Beli Jendela Jenis Elektromat bekas (3.355)

Kondisi: bekas, en-GB Iaodeywkc Ropfx Afisr

Kondisi: baru, de-hu-it-lt Iedjyrtyyjpfx Afiear

Kondisi: bekas, Tahun pembuatan: 2004, Slot spindle 2 pcs Number of milling units: 7 pcs Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Iedpfxoyrtzko Afiear Weinig Uncontrol 12 with radial and axial NC spindles and VARIO table ..... Machine has already been professionally dismantled and stored in 73447 Oberkochen Technical Data Summary (possibly included additional accessories available upon request) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 3,000–6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for cut section identification > Axial adjustment range 150 mm, NC axis, electronically stepless > Radial adjustment range pneumatic, 8 positions, e.g. for top edge rounding Rounding Unit ..... > Position: horizontal, bottom > Axial adjustment together with the cross-cut saw. Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and Slotting Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm, NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Synchronous counter pressure, full clamping length is countered 2nd Tenoning and Slotting Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm, NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Synchronous counter pressure, full clamping length is countered Transfer belt ..... For transfer of parts to longitudinal processing, including double part separation before infeed to the longitudinal machining section. 1st Profiling Spindle (Climb and Conventional Milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, NC axis, stepless > Radial adjustment range: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool cutting diameter: 140 mm > Max. tool cutting diameter: 232 mm 2nd Profiling Spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, NC axis, stepless > Radial adjustment range: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool cutting diameter: 140 mm > Max. tool cutting diameter: 232 mm 3rd Profile Milling Unit (Grooving device from above) ..... > Position: horizontal top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm, NC axis, stepless > Radial adjustment range: 125 mm, NC axis, stepless > Spindle speed: ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 18.990.620 h, Fungsionalitas: berfungsi sepenuhnya, lebar kertas (maks.): 520 mm, tinggi kertas (maks.): 360 mm, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, Heidelberg Printmaster 52-2 Isdpfxjwa Ulze Afioar Με: - Εκτύπωση δύο όψεων (1+1) - Κονσόλα - Ψυγείο - 19.000.000 εκτυπώσεις - Έτος κατασκευής 2004

Tahun pembuatan: 2022, Kondisi: bekas, Mesin bekas Pemotong sambungan jendela Fitur dan data teknis: Iodpfxeyq T I Io Afisar - Daya input: 1900 Watt - Daya output: 1220 Watt - Kecepatan tanpa beban: 7800 rpm - Maks. diameter cakram frais: 170 mm - Kedalaman potong: 0-55 mm - Tinggi potong/lebar sambungan mulai 4,7 mm - Penyesuaian tinggi potong dengan interval 2 mm - Jarak minimal ke permukaan bawah: 2,5 mm - Dapat diputar 180° - Ulir spindel: M 14 - Berat: 4,5 kg - Tekanan suara LpA: 99 dB(A) - Tingkat daya suara LWA: 110 dB(A) Ketersediaan: segera Lokasi gudang: 63934 Röllbach

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi kerja penuh dan dalam keadaan baik. Dimensi kerja: 3200 x 2200 mm Iodpfxoxmr Rxj Afiear Pengaturan dimensi dikontrol secara elektrik dari panel kontrol. Ditenagai oleh unit hidrolik.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching between saw cutting and zero-cut wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for 6 x 80 mm tools, 15 kW motor Isdpfoxmr N Isx Afioar 3. Longitudinal/profile milling spindle (synchronous) 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal/profile milling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 6. Longitudinal/profile milling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on right side, 3 kW motor Fittings spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position tool changer Electronic length stop 3600 mm Workpiece return via automatic rotary system Automation package Interval-controlled sash support Double parts package Laminated fabric tabletops (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Kondisi: baik (bekas), Slitting saw blades, window milling tool, indexable inserts, window manufacturing tool - Slitting saw blades, milling tool for: wooden windows - EXAKT (brand or model) - Bore: Ø 50 mm Ijdeb A Rg Sspfx Afioar - 1x pallet of tools - Various sizes - Weight including pallet: 346 kg

