Beli Buffing bekas (240)

Kondisi: bekas, Tahun pembuatan: 2014, • motorisierte Druckbrückenverstellung • Elektrische Vorschubregelung, stufenlos, 400 V / 50 Hz, 2,2 kW • Steuerung PPC 221 – mit 8,4'' VGA Farbdisplay Hochleistungssteuerung mit sehr einfacher Bedienung • Kanten-Vorfräsaggregat 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 U/min) mit 2 Fräseinheiten für das Vorfräsen der Plattenkante • Fräser, Diamant Ø 70 x 64 x 30 mm, Z2, Linkslauf Für Vorfräsaggregat 1801 / 1802 • Fräser, Diamant Ø 70 x 64 x 30 mm, Z2, Rechtslauf Für Vorfräsaggregat 1801 / 1802 • Kantenmagazin 1903 SYNCHRO Automatischer Transport von Rollen- und Streifenmaterial Ijdpfx Ajx Huhcja Njht • Leimstation Glu Jet GJ301, automatisch (2,3 kW, 50 Hz) • Andruckstation 1913, pneumatisch erste Walze angetrieben, 2 zusätzliche Andruckrollen mit pneumatischer Einzelsteuerung • Kappstation 1918 (60 mm), pneumatisch (2 x 0,45 kW, 12.000 U/min), pneumatisch schwenkbar 0/10° • Multifunktionsfräsaggregat 1827, pneumatisch (2 x 0,65 kW, 200 Hz, 12.000 U/min) • Vertikale Abtastrollen, manuell Manuelle Einstellung der vertikalen Abtastrolle in 0,1 mm Schritten zum Überfräsen von Decküberständen, z.B. bei Kunststoffkanten • Fräser, Diamant Ø 56/60 mm, Z = 2, R = 2,0 mm, Linkslauf Vollwerkzeug, diamantbeschichtet mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Fräser, Diamant Ø 56/60 mm, Z = 2, R = 2,0 mm, Rechtslauf Vollwerkzeug, diamantbeschichtet mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Eckenkopieraggregat 1832 (1 x 0,35 kW, 200 Hz, 12.000 U/min), für Kantenstärken bis 3 mm • Fräser, Diamant Ø 53 x 10 x 16 mm, Z = 3, R = 2 mm, mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, für Profilaggregat 1832 • Ziehklingeneinheit 1929, pneumatisch einschließlich pneumatischer Verstellung (separat für oben und unten) • HW-Wendemesser für Ziehklingenhalter 1929 / 1927 R = 2,0 mm (2 Stück erforderlich) • Flachziehklingeneinheit 1964 Entfernen von Leimresten für saubere Leimfugen. • Poliereinheit 1940 (2 x 0,12 kW, 50 Hz, 1400 U/min) Zur Endreinigung und Kantenpolitur. Mit 2 Textilscheiben, Schwenkbereich 0–5°.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Edge bander HOLZHER, tipe 1310 dilengkapi dengan: stasiun lem patron, pemotong sirip rata, dua agregat multifreze, scraper profil, unit buffing, kondisi baik. Ihedpfx Ajx H Sutsa Nst

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with jointing unit, hot melt glue application for straight workpieces, flush trimming unit with VR function, HF trimming unit, chain feed, double roller upper pressure, and pull-out workpiece support rail. Suitable for ABS and PVC edgebanding rolls as well as fixed lengths from 0.4–2.0 mm and workpiece heights from 8–50 mm. Feed speed: 5.5 m/min • 2 free positions for finishing units • 5.6'' color touchscreen • Automatic edge feeding for roll material via swiveling roll plate D=600 mm • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge banding • Teflon-coated glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustment, electronic temperature control with automatic standby function (prevents burning of glue if the machine is on but not used for extended periods). (Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes.) • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and an adjustable spring-loaded pressure roller, for optimal bonding between the edge material and the workpiece, adjustable via SIKO indicator Ihedpfx Aaoip Uzpo Not • Flush trimming unit for the front and rear edge of the workpiece, incl. VR function (for vertical roundings), HF motor 0.27 kW / 12,000 rpm, automatic tracing on the workpiece, with extraction hood • High-frequency combination trimming station: 2 powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and bevel trimming, horizontal and vertical tracing of the workpiece, unit adjustment equipped with digital counters for setting various edge types, height adjustment of the upper unit with upper pressure • 5.6” color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics • LED interior lighting • Riepe spray systems for anti-adhesive or cleaning agents available as an option Optional finishing units (2 free positions): • Radius scraper unit: Lightly drawing cut to remove possible radius cutter marks for a perfect finish; fine adjustment via digital counter • Surface scraper unit: Lightly drawing cut removes glue residues from the workpiece surface at the glue joint • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm, ensure a super finish on ABS and PVC edge materials

