Beli Ima Hka bekas (132)

Kondisi: sangat baik (bekas), de_hu_001 Dedpfxoxggthe Alyswa

Kondisi: diremajakan ulang (bekas), Single-sided FORMAT PROCESSING and EDGE BANDING MACHINE (LEFT SIDE) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Edging thickness in battens/strips (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/software: IMATRONIC 121 /01 Feed speed (adjustable) m/min: 6 - 30 FORMAT PROCESSING: Jointing cutter unit with CN control 08.376 (2 x 4.5 kW) Spraying unit (for liquid anti-stick agent) EDGE BANDING SECTION: Lamps for heating workpiece edges Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for rolls (compartment No. 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0–25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°–30° + spraying unit (for sliding fluid) Contour milling unit (for fine milling), CN-controlled 08.348 (2 x 0.66 kW) Multi-profile scraper unit (CN-controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Djdpfscr T N Dox Alyjwa Radius sanding unit for straight edge WI (4 x 0.75 kW)

Kondisi: sangat baik (bekas), KOMPLETTE_DOPPELSEITIGE_FORMAT-UND_KANTENANLEIMMASCHINEN Dodpsxftt Esfx Alyewa

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats included. PC control system type ICOS OPEN CNC with IMAWOP software. Work tables configured as console tables (No. 8 consoles, table width 1400 mm). Console table with LED/strip lighting. Automatic tool change system (magazine capacity – 18 slots). Useful working area (X-Y-Z): 4000 x 2100 x 300 mm. Useful working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. 2 working areas. Vacuum pump / capacity: 140 m³/h. Chip conveyor. With separate electrical and control cabinet. Total connected load: 32 kW. Working units (Upper): - No. 21 independent vertical drilling spindles (4 x 1.2 kW) - No. 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edgebanding unit, edge banding aggregate (hot melt glue) VT 100 Dwjdpfx Ajhu U Nxslyja - Edgebanding material (rolls), thickness (min/max): 0.4 / 3 mm - Edgeband magazine for rolls (No. 2 compartments) OPTIONS: - Saw unit, max diameter 200 mm - Combination unit (flush milling and profile scraper) - Drilling head (with No. 4 horizontal drilling spindles)

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a processing line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transfer bar (Master & Slave systems) Safety and noise protection enclosure Dwsdpsfi Tkvsfx Alysa Retractable stops, spacing (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing station (P.U.R. adhesive + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°–30° Multifunction unit (radius milling and contour trimming) MFA 08.342 (0.66 kW x 2) max. 25 m/min Contour milling unit (copier) 08.465 (0.18 kW x 4) max. 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free position

Kondisi: sangat baik (bekas), Double-sided edge banding and formatting machines – First (1st) machine in the line Edge thickness in rolls (min/max) mm Edge thickness in strips/bands (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (Master & Slave systems) Top pressure driven by V-belt FORMATTING UNIT (for each side): Dwsdpfxefi Tkgo Alyoa Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and formed edges (softforming) mm 1,050 Edge magazine for rolls (magazine slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Flat scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in roll (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control system: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid release agent) Adjustable fence, CNC controlled Jointing milling unit with CNC-controlled pressure zone 08.379 (4.0 kW x 2) Glue application unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (compartments no.): 6 End trimming unit 08.42/30/B (0.2 kW x 2), max. 30 m/min (0°-25°) Milling unit 08.0587 (1.0 kW x 2), 4 profiles Multi-function unit (corner rounding and profile milling unit) KFA 20 (0.5 kW x 1), max. 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (0.18 kW x 4) Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1) 90°/180°/270° CNC Dwodjd Scydspfx Alyea

Kondisi: bekas, Complete factory for furniture manufacturing, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Mod. GammaDue (3800x2200 mm) SZ0M26) Panel saw (multi-blade) "GABBIANI" (finished panels 4250 x 2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper / veneer / laminated SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper / veneer / laminated SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with second double-sided sizing and edge banding machine "STEFANI" and "TOMASSINI" handling. SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with "NARDELLO" Mod. Elegance splitter. SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining centre "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and rewinding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Honeycomb panel preparation line SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (mm??x mm ??). SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Various other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelving (wall racks), forklift trucks, pallet trucks, and more. The machines are still installed at the user and can be inspected by arrangement. Djdpfx Aljcr U Uroyewa

