Beli Kellenberg bekas (109)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Hasil lainnya:
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - di luar
KELLENBERGERR125-1000
Hubungi
Kondisi: bekas, en-001
Nedpfx Agod Ih Egolscl
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGER1500U BEMA Aktuell VISION
Hubungi
Kondisi: bekas, Grinding diameter: 350 mm
Grinding length: 1,500 mm
Centre height: 175 mm
Machine weight approx. 3 t
High-End Kellenberger 1500U
Ideal for spindle manufacturers or spindle overhaul specialists
- BEMA internal grinding attachment with separate, cooled motor
Grinding spindle and internal grinding spindle motor electrically interlocked!
Internal grinding spindle can only be switched on when in position
A quantum leap in safety technology
- Infinitely variable grinding spindle speed: 1,000–1,500 rpm
- Infinitely variable internal grinding spindle speed: 0–100%
- Digital display of spindle speeds
- Swivel angle display – upper table
- Swivel angle display – wheel head
- Marposs touch sensor for external grinding only
- Marposs fluid touch sensor for internal grinding
- Centre height up to 250 mm possible
Machine has already been delivered.
An identical machine can be assembled with additional options.
Nedpfx Ajt Ii Rrsglecl
At present, the machine does not comply with the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015).
The determination of the necessary minimum protective measures must be established through a risk assessment according to BetrSichV.
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGERURF320
Hubungi
Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm
Grinding length: 600 mm
Centre height: 320 mm
Machine equipped with reinforced workpiece spindle head for
unsupported grinding of heavy workpieces.
Nedpfxsv Dxxzs Aglscl
The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol
in accordance with the Kellenberger new machine directive.
At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015.
An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGER1000U BEMA Aktuell
Hubungi
Kondisi: bekas, Grinding diameter: 250, 350, 450 mm
Grinding length: 1000 mm
Centre height: 125, 175, 225 mm
Grinding wheel diameter: 400 mm
Grinding wheel width: 50 mm
Bore: 127 mm
Workpiece spindle taper: MK5
Workpiece spindle speed: 20–400 rpm
Workpiece headstock swivel range: 360°
Grinding headstock swivel range: 180 +/- °
Grinding spindle speed: 1500, 1700, 2200 rpm
Incremental infeed per stroke: 0.001–0.030 mm/Ø
Continuous infeed: 0–0.95 mm/Ø
Table swivel range: ±8°
Table longitudinal travel: 1300 mm
Table speed: 0.02–6 m/min
Workpiece weight between centres: 130 kg
Max. workpiece weight (unsupported): 130 kg incl. fixture
Internal spindle mount: 70 mm
Total power requirement: 6.5 kW
Machine weight approx.: 2.5 t
Space requirement approx.: 4.2 x 2.0 m
As a global leader in Kellenberger overhauls/retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your recently delivered machines with additional options such as:
- Splash guard doors
Ncedpfx Aeuxftxeglol
- X-axis enclosure
- Grinding headstock swivel angle indicator
Available at extra cost.
Geometrically overhauled and newly painted with original electrics.
The machine features central lubrication and roller guideways on the X-axis flat slide as well as standard air lift on the grinding headstock.
- Digital readout on 2 axes. X-axis resolution: 0.5 µm
Options:
- Rotary encoder with digital readout on the workpiece headstock
- Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible)
- New robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment
- Centre height increase up to max. 225 mm
- Variable speed control for the grinding spindle
Included:
- Operating tools
- Draw tube for chuck
Further accessories available on request.
At present, the machine tool does not meet the basic health and safety requirements as stated in BetrSichV 2015.
A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGERURF320
Hubungi
Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm
Nsdpfx Agovq R Uzelocl
Grinding length 600 mm
Centre height 320 mm
Machine was overhauled according to Kellenberger measurement protocol and newly painted.
The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process.
The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces.
Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGERKEL-VITA mit Lader
Hubungi
Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm
Grinding length: 1000 mm
Centre height: 175 mm
Control: Fanuc 310is
Completely mechanically overhauled.
Including grinding process and setup for one workpiece.
Original photo of the machine from EMO 2010.