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine Ihedpfxelht Hwo Aa Net With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Location: Ex-stock 54634 Bitburg - Available in calendar week 4 -

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue unit - Feed unit with automatic edge band magazine - Pressure area with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming cuts - Top/bottom routing: 2 milling units with tracing wheels for radius or bevel - Radius scraper: pneumatically controlled, for post-processing of radii - Surface scraper: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray system - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 Isdpfjxdpm Sex Aa Nsht - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connecting cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short-term Location: Bavaria

Tahun pembuatan: 1999, Kondisi: baik (bekas), IMA Compact MFA / F / 5212 Edge Banding Machine Year of manufacture: 1999 S/N: 06601 Max. edging thickness: 12 mm Min. workpiece thickness: 10 mm Max. thickness of roll material: 3 mm Feed speed: 12 m/min Adjustment of jointing fence: manual Heating-up time: 10 min Jointing unit: Yes, with 2 milling units Automatic roll magazine: Yes Guillotine shears up to: 0.2 - 3.0 mm Solid edge magazine: Yes Preheating of the panel by radiant heater automatic gluing with glue pot and granulate End trimming saw angle adjustment via program Multi-function unit Corner rounding unit/Corner copying with 2 motors Isdpeia Naqefx Aa Neht Profile scraper Flat scraper Buffing unit Aggregate display: mechanical number display Control type via control panel Operation: selector switch/pushbuttons Safety hood Approx. weight: 2500 kg Dimensions (L x W x H): 6500 x 1000 x 1600 mm CE marked Technical data subject to confirmation

Kondisi: bekas, Tahun pembuatan: 1989, • Maximum workpiece thickness (mm): 55 • Minimum workpiece width (mm): 80 • Maximum profile depth (mm): 80 • Minimum inner radius (mm): 10 • Maximum edge material thickness (mm): 3 – depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm • Electrical connection: 220 V – 1 Ph. – 50 Hz • Connected load (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Buffing unit: for processing thick PVC edges Ihedpfxok E Hrbe Aa Net • Weight (kg): approx. 120

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 20 m/menit, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 12 mm, Perlengkapan: Penandaan CE, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed rate: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Trimming Pre-heating lamps for edge material Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Edge pressure roller conveyor Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunction unit Model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.18 + 0.400 kW Rotations per minute: 12,000 rpm Edge scraper unit Model: 08.519 Glue scraper unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of working units: 8 Ihsdpfx Aexxaucsa Njt Gluing system: PUR Control system: WINDOWS EQUIPMENT Machine programming software: ICOS open TS CE marking

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, 67641340eaae2 Ihsdpfx Aaod R U Acs Net

Kondisi: baru, Tahun pembuatan: 2025, en-Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – Iodpfsi Am Ukox Aa Neht - Immediately available - This long-running Hebrock bestseller offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a step milling cutter and a multi-radius scraper blade, Hebrock sets new standards in perfect edge processing for a wide range of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8–60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1,750 kg Equipment: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change pre-equipment including glue drain device, HF double-motor trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable cutter (combined version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), buffing station, robust chain feed, ball-bearing-supported double roller upper pressure, aggregate inspection windows on machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge bonding up to 60 mm workpiece thickness 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separating agent spray unit 36/24/2 Cleaning agent spray unit 36/25 Edge protection spraying unit 36/27 Nesting (1x milling station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness and jointing cutting depth settings Location: in stock at 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with sanding unit for edges made of wood, veneer, PVC, melamine, ABS – suitable for furniture manufacturing, joinery, custom-made fittings, panels, kitchens, bathroom furniture, and various other products Technical specifications: Min./max. panel height: 8–60 mm Panel height for rounded edges (Rondamat): 10–45 mm Edge thickness: 0.4–8 mm Edge thickness on roll: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Holder with motorized vertical adjustment Panel support arm Sound-insulated safety enclosure Liquid infeed Configuration: Anti-adhesive agent application unit with two nozzles – two tanks for parting agent/liquid Pre-milling unit with two high-frequency motors – diamond tools H64 mm – diameter 100 mm, F 30, h 65 – copying set included VC 560 gluing unit for edge application on panels up to 60 mm – glue pot capacity 1.5 kg – exchangeable pot Cross-cut unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – two saws, 115 mm diameter – end copy guides Tilting trimming/beveling unit for excess top and bottom edge removal – 2 motors, 0.55 kW each – 12,000 rpm – tilt from 0° to 25° – two-position pneumatic set for quick changeover between thin and radius edge processing Corner rounding unit with two motors on prismatic guideways – suitable for rounding and trimming thin and thick edges – 2 motors, 0.55 kW each – 12,000 rpm Edge scraper unit for optimal finish of ABS/PVC edges, with rotary tracing guides, dust extraction hood, and chip collector Glue scraper unit – removes glue residues from the top and bottom panel surface Buffing unit for cleaning and polishing plastic edges – 0.25 kW motor – brush diameter 150 mm Compressed air: 7 bar Iodpfxsxnvr Aj Aa Njht Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg Service just completed New diamond pre-milling cutters New copying wheels...

