Beli Ima Bima 410 bekas (132)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jumlah sumbu: 3, This 3-axis CNC woodworking center, IMA BIMA 410, was manufactured in 2000. It features a working area of 3000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking for high-quality woodworking capabilities, you should consider the IMA BIMA 410, which we are offering for sale. Please contact us for further details. Working area X: 3000 mm Working area Y: 1200 mm Max. clamping height Z1: 100 mm Max. workpiece thickness Z2: depending on configuration/application Table height: approx. 1000 mm Pendulum operation X: 2 × 1400 mm Clearance in center X: 200 mm Alternative pendulum operation X: 2 × 900 mm Alternative center clearance X: 1200 mm Machine weight: approx. 6000 kg Guide system: precision linear guides, hardened approx. 62 HRC Central lubrication: automatic for all main axes and ball screw Drive system: AC servo motors with encoders X/Y drive: rack and pinion Z drive: ball screw Feed speed: 40 m/min Rapid traverse X/Y: 80 m/min Rapid traverse Z: 25 m/min Acceleration: 3 m/s² Main spindle extraction port: 300 mm Drilling spindle extraction port: 120 mm Air velocity: approx. 28 m/s Air volume: approx. 7080 m³/h Vacuum pump capacity: 100 m³/h Compressed air connection: 1/2" Operating air pressure: 6 bar Control voltage: 24 V DC Connected load: approx. 24 kVA Power supply: 3/N/PE 400/230 V 50 Hz Frequency inverter: 0-480 Hz Ambient temperature: +15 to +35 °C Control system: IMATRONIC NT 231 Interpolation: linear all axes, circular 2.5D Resolution: 0.001 mm Spindle: HSK F63 Tool clamping force: 11000 N Max. tool weight: 6 kg Speed range: 1500-18000 rpm Spindle power: 7.5 kW Cooling: water-cooled CNC axis: 360° rotatable Tool magazine type: plate changer Tool positions: 18 Maximum tool length: 150 mm Maximum tool diameter: 100 mm (150 mm with empty adjacent positions) Maximum load: 60 kg Saw unit motor: 1.5 kW Saw speed: 5600 rpm Max. saw blade diameter: 150 mm Drilling unit: 14 spindles Spindle stroke: 70 mm Drive: 2.2 kW Speed: 3150 rpm Max. drill diameter: 20 mm Adapter head spindles: 4 Max. speed: 6000 rpm Max. drill diameter: 12 mm Table equipment: Pgjdpfx Aley Aw N Ue Isk 6 adjustable support arms 12 suction cups 114 × 159 × 100 mm 6 suction cups 125 × 75 × 100 mm Vacuum system: 2-circuit clamping system Control cabinet size: 2000 × 1800 × 600 mm DEFECT: The main spindle no longer releases the exchangeable drilling head.

Kondisi: bekas, nomor mesin/kendaraan: 007842, arbeitsbereich-achse-x-5000-mm-arbeitsbereich-achse-y-1200-mm-ar beitsebene-mit-vakuum-konsolenauflagen-leistung-haupt-spindel-18- kw-anz-kontrollierte-achsen-4-achsen-maximale-kantenhoehe-64-mm-a nzahl-bohrspindeln-14-anzahl-werkzeugplaetze-18 Pjdpfxjyhbiue Al Isgk

Kondisi: bekas, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on the X-axis: 7000 mm. Working area on the Y-axis: 1400 mm. Full table with support panel for positioning vacuum cups. Vacuum cups can be positioned manually on the work surface using a laser indicator. 2 vertical electrospindles with C-axis and automatic tool changer. Automatic tool changer with 18 positions located at the rear of the machine. Drilling head with 21 spindles, arranged as follows: * 11 vertical spindles on the X-axis * 10 vertical spindles on the Y-axis. Edge banding unit with glue pot and premelter for EVA glue (glue pot new in 2023). Nordson premelter unit for PUR bonding of foldable panels. No. 1 trimming unit (end cutter). No. 1 milling unit. No. 1 cross unit with 4 horizontal drilling lines. No. 1 blower unit. Edge storage unit with 2 positions. Carpet front protection and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS NEED TO BE VERIFIED. Podpfx Ajw El Nhel Iogk

