Beli Index 25 bekas (145)

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), A fully overhauled CNC multi-spindle lathe by Index, refurbished in 2020, is available. Number of spindles: 6, maximum bar capacity: 32 mm, spindle speed: 6300 rpm, weight: approx. 10,800 kg, control system: Siemens Sinumerik. Spindle bearing status measurements in 2024: HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive refurbishment on the spindles, cooling system, bearings, hydraulic lines, and more. Documentation is available. On-site inspection is possible. Kedowr Dw Rjpfx Aahefa

Kondisi: bekas, TECHNICAL DATA - Spindle power: 10.5 kW Kfsdpfeuhbgwex Aahja - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Worktable travel X/Z: 110/90 mm - Number of tools: 8 - Driven tools speed: 6,000 rpm - Driven tools power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1,700 x 3,000 x 2,400 mm - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT - Siemens 840D CNC control - C axis

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 080005, Turning diameter over carriage: 1,920 mm Centre height: 1,300 mm Distance between centres: 2,000 to 30,000 mm Maximum workpiece weight: 10–40 tons Bed width: 2,119 mm Spindle speed: 1–500 rpm Number of gear steps: 4 Spindle nose: A2-15 Spindle motor: 30/37 kW (optionally up to 60/75 kW) Spindle bore: 230 mm (expandable up to 610 mm) Turret type: servo, 4 or 10 positions Tool cross-section: 50/40 mm X-axis travel: 1,200 mm Z-axis travel: 2,000 to 30,000 mm X-axis ballscrew: 63 mm x P10 Z-axis ballscrew: 63 mm x P10 (over 5 m: 80 mm x P10) Tailstock quill diameter: 235 mm (optionally up to 360 mm) Tailstock quill stroke: 250 mm (optionally up to 300 mm) Tailstock quill taper: MT #7 Kfodpfxewab Rdj Aahea Rapid traverse: 7 m/min

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, sk->de Kfsdow Hg Hqspfx Aahea EINZELNE MODULE: 1. HALBAUTOMATISCHER DEPALETTIERER (Modell: Depal 512 – mini) zum Entladen von Glasflaschen von Paletten, 1 Bediener erforderlich, um die Palette in die Maschine einzubringen und die Kartonzwischenlagen zwischen den Glasflaschenschichten zu entfernen 2. UNIVERSELLE SPÜLMASCHINE (Modell: IND-Wash 56 S2) für die Dampfdesinfektion und Heißwasserspülung der Flaschen vor dem Befüllen 3. ROTATIONSFÜLLMASCHINE (Modell: IND-Dose 46 PO-12) zum Abfüllen des heißen Produkts in Glasflaschen mit Zylinderform 4. VERSCHLIEßMASCHINE FÜR TWIST-OFF-VERSCHLÜSSE (Modell: IND-Close 12E) für das Vakuumverschließen der gefüllten Flaschen mittels dampfinduzierter Vakuumtechnik 5. PASTEURIER- UND KÜHLTUNNEL (Modell: PT 42-9) für die weitere kontinuierliche Pasteurisierung des Produkts 6. VAKUUMPRÜFMASCHINE (Modell: IND-Test 61) zur Kontrolle und Aussortierung von nicht ordnungsgemäß verschlossenen Flaschen 7. TROCKNUNGSMASCHINE (Modell: IND-Blow 86) zum Trocknen von Restfeuchtigkeit auf der Flaschenoberfläche vor der Etikettierung 8. LINEARE ETIKETTIERMASCHINE ZUR ANBRINGUNG SELBSTKLEBENDER ETIKETTEN (Modell: IND-Lab 32B) mit Etikettierung von oben (über dem Verschluss) und seitlich auf zylindrischen Flaschen 9. AUTOMATISCHE GRUPPIER- UND SCHRUMPFVERPACKUNGSMASCHINE MIT TRAY UND FOLIE (Modell: IND-pack 29 T) zum Verpacken der Flaschen auf Kartontrays in verschiedenen Konfigurationen, je nach Flaschengröße 10. SATZ FLACHOberasCHENFÖRDERER (Modell: IND-Trans 71) zur Verbindung der verschiedenen Module der Linie (Förderbänder zwischen Spülen, Füllen und Verschließen mit Abdeckhauben)