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tinggi pelat: 50 mm, Dari pembubaran perusahaan Tipe IMA Compact 309 C Tahun pembuatan 1992 Untuk bahan gulungan dan list hingga ketebalan 9 mm - Pengeleman dengan lem hot melt butiran - Pemotongan ujung - Penggergajian - Milling rata Iedpfx Aaex Avcdo Neht - Pengikisan dan penghalusan Pembayaran tunai saat pengambilan. Penjualan pribadi – tanpa garansi.

Kondisi: bekas, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Single-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: Roll material 0.4 – 3 mm Solid wood strips up to 5 mm Workpiece thickness: 10 – 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying at 16, 18 & 19 mm thickness: feed speed 12 m/min Aggregate configuration: RIEPE separating agent application Joint trimming unit with 2 counter-rotating, actuation-controlled motors, equipped with diamond-tipped spiral cutterheads Option: diamond cutter tools, height 65 mm instead of 30 mm Automatic edge feeding with rotating roll table, diameter 800 mm, with automatic strip magazine, spike roller for solid wood strips Glue pot with automatic temperature control and standby function, glue roller temperature adjustable separately, capacity approx. 1.5 kg Option: glue run-out function, Teflon-coated drip tray, adapted software for EVA/PU glue Option: quick-change system for glue pot Pressure zone with 1 driven main pressure roller and 2 free-running follow-up rollers End trimming unit with 2 HF motors, 0.55 kW Pneumatically tiltable 0 – 10 degrees, controlled from the operator panel Combination milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal and vertical tracing, motorized positioning via control system Option: nesting package for combi-milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges with up to 2 mm edge thickness (Not recommended for soft & postformed profiles) With 2 motors, 0.27 kW Two L-Motion motors each for positioning the horizontal tracing shoes as well as the tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Option: nesting package for radius scraper Flat scraper unit with pneumatic in/out control via the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW Control system: 18.5-inch graphic touchscreen with L-Motion software Option: floating contact for connection to a return conveyor system Total machine length: 4,890 mm Ijdpfx Asxugplea Njht The machine is being replaced due to insufficient capacity. The return conveyor system shown in the photos is not included in the scope of delivery.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 40 m/menit, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 3 mm, lebar benda kerja (maks.): 3.000 mm, kecepatan rotasi (maks.): 6.000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format cutting unit Unit: double top and bottom pre-milling Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Ihedpfx Aasxxal Io Not Magazine for coil No. of positions: 12 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Edge pressure roller track Edge Processing Unit 1 Unit: end trimming No. of motors: 2 Edge Processing Unit 2 Unit: top trimming No. of motors: 2 Edge Processing Unit 3 Unit: edge trimming No. of motors: 2 Edge Processing Unit 4 Unit: edge trimming No. of motors: 2 Edge Processing Unit 5 Unit: top trimming No. of motors: 2 automatic engagement by timer Edge Processing Unit 6 Unit: edge scraper Edge Processing Unit 7 Unit: glue scraper Edge Processing Unit 8 Unit: buffing station No. of motors: 2 EQUIPMENT PUR gluing system