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Ηλεκτρονικά ελεγχόμενο κέντρο κατεργασίας CNC με: • τυπικό τραπέζι • χαλάκια ασφαλείας • 1 αντλία κενού 100 m³/h • IMATRONIC-NT • πλευρικά προστατευτικά (δεξιά) • με πόρτα και (αριστερά εμπρός) • φορητή κονσόλα ρύθμισης για τα πείρους και τα μπουλόνια στερέωσης Τεχνικά χαρακτηριστικά: • Περιοχή κατεργασίας με τυπικές μονάδες X/Y 6000/1200mm • Μέγ. ύψος σύσφιξης από το επάνω άκρο της πλάκας κενού Z1 100mm • Μέγ. πάχος πανέλου Z2 ανάλογα με τη χρήση • Ύψος τραπεζιού εργασίας περίπου 1000mm • Εναλλακτική περιοχή χωρίς κυκλική διαδικασία X 2 x 2650mm Ελεύθερος χώρος στη μέση X 700mm • Με κυκλική επεξεργασία X 2 x 2250mm Ελεύθερος χώρος στη μέση X 1500mm • Κεντρική λίπανση • Τροφοδοσία ρεύματος 3/N/PE, 400/230 V • IMAwinCAD για μηχανές BIMA συμπεριλαμβανομένης συγκόλλησης ακμών • IMAWOP • Κύριο άτρακτο HSK F63/κώνος διαμέτρου 38mm/12kW/ψύξη με νερό • 1 ενότητα διάτρησης πριονιών Pgedpfowyvfcox Al Ijk • 1 ενότητα πριονίσματος αυλακιών • Συγκόλληση ακμών VT 61

Kondisi: bekas, Tahun pembuatan: 1994, Lokasi gudang: Nattheim Pgodpfx Ajwmm Nrsl Iek

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 20787, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, IMA BIMA 410 V 140/600 – Professional CNC Woodworking Machining Center. The machine features a gantry construction, designed for the production of furniture, staircases, and special components. A large Z-axis range (600 mm) allows for the machining of tall workpieces. It is equipped with a 7.5–11 kW spindle, automatic tool changer, vertical and horizontal drilling heads, and a vacuum table with consoles. Controlled via IMA WOP. Manufacturer: IMA (Germany) Model: BIMA 410 V 140/600 Type: CNC woodworking machining center (point-to-point) 🧩 Working Area • X-axis: up to approx. 6000 mm • Y-axis: approx. 1400 mm • Z-axis: version 140 / 600 mm (high Z axis – large clearance) • Number of axes: 3–5 (depending on configuration and operating head) ⚙️ Main Spindle • Power: 7.5 – 11 kW • Spindle speed: 1,500 – 24,000 rpm • Tool holder: HSK F63 • Max. tool diameter: approx. 100–150 mm • Max. tool length: approx. 150 mm • Max. tool weight: approx. 6 kg 🔧 Tool Magazine • Automatic tool changer • Number of positions: 18 🪚 Machining Units (typical) • Vertical drilling heads: up to 21 spindles • Horizontal (cross) drilling heads • Special aggregates (optional): • lock case milling • grooving saw • fitting aggregates (Blum / Lamello) • angle head aggregates 🧲 Work Table • Vacuum pod & rail table (consoles) • Approx. 8 working consoles • Vacuum pumps: 2 units (approx. 100–140 m³/h) Pedeyky Hdjpfx Al Ijgk ⚡ Drives and Feed Rates • Rapid traverse: • X: up to approx. 100 m/min • Y: up to approx. 80 m/min • Z: up to approx. 25 m/min 💻 Control System • CNC: IMA WOP / IMAWOP (optionally Siemens / Beckhoff) ⚙️ Installed Power • Total connected load: approx. 23 kW 📏 Machine Weight • Approx. 6,500 – 8,500 kg (depending on configuration)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 24406, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 900 h, tegangan masuk: 400 V, frekuensi input: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – technical specifications (main) 🔹 Working area (axis travels) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle Pgodeykn Dwjpfx Al Isk • Spindle power: approx. 18 kW • Applications: milling, drilling, panel nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Functions and equipment (typical) • 5-sided drilling (top + X+/X−/Y+/Y− edges) • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel cutting combined with machining) • Automatic lubrication • Waste and chip conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture typically found on the market: approx. 2010–2016 (often 2014) • Application: furniture, MDF panels, HPL, solid wood, nesting

