Beli Buffing bekas (284)

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 Working width (min/max) mm: 225 - 3,000 Control/Software: Power Control PC 22 – Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam spacing (mm): 400 SIZING (for each side): - Protective cutter (pre-milling): 1 x 4.5 kW - Chipping cutter KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): - Gluing unit (hot-melt glue + premelter): A3 + SERVO - Edge pressure zone “A” - Edge magazine for rolls (magazine slot no. 2) - End trimming unit HL 84 (2 x 0.22 kW) - Pre-milling unit (2 x 0.55 kW) - Milling unit 2 x 0.4 kW - Profile milling unit (copy) FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling units (electropneumatic control) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electropneumatic control) UF 11 (4 kW x 1) 0°-90° Itsdpsp N D Ngofx Aa Njb Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + polishing unit) FA 11

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a processing line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Ijdpfx Aajhvi E Ij Nstb Safety and soundproofing cabin Cam spacing (mm): 500 Panel processing (per side): Spray unit (for liquid non-stick agent) Pre-milling unit: 1 x 4.5 kW Chipper KD 11 (2 x 6.6 kW) LEFT SIDE: Universal milling unit (electropneumatically controlled), SF 20 (1 x 6.6 kW), 0°-90° RIGHT SIDE: Free position / slot EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot no. 6). Edge pressure zone "A" (1 + 4 rollers) End trimming unit HL 04 (2 x 0.18 kW) Pre-milling unit OPTIMAT (2 x 0.55 kW) Multi-function unit (radius and profile milling) FK 11 - 2 x 0.4 kW Multi-profile scraper unit PN 20 Flat scraper unit (pneumatic) Buffing unit (2 x 0.25 kW)

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING MACHINE - Edge thickness (roll) (min/max): 0.3 - 3 mm - Workpiece thickness (panel) min./max.: 12-40 mm - Working width (min./max.): 250-2500 mm - PC control: PC22 - Top pressure system with driven rubber belts - Adjustable feed fence: 10-32 m/min - Liquid glue unit - Jointing milling unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt adhesive unit A3 - Pressure zone C (manual adjustment) "A" - Roll holder for 2 rolls - End trimming unit: HL 84 (2x 0.22 kW at 12000 rpm) - Pre-milling unit (2x 0.4 kW at 12000 rpm) Iedpfjwk Hp Tsx Aa Notb - Finishing unit (scraper blade unit + buffing unit): FA11 - Polishing unit

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Itjdsu Rc Anepfx Aa Neb 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): Itjdpfx Aaou Rc Hye Neb 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable alignment stops, spacing (mm): 1000 Ijdpfxouhv R De Aa Nstb EDGE PROCESSING (for each side): Protective cutter (pre-milling) (1 x kW 4.5) Chip breaker KD 11 (2 x kW 6.6) Jointing milling unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (for each side): Gluing unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Edge magazine for rolls (slot No. 2) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spraying unit (for polishing liquid) No. 2 Universal milling units for grooving/rabbetting and profiling SF20 (2 x kW 6.6) Powered panel infeed roller conveyor with singulation system "HOMAG" Mod. POWER TBL 100/20/25