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, One-sided automatic edge banding machine with jointing unit, hot-melt adhesive application on straight workpieces (EVA-PUR glue pot with drain function optional), HF end trimming station, HF routing unit, corner rounding unit, chain feed, double roller upper pressure, extendable workpiece support rail, and signal lamp for workpiece sequence. Suitable for ABS, PVC, melamine, and solid wood veneer edge rolls, as well as fixed lengths from 0.4 – 3.0 mm thick and workpiece heights from 8 – 50 mm. Feed speed: 7.0 m/min • 2 free spaces for finishing units • 10.0” color touchscreen. • Automatic edge feeding for roll material via rotatable roll holder D=600 mm • Infeed fence (400 mm) with support • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean, tear-free jointing of workpieces before edge banding • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the glue pot), fine adjustable glue application by glue roller, separate glue roller temperature setting, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but left switched on). Optional: EVA/PUR glue pot with drain/cleaning function for rapid color change • Pre-cutting shear for roll material up to 3 mm edge thickness • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable spring-loaded pressure roller, ensuring good joint quality between the edge material and workpiece; mechanical SIKO indicator for pressure zone adjustment • High-frequency end trim saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean, precise cut, equipped with extraction hood • High-frequency combination routing station, 2 powerful 0.27 kW HF motors with HM-WPL special cutters, suitable for radius and bevel trimming, horizontal and vertical scanning of the workpiece, unit adjustment with digital counters for different edge types, 2 chip extraction hoods with central extraction connectors 2 x Ø 100 mm, height adjustment for the upper unit via upper pressure adjustment • Corner rounding unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, can be activated from the control panel. Optionally single-sided (front or rear edge) or double-sided corner rounding Iedod R U Adopfx Aa Neht • Rotatable control panel with 10.0” color touchscreen controls glue temperature settings, automatic temperature reduction when not in use, on/off control for units, and error diagnostics • LED lighting inside the cabin • Riepe spray systems for anti-adhesive or cleaning agent available as options Optional finishing units (2 slots available): • Radius scraper unit – Light scraping cut removes possible marks from radius cutters for a perfect finish. Fine adjustment via digital counter. • Flat scraper unit – Gently scrapes glue residue from the workpiece surface at the glue joint • Buffing unit – 2 motors 0.05 kW, 1.50

Kondisi: baik (bekas), Tahun pembuatan: 2007, lebar kerja: 800 mm, Mesin Poles Merek: Gottschild Tipe: HBS Tahun Pembuatan: 2007 Mesin poles high-gloss, sebelumnya digunakan untuk memoles permukaan dapur dan komponen furnitur kamar mandi. Lebar kerja: 800 mm 1 kepala polishing otomatis bergerak ke kanan dan kiri Motor polishing: 0,7/0,9 kW Area kerja dideteksi oleh sensor Lebar sabuk transportasi 820 mm x panjang 1950 mm Sabuk transportasi bergerak maju dan mundur Masing-masing satu roller conveyor di depan dan belakang sabuk: lebar 820 mm x panjang 1500 mm Daya terpasang: 2,2 kW / 400 V / 50 Hz Koneksi udara tekan: 6 bar Ijdpfsxzqrqsx Aa Nsht