CNC control: GE Fanuc 310is
Hand panel for CNC control GE Fanuc
With Wenger loader
Rotary part with automatic 1° indexing
Grinding head UR 1-2-3
Grinding wheel assembly left: 500 x 80 mm
Grinding wheel assembly right: 400 x 63 mm
Operating unit for a high-frequency internal grinding spindle MFV / MFZ
High-frequency internal grinding spindle MFN 1090
Coolant supply through the workpiece spindle
Dressing device on the upper table
Swivelling holder for PCBN diamond plates
Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices
KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS
KEL-TOUCH on the workpiece spindle for internal and external grinding
Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME
Preparation for external filter
Coolant shut-off for table units
Fully enclosed for emulsion
Mist extraction unit for emulsion
Maintenance unit for pneumatic auxiliary functions
Ncodpfsvdk N Eox Aglel
Preparation for KEL-VITA gantry loader
KEL-POS, MOVOMATIC: Measuring probe C25
Hydraulic preparation for arbour steady rest
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGER1000U BEMA Economic
Hubungi
Kondisi: bekas, Grinding diameter: 250, 350, 450 mm
Grinding length: 1000 mm
Centre height: 125, 175, 225 mm
Grinding wheel diameter: 400 mm
Grinding wheel width: 50 mm
Bore: 127 mm
Workpiece spindle taper: MK5
Workpiece spindle speed: 20–400 rpm
Workpiece headstock swiveling: 360°
Grinding headstock swiveling: 180° ±
Grinding spindle speed: 1500, 1700, 2200 rpm
Incremental infeed: 0.001–0.030 mm/Ø
Continuous infeed: 0–0.95 mm/Ø
Table swiveling range: ±8°
Table longitudinal travel: 1300 mm
Table speed: 0.02–6 m/min
Workpiece weight between centres: 130 kg
Max. workpiece weight (overhung): 130 including clamping unit kg
Internal spindle mounting: 70 mm
Total power requirement: 6.5 kW
Machine weight approx.: 2.5 t
Nodjv I Eq Sepfx Aglocl
Space required approx.: 4.2 x 2.0 m
Immediately available, naturally with a 12-month warranty!
Geometrically overhauled and repainted with new electrics.
In KELLENBERGER quality!!!
- Digital display on 2 axes. Resolution on the X-axis: 0.5µm
- Modern workpiece headstock with MK5 taper
- Modern tailstock with MK3 taper
- Modern hydraulic unit
- Paper band filter
Additional accessories available on request
The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015.
An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGERKEL-VARIA UR175-1000 BEMA 12-3
Hubungi
Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm
Grinding length: 1,000 mm
Centre height: 175 mm
Space requirement approx. 3.6/3.5 m
Photos show an identical machine with 225 mm centre height
Base Model:
Kellenberger Kel-Varia UR175-1000 Kelco 120
Grinding Head UR with T1-T2-T3
Standard Equipment:
- T1: 500 mm grinding wheel diameter
- T2: 400 mm grinding wheel diameter
- B-axis infinitely variable, high resolution
- Marposs measurement system for tool setting
- Active longitudinal positioning
- GAP control at T1 and T2 from ELASO, contactless integration in the control interface
- Semi-automatic balancing by ELASO integrated in the control interface
- Tailstock with manual retraction
- Workpiece spindle head MK5 with short taper mount DIN 55026
- Internal grinding attachment, belt-driven
Options at Additional Cost:
- New high-precision workpiece spindle head with torque drive
- Internal grinding attachment for high-frequency spindles, 120 mm diameter
- HF internal grinding spindle Fischer MFM-1224/42/31 D-21
- HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required)
- CNC-controlled C-axis
- Non-circular grinding
- Hydrostatic leadscrew in X
- New hydrostatic system with only one pump and accumulator for better energy efficiency
- Monitoring of water content in the hydrostatic system
- Extraction unit
Other options available on request
Mechanical Overhaul:
- Complete machine overhauled according to Kellenberger measuring protocol
- New, service-friendly enclosure
- New paintwork
Electrical Overhaul:
- New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface
- Rebuilt control cabinet
- New drive technology
- Replacement of all electrical wiring, Berus pressure switch, etc.
- New absolute glass scales in X and Z
- New absolute rotary encoder (for B-axis)
Control System:
The grinding software consists of a basic license and various options depending on the machine’s equipment.