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 24205, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 4.800 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 100 mm, panjang benda kerja (maks.): 4.800 mm, lebar benda kerja (maks.): 1.800 mm, jumlah slot dalam magazin alat: 18, berat keseluruhan: 16.000 kg, daya motor spindle: 12.000 W, jumlah spindel: 1, diameter benda kerja (maks.): 1.800 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, Außergewöhnliche Maschine mit herausragender Bearbeitungsqualität. Die Maschine wurde durch IMA-Techniker gewartet, wobei ausschließlich Original-Ersatzteile verwendet wurden. Die Lichtwellenleiter sowie die Mehrheit der Druckluftleitungen wurden durch Neuteile ersetzt. Die automatische Positionierung der Vakuumsauger beschleunigt die Einrichtzeit erheblich. Mit ImaWoop Version 6.0 inklusive Quicktool gestaltet sich die Bedienung besonders benutzerfreundlich. Eine Besichtigung der Maschine im Betrieb ist jederzeit möglich. Alternativ bieten wir Ihnen gerne eine Live-Videoübertragung zur Visualisierung der laufenden Maschine an. CNC-Portal-Bearbeitungszentrum Hersteller: IMA Typ: BIMA P 480 V, 180/480 Baujahr: 2001 Kurzbeschreibung: Hochflexible Maschine für vielseitige, komplexe Bearbeitungsaufgaben (Fräsen, Bohren, Sägen, Kantenanleimung, diverse Winkelschnitte) - alternierende Bearbeitung - X = 2 x 2.400 mm, Y = 1.800 mm - Hauptspindel 12 kW - 18-fach Werkzeugwechsler - Kantenanleimaggregat mit 6-fach Rollenmagazin Beschreibung: Bearbeitungsbereich mit Standardaggregaten: Y = 1.800 mm Tischbereich für alternierende Bearbeitung: X = 2 x 2.400 mm (Fräs- und Bohrbearbeitung) X = 2 x 2.100 mm (Kantenanleimung) Pgsdpfxett Rpws Al Ijk CNC-Steuerung: IMATRONIC NT 231 Software: ImaWoop 6.0 - automatische Positionierung der Vakuum­sauger - automatische Zentralschmierung - Förderband für Späne und Abfall (Bandförderer) Hauptspindel 12 kW mit integrierter C-Achse (360 Grad) Automatischer 18-fach Werkzeug-/Adapterwechsler 1 Kantenanleimaggregat VT100 mit Leimauftragseinheit - Kantenstärke: 0,4 – 3 mm - Für 4-seitige Kantenanleimung und umlaufende Kantenanleimung auf Stoß - 6-fach Rollenmagazin 1 Endbesäumaggregat, 0,8 kW Inklusive Adapteraggregate: - Säge, fest 90 Grad - Horizontalbohraggregat (4-fach) - ABS-Kantenfräsaggregat - ABS-Kantenradius- und Flächenabziehaggregat Weitere Adapter und Werkzeuge gegen Aufpreis verfügbar Spanabtransport über Gurtförderer Klimatisierter Schaltschrank inklusive

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Pgjdstixpuspfx Al Iok Workpiece outfeed with motorized rollers and 90° angle transfer system