Kondisi: baik (bekas), Tahun pembuatan: 1997, Index ABC Year of manufacture: 1997 Machine number: 400621 Spindles: 1 Maximum diameter: 50 mm Turrets: 2 Stations: 8 on turret 1 / 6 on turret 2 C-axis is programmable 1 synchronizing spindle in the machine + 2 for regeneration High-pressure pump: yes, 30 bar Kfodpfohd U Hfex Aahja

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 800 mm, diameter pembubutan: 280 mm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 310 mm, jarak gerak sumbu Z: 870 mm, daya motor spindle: 22.000 W, kecepatan rotasi (maks.): 4.000 rpm, tinggi total: 2.200 mm, panjang total: 4.100 mm, lebar total: 2.000 mm, berat keseluruhan: 4.600 kg, diameter ayun di atas peluncur melintang: 400 mm, diameter luar chuck: 315 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Kami dengan senang hati siap melayani pertanyaan Anda melalui telepon. Kfedow Nn Elopfx Aahoa

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), An Index bar feeder is available. Bar diameter (round material): 10mm-65mm, max. bar diameter (hexagonal material): 55mm, max. bar diameter (square material): 46mm, bar length range: 1700mm/4200mm, feed force: 1500N, rapid traverse: 50m/min, feed rate: 30m/min. Machine length: approx. 5300mm, machine weight: approx. 2700kg. Documentation available. On-site inspection is possible. Kfjdpfx Aowtg E Hsahsa

Kondisi: bekas, TECHNICAL DATA Kfedpouhbgdsfx Aahsa - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - X/Y/Z travels: 280/280/145 mm - Rapid traverse: 50 m/min - Table travel X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg - Installed power: 2.5 kW ACCESSORIES - CNC Siemens 840D - C-axis

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jumlah spindel: 2, produsen pengendali: Siemens, model controller: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindle! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool carrier 1: Motorized milling spindle, tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT1 XYB Tool carrier 2: Motorized milling spindle, tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available Ksdowylz Tepfx Aahjfa 8 bar coolant pump: on cleaning system Medium/high-pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min, max. 80 bar Fine coolant filtration: Compact band filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine equipment: available Control: Siemens 840D Solution-Line EQUIPMENT Tool changer Electronic shaft for spindles and drive units Main spindle expansion stages Stop device incl. coolant through MSP with solenoid valve Counter spindle expansion stages Stop device incl. coolant through CSP with solenoid valve Accuracy package Portal take-off device Finished parts conveyor belt 1,250 mm hinged belt chip conveyor with lift pump Chip discharge right side Coolant supply and fine filtration INDEX LMS 3,200 SBL bar loading magazine Boring direction for SBL Various tool holders (static and driven) Various sleeves for the bar loading magazine

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 12 mm, panjang umpan sumbu Z: 50 mm, Automatic single-spindle screw machine Kedpowvigrsfx Aahofa

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.250 mm, diameter spindel: 90 mm, jumlah slot dalam magazin alat: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cables and hoses for drag chains of Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle bore HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: Taper No. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / driven: 12 / 6 Coolant system Type: Knoll unit with paper band filter Low pressure: 8 bar Kfsdjvitznjpfx Aahja High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chucks - Numerous turning and drilling holders with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous static holders CDI-Capto C4 radial and axial

Kondisi: baru, Tahun pembuatan: 2023, General Control system: Siemens 840 DSL Main Spindle Bar capacity: 65 mm Max. speed: 5,000 rpm Spindle bore: 85 mm Spindle nose: AD140 Drive power: 27 kW Torque: 145 Nm Tool Turret Tool holder: ISO-10889 Number of stations: 2 x 12 Driven tools: 2 x 12 Max. speed: 6,000 rpm Kfodpfxjrxc Eio Aahja Y-axis travel: ±60 mm B-axis: 360 degrees Workpiece Loading/Unloading Type: Schnaithmann Designed for: 12 pallets Pallet size: 160 mm x 200 mm Maximum system load: 500 kg Equipment Chip management: Chip conveyor Coolant management: Eco-Fluid coolant unit, switchable 8/80 bar Coolant tank: 750 l with paper band filter