Basic software
- External and internal oscillation grinding
- External and internal plunge grinding
- External and internal plane oscillation grinding
- External and internal plane plunge grinding
- External and internal cone oscillation grinding
- External and internal radius grinding, radius dressed on the wheel
- Semi-automatic oscillation grinding
- Workpiece zeroing
- Grinding wheel zeroing
- Measurement of dressing diamonds
- Two form diamonds
- One form diamond or dressing roll (dressing roll required)
- Form roll (dressing roll required)
- Three flat dressers
- Corrections
- Z-position measurement (probe required)
- GAP touch detection (touch dressing device required)
OPTIONS at additional cost:
Software for profile plunge grinding:
- External and internal profile plunge grinding with profile wheel
Profile grinding software:
Ncjdpfsuxfucox Aglel
- External and internal profile grinding with straight wheel
Thread grinding software:
- Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable.
Trapezoidal thread grinding software:
- Additional dressing of trapezoidal threads possible
External and internal non-circular plunge grinding:
- External and internal non-circular oscillation grinding
Non-circular grinding software:
Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis.
The non-circular...
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGERUR175-1000 BEMA STEP
Hubungi
Kondisi: bekas, Grinding diameter 350 mm
Grinding length 1000 mm
Centre height 175 mm
Grinding wheel diameter 400 mm
Grinding wheel width 50 mm
Bore 127 mm
Workpiece spindle taper MT5
Workpiece spindle speed 20–400 rpm
Workpiece headstock swivelling 360°
Grinding headstock swivelling 180° ±
Grinding spindle speeds 1500, 1700, 2200 rpm
Plunge feed: incremental 0–9.99 mm/Ø
Plunge feed: continuous 0–9.99 mm/Ø
Table swivelling ±8°
Longitudinal table travel 1100 mm
Table speed 0.02–6 m/min
Workpiece weight between centres 130 kg
Cross travel max. 270 mm
Workpiece weight max. (flying) 130 kg incl. clamping
Internal spindle mounting 80 mm
Tailstock quill mounting MT3
Quill travel 30 mm
Total power requirement 6.5 kW
Machine weight approx. 3.05 t
Space requirement approx. 4 x 2 m
Overhauled according to Kellenberger guidelines including new, modern and future-proof control system.
Photo shows a previously delivered machine.
-The touch panel operation is extremely user-friendly.
-The icons on the control panel are virtually identical to the original control, so no retraining is required.
-Diagnostic function with display of PLC messages and digital I/Os.
-Dressing function can be extended or modified to customer requirements.
-Workpiece spindle oriented stop available on request.
-New maximum infeed amount: 40 mm, extendable upon request.
-Digital display on 2 axes. X-axis resolution 0.5 µm.
Options:
-Encoder with digital display on the workpiece headstock
-Encoder with digital display on the grinding headstock (no height adjustment with spindle possible)
-New stable internal grinding attachment diameter 80 mm or 100 mm
Ncedpeuxfupofx Aglol
-Increase of centre height up to max. 225 mm
-Speed control for grinding spindle
Includes:
-Operating tools
-Clamping tube for chuck
Further accessories available upon request.
The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive.
Hydraulic longitudinal and rapid traverse table movement.
Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts.
Available options:
-Semi-automatic dressing cycles for external and internal grinding
-Automatic dressing compensation
-Measuring control
At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015.
The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGERKEL-Vista UR 175-1000
Hubungi
Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm
Grinding length: 1000 mm
Center height: 175 mm
Machine weight approx. 3.5 t
Machine completely overhauled in BEMA style with 12 months warranty
Mechanically and visually as new
Nedpjt Ii Nbsfx Agljcl
Photo shows a recently completed machine with partially different options.