Kondisi: bekas, Tahun pembuatan: 2006, machineseeker-1345 Iasdpfxsyn R Imo Afior

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, in-line-workstation-nutek Iaedjyv H E Sopfx Afijr

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of manufacture: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require additional information, please contact us by message or phone. CNC machining center for processing wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). 2 four-axis working heads for simultaneous machining (20 kW each). Automatic loading and unloading tables. Optionally, it is possible to purchase an extensive tool package (tool holders, angle aggregates, profile heads). Machine currently in continuous operation. Machine purchased in 2024 after a complete overhaul. Since then, it has been operating for 15 months on a single shift. Technical data: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The maximum working length is achieved by repositioning the element multiple times in the clamp. Milling spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Rotation directions: right/left C axis: yes Feed speeds: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Magazine for milling spindle no. 1: - magazine type: disk-type - magazine capacity: 18 tools - holder spacing: 100 mm - max weight of single tool: 10 kg - max total weight of tools: 130 kg - tool holder type: HSK F 63 Milling spindle no. 2: Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Rotation directions: right/left C axis: yes Feed speeds: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Magazine for milling spindle no. 2: - magazine type: disk-type - magazine capacity: 18 tools - holder spacing: 100 mm - max weight of single tool: 10 kg - max total weight of tools: 130 kg - tool holder type: HSK F 63 External tool magazine: - magazine type: linear - capacity: 120 tools - holder spacing: 80 mm - tool holder type: HSK F 63 Loading table: cross automatic Unloading table: cross automatic CNC control system: PLC control: Siemens S7 Mobile control panel. Supervisory computer: - operating system: Microsoft Windows - modem for data transfer and diagnostics Ijdpfx Afoyu Sn Usisar - touch screen Siemens Sinumerik 840 D Number of axes: 4 Machine fully operational, currently in continuous production. For an additional fee, it is possible to purchase extensive equipment: 8 angle aggregates, set of 3 standard tool holders, set of 17 new spindles for heads.

Kondisi: sangat baik (bekas), 7382 TECHNICAL DATA Tenoning carriage: - Electrically driven carriage feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450 mm, extendable to 1150 mm - Cross fence on carriage – cutting length on extendable telescope: 1860 mm - Rotating block in the cross fence - 2 pneumatic clamps Cross-cut saw: - Max blade diameter: 380 mm - Max cutting height: 110 mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle height/stroke regulation via handwheels - Max tool diameter: 320 mm - Spindle diameter: 40 mm - Working spindle height: 220 mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle height/stroke regulation via handwheels - Max tool diameter: 200 mm - Working spindle height: 220 mm - Spindle diameter: 54 mm - Spindle lock - Extendable support from table - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200 mm - Blade bore diameter: 30 mm Iodpfxoymm Nqe Afisar - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50 mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameter: 60 mm, 2x130 mm, 110 mm, 100 mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600 mm, weight approx. 2500 kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Cross-cut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (depending on exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lini pengelasan dengan logistik (URBAN tahun 2008 / SOENEN tahun 2018) Iasdpfx Ajv Enw Nefior Lini pengelasan URBAN €10.000 Lini pengelasan dengan logistik SOENEN €25.000

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: tiga fasa, tinggi kerja: 150 mm, We offer this very well-maintained SCM Multiflex C window and door machining centre, year of manufacture 1995, for sale. Purchase date: June 1995 Power of tenoning unit: 15 hp Power of profiling spindles: 10 hp each Height of tenoning spindle: 320 mm Height of profiling spindles: 320 mm Electrical connection: 3x230 V Glazing bead recovery system Iedpfxeyvhnuj Afisar The machine is still in very good working condition. It has only had one user during all these years. This machine has been used in a family joinery workshop, father and son. The machine is therefore definitely not worn out. It is being sold due to modernization of the machine fleet. A new SCM corner joint machine has been purchased. The machine can still be tested until June. Fully operational. All functions of the machine are still working. Sold without cutters.