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Ijdpokt Uuasfx Aa Netb Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Itjdpfx Aasi Hn Sro Neb Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 8 – 60 Control ICOS open compact Feed speed m/min (adjustable) 6 – 30 Top pressure: driven by V-belt, spray unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable fence rule CNC-controlled. Panel infeed system Barcode reader Jointing cutter unit with CNC control 08.379 (2 x 4.0 kW) Heater for workpiece edge warming Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge pressure zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (slot no.) 12 Itjdpfxsltmnlo Aa Neb End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free space Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 3 / 12 Panel thickness (min/max) mm 8 / 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Pressure beam: driven by V-belt Spraying unit (for liquid anti-adhesive) Adjustable guide fence, CNC controlled Joint milling unit 08.379 (2 x 4.0 kW) Gluing unit (hot melt adhesive & PUR glue) 283.1513 Edge pressure zone (CNC-controlled) Edge magazine for rolls (compartment No.): 1 End trimming unit 08.415 (2 x 0.66 kW) Pre-milling unit 08.055 (2 x 1.0 kW) Iodod Nt N Hepfx Aa Njtb Copy shaping unit (profile copy) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile scraper unit 08.519 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving, rebating, and profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed table 65.152 (mm 500 x 500) Return conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 8 - 60 Itedjifnzdspfx Aa Nob Control: ICOS open Feed rate m/min (adjustable): 7-35 Top pressure: V-belt driven, spray unit (for liquid non-stick agent) Adjustable fence: CNC controlled. Panel feeding system A2 / 30 Jointing unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments no.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 80 Edge thickness in strips (min/max) mm 0.4 / 20 Control unit NC21 Feed speed m/min 18 Top pressure powered by V-belt drive Adjustable fence, CNC controlled Jointing milling unit 2 x 3 kW Gluing unit (Hot Melt + Pre-melter) A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) Iodpfx Aael Iz Tuj Netb End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment for bevel/straight Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profile scraper unit Finishing unit (flat scrapers + polishing unit) FA 10

Kondisi: bekas, Tahun pembuatan: 2020, Mesin bekas Tahun pembuatan: 2020 Perlengkapan: - Pengendalian unit melalui layar sentuh - Unit milling sambungan - Wadah lem - Unit pemotong - Unit milling radius - Unit pisau penarik radius - Unit pisau penarik permukaan - Unit pemoles - Penyemprotan depan dan belakang Isdpfex Enquex Aa Notb Lokasi: Rheinland-Pfalz Ketersediaan: Sesuai kesepakatan Penjualan atas nama pelanggan. Informasi tanpa jaminan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Badania dodatkowe Isdpfxsx D N T Eo Aa Nstb Jednostka do obróbki łączenia Jednostka klejąca Jednostka przycinająca Jednostka wstępnego frezowania Jednostka do profilowania i obróbki Noże strugające profilowe Noże strugające powierzchniowe Jednostka polerująca Jednostka rowkująca Ta okleiniarka BRANDT KDF 890 2CU została wyprodukowana w 2011 roku. Wyposażona jest w jednostkę do obróbki łączenia, jednostkę klejącą, jednostkę przycinającą, jednostkę wstępnego frezowania, jednostkę do profilowania i obróbki, noże strugające profilowe, noże strugające powierzchniowe, jednostkę polerującą oraz jednostkę rowkującą. Rozważ zakup tej okleiniarki BRANDT KDF 890 2CU. Skontaktuj się z nami, aby uzyskać więcej informacji. Zastosowanie Okleinowanie krawędzi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Diese Kantenbearbeitungslinie wurde 1996 gefertigt. Sie verfügt über eine robuste, doppelseitig arbeitende Kantenbearbeitungsstraße einschließlich einer Leimeinheit mit Granulat-Vorschmelzer sowie einem 6-fach Rollenmagazin für Kantenmaterial. Ausgestattet mit Bündig- und Feinfräseinrichtungen, einem Formschaber sowie einer Poliereinheit. Die IMA COMBIMA ist ideal für die Längs- und Querbearbeitung und bietet umfassende Funktionalität für anspruchsvolle Arbeiten in der Holzbearbeitung. Für weitere Informationen zu dieser Holzbearbeitungsmaschine kontaktieren Sie uns bitte. Itsdpfx Aox D R U Dsa Nob Anwendungsbereiche: Kantenanleimen

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2128, kecepatan pemakanan sumbu X: 18 m/menit, tinggi benda kerja (maks.): 65 mm, ketebalan tepi (maks.): 15 mm, masa garansi: 12 bulan, HOLZ-HER_Kantenanleimmaschine_SPRINT_1329_multi_Baujahr_2025_Lie ferung_ab_Werk Itjdex Nqn Ropfx Aa Nob

Kondisi: bekas, jarak tempuh: 1 km, daya: 1 kW (1,36 hp), pendaftaran pertama: 08/2007, jenis bahan bakar: diesel, konfigurasi gandar: 2 gandar, warna: biru, volume ruang muat: 9 m³, Perlengkapan: ABS,

