Beli Ima Bima bekas (136)

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 3 Pusat Pemesinan Kayu CNC 3-sumbu IMA BIMA CUT 145/330 ini diproduksi pada tahun 2014. Mesin ini memiliki jangkauan kerja 3300 mm pada sumbu X dan 1450 mm pada sumbu Y, dengan daya spindle 18 kW. Mesin ini dilengkapi dengan majalah alat hingga 18 posisi dan sistem penjepit vakum untuk fiksasi benda kerja yang aman. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin IMA BIMA CUT 145/330 yang kami tawarkan. Silakan hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pemrosesan Kayu CNC Gtjdpfxsx D Nito Ah Djw

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Data Umum Berat mesin 6200 kg Penggerak Utama Rentang kecepatan spindle 8000–24000 rpm Jumlah sumbu 3 Pergerakan Pergerakan Sumbu X 3000 mm Pergerakan Sumbu Y 1200 mm Godpfsx D Rt Hox Ah Dstw Pergerakan Sumbu Z 100 mm Mesin 3-sumbu IMA BIMA 210 120/300 ini diproduksi pada tahun 2006. Mesin ini memiliki lintasan sumbu yang besar (X = 3000 mm, Y = 1200 mm, Z = 100 mm), cocok untuk mengakomodasi benda kerja hingga 2800 mm panjang dan 1200 mm lebar. Spindle utama menawarkan daya 7,5 kW dengan kecepatan antara 8.000 hingga 24.000 rpm. Bobot mesin sekitar 6.200 kg dan dilengkapi dengan kontrol CNC IMA IMATRONIC. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Perkayuan CNC

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.000 mm, jumlah sumbu: 3, produsen pengendali: SIEMENS, berat keseluruhan: 5.000 kg, daya motor spindle: 12.000 W, kecepatan spindel (maks.): 9.000 rpm, Additional Equipment • 1 vertical drilling unit in Y-direction • 1 vertical drilling unit in X-direction • 1 main spindle with programmable rotation direction • 1 centrally integrated CNC axis, 360-degree rotatable • 1 adapter unit for saw, fixed at 90 degrees • Saw blade diameter: 200 mm • 1 adapter unit for horizontal drilling and milling head (crosshead) • 1 adapter unit for horizontal milling cutter (face milling) • 2x adapter units for hinge boring • Includes 1 new Siemens vacuum pump + extensive accessories Machine Advantages Technical Machine Advantages • Max. clamping height from top edge of suction plate: z1 100 mm • Working height: 950 mm • Traverse speed: 20 m/min • Acceleration: 5 m/s² • Changeover field range without pendulum operation: x 2 x 1400 mm • Free space in the middle: x 200 mm • With pendulum operation: x 2 x 900 mm • Free space in the middle: x 1200 mm • Automatic tool feed • Feed force: 11,000 N Additional Information Media Gedpfxjx N Ulmo Ah Dotw Extraction standard: Connection for 200 mm, 120 mm, and 100 mm diameter Extraction speed: approx. 28 m/sec Extraction volume: approx. 3,200 m³ per hour 1 vacuum pump 40 m³/h Compressed air supply: Central connection for 1/2" with maintenance unit. Constant air pressure: 6 bar Electrical Equipment Electrical installation according to EN Control cabinet dimensions (HxWxD): 2,000 mm / 1,200 mm / 600 mm Safety and protective measures according to CE regulations

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 100 mm, jumlah sumbu: 3, kecepatan spindel (maks.): 24.000 rpm, en Gtodpsyap U Aefx Ah Djw

Kondisi: bekas, Tahun pembuatan: 1994, Lokasi gudang: Nattheim Gedpfx Ajwmm Nreh Dstw

Kondisi: bekas, nomor mesin/kendaraan: 006054, Area kerja sumbu X: 5300 mm Area kerja sumbu Y: 1300 mm Permukaan kerja: Dengan penyangga konsol vakum Daya spindle utama: 9 KW Gtjdpfx Aswcx T Uoh Djw Jumlah sumbu yang dikontrol: 5 sumbu Jumlah spindle bor: 32 Jumlah tempat alat: 8