Fanuc 21i control system
- Grinding head UR 1-2-3 External/Internal/Face grinding
- B-axis automatic, 1° Hirth gearing
- Active longitudinal positioning KEL-POS Movomatic
- Semi-automatic balancing system KEL-BALANCE
- Left grinding wheel mount: 400 mm diameter
- Right grinding wheel mount: 300 mm diameter
- Internal grinding attachment with belt drive
- Tailstock with micro adjustment
- Fine adjustment upper slide
- Paper band filter SBP4 240 l
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - universal
KELLENBERGER1000U BEMA Advance
Hubungi
Kondisi: bekas, Grinding diameter: 250, 350, 450 mm
Grinding length: 1000 mm
Center height: 125, 175, 225 mm
Grinding wheel diameter: 400 mm
Grinding wheel width: 50 mm
Bore: 127 mm
Workpiece spindle taper: MK5
Workpiece spindle speed: 20–400 rpm
Swiveling workpiece headstock: 360°
Swiveling grinding headstock: ±180°
Grinding spindle speed: 1500, 1700, 2200 rpm
Nodpfx Ajt Ii Nusglocl
Incremental infeed (per stroke): 0.001–0.030 mm/Ø
Continuous infeed: 0–0.95 mm/Ø
Table swiveling range: ±8°
Table longitudinal travel: 1300 mm
Table speed: 0.02–6 m/min
Workpiece weight between centers: 130 kg
Workpiece weight max.—mounted: 130 kg incl. clamping
Internal spindle mount: 70 mm
Total power requirement: 6.5 kW
Machine weight (approx.): 2.5 t
Space requirement (approx.): 4.2 x 2.0 m
As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment.
Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered.
- Digital display on 2 axes. Resolution of X-axis: 0.5 μm
Options:
- Encoder with digital display on workpiece spindle headstock
- Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle)
- New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment
- Increase in center height up to max. 225 mm
- Speed control for the grinding spindle
Included:
- Operating tools
- Clamping tube for chuck
Additional accessories available on request.
At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.
Iklan kecil
Kirchheim unter Teck
11.143 km
Mesin penggiling silinder - di luar
KELLENBERGERKel-Varia R175-1500
Hubungi
Kondisi: bekas, Grinding diameter 350 mm
Grinding length 1500 mm
Njdpot Ii Rfefx Aglocl
Centre height 175 mm
Left grinding wheel 600 mm
Grinding spindle headstock fixed, not swivelling.
Equipped with new FAGOR control system and BEMA cylindrical grinding interface.
Fitted with a new, maintenance-friendly enclosure.
Completely overhauled according to Kellenberger inspection protocol.
Iklan kecil
Kirchheim unter Teck
11.143 km
Silinder grinding machine
KELLENBERGERR125-600
Hubungi
Kondisi: bekas, Grinding diameter: 250 mm
Grinding length: 600 mm
Centre height: 125 mm
Grinding wheel diameter: 500 mm
Grinding wheel width: 80 (100) mm
Bore: 203.2 mm
Workpiece spindle taper: MK5
Workpiece spindle speed: 20–400 rpm
Workhead swiveling: +/- 360°
Grinding head swiveling: +/- 0°
Infeed (incremental): 0–9.99 mm/Ø
Infeed (continuous): 0–9.99 mm/Ø
Table swiveling: +/- 10°
Table longitudinal travel: 700 mm
Table speed: 0.02–6 m/min
Workpiece weight between centers: 130 kg
Max. workpiece weight – between centers: 130 kg including clamping
Cross travel: 270 mm
Tailstock quill taper: MK3
Quill travel: 30 mm
Total connected load: 5.5–7.5 kW
Machine weight approx.: 2.7 t
As a world-leading company in the area of Kellenberger – overhaul/retrofit, we are not only able to deliver the machines in as-new quality and with warranty, but can also offer you full service for your machines.
Overhauled to Kellenberger standards, including new, modern, and future-proof controls.
Image shows a previously delivered machine.
- Operation via touch panel is extremely simple.
- The symbolism on the control panel is virtually identical to the original system, so no retraining is necessary.
- Diagnostic function with display of PLC messages and the digital I/O
- Dressing functions can be expanded or modified as per customer requirements.
- Oriented spindle stop for the workpiece spindle available upon request.
- New maximum infeed amount 40 mm, can be extended upon request.
- Digital readout in 2 axes. X-axis resolution: 0.5 µm
Options:
- Encoder with digital readout in the workhead
- Encoder with digital readout in the grinding head (no vertical adjustment with spindle possible)
- New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment.
- Increased centre height up to max. 225 mm
- Speed control for grinding spindle
Nsdpfxsd Ih Ehs Aglocl
Included:
- New DGS paper band filter
- Operating tools
- Chuck tube for chuck
Other accessories available on request.
The machine is equipped on the X-axis with an electronically controlled infeed system with stepper motor drive.
Hydraulic table longitudinal movement and rapid traverse.