Kondisi: bekas, konfigurasi gandar: 2 gandar, pendaftaran pertama: 08/2007, volume ruang muat: 9 m³, Perlengkapan: ABS,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06686, panjang total: 8.700 mm, Mesin Edge Banding IMA Advantage 7200 – PU – dilengkapi lengkap Data teknis: • Tahun produksi: 2001 • Kontrol: IMA IMATRONIC 121 • Ketebalan maksimal edging: 20 mm • Ketebalan maksimal panel: 50 mm • Panjang minimal elemen: 150 mm • Lebar minimal elemen: 65 mm • Kecepatan pengumpanan: hingga 20 m/menit • Pengumpanan stepless Itjdex Igwlspfx Aa Nob • Penyesuaian ketinggian elektrik • Penekan atas dengan sabuk Perlengkapan / unit: • Perencana pra-milling • Lampu pemanas • Pelebur PU • Sistem aplikasi lem – panci yang dapat diganti • Gergaji pemotong ujung • Milling edging • Unit pembulatan sudut • Unit pengamplasan • Sikat profil • Sikat datar • Unit pemoles • Stasiun penghalusan Dimensi: • Panjang mesin: 8700 mm Kondisi: Mesin lengkap, berfungsi, siap digunakan. Dapat dinyalakan dan diuji.

Kondisi: bekas, Tahun pembuatan: 2008, IDM Level HD is an industrial single-sided edgebanding center designed for edge processing in standard furniture manufacturing. The HD model belongs to the category of machines with a robust construction and is suitable where stable edge quality is required at higher feed speeds. This machine allows complete processing of a workpiece in a single pass operation – from pre-milling, glue application, to final edge finishing. Thanks to its modular arrangement of working units, the machine can process ABS/PVC edges as well as veneer. The machine is used, fully cleaned, inspected, and ready for installation. Machine equipment Pre-milling unit – 2 counter-rotating motors, preparing the panel edge before edging Itjdjxztmdspfx Aa Neb Gluing unit – EVA glue pot, electronic temperature control Pressure zone – main pressure roller plus subsequent pressure rollers End trimming saws – 2 motors, clean cutting of edge ends Top and bottom milling unit – copying, precise finishing of ABS/PVC edges Front corner rounding unit – radius machining of panel corners Rear corner rounding unit – finishing corners at the panel outfeed Radius scrapers – final smoothing of the edge radius Flat scrapers – final finishing of the edge surface Polishing unit – 2 discs for final edge polishing Complete extraction system – connection of all working units Pneumatic pressures and adjustments – workpiece stability and precise regulation Manual fine adjustment – readout dials and micrometric controls for precise settings

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 80 mm, ketebalan tepi (maks.): 15 mm, daya unit penggilingan: 3.000 W, berat keseluruhan: 7.000 kg, sambungan udara terkompresi: 6 batang, jenis penyesuaian ketinggian: listrik, persyaratan ruang panjang: 10.500 mm, tahun perombakan terakhir: 2023, Topedge Duo-melt yang sepenuhnya direkondisi, tahun 2014 2 x motor pramilling masing-masing 3 kW Ketebalan panel 80 mm 1 x sistem sabuk penggerak atas Synchroflex 2 x kepala lem dan tangki, sistem Duo Melt (untuk pergantian warna lem seketika) 1 x stasiun trimming kasar 1 x bevel fine trim (juga dapat digunakan untuk finishing halus kayu pada pengaturan "datar" - sudut dapat disesuaikan) 1 x mesin trimming radius 1 x stasiun AKF 1 x AZK4 scraper radius 4 posisi per sisi 1 x scraper datar 1 x semprotan pembersih depan, tengah, dan belakang - LCM 1 x stasiun pemoles 2 x ruang kosong Pelurusan pagar masuk untuk panel sempit Paket nesting Iodpfjx Nbprex Aa Njtb Sistem pembersih LCM iRelease BrushTec ES - tidak termasuk

