Beli Ima Bima 410 bekas (141)

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure with V-belt drive Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (KW 4.5 x2) Free slot Gluing unit (hot melt adhesive) 04.1570 Edge pressure zone Edge magazine for rolls (No. of compartments) 2 End trimming unit 08.42 (KW 0.66 x 2) 0°-25° Milling unit 08.055 (KW 1 x 2) 0°-30° Multi-function unit (radius milling and contour milling unit) 08.342 (KW 0.66 x 2) Profiling scraper unit 08.519 Kodpfxjd Rcigs Aglswt Flat scraper unit 08.50 Spraying unit (for polishing fluid) Buffing unit 08.612 Free slot (for groove / rebate unit)

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) Kodpfx Asfi Tg Hjglewt No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: sangat baik (bekas), Zum Anleimen von Kanten an gerade, runde und profilierte Werkstücke - Manuelle Zuführung der Werkstücke - Mit Leimbecken und Leimauftragswalze - Mit Coil-/Rollenhaltertisch - Min./Max. Werkstückdicke: 16 / 40 mm - Kantenbanddicke: 0,4 bis 3 mm Kjdpfx Agshgbfaoljwt - Schwenkbarer Tisch 0°-45° - Gesamtinstallierte Leistung ca. 4 kW

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Upper pressure: driven by V-belt Spraying unit (for liquid release agent) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (no. of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (2 x 0.66 kW) Ksdpfx Ageflc Uholswt Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: seperti baru (mesin pameran), LEFT-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 - in strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser - max 44) Control ICOS Open Feed speed m/min (adjustable) 16 - 30 Pressure beam driven by V-belt Spraying unit (for liquid release agent) Adjustable fence, CNC-controlled Panel infeed system 700.101 (mm 500 x 500) Jointing unit with CNC-controlled 08.379 (kW 4.0 x 2) edge pressure zone (CNC-controlled) Gluing section (P.U.R. glue + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spraying unit (for separating liquid) Pressure zone + edge magazine for rolls (compartment No.) 6 Linear end trimming unit 08.428 LKA V30/2 (kW 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC-controlled) 08.0587 (kW 1.0 x 2) 4 profiles Kjdpfx Aegbug Njglewt Contour milling unit (for fine milling) CNC-controlled KFA 20 (kW 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617-4 (kW 0.18 x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (kW 4.5 x 2) 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for stack discharge from the unloader No. 1 external motorized roller conveyor at the stacking area Ksdpfewbp Nwex Agljwt Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Ksdpfx Ajd Nuu Heglowt Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: sangat baik (bekas), Single-sided edge banding machine (left) Kjdpem Udfwefx Agljwt Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips / laths (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Pressure beam: V-belt driven Spraying unit (for liquid release agent) Adjustable fence (CNC controlled) Jointing unit with CNC control 08.378 (2 x 4.5 kW) Workpiece edge heating lamps Gluing unit (hot melt glue + pre-melter) 04.1570 Spraying unit (for separating fluid) Edge pressure zone Edge magazine for rolls (compartment number): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying unit (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Form copy milling unit 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Smoothing unit 08.53

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 20 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Compact Feed speed m/min (adjustable) 6 - 30 Top pressure: V-belt driven Adjustable fence, CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps to heat the sides of the workpieces Gluing station (hot melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.) 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding liquid) Kedpjidqphefx Aglswt Contour trimming unit (for fine trimming), CNC-controlled 08.348 (KW 0.66 x 2), 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving/rabbetting and profiling 08.183 (Kw 3 x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGEBANDING MACHINE (LEFT-HAND SIDE) Kedpfsr Ttflex Aglowt Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edges possible with limitations up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorised timing belt Spray unit (for liquid anti-adhesive) Adjustable fence Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (number of compartments): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and contour trimming) 08.342 CNC-controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal routing unit for grooving/rabbetting and profiling 08.190 (1 x 4.5 kW)

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Kodpfokt Uuasx Aglowt Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Kwjdpfx Agoi Hn Srolst Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 8 – 60 Control ICOS open compact Feed speed m/min (adjustable) 6 – 30 Top pressure: driven by V-belt, spray unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable fence rule CNC-controlled. Panel infeed system Barcode reader Jointing cutter unit with CNC control 08.379 (2 x 4.0 kW) Heater for workpiece edge warming Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge pressure zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (slot no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free space Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1) Kwsdpfx Ageltmnlelot