Versatile application in production for external and internal cylindrical grinding, or for simultaneous OD, face, and ID grinding in a single setup for individual parts.
Possible options:
- Semi-automatic dressing cycles for external and internal grinding
- Automatic dressing compensation
- Gauging/measurement control
Currently, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in the BetrSichV 2015.
Achieving the required minimum level of protection must be determined through a risk assessment in accordance with the BetrSichV.
Iklan kecil
Kirchheim
11.145 km
Mesin penggiling silinder - universal
KELLENBERGER600U
Hubungi
Kondisi: bekas, Tahun pembuatan: 1986, Grinding diameter 350 mm
Grinding length 600 mm
Centre height 175 mm
Very well-maintained machine.
The machine comes from a precision grinding workshop in the Black Forest.
Machine can still be inspected under power at the seller’s premises for a short period.
In 2022, the machine underwent partial overhaul and maintenance at our facility, including restoration of geometry according to the manufacturer’s protocol.
Equipment:
- 2-axis FAGOR digital readout
- Sine bar
- Tailstock with fine adjustment
- Hydraulic tailstock
- Surface grinding attachment
- Internal grinding unit
- Fischer UJ70 internal grinding spindle
Ncjdsv Tqqnepfx Aglsl
- Paper band filter
- Automatic cycle: Rough grinding – Finish grinding – Spark-out – Return
Iklan kecil
Jerman
11.023 km
Mesin penggiling silinder
KellenbergerS11
Hubungi
Kondisi: siap digunakan (bekas), An older Kellenberger precision cylindrical grinding machine including accessories is available. Centre distance: 200 mm, centre height: 125 mm, maximum workpiece weight: 3 kg, maximum workpiece diameter: 245 mm, maximum workpiece length: 130 mm. On-site inspection is possible.
Ncodpfx Agjw Edpgolel
Iklan kecil
Dürnten
11.216 km
Mesin penggiling silinder
KellenbergerKEL-VARIA
Hubungi
Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 600 mm, diameter penggilingan: 250 mm, Mesin masih beroperasi hingga baru-baru ini.
Diameter penggerindaan: 250mm
Panjang penggerindaan: 600mm
Catatan:
- Harga TIDAK termasuk aksesori!
Ncodpfx Agowca Hcjlol
- Pengambilan oleh pembeli, dari lokasi.
- Jadwal pengambilan akan disepakati dengan penjual.
- Tanpa garansi
- Pembayaran di muka (faktur) atau tunai saat pengambilan
Iklan kecil
Hilden
11.263 km
Mesin gerinda silinder presisi
KELLENBERGERKelVaria UR 175 x 1.000
Hubungi
Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), On behalf of a client from Switzerland, I am offering this machine for sale.
It has 5,200 operating hours and is in excellent condition.
Used in prototype manufacturing, currently fully operational.
Equipped with:
- UR grinding head
- T1 500 x 80; T2 400 x 63
- 1 high-frequency internal spindle MFM 1224/42
- 1 high-frequency internal spindle MFM 1290
- Semi-automatic balancing device
- KEL-TOUCH on the workpiece spindle for internal and external grinding
- KELSET grinding wheel measurement
- KELPOS longitudinal positioning
- Heidenhain CNC GrindPlus 640
- CNC B-axis, hydrostatic
- CNC C-axis for polygon and thread grinding
- KELSOFT NCG for non-circular grinding
- KELTHREAD for thread grinding
- KELREMOTE for remote diagnostics
- Prepared for measuring controls
- Streuli paper belt filter 480 l
Nsdpfsgtingex Aglscl
- Extraction unit
Available at short notice from location Switzerland.
Iklan kecil
Hilden
11.263 km
Mesin penggiling silinder
KellenbergerK 10
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat pada poros engkol: 200 mm, tinggi pusat: 200 mm, berat benda kerja (maks.): 100 kg, panjang penggilingan: 1.000 mm, berat benda kerja di antara senter: 100 g, diameter benda kerja antara pusat: 400 mm, I am offering this machine on behalf of a customer in nearly mint condition.
Currently still powered on.