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 24406, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 900 h, tegangan masuk: 400 V, frekuensi input: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – technical specifications (main) Gtjdjykn Dwepfx Ah Dow 🔹 Working area (axis travels) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, panel nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Functions and equipment (typical) • 5-sided drilling (top + X+/X−/Y+/Y− edges) • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel cutting combined with machining) • Automatic lubrication • Waste and chip conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture typically found on the market: approx. 2010–2016 (often 2014) • Application: furniture, MDF panels, HPL, solid wood, nesting

Kondisi: bekas, nomor mesin/kendaraan: 007842, arbeitsbereich-achse-x-5000-mm-arbeitsbereich-achse-y-1200-mm-ar beitsebene-mit-vakuum-konsolenauflagen-leistung-haupt-spindel-18- kw-anz-kontrollierte-achsen-4-achsen-maximale-kantenhoehe-64-mm-a nzahl-bohrspindeln-14-anzahl-werkzeugplaetze-18 Gedpfxoyhbius Ah Dstw

Kondisi: bekas, nomor mesin/kendaraan: 007841, arbeitsbereich_achse_x-arbeitsbereich_achse_y-arbeitsebene-leist ung_haupt_spindel-anz_kontrollierte_achsen-maximale_kantenhohe-an zahl_werkzeugplatze Gjdpeyg Ef Dofx Ah Djtw

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats included. PC control system type ICOS OPEN CNC with IMAWOP software. Work tables configured as console tables (No. 8 consoles, table width 1400 mm). Console table with LED/strip lighting. Automatic tool change system (magazine capacity – 18 slots). Useful working area (X-Y-Z): 4000 x 2100 x 300 mm. Useful working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. 2 working areas. Vacuum pump / capacity: 140 m³/h. Chip conveyor. With separate electrical and control cabinet. Total connected load: 32 kW. Working units (Upper): - No. 21 independent vertical drilling spindles (4 x 1.2 kW) Gjdpfx Aehu U Nxsh Dotw - No. 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edgebanding unit, edge banding aggregate (hot melt glue) VT 100 - Edgebanding material (rolls), thickness (min/max): 0.4 / 3 mm - Edgeband magazine for rolls (No. 2 compartments) OPTIONS: - Saw unit, max diameter 200 mm - Combination unit (flush milling and profile scraper) - Drilling head (with No. 4 horizontal drilling spindles)

Kondisi: sangat baik (bekas), CNC Machining Center (Point-to-Point) – 5 Axes (ROBOT Head) Gantry-type construction Control system: ICOS CNC – Software: IMAWOP / (Optional: IMAwinCAD) Safety enclosure for the working head Clamping table with 8 consoles LED positioning system on the X-axis for console placement and Y-axis for vacuum clamp positioning Automatic tool change system 2 rotary tool changers – magazine/tool positions (8) + TC8 (18) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity: 140 m³/h) Separate electrical and control cabinet. Total connected load: 23 kW WORKING UNITS (TOP SIDE): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (Drilling head motor power: 1.2 kW x 4) 1 grooving saw unit, diameter 125 mm, swivels 90° in X-Y direction 1 vertical main spindle (milling unit) Robot head (HSK F63) Vertical main spindle power: 9 kW Independent Z-axis with 650 mm stroke A-axis arranged/mounted at a 90° angle to the C-axis Gtsdpfofin Saex Ah Djw C-axis rotation range: 420°, A-axis rotation range: 140°

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control unit: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area (X - Y - Z) for edgebanding (mm): 3900 x 1450 x 60 Gtodpefbmqtofx Ah Dew No. 8 clamping tables with consoles (number of consoles) - mm 1200 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity: 140 m3/h) Safety enclosure for the working head, safety foot mats Chip conveyor belt No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool stations No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit - edgebander (hot melt glue) VT 50 Edge magazine for rolls (compartment no. 6) OPTIONALS: No. 1 adapter unit for saw, fixed at 90 degrees, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraping No. 1 adapter unit, horizontal drilling and milling head (cross head), 4 horizontal spindles

