30°, penguncian dioperasikan secara pneumatik Posisi penjepit dapat diatur sepanjang profil Rentang penjepitan untuk profil dengan kedalaman konstruksi 45-120mm dan lebar kerja 50-150mm, masing-masing dapat diatur dalam interval 7mm 4 koneksi pneumatik, 5 koneksi listrik, 2 dudukan untuk bor tangan atau obeng, dapat dipindahkan pada penarik alat Ekstraksi alat setengah lebar meja di kanan

Kondisi: baru, Glazing Bead Stapler "2 P Jumbo automatic E.C." - new - Your advantages: - Corner joints are closed - No open glazing bead joints - No color differences during painting - Glazing bead frames are easy to assign 2P Jumbo Automatic E.C. Stapler for Glazing Bead Frames Choice between automatic and manual operation mode; Equipped with angle stop, clamping device from top and front Hnedpfxovnh T Ne Agkjn Pressure can be adjusted separately. Insertion of parallel and stacked staples is possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot pedal. ----- Price in this version on request! Plus statutory VAT as well as packaging/shipping ----- Pictures show the 2P Staple Corner Joining Machine with option movable work table (see details under additional charges) Additional Charges: ----- Movable Work Table Height-adjustable from 700 - 1000 mm, 2 removable support rails, 1000 mm long, 2 swiveling and laterally adjustable support rails, 1000 mm, support rails covered with felt, 4 swivel castors, 2 with locking function. ----- Additional charge: EUR 1,311.00 net Staples: Packages 15 mm staples (pack of 2,000 pcs.): Price EUR 22.00 12 mm staples (pack of 3,000 pcs.): Price EUR 32.00 10 mm staples (pack of 3,000 pcs.): Price EUR 32.00 Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical specifications according to manufacturer – subject to change!)

Kondisi: baik (bekas), Tahun pembuatan: 2022, jenis bahan bakar: listrik, CE marking: yes Technical condition: good Visual condition: good Contact Tobias Mayr for further information. Uplifter UPG-600-2 Vacuum Lifter Glass Lifter up to 600 kg The UPG 600-2 glass lifter is specialized for lifting and handling glass elements up to 600 kg. Thanks to its modular design, the UPG 600-2 can be optimally adapted to requirements on site. Its extension arms allow for easy handling of large-surface elements. The support arms can, of course, be removed. The attached suction pads (diameter 300 mm) ensure secure adhesion and effective performance on the job site. When suctioning, it is essential that the surface is smooth, flat, and non-porous. The suction process is carried out automatically at the push of a button. After suctioning, the UPG 600-2’s vacuum system continuously and independently monitors vacuum pressure. Should there be any vacuum loss, the UPG 600-2 automatically re-pumps and provides an additional audible warning signal in case of impending vacuum loss. With its independent power supply, the UPG 600-2 is the ideal assembly partner. The replaceable 12 V battery is rechargeable, and the charge status is easily visible on the LED display. Furthermore, the regulated vacuum pump ensures up to 8 hours of continuous operation. The vacuum lifter can be adjusted to individual installation situations. The suction system can be manually rotated 360° and tilted 90°. During rotation, the lifter can be locked every 40°. Manufacturer: Uplifter Model: UPG 600-2 Hodpfx Agjy Ttqiekenn Year of manufacture: 10/2022 Net weight: approx. 173 kg Lifting capacity: up to 600 kg Dual-circuit system Device depth min. 150 mm Manual rotation 360° (locks every 90°) / tilting without locking Complies with DIN EN 13155 Including mobile transport frame – see photos Miscellaneous: Low-cost delivery available Europe-wide. Inspections by appointment only. We are happy to accept your equipment/machinery as trade-in. We can offer you tailored financing or leasing options (for commercial customers only). Please contact us if you have any questions. All prices ex location 86684 Holzheim. All information subject to change and errors in transmission and printing, and subject to prior sale. All details regarding color, equipment, condition, features, etc., of the listed vehicles are given without guarantee. Subject to errors, misprints, and prior sale.