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 3 / 12 Panel thickness (min/max) mm 8 / 60 Kjdpfx Aed Nt N Hoglowt Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Pressure beam: driven by V-belt Spraying unit (for liquid anti-adhesive) Adjustable guide fence, CNC controlled Joint milling unit 08.379 (2 x 4.0 kW) Gluing unit (hot melt adhesive & PUR glue) 283.1513 Edge pressure zone (CNC-controlled) Edge magazine for rolls (compartment No.): 1 End trimming unit 08.415 (2 x 0.66 kW) Pre-milling unit 08.055 (2 x 1.0 kW) Copy shaping unit (profile copy) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile scraper unit 08.519 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving, rebating, and profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed table 65.152 (mm 500 x 500) Return conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Penggerak Utama Rentang kecepatan spindle: 12000 rpm Edgebander IMA NOVIMAT I /G80/390/R3 ini diproduksi pada tahun 2013. Dilengkapi dengan dua motor 4,5 kW pada 150 Hz, mencapai kecepatan hingga 9000 rpm. Mampu menangani ketinggian pinggiran dari 14 hingga 65 mm dan diameter rol hingga 850 mm, sangat ideal untuk kebutuhan edgebanding yang presisi. Pertimbangkan kesempatan untuk membeli IMA NOVIMAT I /G80/390/R3 edgebander ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Kwedpfx Agox D Nh Aslot Jenis Aplikasi Pelapis Tepi

Kondisi: bekas, Milling unit Fine milling unit bottom and top in good condition tested for functionality Kwedpfx Agjqwdu Relet

Kondisi: bekas, Milling unit down Kjdpfx Ajqwdufoglewt up

Kondisi: bekas, Milling unit Profile milling unit, controlled Ksdpfx Agongz Awolswt 2 kW motor Price includes functional testing

Kondisi: bekas, nomor mesin/kendaraan: 008301, position-ima-sirio-novimat-1 Kjdpfox A Tmmox Aglswt

Kondisi: bekas, nomor mesin/kendaraan: 006089, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Jointing cutter: yes Multi-function unit: yes Max. feed speed: 30 m/min Maximum panel thickness: 60 mm Working units: 8 pcs Kjdpeim S Hqofx Agljwt

Kondisi: bekas, nomor mesin/kendaraan: 005657, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: PUR Prapemotongan: ya Unit multifungsi: ya Unit atas profil: ya Kedpfx Ajwcx Tueglewt Kecepatan maju maks.: 30 m/menit Ketebalan pelat maks.: 60 mm Unit kerja: 13 unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06686, panjang total: 8.700 mm, Mesin Edge Banding IMA Advantage 7200 – PU – dilengkapi lengkap Data teknis: • Tahun produksi: 2001 • Kontrol: IMA IMATRONIC 121 • Ketebalan maksimal edging: 20 mm • Ketebalan maksimal panel: 50 mm • Panjang minimal elemen: 150 mm • Lebar minimal elemen: 65 mm • Kecepatan pengumpanan: hingga 20 m/menit Ksdpfx Agsx Igwloljwt • Pengumpanan stepless • Penyesuaian ketinggian elektrik • Penekan atas dengan sabuk Perlengkapan / unit: • Perencana pra-milling • Lampu pemanas • Pelebur PU • Sistem aplikasi lem – panci yang dapat diganti • Gergaji pemotong ujung • Milling edging • Unit pembulatan sudut • Unit pengamplasan • Sikat profil • Sikat datar • Unit pemoles • Stasiun penghalusan Dimensi: • Panjang mesin: 8700 mm Kondisi: Mesin lengkap, berfungsi, siap digunakan. Dapat dinyalakan dan diuji.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, MA HKA Mesin Penempel Tepi Manual dalam kondisi berfungsi penuh. Mesin pelapis tepi untuk komponen berbentuk. Berbagai selang udara bertekanan baru saja diganti sepenuhnya. Ketebalan tepi: 0,4 - 3 mm Ketebalan panel: 16 - 45 mm Lebar strip: 20 - 50 mm Daya terpasang: 2,6 kW Radius luar minimum: Tergantung pada kemampuan pelengkungan material tepi Radius dalam minimum: 150 mm, tergantung karakteristik material Termasuk lengan derek dan penarik pegas Meja vakum dengan 4 zona dapat diaktifkan Kedpfjx H Un Ajx Aglswt Rol, bantalan vakum (termasuk set karet baru tambahan) untuk meja vakum #C1

Kondisi: baik (bekas), Used IMA 863 fabric spreading machine, width 240 cm, working width 220 cm, table length 16 meters, blower, new unwinding sheets. Price: €7,000.00. Kjdpfst Ipnqox Aglewt

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kode Produsen: 401110 - Kondisi: Bekas - Fungsionalitas: Berfungsi sepenuhnya - Mesin Kompatibel: CNC IMA BIMA - Jika berminat, kami menawarkan layanan perbaikan, silakan hubungi kami. Berat dan dimensi untuk pengiriman: 4KG 36X26X21 CM Kwsdevu A A Sspfx Aglet