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Upper pressure: driven by V-belt Spraying unit (for liquid release agent) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (no. of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (2 x 0.66 kW) Profile scraping unit 08.519 Dwjdpfsflc Uhsx Alyja Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: seperti baru (mesin pameran), LEFT-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 - in strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser - max 44) Control ICOS Open Feed speed m/min (adjustable) 16 - 30 Pressure beam driven by V-belt Spraying unit (for liquid release agent) Adjustable fence, CNC-controlled Panel infeed system 700.101 (mm 500 x 500) Jointing unit with CNC-controlled 08.379 (kW 4.0 x 2) edge pressure zone (CNC-controlled) Gluing section (P.U.R. glue + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spraying unit (for separating liquid) Pressure zone + edge magazine for rolls (compartment No.) 6 Linear end trimming unit 08.428 LKA V30/2 (kW 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC-controlled) 08.0587 (kW 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC-controlled KFA 20 (kW 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617-4 (kW 0.18 x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (kW 4.5 x 2) 90°/180°/270° (CNC) Dodpfxegbug No Alyjwa

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control unit: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area (X - Y - Z) for edgebanding (mm): 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - mm 1200 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity: 140 m3/h) Safety enclosure for the working head, safety foot mats Chip conveyor belt No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool stations Dodpfxsfbmqte Alyewa No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit - edgebander (hot melt glue) VT 50 Edge magazine for rolls (compartment no. 6) OPTIONALS: No. 1 adapter unit for saw, fixed at 90 degrees, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraping No. 1 adapter unit, horizontal drilling and milling head (cross head), 4 horizontal spindles

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW) Dodpfx Aod Nuu Helyowa

Kondisi: sangat baik (bekas), Single-sided edge banding machine (left) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips / laths (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Pressure beam: V-belt driven Spraying unit (for liquid release agent) Adjustable fence (CNC controlled) Jointing unit with CNC control 08.378 (2 x 4.5 kW) Workpiece edge heating lamps Gluing unit (hot melt glue + pre-melter) 04.1570 Spraying unit (for separating fluid) Edge pressure zone Edge magazine for rolls (compartment number): 16 Dwjdpjm Udfwofx Alyoa End trimming unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying unit (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Form copy milling unit 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Smoothing unit 08.53

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 20 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Compact Feed speed m/min (adjustable) 6 - 30 Dwjdpfxjidqpho Alysa Top pressure: V-belt driven Adjustable fence, CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps to heat the sides of the workpieces Gluing station (hot melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.) 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding liquid) Contour trimming unit (for fine trimming), CNC-controlled 08.348 (KW 0.66 x 2), 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving/rabbetting and profiling 08.183 (Kw 3 x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGEBANDING MACHINE (LEFT-HAND SIDE) Dwedjr Ttfljpfx Alysa Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edges possible with limitations up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorised timing belt Spray unit (for liquid anti-adhesive) Adjustable fence Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (number of compartments): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and contour trimming) 08.342 CNC-controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal routing unit for grooving/rabbetting and profiling 08.190 (1 x 4.5 kW)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Djdpfjtixpusx Alyjwa Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system

Kondisi: sangat baik (bekas), de-hu-01 Dedpfsyk Tkvex Alyjwa

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 Dwodpew A Ruqsfx Alysa No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° Dedpfx Alokt Uuaeyswa M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Dwedpfx Alsi Hn Srsysa Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Dwedpfx Aloq Nmutoysa Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) in edge banding (mm): 3100 x 1925 x 60 No. 6 clamping table with consoles (number of consoles) – mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety tread mats No. 1 vertical main spindle (milling units) HSK F63 (18 kW) Automatic tool change system (rotary tool changer) with 18 tool positions No. 14 independent vertical drilling spindles (2 × 1.2 kW) Cross-unit with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – application head (hot melt glue) VT 100 No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 8 – 60 Control ICOS open compact Feed speed m/min (adjustable) 6 – 30 Top pressure: driven by V-belt, spray unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable fence rule CNC-controlled. Panel infeed system Barcode reader Jointing cutter unit with CNC control 08.379 (2 x 4.0 kW) Heater for workpiece edge warming Dodpfxoltmnlo Alyjwa Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge pressure zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (slot no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free space Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 3 / 12 Panel thickness (min/max) mm 8 / 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Pressure beam: driven by V-belt Spraying unit (for liquid anti-adhesive) Adjustable guide fence, CNC controlled Dodpfod Nt N Hox Alyowa Joint milling unit 08.379 (2 x 4.0 kW) Gluing unit (hot melt adhesive & PUR glue) 283.1513 Edge pressure zone (CNC-controlled) Edge magazine for rolls (compartment No.): 1 End trimming unit 08.415 (2 x 0.66 kW) Pre-milling unit 08.055 (2 x 1.0 kW) Copy shaping unit (profile copy) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile scraper unit 08.519 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving, rebating, and profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed table 65.152 (mm 500 x 500) Return conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open Feed rate m/min (adjustable): 7-35 Top pressure: V-belt driven, spray unit (for liquid non-stick agent) Adjustable fence: CNC controlled. Panel feeding system A2 / 30 Dwodpfxeifnzdj Alyea Jointing unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments no.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Kondisi: sangat baik (bekas), de-hu-01 Dwodpfeyxl Siox Alyoa