Beli Brandt Kdf 660 bekas (93)

Kondisi: baik (bekas), 1 Podpfxjgy Da Se Abujpl

Kondisi: baik (bekas), Finishing unit, buffing unit, modular aggregate system, profiling aggregate, double-end tenoner, edge processing machine, following the scraper unit for edge processing machine - Finishing unit: from edge banding machine BRANDT KM 35 - Motor: ATB 0.25 kW - Speed: 2,820 rpm Ppodpfx Aogy T I Eebusl - Lateral adjustment: yes - Height adjustment: yes - Dimensions: 480/250/H490 mm - Weight: 29 kg

Kondisi: bekas, Edge bander, edge banding machine, edge banding unit, finishing unit, buffing unit, modular aggregate system, profiling aggregate, double-end tenoner, edge processing machine, sanding aggregate, edge banding aggregate -Aggregate: from edge banding machine BRANDT KM 35 -Motor: Groschopp Type PM1 72-35 - Motor 180 V / 54 W -Individual components: see photos Pjdpfxjgy T Nxo Abuopl -Dimensions: 425/270/H260 mm -Weight: 24 kg

Kondisi: baik (bekas), Transmisi, gearbox sudut, gearbox roda gigi lurus, gearbox reduksi, gearbox cacing, gearbox sudut untuk mesin pelapis tepi - Produsen: ZAE, gearbox sudut dengan sambungan kardan dari mesin pelapis tepi BRANDT KS 25 Tipe: W 88 - Rasio transmisi: i = 2 : 1 Ppodpfxegylrao Abuel - Dimensi: 260/100/H210 mm - Berat: 7,2 kg

Kondisi: baik (bekas), Profile scraping blade unit, profile scraping blade, flat scraping blade unit, finishing unit, modular aggregate system, formatting processing unit, double-end profiler, edge processing machine, scraper blade for edge processing machine -Manufacturer: Homag, profile scraper blade from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm Podpfxjgylq So Abuspl -Weight: 62 kg

Kondisi: bekas, Edge bander BRANDT highflex 1440 well equipped, PRE-MILLING cutters glue application pneumatic pre-cut guillotine pressure rollers final trimming saws top-bottom milling unit 2 x corner rounding units Ppedpfjv H D S Ssx Abujl profile scraper flat scraper polishing unit the machine is equipped with NC-controlled milling and a pneumatic package max workpiece height 60mm max edge thickness (coil) 3mm feed speed up to 14m/min machine in working order, can be inspected and tested before purchase

Kondisi: bekas, Tahun pembuatan: 1985, Edge thickness 0.4 - 12 mm Pedec Tmygspfx Abuepl Workpiece thickness 10 - 55 mm Workpiece length min. 160 mm Workpiece width min. 65 mm Feed rate 13 m/min Pneumatic connection 7 bar Total length 5220 mm Weight 1950 kg Heated glue pot with Quickmelt hot-melt adhesive granulate Glue roller rotation for synchronous and counter rotation Edge magazine for PVC roll goods and strip edging Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at the machine infeed All units are track-controlled – i.e., no workpiece-controlled limit switches required End trimming Milling combination: bevel milling/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with bevel cutter) with pneumatic adjustment Scraper – with pneumatic adjustment Buffing Central lubrication for chain track Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with error indication Infrared heating element CE compliant Note regarding used machines: • Technical data subject to change and prior sale. • Prices stated are ex works – loading included! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty or guarantee claims. Buyers are welcome to inspect machines at their current location. • Special agreements are only valid if made in writing. (Inquiries will only be answered if you provide your address and telephone number!)

Kondisi: baik (bekas), Tahun pembuatan: 1981, Radius/trimming router, edge milling machine, edge router, shaped part milling machine Psdpfx Abjb A Hfqsujpl For simultaneous top and bottom radius/trimming of projecting edge materials on straight edges as well as curved workpieces with internal and external radii -Built-in cutter: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tipe: OPTIMAT F 13 Tahun pembuatan: 2001 Kondisi: Diuji fungsinya, sangat baik, bekas - Ketebalan benda kerja: 16 hingga 55 mm - Lebar benda kerja minimal: 30 mm - Radius dalam minimal: 35 mm - Ketebalan tepi maksimal: 3 mm Pjdpfox Rrbzox Abuopl - 2 motor frais 0,4 kW - Koneksi ekstraksi: 80 mm

Kondisi: baik (bekas), Tahun pembuatan: 1991, Edgebanding machine, edge bander, edge banding machine - Workpiece thickness: 10-85 mm - Hot air blower: 6 kW for pre-coated edges - End trimming cutter Ppedpfx Ajb A Ninsbuol - Edge reel holder - Transport dimensions: 900/700/H1080 mm - Weight: 135 kg

Kondisi: baik (bekas), 1 Pjdex Hyzhopfx Abuepl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 3 mm, tinggi total: 3.140 mm, tinggi kerja: 1.000 mm, Untuk dijual: mesin edge banding lengkung Optimat KTD 820, kondisi sangat baik Spesifikasi teknis: • Tahun produksi: 2004 • Tinggi meja dengan suction cup: 1000 mm • Pompa vakum: 6 m³/jam • Ketebalan elemen: 16–40 mm Pedpfx Abex N S Ifeuepl • Lebar minimal elemen: 100 mm • Panjang minimal tepi: 250 mm • Tinggi tepian: 20–45 mm • Ketebalan edge: 0,4–3 mm • Kapasitas pot lem: sekitar 0,5 l • Suhu kerja: 140–220°C • Kecepatan feeding: dapat diatur • Tinggi mesin: 3140 mm • Tinggi transportasi: 2000 mm

Kondisi: sangat baik (bekas), Adhesive applicator Guillotine Crosscut saws Milling machine (or Router, depending on context) Pjdpfsttu Risx Abuepl Scraper Polishing machine