Kondisi: baik (bekas), Tahun pembuatan: 2016, jam operasional: 16.977 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 140 mm, panjang umpan sumbu Y: 50 mm, kecepatan pemakanan sumbu X: 18 m/menit, ketebalan tepi (maks.): 3 mm, panjang total: 6.000 mm, tinggi benda kerja (maks.): 60 mm, berat keseluruhan: 3.000 kg, SCM OLIMPIC K 800 - T-ERL Kantenanleimmaschine (mit Vormfräs- und Eckenrundungsaggregat): Technische Daten: - Kantenstärke: 0,4 bis 8 mm (0,016 bis 5/16"), geeignet für Streifen- und Rollenmaterial. - Plattenmaß: Mindestbreite 50 mm, Mindestlänge 140 mm (2-3/8" und 5-1/2"). Plattendicke min./max.: 8–60 mm (3/8"–2-3/8"). Ausstattung: - Einstellbarer Einlaufführungsanschlag: Manuell einstellbar mit Digitalanzeige und pneumatischer Plattenvereinzelung. - Vormfräsaggregat RT-E: 2 Spindeln à 3,0 PS, 12.000 U/min, eine mit PLC-gesteuerter Sprungfunktion und manueller Digitalpositionsanzeige. - Automatisches Anleimermagazin für Streifen und Rollenmaterial: Mit 3 mm Guillotine für Rollenware. - Leimauftragseinheit: Für EVA-Schmelzklebstoff, beschichteter Leimbehälter (Teflon), schneller Behälterwechsel, Aufheizzeit ca. 10 Min. - Druckzone: Servomotorische Einstellung, 4 Andruckrollen (erste größer, Teflon-beschichtet und angetrieben). Bearbeitungsaggregate: - Kappstation K-SEL: Vorne und hinten, 2 x 0,5 PS, 12.000 U/min, auf THK-Führungen montiert, drehbar 0–15°, schneller Wechsel zwischen Gerade- und Winkelschnitt durch automatische Schwenkeinheit. - Bündigfräsaggregat: Oben/unten, 2 x 1,0 PS, 12.000 U/min, 2 pneumatisch vorgewählte Positionen (bündig/überstehend), pneumatische Fernverstellung. Iedpfx Aaexxy Rko Neht - Phasen-/Radiusfräsaggregat: Programmierbar, servomotorische Einstellung, 2 x 1,0 PS, 12.000 U/min für den Wechsel im laufenden Betrieb. - Eckenrundungs-/Fräsaggregat: Für zusätzliches Beschneiden oben/unten von linearen und/oder vertikalen Ecken beim Anleimen aller 4 Seiten, 2 x 0,8 PS, 12.000 U/min. - Profilziehklingenaggregat "RAS/1000": Oben/unten, 2 manuell vorwählbare Positionen, große Kopierräder für höchste Genauigkeit, pneumatische Verstellung. - Leimfugenschabeinheit "RC-V": Oben/unten, flacher Leimabzieher, über Steuerung pneumatisch verstellbar mit Luftdüse zur Messerreinigung. - Polieraggregat "SPN": Oben/unten, oszillierend, 2 x 0,25 PS, 3.000 U/min, Schwenkbereich bis 12°. - Warmlufteinheit: Ein Gebläse, stufenlose Temperatureinstellung, Richtschutz für optimale Abdeckung oben/unten. Stellt Glanzverlust bei starken PVC-Kanten nach dem Abziehen wieder her. Bedienoberfläche: - Startouch-Steuerung: 12" Farb-Touchscreen, 270° schwenkbar an der Maschineneinlaufseite. Speicherung von bis zu 100 Programmen (6 direkt abrufbar), grafische Darstellung aller Aggregate. Produktionsdatenerfassung, Diagnose, Wartungstracker. Weitere Merkmale: - Vorschub 11/16 m/min (36/52 FPM), 1 x 2,5 PS Vorschubmotor, alle Fräsaggregate mit 200 Hz Frequenzumrichter. - Elektronisch programmierbare Andruckbalkenverstellung, beleuchtete Schallschutzhaube, ausfahrbare Plattenauflage. - Aktuelles Modell: OLIMPIC K 800 T-FR2. Inklusive: - 2 Leimbecken + 1 Leimbecken für Ersatzteile.