Kondisi: baik (bekas), Tahun pembuatan: 2006, berat kosong: 7.800 kg, Dijual: alat pengangkat bekerja dengan baik. Tiang telah direvisi total, semua kabel dan selang telah diganti. Ketinggian kerja 14m. Tukar tambah dan transportasi bisa didiskusikan. Info lebih lanjut, silakan telepon atau kirim pesan. Iajdpsyu Rn Hsfx Afijr

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 160.000 km, pendaftaran pertama: 06/2016, jenis bahan bakar: diesel, berat keseluruhan: 2.743 kg, bahan bakar: diesel, warna: putih, kelas emisi: Euro 5, jumlah tempat duduk: 6, Tahun pembuatan: 2016, Perlengkapan: ABS, kantung udara, lampu kabut, pendingin udara, pintu geser,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 7.300 kg, tinggi total: 1.750 mm, panjang total: 10.000 mm, lebar total: 3.750 mm, lebar kerja: 3.800 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Iaodjyt Hn Tepfx Afisr Lini ini dapat digunakan untuk aplikasi berikut: Pemotongan tenon Pengukiran profil Pembuatan jendela dan joinery eksterior Jendela geser & pintu Prancis Jendela miring Pintu lemari solid Produksi massal dengan presisi tinggi RINCIAN TEKNIS Lebar kerja: 3.800 mm DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 10.000 x 3.750 x 1.750 mm Berat total: 7.300 kg PERLENGKAPAN Konstruksi industri yang kokoh Cocok untuk profil 68 mm dan 90 mm Dapat dioperasikan oleh 1 orang Akurasi pengulangan tinggi

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm #2809 Weinig Unicontrol 6 ----- Technical Data Overview (Additional included accessories upon request) Item 1: Cross-cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for detection of the saw section Length stop, CNC-controlled ----- > Length: 3,600 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenoning and Slotting Spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st Profiling Spindle (Climb and Conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for manufacturing narrow, short parts (e.g. glazing bars) Muntin guide consisting of: Muntin support rail from above in the area of the vertical right profile milling unit and profiling spindle. Item 5: Profile Milling Unit Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm Iasdextvgkepfx Afior > Axial adjustment path: 52 mm, indexed to 2 positions > Radial adjustment path: 125 mm, indexed to 2 positions Item 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment path: 90 mm, indexed to 3 positions > Radial adjustment path: 100 mm, indexed to 2 positions > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Electrically adjustable feed height incl. mechanical digital readout and manual feed beam clamping > Rebate unit for tear-free rebating > Dual part package > Return conveyor for single-operator handling: pivoting belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction connection diameters: ----- Cross-cut saw: 80 mm Slot spindle: 140 mm Profile spindle 1: 140 mm Profile spindle 2: 140 mm Grooving unit, top...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Meja Perakitan Daun Jendela Rotox, tahun pembuatan 2007; pemasukan sekrup otomatis, tinggi obeng dapat diatur, unit bor bantalan sudut, rak perlengkapan. Iasdpfx Aoyr Arxjfior

Kondisi: bekas, Used control cabinet from a Weinig Unicontrol 6, suitable as a spare parts donor or for constructing a new control cabinet. Contents include, among others: Ijdpfx Afjt Na Drjiear - Hilger & Kern brake unit - Rathgeber transformer type ET 1000.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, PALETTE WRAPPER YOM 2006 UNIPACK TYPE 606 Isdpfxev Hlzue Afioar