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Unit frais pra Stasiun lem untuk granulat Guillotine pneumatik pemotong awal Unit pemotong dengan dua gergaji Unit milling dengan mata profil Siklin profil Psdpfx Ajx I A Duobujpl Polisher Tahun produksi: 2009 Panjang mesin: 3,7 m

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Equipped with pre-melter unit for hot-melt adhesive granulate Adhesive reservoir located below the glue roller Application of glue to the workpiece via adhesive roller, both in co-rotating and counter-rotating mode Automatic edge magazine for roll material and fixed lengths Pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compressing upper and lower glue joints Centrally adjustable upper pressure Psdpfoxya Rtox Abuspl Central manual lubrication of chain track Control panel at machine infeed End trimming unit for front and rear edge overhang; highly precise linear guides 2 motors of 0.18 kW each Tilting range for straight and bevel trimming: 0–15 degrees Flush trimming unit top and bottom with vertical and horizontal tracing Tilting range 0–15 degrees with 2 milling motors with combination of straight/radius reversible knives Digital counters allow for quick and precise—i.e., repeatable—settings Two-point pneumatic adjustment of top and bottom milling motors Scraper unit for finishing, with horizontal and vertical tracing Extendable workpiece support up to 350 mm Integrated control system for contactless management of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short-term Stock location: Flörsheim

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, kecepatan rotasi (maks.): 10.960 rpm, Perlengkapan: Penandaan CE, de_en_001 Pedpexw Tugsfx Abujpl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 11 m/menit, ketebalan tepi (maks.): 3 mm, tinggi pelat: 60 mm, kecepatan rotasi (maks.): 12.000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 60 mm Ppodpjxw Tngofx Abuol Min. panel height: 8 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Number of working units: 5 Max. spindle speed: 12,000 rpm MACHINE DETAILS Unit: Sizing/format cut Unit: Trimming Automatic timed engagement: yes Motor power: 2.2 kW Pre-heating lamps for edge material Edge tape magazine Number of positions: 1 Gluing system Hotmelt gluepot Hotmelt pre-fuser Edge pressure roller track Number of pressure rollers: 3 With NC positioning Edge processing unit 1 Unit: End trimming Number of motors: 2 Max. processing speed: 11 m/min Motor power: 0.18 kW Max. speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling Number of motors: 2 With NC positioning Motor power: 0.55 kW Max. speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT EASY CONTROL EC 10+ control system CE marking

Kondisi: bekas, Tahun pembuatan: 1989, • Maximum workpiece thickness (mm): 55 • Minimum workpiece width (mm): 80 • Maximum profile depth (mm): 80 • Minimum inner radius (mm): 10 • Maximum edge material thickness (mm): 3 – depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm • Electrical connection: 220 V – 1 Ph. – 50 Hz • Connected load (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Buffing unit: for processing thick PVC edges • Weight (kg): approx. 120 Pedpfjk E Hrbsx Abuepl

Tahun pembuatan: 1988, Kondisi: bekas, • Maximum working length (mm): 3100 • Maximum profile height (mm): 200 Ppedpfxokx Hpas Abuel

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Features and technical data: - Equipped with a gluing unit for hot-melt adhesive granulate - Capable of processing PU adhesive granulate, in compliance with adhesive processing guidelines - Adhesive reservoir below the glue roller - Adhesive application to the workpiece via glue roller in both co-rotating and counter-rotating directions - With contact heating shoe for pre-heating the workpiece - Automatic edge magazine for coil material and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compress the upper and lower glue joints - Centrally adjustable upper pressure - Central manual chain track lubrication - Control panel at machine infeed - End trimming unit: - For trimming excess edging at front and rear; highly precise linear guide - 2 motors, each 0.18 kW - Swivel range for straight and chamfered cuts 0-15 degrees - Flush trimming unit: - Top and bottom with vertical and horizontal tracing - Swivel range 0-15 degrees with 2 milling motors with reversible cutting heads for straight/radius - Digital counters allow quick and precise, i.e., repeatable settings - Two-point pneumatic adjustment of upper and lower milling motors - Scraper unit for finishing with horizontal/vertical tracing Ppodpfx Ajwkbd Esbujl - Workpiece support extendable to 350 mm - Integrated feed control for contactless control of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8 – 50 mm - Edge thickness: 0.4 – 3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short notice Storage location: Röllbach

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0 - 251 - 20 - 4507, Karena perubahan aktivitas ke pengolahan kayu solid, mesin ini sangat sedikit digunakan dan dalam kondisi baik. Dapat dilihat di bengkel. Ppsdpfx Abexzp Uwouol

Kondisi: diremaj di bengkel (bekas), Mesin edging bekas rekondisi BRANDT AMBITION 1440 Pedpfx Abjw S E Rqeuspl

Kondisi: baik (bekas), BRANDT Highflex 1440 Edgebander Well-equipped, available for inspection before purchase. Pre-milling cutters Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom pre-milling unit 2 x multi-function milling units Profile scraper Flat scraper Polishing unit Ppodpfx Ajt Hxxpobujl The machine features NC control for the milling units and a pneumatic package. Max workpiece height: 60mm Max edge tape thickness (coil): 3mm Feed speed max: 14m/min Well-maintained machine, in very good condition.

Kondisi: baik (bekas), Tahun pembuatan: 2006, • Glue pot • Conversion: carried out by Hüttenhölscher GmbH in Verl • Application area: adhesive application unit for handle rails • Vacuum table: included • Automatic pressure zone: included Ppsdeibdyqspfx Abusl

Kondisi: bekas, Tahun pembuatan: 1988, with lateral cross-cut saw Ppjdpfx Aebaz E Asbuel