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machine for gluing and processing straight panel edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, knife-cut veneers, etc.) • NC control with touchscreen display • Automatic start of unit motors. • Direct selection for second pass. • Production data acquisition. • Software-guided maintenance. Iedpsxzb Iisfx Aa Njht TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU unit (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material) (*): 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air: 7 bar Glue pot capacity: approx. 2 kg * Depending on selected units. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge material to the workpiece, automatically cuts the edge from the coil, and presses it onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming front and rear edge projections at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made from synthetic materials up to max. 3 mm thickness. PRE-MILLING UNIT RT02 Prepares the workpiece prior to glue application. Equipped with two 1.8 kW high-frequency motors running at 12,000 rpm. SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. GLUE JOINT SCRAPER RC02 Unit for removing excess adhesive in the transition area between the edge and the panel. Equipped with tracing rollers and a flat knife with insertion control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using cloth polishing wheels. The unit automatically adjusts to the workpiece thickness. ANTI-ADHESIVE SPRAY SYSTEM ADZ02 Precision application of anti-adhesive via injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing via: - controlled monitoring of the glue roller - automatic retraction at feed stop - automatic ON/OFF of the gluing unit REVERSE system for switching the glue roller between forward and reverse operation. Electrical and mechanical preparation for use of special glue pots for POLYURETHANE adhesive in machines configured for EVA glue. NC axis for the fine trimming unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface. Pair of multi-profile cutters for fine trimming unit: 25-degree chamfer cutter, R=2 mm + R=1 mm, and straight profile for solid wood. NC axis for the profile milling unit Kit for automatic setting of the sensor according to edge thickness. Adjustment is controlled via the operator interface. Function for corner-only processing NC axis for the scraper unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M/53056, panjang total: 9.800 mm, berat keseluruhan: 4.500 kg, sambungan udara terkompresi: 6 batang, tegangan masuk: 400 V, frekuensi input: 50 Hz, Single-sided edge banding machine in right-hand configuration - with jointing unit - gluing unit - double end trimming unit - flush, chamfer, and radius milling unit - corner rounding unit - scraper blade and edge cleaning unit with high-performance automation - pressure zone with one powered roller and six follow-up pressure rollers - automatic edge thickness adjustment for all units - automated chamfer thickness setting for the top pressure according to panel thickness - pneumatic infeed and outfeed of all processing units with monitoring - machine in CE-compliant design with full enclosure of processing zones by high-quality noise protection hoods. Machine length: 9,800 mm Machine weight: 4,500 kg Gluing unit - for hot-melt adhesive granules - with quick heating tank, heating time: 6 minutes - electronic temperature regulation - adhesive application roller (no adjustment for different material heights required) - operates in both co-direction and counter-direction, automatic activation via program control Edge banding thickness: 0.2 – 20 mm Workpiece dimensions: Minimum width: 60 mm Minimum height: 8 mm Maximum height: 60 mm Minimum length: 160 mm for strip edges / 60 mm for endless edges from the roll / 150 mm with double end trimming unit Workpiece transport - robust chain conveyor with precise glide guides for the chain support plates with flat and round guides for positive workpiece transport - feed speed: 12 – 20 mm/min, via electronic inverter with pre-selection on the central control panel, values can be saved in work programs - motor power: 5.5 kW Panel thickness adjustment motorized adjustment of the double roller top pressure, pre-selection on the central control panel, values can be saved in work programs Edge thickness adjustment - automatic positioning of all units that need to be set for edge thickness, including pressure zone, pre-selection via the central control panel, values can be saved in work programs Machine control - central control panel - PLC and section control for contactless control of processing units Central control panel - for flexible and easy operation of the edge banding machine, with specifically designed user interface for clear and fast access to all important machine and unit statuses - clear menu navigation via two-line text display, supported by well-arranged symbols with two-color LED status indicators PLC Ihjdpfx Aoxy Sizsa Njt - high-performance industrial-standard PLC for fast and efficient communication with the machine and for control of all functional groups and section control Section control - high-resolution section control for all processing units with +/- 1 mm accuracy over the full machine length - full access via the control panel for all process-controlled machining units - values can be stored in different work programs EFU - electronic frequency inverter Connections Electric: 3 x 400 V, 50 Hz, rated current 42 A, fuse: 50 amperes, supply cable: 5-core, 5 x 10 mm², control voltage: 24 V Extraction: 1 x 120 mm, 1 x 160 mm, 1 x 120 mm, exhaust air speed: at least 20 m/sec, required capacity: approx. 65 m³/min Compressed air: 6 bar, 1/4" – consumption approx. 300 l/min., required minimum pressure: 4.5 bar, all workpiece blow-off units section-controlled

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 11 m/menit, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 6 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: Penandaan CE, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Minimum panel height: 8 mm Maximum panel height: 40 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Sizing unit: Unit: Precut/format trimming Unit: Corrections Automatic intervention by time control Motor power: 2.2 kW Edge preheating lamps Coil magazine Number of positions: 1 Gluing system Glue pot for hotmelt adhesive Edge pressure roller track Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic intervention by time control Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming router Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Ihedpfx Aaoxw Ttvj Net Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing brush Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT PC 16 control system CE marking