Kondisi: baru, In the accompanying PDF you will find the description of the items – prices on request! RUCHSER standard package with layout for a wooden window production line featuring grooved glazing beads and screwed corner joints. Daily capacity approx. 15 windows Production line consists of: Item 1.0 – Article 107850000 RU-PWD-H1600/130/4 Double-sided profile trolley Length 1600 mm, width 850 mm, height 2140 mm For the horizontal storage and transport of profile cuttings. 12 storage arms per column, permanently welded to the column, 2 central columns adjustable, clear spacing of storage arms 130 mm, arm depth per side 400 mm, storage arms covered with felt, 4 plastic swivel castors, diameter 150 mm, 2 with brakes. Item 2.0 – Article 0150001 RU-M Tilt-and-turn table Manually tiltable, support surface 1300 x 1400 mm, with 4 plug-in extensions each 1000 mm long, including tool tray, without weatherbar recess. Item 2.1 – Article 5009-1 2 storage bins each with 2 compartments (for RU-4; RU-2/4) Item 2.2 – Article 5062-1 Extension to left and right 500 mm to the sides and upwards 7000 mm Each with a foldable support leg Item 2.2 – Article 5012-1 Swiveling extension tubes Length 700 mm (max. 3 pairs) Item 2.4 – Article 6125-2 Corner assembly device As right-angled stops, pneumatically lowerable with clamping unit for 2 profiles; mounted on RU-M Item 2.5 – Article 2069-1 Tilting mechanism Instead of manual, pneumatically operated Item 3.0 – Article 10782000 RU-EW-2S Double-sided storage trolley Storage capacity max. 36 sash frames in L-shape screwed, length 1200 mm, depth 800 mm, height 2200 mm, support beams covered with felt, 4 swivel castors, 2 with brakes Item 4.0 – Article 6600000 RU-KWI-1000 Order picking trolley Can be nested when empty, length 1120 mm, width 1100 mm, usable width 850 mm, height 1900 mm, support height 1500 mm, load capacity 750 kg, mobile on 4 plastic swivel castors, diameter 150 mm, 2 with brakes, 2 pull-outs left and right each 350 mm long, max. 1800 mm, and height max. 2100 mm Item 5.0 – Article 740-300 RU-DH-F2 Double coil trolley for 2 rolls For roll size up to 620 x 350 mm (without spool), up to 800 x 350 mm (with spool), with 4 swivel castors, 2 with brakes Item 5.0a alternative to Item 5.0 – Article 744-200 Hnsdpfxsytx Urs Agksn RU-DH-F4 Double coil trolley for 4 rolls For roll size up to 620 x 350 mm (without spool), up to 800 x 350 mm (with spool), with 4 swivel castors, 2 with brakes Item 6.0 – Article 7360000 RU-BW-1200 Fitting trolley With 16 compartments, Length 1200 mm, width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 plastic swivel castors with a diameter of 125 mm, 2 with brakes Item 7.0 – Article 10009200 RU-FMOG/K Sash assembly tilt-and-turn table

Kondisi: baru, Ruchser standard offer with layout for a wooden window production line with milled glazing bead and screwed corner connection. Daily capacity approx. 30 windows Production line consists of: Item 1.0 – Article 107850000 1 piece RU-PWD-H1600/130/4 profile cart, double-sided, length 1600 mm, width 850 mm, height 2140 mm. For horizontal storage and transport of profile cuttings. 12 pairs of support arms per column, permanently welded to the column, 2 center columns adjustable, clear distance between the support arms 130 mm, depth of the support arms per side 400 mm, support arms padded with felt, with 4 plastic swivel castors, diameter 150 mm, 2 of which are lockable. Item 2.0 – Article 10776000 1 piece RU-MSTR assembly station for frame fitting parts Hedpfeytx Uljx Agksnn 3000 mm long, width 600 mm 1 shelf for fitting parts, 1 support table covered with felt Working height adjustable between 900 – 1100 mm (Without screwing units) Item 2.1 – Article 6747 1 piece track rail with carriage, 3000 mm long Item 2.2 – Article 6308 1 piece balancer for tools 3 to 5.5 kg Item 2.3 – Article 10778000 1 piece RU-STS-A inline screwdriver with automatic screw feeding system POWASERT, consisting of inline screwdriver and feeder unit ADS-MF4, complete with hose couplings, inline screwdriver ADS 2445 RD with torque shut-off. Set up for the screw guidance used by the customer. Suitable for the following screw sizes: Shank diameter: 2.4 - 4.0 mm Shank length: 10 - 35 mm Head diameter: 5 - 8 mm When ordering, information about the screws must be sent to the manufacturer’s plant. Item 3.0 – Article 10782000 1 piece RU-EW-2S storage cart double-sided Storage capacity max. 36 sash frames in L-shape, screwed, length 1200 mm, depth 800 mm, height 2200 mm, support bars covered with felt, 4 swivel castors, 2 of which with stopper Item 4.0 – Article 10766000 1 piece RU-DR-1 rotary table with driving device for frame assembly. Table with parking brake. Support platform with crossbars and a pull-out to each side, covered with felt. Base dimensions 1400 x 1400 mm, extendable to 2500 x 1400 mm, working height adjustable from 900 – 1100 mm Item 4.1 – Article 5360-01 1 piece fixed tool tray 1000 x 400 mm for RU-DR-1 Item 4.2 – Article 6354 1 piece triple-meter track rail for drive unit, rail 10 mm high Item 4.3 – Article 6454 1 piece drive unit with flanged guide wheels and parking brake Item 4.4 – Article 6788 1 piece corner screw fixture. 1 pair of pneumatically height-adjustable clamping units for fixing profiles at right angles. Item 5.0 – Article 10383000 1 piece RU-DK-T14/34 tilt-turn table with pneumatic tilting device. Work platform with 4 support bars, Base dimensions 1400 x 1500 mm, extended 3400 x 2300 mm. Support table covered with felt. Tilting table height adjustable from 900 – 950 mm. 2 folding and sliding mounting plates included. Tr...