Kondisi: bekas, Tahun pembuatan: 2014, • motorisierte Druckbrückenverstellung • Elektrische Vorschubregelung, stufenlos, 400 V / 50 Hz, 2,2 kW • Steuerung PPC 221 – mit 8,4'' VGA Farbdisplay Hochleistungssteuerung mit sehr einfacher Bedienung • Kanten-Vorfräsaggregat 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 U/min) mit 2 Fräseinheiten für das Vorfräsen der Plattenkante • Fräser, Diamant Ø 70 x 64 x 30 mm, Z2, Linkslauf Für Vorfräsaggregat 1801 / 1802 • Fräser, Diamant Ø 70 x 64 x 30 mm, Z2, Rechtslauf Für Vorfräsaggregat 1801 / 1802 • Kantenmagazin 1903 SYNCHRO Automatischer Transport von Rollen- und Streifenmaterial • Leimstation Glu Jet GJ301, automatisch (2,3 kW, 50 Hz) • Andruckstation 1913, pneumatisch erste Walze angetrieben, 2 zusätzliche Andruckrollen mit pneumatischer Einzelsteuerung • Kappstation 1918 (60 mm), pneumatisch (2 x 0,45 kW, 12.000 U/min), pneumatisch schwenkbar 0/10° • Multifunktionsfräsaggregat 1827, pneumatisch (2 x 0,65 kW, 200 Hz, 12.000 U/min) • Vertikale Abtastrollen, manuell Manuelle Einstellung der vertikalen Abtastrolle in 0,1 mm Schritten zum Überfräsen von Decküberständen, z.B. bei Kunststoffkanten Iodpfxex Huhco Aa Nstb • Fräser, Diamant Ø 56/60 mm, Z = 2, R = 2,0 mm, Linkslauf Vollwerkzeug, diamantbeschichtet mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Fräser, Diamant Ø 56/60 mm, Z = 2, R = 2,0 mm, Rechtslauf Vollwerkzeug, diamantbeschichtet mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Eckenkopieraggregat 1832 (1 x 0,35 kW, 200 Hz, 12.000 U/min), für Kantenstärken bis 3 mm • Fräser, Diamant Ø 53 x 10 x 16 mm, Z = 3, R = 2 mm, mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, für Profilaggregat 1832 • Ziehklingeneinheit 1929, pneumatisch einschließlich pneumatischer Verstellung (separat für oben und unten) • HW-Wendemesser für Ziehklingenhalter 1929 / 1927 R = 2,0 mm (2 Stück erforderlich) • Flachziehklingeneinheit 1964 Entfernen von Leimresten für saubere Leimfugen. • Poliereinheit 1940 (2 x 0,12 kW, 50 Hz, 1400 U/min) Zur Endreinigung und Kantenpolitur. Mit 2 Textilscheiben, Schwenkbereich 0–5°.

Kondisi: sangat baik (bekas), jarak tempuh: 252.923 km, pendaftaran pertama: 08/2014, jenis bahan bakar: diesel, konfigurasi gandar: 6x4, jarak roda: 3.200 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 400 l, rem: pengereman mesin, warna: biru, kabin pengemudi: kabin tidur, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, Tahun pembuatan: 2014, Perlengkapan: ABS, AdBlue, filter jelaga, kendali jelajah, kunci sentral, pendingin udara, pengaturan jendela elektrik, spion elektrik, spoiler,

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Edge bander HOLZHER, tipe 1310 dilengkapi dengan: stasiun lem patron, pemotong sirip rata, dua agregat multifreze, scraper profil, unit buffing, kondisi baik. Isdpjx H Sutjfx Aa Njtb

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: Machine has undergone complete overhaul: - New Glue Jet 301 adhesive system (upper part 1 mm) - All units checked - All cutters sharpened - All knives replaced Feed speed: 10 - 18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Electrical system for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control with 15" touchscreen ECO MODE energy saving function 1350 mm infeed ruler, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for edge jointing - Cutter, diamond-tipped Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond-tipped Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Itedpfswka Iijx Aa Nsb Edge feeder 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Hopper for granulate Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond-tipped Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond-tipped Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond-tipped Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond-tipped Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible knives for scraper head R = 2.5 mm (2 pcs. required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: 63934 Röllbach