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Turning diameter: 200 mm, swing diameter: 260 mm, turning height: 200 mm, spindle bore: 30 mm, spindle speed: 7,500 rpm, power: 10 kW, torque: 49 Nm. Travel X/Z: 520 mm / 200 mm, rapid traverse X/Z: 30 m/min, tool stations: 14, tool holder: VDI 30, driven tool speed: 6,000 rpm. Machine dimensions X/Y/Z: approx. 2,100 mm / 2,100 mm / 2,300 mm, weight: approx. 3,300 kg, control: Siemens Sinumerik. The machine's X-axis exhibits running noise. Documentation available. On-site inspection possible. Kedpfx Aaevpvinshefa

Kondisi: bekas, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Table travel X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT Kfodpfx Aaouhbf Tehoa - Siemens 840D CNC control - C axis

Kondisi: baru, Traces of storage Kfjdpswcq Tyofx Aahja

Kondisi: seperti baru (mesin pameran), Image No. 1408 As-new VDI40 DIN 69880 Toolholder Collet Chuck Collet: DIN 6388-A; Type: 444E Item No. 433011- Kodpfxok Nz Ehj Aahofa You can find additional VDI40 toolholders at www.wk-sales.de Collets DIN 444E or ER 40 with clamping nut. Collet shown in the picture is for illustration purposes only and is not included in the scope of delivery | Ø 13-14mm External diameter: 50mm Clamping length: 65mm

Kondisi: baik (bekas), Tahun pembuatan: 2006, INDEX MS52C CNC-Mehrspindeldrehautomat Baujahr: 2006 Steuerung: Siemens 840D 6 Spindeln Stangendurchlass: 52 mm Wie abgebildet ausgestattet Unter Strom (Vorführung möglich) Ausstattung: - Knoll System - Späneförderer - Riedel Kühler - 3,6 Meter (12 Fuß) IEMCA SIR Stangenlader Kfsdpfx Aaot Rkzwjhja Modell: SIR MS52/F Typ: 38 XL Baujahr: 2005

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Maximum turning diameter: 620 mm Maximum turning length: 1,500 mm Control system: Siemens 808D Spindle bore: 100 mm Maximum diameter over bed: 420 mm Spindle speed range: 10 – 4,000 rpm Kfsdpfjlar N Njx Aahoa Main drive: 41 kW Rapid traverse speed: 10,000 mm/min Total power requirement: 65 kW Machine weight approx.: 9 t Machine dimensions approx.: 6.4 x 3.0 x 2.5 m CNC control unit: Siemens 808D with new servomotors and drives, 24 months warranty on equipment - Chip conveyor - Tool cooling system - Tailstock - 8-position tool turret INCLUDED OPTION - Steady rest

Kondisi: siap digunakan (bekas), A CNC vertical lathe from Index with a C-axis, driven tools, and palletizing system is available. Spindle bore: 30 mm, speed: 5,000 rpm, power: 7 kW, torque: 33 Nm, travel X/Z: 200 mm/520 mm, rapid traverse X/Z: 30 m/min, feed force X/Z: 5,000 N, C-axis resolution: 0.001°, tool positions: 12, rotational speed: 6,000 rpm, turning diameter: 270 mm, swing diameter: 325 mm, turning length: 200 mm. Machine dimensions X/Y/Z: approx. 3,250 mm/2,100 mm/2,250 mm, weight: approx. 3,200 kg, control: Siemens. Documentation available. Inspection on site possible. Kfedpfx Aewp R U Dsahsa

Kondisi: baru, Index MS32 DRIVE Z-NC SPK1 Item ID: GM2602.1551 Ball Screw Item ID: 10912112 previous Item ID: GM2602.1551 Ksdpfxswb Evmo Aahefa from stock/residual stock - offered as shown in the pictures -