Kondisi: sangat baik (bekas), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with pod and rail system, incl. 6 working rails (length: 1400 mm) Automatic positioning of the rails (X-axis) Automatic positioning of vacuum pods (Y-axis) Automatic tool change system Rotary tool changer - magazine capacity: 18 tool holders Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X - Y - Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X - Y - Z): 4250 x 2200 x 60 mm Chip conveyor included Supplied with separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (UPPER): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels on the machine's vacuum pods 5 air tables for panel handling before processing Gsdpfx Ajvxhnush Djtw Vacuum system with programmable suction units for lifting panels onto the conveyor belt Panel outfeed system with motorized conveyor belts

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Gjdpfotixpuex Ah Dotw Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) Gsdpow A Ruqefx Ah Detw CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control system: ICOS CNC (IMAWOP software) Gtedpfxsq Nmuto Ah Dsw Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) in edge banding (mm): 3100 x 1925 x 60 No. 6 clamping table with consoles (number of consoles) – mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety tread mats No. 1 vertical main spindle (milling units) HSK F63 (18 kW) Automatic tool change system (rotary tool changer) with 18 tool positions No. 14 independent vertical drilling spindles (2 × 1.2 kW) Cross-unit with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – application head (hot melt glue) VT 100 No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 80.859 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.630 mm, RINCIAN TEKNIS Perjalanan sumbu X tanpa pengeleman: 6.000 mm Perjalanan sumbu X dengan pengeleman: 5.000 mm Perjalanan sumbu Y: 1.300 mm Perjalanan sumbu Y dengan spindle utama + diameter alat 20 mm: 1.630 mm Perjalanan sumbu Y dengan pengeleman: 1.450 mm Meja setting: Dyna Poin BIMA 410 V Pengisian: 4 tempat Unit pelapis tepi: tersedia Gjdpfx Ahsx Af Ivo Dotw Jam operasional: 80.859 jam

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Ηλεκτρονικά ελεγχόμενο κέντρο κατεργασίας CNC με: • τυπικό τραπέζι • χαλάκια ασφαλείας • 1 αντλία κενού 100 m³/h • IMATRONIC-NT • πλευρικά προστατευτικά (δεξιά) • με πόρτα και (αριστερά εμπρός) • φορητή κονσόλα ρύθμισης για τα πείρους και τα μπουλόνια στερέωσης Τεχνικά χαρακτηριστικά: • Περιοχή κατεργασίας με τυπικές μονάδες X/Y 6000/1200mm • Μέγ. ύψος σύσφιξης από το επάνω άκρο της πλάκας κενού Z1 100mm • Μέγ. πάχος πανέλου Z2 ανάλογα με τη χρήση • Ύψος τραπεζιού εργασίας περίπου 1000mm • Εναλλακτική περιοχή χωρίς κυκλική διαδικασία X 2 x 2650mm Ελεύθερος χώρος στη μέση X 700mm • Με κυκλική επεξεργασία X 2 x 2250mm Ελεύθερος χώρος στη μέση X 1500mm Gtedpfowyvfcox Ah Dew • Κεντρική λίπανση • Τροφοδοσία ρεύματος 3/N/PE, 400/230 V • IMAwinCAD για μηχανές BIMA συμπεριλαμβανομένης συγκόλλησης ακμών • IMAWOP • Κύριο άτρακτο HSK F63/κώνος διαμέτρου 38mm/12kW/ψύξη με νερό • 1 ενότητα διάτρησης πριονιών • 1 ενότητα πριονίσματος αυλακιών • Συγκόλληση ακμών VT 61