Kondisi: baru, Manual hand unit Yes Y/N Automatic for frame Yes Y/N RUCHSER window manufacturing machines Manual setting of clips on timber-aluminum windows with feed. Pos. 1 RU-WAL-C, auxiliary trolley with boom Length 4000 mm, swivel range 120°, total height 2900 mm, storage bins, 1 drawer, counterweight 50 kg and 2 support feet, trolley length 850 mm, depth 700 mm, mobile on 4 swivel castors, 2 with locking device, 3 carriage units for hose package screwdrivers. Pos. 2 Holding device for L7355 - ADS-MF4 Automatic screw feeder mounted on RU-WAL-C at approx. 1800 mm. Pos. 3 RU-CS-ST-M, bar-type screwdriver ADS-2545A with Screw feed unit ADS-MF4 and Aluminum holder box to accept rotating or fixed holders. The feed channel is adapted to the aluminum holder. The screwdriver is manually guided and features automatic torque cut-off and manual blade advance. The clip or rotating holder is stored in a container/box and is manually fed in the correct orientation via a feed channel. Using compressed air, the holder is delivered to the correct screwing position. Alternatively, it is possible to screw in either clip or rotating holders of the same geometry. The box simultaneously functions as an upper stop plate. Via 2 stop positions, depth distances can be adjusted using indexing bolts. For more than 3 screw positions in depth, Hsdpfx Aeyrtymjgkjnn it is advisable to use a separate positioning stop set for sashes and frames. Depth dimensions must be specified when ordering. Pos. 4 Balancer for devices 3–5.5 kg You will find a brochure with description in the PDF document attached. Prices on request! (Technical data as per manufacturer's specifications – subject to change!)

Kondisi: baru, Complete assembly line consisting of: Item 1.0 / RU-CBM 4000 Work Table with an extended guide rail by 500mm for the additional installation of an aluminium bracket screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD, equipped with the RU-SH special screwdriver, support table. Length: 4000 mm, Width: 1400 mm, manual adjustment of the working platform inclination. Holder for hardware shears or hardware punch. Hnjdsd Ih Hujpfx Agksn 16 swiveling counter supports for suspending sashes, fully pneumatically foldable to allow unobstructed movement of sashes on the table surface. Equipment for measuring the hardware length on the sash to ensure consistent and variable/central gearbox positioning for already drilled sashes, color-based size detection of the fittings. RU-SH, special screwdriver with pneumatic depth control mounted on running carriage, safety control, pneumatic height adjustment, screw feeding device with automatic shut-off of the fill container (manual insertion for a second screw length at the special screwdriver available upon request). RA-8, 8-position turret stop mounted on running carriage for 8 screw positions. RA-4, 4-position turret stop for four different sash widths mounted on swivel table. Sash size scanning, pneumatically operated, scanning range up to 2500 mm with simultaneous clamping of the measurement device. PSF – Pneumatic clamping device for sashes. Working height adjustable from 900–1000 mm. Support table covered with felt. Guide rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic pivoting device for the work surface with foot valve. Item 1.2 / 0500000 Mounting bracket tailored to customer's punch/shear. For installation of a hardware punch or shear (third-party make) provided by the customer at the sash assembly table. Please specify manufacturer when ordering!!! Item 1.3 / 5597-7 Travelling device for RU-CBM on semi-circular rails. The running rollers are mounted left and right on the base frame of the table. Item 1.4 / 6354-6 3 double meters of semi-circular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 hardware storage, free-standing, Length: 3100 mm, Depth: 1250 mm, Height: 2200 mm, Frame at the front without supports, 40 compartments, arranged in one row of 10 each separated by dividing walls, and one continuous top shelf, Compartment dimensions: Width 280 mm, Height 150 mm. Item 2 RU-CSA-SMB Aluminium Bracket Screwdriving Machine with automatic screw feeding and manual feeding of aluminium brackets from a mobile box with pneumatic positioning device, screwdriver with depth stop and 4-position turret stop. Pneumatic adjustment in Y-direction against two 6-position turret stops. Supply container for manual feed of rotary brackets or clip holders in square format 18.5 x 18.5. The bracket is manually pushed into a channel in the box and positioned in front of the screwdriver tip via a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in Y-direction max. 120 mm. Item 3 RU-S48-A6-350 Column-Mounted Slewing Crane for chain hoist, with 6 m aluminium jib Version with free-standing column, light-running jib, and trolley for slewing and cat travel manual operation by pushing/pulling the load. Reach: 6 m Overall height: 4.461 m Underside of jib: 3.722 m (top edge 3.9 m) Slewing range max. 270° Steel construction painted to RAL 7035 The base plate is to be anchored on site to the factory floor with ...