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, IMA BIMA CUT Rentang kerja (perpindahan sumbu) • Sumbu X: ± 3300 mm • Sumbu Y: ± 1450 mm • Jumlah sumbu: 3 (umumnya X, Y, Z) Spindle • Daya spindle: ± 18 kW dan 12 kW • Penggunaan: milling, pengeboran, nesting panel, pelapisan lengkung Magasin alat • Pergantian alat otomatis (ATC): hingga 18 posisi Sistem penjepit material • Meja vakum dengan balok dan cup penghisap yang diposisikan otomatis 🛠️ Fitur & perlengkapan (standar) • Pengeboran dari 5 sisi (atas + sisi X+/X−/Y+/Y−) • Agregat gergaji untuk pemotongan dan penggrooving Podpeyzc Nkofx Al Iegk • Opsi agregat milling horizontal (HBO) • Meja pemuatan & pembongkaran otomatis (tergantung konfigurasi) • Sistem nesting (pemotongan panel dengan pemrosesan simultan) • Pelumasan otomatis • Pembuangan limbah dan serbuk (konveyor sabuk)

Kondisi: sangat baik (bekas), 4-axis CNC-controlled MACHINING CENTER Pgodevxhnuspfx Al Iok Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with pod and rail system, incl. 6 working rails (length: 1400 mm) Automatic positioning of the rails (X-axis) Automatic positioning of vacuum pods (Y-axis) Automatic tool change system Rotary tool changer - magazine capacity: 18 tool holders Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X - Y - Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X - Y - Z): 4250 x 2200 x 60 mm Chip conveyor included Supplied with separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (UPPER): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels on the machine's vacuum pods 5 air tables for panel handling before processing Vacuum system with programmable suction units for lifting panels onto the conveyor belt Panel outfeed system with motorized conveyor belts

Kondisi: bekas, nomor mesin/kendaraan: 007841, arbeitsbereich_achse_x-arbeitsbereich_achse_y-arbeitsebene-leist ung_haupt_spindel-anz_kontrollierte_achsen-maximale_kantenhohe-an zahl_werkzeugplatze Pedpfxsyg Ef De Al Iegk

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Data Umum Podpsx D Rt Hofx Al Iogk Berat mesin 6200 kg Penggerak Utama Rentang kecepatan spindle 8000–24000 rpm Jumlah sumbu 3 Pergerakan Pergerakan Sumbu X 3000 mm Pergerakan Sumbu Y 1200 mm Pergerakan Sumbu Z 100 mm Mesin 3-sumbu IMA BIMA 210 120/300 ini diproduksi pada tahun 2006. Mesin ini memiliki lintasan sumbu yang besar (X = 3000 mm, Y = 1200 mm, Z = 100 mm), cocok untuk mengakomodasi benda kerja hingga 2800 mm panjang dan 1200 mm lebar. Spindle utama menawarkan daya 7,5 kW dengan kecepatan antara 8.000 hingga 24.000 rpm. Bobot mesin sekitar 6.200 kg dan dilengkapi dengan kontrol CNC IMA IMATRONIC. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Perkayuan CNC

Kondisi: bekas, nomor mesin/kendaraan: 006054, Area kerja sumbu X: 5300 mm Area kerja sumbu Y: 1300 mm Permukaan kerja: Dengan penyangga konsol vakum Daya spindle utama: 9 KW Jumlah sumbu yang dikontrol: 5 sumbu Jumlah spindle bor: 32 Pjdpswcx T Usfx Al Isgk Jumlah tempat alat: 8

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats included. PC control system type ICOS OPEN CNC with IMAWOP software. Work tables configured as console tables (No. 8 consoles, table width 1400 mm). Console table with LED/strip lighting. Automatic tool change system (magazine capacity – 18 slots). Useful working area (X-Y-Z): 4000 x 2100 x 300 mm. Useful working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. 2 working areas. Vacuum pump / capacity: 140 m³/h. Chip conveyor. With separate electrical and control cabinet. Total connected load: 32 kW. Working units (Upper): - No. 21 independent vertical drilling spindles (4 x 1.2 kW) - No. 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edgebanding unit, edge banding aggregate (hot melt glue) VT 100 - Edgebanding material (rolls), thickness (min/max): 0.4 / 3 mm - Edgeband magazine for rolls (No. 2 compartments) OPTIONS: Podpehu U Nxofx Al Iogk - Saw unit, max diameter 200 mm - Combination unit (flush milling and profile scraper) - Drilling head (with No. 4 horizontal drilling spindles)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control unit: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area (X - Y - Z) for edgebanding (mm): 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - mm 1200 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity: 140 m3/h) Safety enclosure for the working head, safety foot mats Chip conveyor belt No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool stations Pjdpfjfbmqtsx Al Iegk No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit - edgebander (hot melt glue) VT 50 Edge magazine for rolls (compartment no. 6) OPTIONALS: No. 1 adapter unit for saw, fixed at 90 degrees, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraping No. 1 adapter unit, horizontal drilling and milling head (cross head), 4 horizontal spindles