Kondisi: bekas, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on the X-axis: 7000 mm. Working area on the Y-axis: 1400 mm. Full table with support panel for positioning vacuum cups. Vacuum cups can be positioned manually on the work surface using a laser indicator. 2 vertical electrospindles with C-axis and automatic tool changer. Automatic tool changer with 18 positions located at the rear of the machine. Drilling head with 21 spindles, arranged as follows: * 11 vertical spindles on the X-axis * 10 vertical spindles on the Y-axis. Edge banding unit with glue pot and premelter for EVA glue (glue pot new in 2023). Nordson premelter unit for PUR bonding of foldable panels. No. 1 trimming unit (end cutter). No. 1 milling unit. No. 1 cross unit with 4 horizontal drilling lines. No. 1 blower unit. Edge storage unit with 2 positions. Carpet front protection and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS NEED TO BE VERIFIED. Gtjdpew El Nhofx Ah Djw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Lini edgebanding lengkap IMA Combima dengan stasiun pemuatan ini diproduksi pada tahun 2002. Mesin edge bander dua sisi yang kokoh ini memiliki lebar kerja 235 hingga 2600 mm dan panjang kerja 200 hingga 2600 mm. Mampu beroperasi dengan kecepatan 10 hingga 40 m/menit, mesin ini dilengkapi dengan unit milling jointing, unit lem semi-otomatis dengan majalah edge 6 buah, serta unit pemangkasan lurus dan profil. Pertimbangkan kesempatan untuk membeli edge bander dua sisi IMA Combima ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Gtodpfx Ahex D Iq Nj Dew Jenis Aplikasi Edgebanding

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Godpsyttrxjfx Ah Detw Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. The robust double-sided edge banding machine features a maximum feed width of 3,300 mm and processes workpiece thicknesses up to 60 mm. Equipped with the precise ICOS OPEN control system, it supports both roll and strip edge materials. Ideal for high-throughput environments that require flexibility and reliability in edge processing. Please contact us for further information about this machine. Additional equipment • Gluing unit for hot-melt adhesive: single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm Gtodpfx Ahox D I D Aj Dsw • End trimming unit: 2 motors, each 660 W, pneumatically tiltable 0° + 25° Machine advantages Technical machine advantages • Min. infeed width: 244 mm (during longitudinal processing) • Max. feed width: 3,300 mm • Max. workpiece width (with chain conveyor extension): 1,300 mm • Min. workpiece thickness: 8 mm • Max. workpiece thickness: 45 mm (with copying function) / 60 mm (without copying function) • Max. feed width: 3,300 mm • Fixed reference side: left in feed direction Additional information Scoring saw: 22 kW motor, 6,000 rpm, pneumatically controlled Rough trimming unit: 80 kW motor, 6,000 rpm Double trimming unit: 2 motors, each 45 kW, 9,000 rpm Flush trimming unit: 2 motors, 1,850 W, 12,000 rpm Multi-function unit: NC-controlled with 2 motors, automatic tool changer for 4 profiles Buffing unit: 2 motors, each 180 W, 1,400 rpm Grooving unit: 45 kW motor, 9,000 rpm Control unit ICOS OPEN: PC-based control system with integrated PLC and electronic track control, user-friendly interface with Windows standards

Kondisi: sangat baik (bekas), COMPLETE 4-SIDED SIZING AND EDGE BANDING LINE Gtjdpfxjun N Dlo Ah Dew The line consists of the following machines: A) W06027 1st Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /440 /A /R3 B) Rotation Station (90°) C) W06028 2nd Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /190 /B /R3

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transmission bar (Master & Slave systems) FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-adhesive) Godpfxsu Ekbno Ah Djtw Jointing unit 08.376 (KW 4.5 x2) Open station EDGE BANDING PROCESSING (for each side): Gluing station (hot melt adhesive) 283.205 Edge pressure zone. Edge magazine for rolls (No. 2 fold) End trimming unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min, servomotor) Milling unit 08.055 (KW 0.66 x 2) 0°-30° Multi-function unit (radius milling and profile milling) 08.342 (KW 0.66 x 2) Sprayer unit (for polishing liquid) Open station (for optional addition of a scraper) Buffing unit 08.617 (KW 0.18 x 2)

Kondisi: sangat baik (bekas), translation-001 Gtodowz Ic Ajpfx Ah Dew