Kondisi: baru, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15VWL1032, The machine comes with tooling for producing electrical connectors in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 The offer also includes original MSA drawings. The VWL 1200 is a vertical three-axis CNC machine for the placement of electrofusion fittings, designed for handling medium to large-sized fittings or pipes. The machine can typically produce fittings within an internal diameter range of 250 to 1400 mm (1400 mm SDR17). Optionally, a 2-axis CNC drilling unit is available for drilling fusion indicator holes during the wire laying cycle or for drilling terminal holes during the external profiling cycle. The VWL 1200 uses specialized fixtures that clamp onto an innovative element, which is an integral part of the coupling's structure; thus, each half of the coupling has a separate melting zone. The wire laying process starts at one terminal at the end of the coupling. The wire is laid at double the required pitch to the end of the fusion zone, after which the tool system rotates and then moves in the opposite direction between the first laid pitch up to the rest position at the second terminal. The process is completed in the second part of the coupling. Hnjdpsu Itk Rsfx Agkjn The VWL 1200 system is designed to enable loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine features a completely open top, allowing for easy overhead loading via a gantry system. Alternatively, parts can be loaded through the exceptionally wide operator door using appropriate gripping and handling equipment.

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Ruchser roller conveyor for windows with 90° rotary device, left/right, length 4400mm. Electrically driven accumulating rollers with 2 parallel, pneumatically tiltable sections adjustable from vertical to 7°; outer side up to 7° vertical, inner side. Sections are 1900 mm high with rubber roller strips. Between the rubber strips are stainless steel sheets recessed by 2 mm to serve as gliding surfaces with clip holders. Infeed and outfeed equipped with edge-protection rollers, up to 3000mm high, designed as rubber rollers. Infeed section: 2000 mm; outfeed section: 4000 mm with driven accumulating rollers. Control system and operator panel mounted on freely adjustable stand. Hnsdpfx Agslpcc Iokjn

Kondisi: sangat baik (bekas), Rangka perakitan dengan bantalan karet Merek: EDER + MÜLLER Dapat disesuaikan ketinggiannya: 800 - 950 mm Ukuran bidang kerja: 1800 - 2800 mm diagonal Berat sendiri: 60 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Hjdpfxezcqqqo Agkonn DE - 44143 Dortmund - Wambel / Jerman

Tahun pembuatan: 2005, Kondisi: baik (bekas), nomor mesin/kendaraan: 8382, Mesin las dua kepala untuk profil PVC Hnodpfxszdq Ttj Agken

Kondisi: bekas, Tahun pembuatan: 1991, panjang total: 1.520 mm, lebar total: 720 mm, daya: 30 kW (40,79 hp), Telah sepenuhnya direkondisi, dilumasi, dan siap beroperasi. Shredder hidrolik otomatis dengan dua poros ini dirancang untuk menghancurkan dan memisahkan serpihan logam, plastik, kayu, kabel listrik, dan berbagai material lainnya. Dikendalikan oleh PLC yang memantau sensor-sensor, mengelola rotasi poros, serta secara otomatis mengaktifkan fungsi mundur; jika terjadi beberapa penyumbatan dalam waktu singkat, mesin akan mati otomatis. Selain itu, unit akan otomatis mati setelah periode tertentu saat beroperasi tanpa beban. Sorotan Teknis: Daya: 30 kW Tekanan hidrolik maksimum: 250 bar Hedpfxowk Egws Agkjnn Torsi: 11.780 Nm 2 poros penghancur dengan pisau Penggerak hidrolik dengan transmisi roda gigi (Valmet BB 3150CC) Penyesuaian tekanan pisau otomatis (sistem pegas cakram)

Kondisi: bekas, gendron-ru28-100-2024-06 Hodpownhkmjfx Agksnn