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Pedpfx Asw A Ruqjl Iegk Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control system: ICOS CNC (IMAWOP software) Psdpjq Nmutofx Al Iogk Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) in edge banding (mm): 3100 x 1925 x 60 No. 6 clamping table with consoles (number of consoles) – mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety tread mats No. 1 vertical main spindle (milling units) HSK F63 (18 kW) Automatic tool change system (rotary tool changer) with 18 tool positions No. 14 independent vertical drilling spindles (2 × 1.2 kW) Cross-unit with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – application head (hot melt glue) VT 100 No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 80.859 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.630 mm, RINCIAN TEKNIS Perjalanan sumbu X tanpa pengeleman: 6.000 mm Perjalanan sumbu X dengan pengeleman: 5.000 mm Perjalanan sumbu Y: 1.300 mm Psdpsx Af Ivefx Al Isgk Perjalanan sumbu Y dengan spindle utama + diameter alat 20 mm: 1.630 mm Perjalanan sumbu Y dengan pengeleman: 1.450 mm Meja setting: Dyna Poin BIMA 410 V Pengisian: 4 tempat Unit pelapis tepi: tersedia Jam operasional: 80.859 jam

Kondisi: bekas, nomor mesin/kendaraan: 005637, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Podpfjvw Ev Hjx Al Iegk Mesin pelapis tepi: Mesin 1 Lebar panel maksimum: 1300 mm Kecepatan maju maksimum: 50 m/menit Unit kerja, sisi kanan: 11 unit Unit kerja, sisi kiri: 12 unit

Kondisi: bekas, nomor mesin/kendaraan: 006017, Posisi 1: Gudang vertikal IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 2: Gergaji panel tipe sudut IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 3: Loader IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 4: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 5: Mesin pelapis tepi Batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 6: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 7: Mesin pelapis tepi Batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 8: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 9: Mesin pelapis tepi Batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 10: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 11: Mesin pelapis tepi Batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pgodpfx Aljwukzhs Iok Posisi 12: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110

Kondisi: bekas, nomor mesin/kendaraan: 005635, pl-lt-hu-it-nl-lv-nb Pgodswuudyopfx Al Isk

Kondisi: bekas, nomor mesin/kendaraan: 005642, Mesin pelapis tepi dua sisi IMA + MEINERT-COMBIMA/II/650/A/R3 Pgjdpfx Aewuciwol Ijk

Kondisi: bekas, nomor mesin/kendaraan: 005639, Jenis tepi terpasang: tepi tipis, tepi tebal Pjdpsvw Evgjfx Al Iegk Sistem perekat: EVA Unit multifungsi: ya Mesin pelapis tepi: Mesin 1 & 2 Lebar panel maksimum: 3000 mm Kecepatan pengumpanan maksimum: 50 m/menit Unit kerja, sisi kanan: 12 unit Unit kerja, sisi kiri: 12 unit

Kondisi: bekas, nomor mesin/kendaraan: 007514, Position 1: Transfer IMA-COMBIMA SYSTEM I Position 2: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 3: Transfer IMA-COMBIMA SYSTEM I Position 4: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 5: Transfer IMA-COMBIMA SYSTEM I Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM I Pjdjwukznopfx Al Iegk Position 7: Transfer IMA-COMBIMA SYSTEM I Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 9: Transfer IMA-COMBIMA SYSTEM I