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Iodpfx Ajv Sv Ensa Njht Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: baru, Tahun pembuatan: 2025, Pre-milling unit: yes Pre-milling depth: 0 - 2 mm Plastic edging thickness: 0.4 - 3 mm Solid wood edging thickness: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Ihodpfxsl D Rx Us Aa Not Anti-adhesive spray unit: yes Edge pre-heating device: yes Glue unit: granulate / quick-change glue pot kit End trimming unit: yes Flush end trimming unit: yes Corner copying unit: yes Flush/radius trimming unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3,774 mm Machine width: 1,546 mm Machine height: 1,337 mm Weight: 842 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Single-sided laser and PU edge banding machine incl. workpiece return conveyor Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return conveyor type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting unit - Feed speed 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed speed: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units & Gluing: Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutters Automatic vertical adjustment for jointing cutters Ihedsxgrfpepfx Aa Net Lasertec activation unit Performance Basic gluing unit A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll table Infinitely adjustable edge presser Vacuum unit for single strip feeding Servo edge feeder Edge thickness measurement for roll material Quick-release system for application unit QA/PU Interchangeable PU65 application unit Automatic glue quantity dosing Balti melting unit Automatic adjustment of pressure zone Moistening device for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 chamfer/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment of end trimming stop Premilling unit BF20 Pneumatic adjustment for premilling unit Multirouting unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of: Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment for FA11 Additional equipment: Edgebanding of solid wood edging Automatic adjustment of infeed fence left side Infeed extension 500 mm Sliding carriage Workpiece support, scissor design Scissor design extension Workpiece thickness 8mm instead of 12mm Potential-free contact Flexible edge sequence control software Gap setup Workpiece return conveyor ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters: Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed speed: 8 – 30 m/min

Kondisi: baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 020313L, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 3 mm, tekanan: 7 batang, Description: Robust steel construction ensures high machine stability. Workpiece feed is accomplished via a sliding conveyor chain fitted with plastic plates. The top pressure unit is equipped with two rows of rubber-coated rollers. Manual adjustment of the top pressure, with automatic positioning of the processing units according to changes in workpiece thickness. Mechanical digital display for panel thickness. PLC for motor and glue pot on/off control. Glue pot with stand-by function for temperature maintenance. Start/stop function for all motors. End trimming unit suitable for edge material up to 3mm. Support tray for edgebanding coil diameters up to 800 mm. Central extraction connector. Roller track as a workpiece support along the entire machine length. Safety cover over all processing units. Operator panel including emergency stop and lockable main switch. Transformer for 24V control circuit. Jointing Trimmer Unit before the gluing section for preparing the workpiece edge for glue application. With adjustable fence at feed-in. Maximum material removal 2 mm. Two motors, each 1.1 kW, 12,000 rpm, max. material removal 2 mm, extraction port diameter 120 mm. Includes 2 TCT (WIDIA) cutter heads. Gluing Section for hot-melt adhesive with rapid heat-up and glue application roller. Features temperature control system and excess hot-melt glue recirculation. Power requirement 3.5 kW, capacity 1.5 kg. Heat-up time: approx. 15 min, depending on ambient temperature and adhesive. End Trimming Unit with 1 saw blade for trimming the front and rear edge overhang at a 90° angle, flush with the workpiece. Front and rear trimming can be controlled separately as required. Motor: 0.35 kW Saw blade speed: 12,000 rpm. Flush Milling Unit with two motors for milling a radius or chamfer, top, bottom, and/or on the front edge. Vertical and horizontal motor adjustment on hardened steel linear guides and ball bearings. Three manually adjustable positions for different edge thicknesses. Motors are not tiltable. Complete unit with TCT (WIDIA) 2/3 mm cutter heads. 2 motors, each 0.55 kW, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile Scraper Flat Scraper Ijdexn Hzbopfx Aa Nsht Buffing Unit Form Milling Unit: With 0.22 kW, 12,000 rpm, prismatic linear guide. Max. panel thickness 50 mm. Max. edge material thickness 2 mm. Technical Data: Edge strip size (manual feed) max.: 5 x 45 mm Pre-milled panel thickness: 10 - 40 mm Non-milled panel thickness: 10 - 60 mm Max. melamine edge height: 65 mm Max. ABS edge height: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with coil material: 90 mm Minimum workpiece length with coil material: 160 mm Glue temperature: 190°–210°C Feed speed: 8 m/min Frequency inverter: 200 Hz Compressed air: 7 bar Extraction port diameter: 2 x 60 mm CE standard

Kondisi: bekas, Technical details: Iodpfsu Ng Rtex Aa Nsht Disc diameter: 780 mm Table height above floor: 800 mm Table size: 890 x 190 mm Grinding table: adjustable tilt, degrees Total power requirement: approx. 2.0 kW Approx. machine weight: 0.2 t Required floor space approx.: L: 1.2 x W: 1.05 x H: 1.3 m DOUBLE-DISC GRINDING MACHINE - Mounted on a cast machine base as a complete unit. - Fields of application: Metal; Wood; Plastics - Abrasive disc diameter: 680 mm - Abrasive material: sandpaper - Extraction port: 80 x 120 mm