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 3.200 mm, diameter alat: 400 mm, diameter spindel: 50 mm, langkah spindel: 640 mm, kecepatan spindel (maks.): 3.000 rpm, panjang spindle milling: 320 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: AC (pendingin udara), tinggi kerja: 130 mm, lebar kerja: 200 mm, SCM Windor 60/100 – Angle Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The subject system is a window and door production line, type Windor 60/100 by SCM Group, year of manufacture 2005. This is a CNC-controlled angle processing centre for industrial machining of frame and sash components. The system is designed for series production and enables precise, repeatable processing in integrated process steps. 2. Main Components of the System 2.1 Angle Processing Centre SCM Windor 60/100 Iedpfx Afjx Nqqxjijar The SCM Windor 60/100 is of modular construction and designed as an angle machining unit. Machining is carried out on a tenoning side and a profiling side, arranged at right angles to each other. The system combines several machining steps such as milling, drilling, grooving, rebating, and tenoning in a continuous, CNC-controlled process. Key features: * CNC multi-sided machining * Several milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the production line and provides precise drilling operations for joints and fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling operations and consists of two machining sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling 2.4 Löwer Wide-Belt Sander A wide-belt sander from Löwer is integrated into the production line. The machine is solely used for surface sanding to improve the surface quality of the processed components. 3. Control, Operation, and Safety The system is equipped with CNC control, managing all machining operations, tool changes, as well as feed and spindle movements. Operation is semi-automated or fully automated by trained personnel. The safety equipment corresponds to the state of the art at the time of installation (year of manufacture 2005) and includes in particular: * Mechanical safety devices and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL Planer (10-spindle) To expand the existing machinery, the installation of an SCM Topset XL planer with 10 spindles is planned. The machine will be operated as an independent processing station at a separate location within the production hall and will not be integrated into the Windor system’s CNC control. The system is available and can be dismantled at any time. Dismantling and transport must be organised by the purchaser. Available from: 07/01/2026

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, lebar kertas (min.): 130 mm, lebar kertas (maks.): 780 mm, tinggi kertas (min.): 6 mm, tinggi kertas (maks.): 1 mm, kapasitas produksi: 8.000 unit/jam, Mesin dalam kondisi hampir baru dengan hanya 50 jam operasi! DETAIL TEKNIS Ukuran kertas maksimum: 950 x 780 mm Ukuran kertas minimum: 150 x 130 mm Ukuran jendela maks.: 380 x 300 mm Ukuran jendela min.: 50 x 50 mm Ketebalan kertas: 1 - 6 mm Kecepatan: 8.000 pcs/jam DETAIL MESIN Tegangan masuk: 380 V Iasdpfx Ajyl U A Ajfijr Jam kerja: 50 jam Dimensi & Berat Dimensi (P x L x T): 7.500 x 1.750 x 1.700 mm Berat total: 3.200 kg PERLENGKAPAN Pengolahan jendela standar dan sudut Posisi presisi dengan sistem sentrisasi otomatis Tingkat otomatisasi tinggi Kontrol mudah dengan layar sentuh Konstruksi kokoh

Kondisi: baik (bekas), Tahun pembuatan: 2001, CNC bed-type milling machine, manufacturer: IBERIMEX-MVR Model: UH-1250, Year of manufacture: 2001 Control system: Heidenhain TNC124 Travel ranges: X-axis 1250 mm, Y-axis 500 mm, Z-axis 460 mm Clamping table: 360 mm x 1800 mm Iaodpfjd Eransx Afior Spindle taper: ISO50 Machine equipped with full enclosure. For further technical details, please refer to the machine data sheet. The machine is in good condition.

Kondisi: bekas, Tahun pembuatan: 2004, Manufacturer: KOCH Ijdpfx Afswrnh Hjijar Model: Windoor 410 Year of manufacture: 2004 Machine Description / Technical Data Machining center for window and entrance door elements Manufacturer: KOCH Model: Windoor 410 Year: 2004 Processing operations: - Hinge drilling (sashes) - Strike plate marking drillings - Mounting hole drilling (frames) - Strike plate milling - Strike plate milling (4 mm rebate clearance) Workpiece dimensions: Workpiece length: 300 – 4,500 mm Workpiece width: 20 – 240 mm Workpiece thickness: 20 – 150 mm The machine is equipped with 2 working zones. Max. machining length with 2 working zones: 1,100 mm Max. machining length with 1 working zone: 2,500 mm Machining units: a) Horizontal drilling unit with 1 spindle fixed at a 7 degree angle b) Horizontal drilling head with 3 individually selectable drilling spindles c) Horizontal milling unit for lock cases, strike plate milling d) Vertical milling unit for profile change milling, strike plate milling e) Vertical drilling unit with 5 individually selectable drilling spindles f) Glue application and dowel insertion station, dowel size 8 x 60 mm Connection data: Electrical connection: 400 V, 50 Hz, 3-phase Voltage fluctuations: max. +6% to -10% Immediately available