It is equipped with the following options:
Glass scales in X and Z axes
Electric door drive
Integrated wheel change assistance
Fanuc 0i TF
Blue Solution HMI
Back Solution Basic
Nedpsw Ed D Rsfx Aglecl
Black CAM Profile
Security Interface
Remote diagnostics via mobile network (4G)
Grinding head with automatic 1-degree indexing
Grinding head UR 1 - 2 - 3 (prepared for HF internal grinding spindle)
T1 500; T2 400 mm
3-jaw steady rest
Active longitudinal positioning at the head
Semi-automatic balancing
GAP control
A brochure for the K 10 can be provided upon request.
Iklan kecil
Contamine-sur-Arve
11.428 km
Mesin penggiling silinder
KELLENBERGER1000 U
Hubungi
Kondisi: bekas, en-001
Njdpjuhbx Tofx Agljcl
Iklan kecil
Fuente de Cantos
12.670 km
Mesin penggiling silinder
KELLENBERGERRS 125/430
Hubungi
Kondisi: baik (bekas), Distance between centers: 760 mm
Maximum Z-axis travel: 650 mm
Maximum grinding length: 430 mm
Maximum grinding diameter: 250 mm
Center height: 125 mm
Maximum wheel diameter: 500 mm
Ncodpfsv Tmtlsx Aglsl
Maximum X-axis travel: 320 mm
CNC brand: FANUC
CNC model: 18TB
Main motor power: 7.5 kW
Z and X-axis resolution: 0.1 µm
Workhead taper: MORSE 5
Workhead through-hole diameter: 38 mm
Tailstock taper: MORSE 4
Workhead spindle speed: from 8 to 800 rpm
Dimensions (L x W): 2500 x 2000 mm
Weight: 4700 kg
Iklan kecil
Swiss
11.271 km
MESIN PENGGILING INTERNAL
HAUSERKELLENBERGER H55-400
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, Unit Kontrol
Merek: FANUC
Model: §==I
Penggerak Utama
Nodpox D Ny Ssfx Aglecl
Jumlah sumbu: 5
Meja
Jumlah celah-T: 7
Lebar dalam: 14 mm
Beban meja: 800 kg
HAUSER KELLENBERGER H55-400 5-sumbu ini diproduksi tahun 2019, dirancang untuk penggerindaan internal presisi. Ideal untuk geometri kompleks, menawarkan kontrol canggih untuk akurasi tinggi. Pertimbangkan kesempatan membeli mesin gerinda internal HAUSER KELLENBERGER H55-400 ini. Hubungi kami untuk informasi lebih lanjut.
Jenis Aplikasi
Penggerindaan
Iklan kecil
Saint-Genix-les-Villages
11.494 km
CNC jig grinding machine HAUSER S40-400
HAUSERS40-400
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 650 mm, jarak gerak sumbu Z: 130 mm, tinggi total: 2.750 mm, kecepatan pemakanan sumbu X: 1 m/menit, laju pemakanan gandar Y: 1 m/menit, laju pemakanan sumbu Z: 12 m/menit, lebar meja: 630 mm, panjang meja: 770 mm, jarak meja ke pusat spindel: 585 mm, jenis arus masuk: tiga fasa, beban meja: 500 kg, berat keseluruhan: 4.500 kg, jarak perjalanan sumbu W: 500 mm, jarak antara penyangga: 750 mm, Perlengkapan: dokumentasi / manual, DE-CNC KOORDINATENSCHLEIFMASCHINE HAUSER S40-400
TECHNISCHE DATEN:
Verfahrweg X-Achse: 650 mm
Max. Eilgang X-Achse: 4.000 mm/min
Arbeitsvorschub X-Achse: 0 - 1.800 mm/min
Verfahrweg Y-Achse: 450 mm
Arbeitsvorschub Y-Achse: 0 - 1.800 mm/min
Verfahrweg Z-Achse: 130 mm
Min. Verfahrgeschwindigkeit Z-Achse: 0,5 mm/min
Max. Verfahrgeschwindigkeit Z-Achse: 12.000 mm/min
Hubfrequenz Z-Achse: max. 4 Hz
Hub W-Achse: 500 mm
Planetengetriebe-Drehzahl C-Achse: 5 - 250 U/min
Max. Eilgang W-Achse: 800 mm/min
Hub U-Achse (radialer Vorschub): 5,5 mm
Abstand zwischen den Ständern: 750 mm
Tischlänge: 770 mm
Tischbreite: 630 mm
Abstand zwischen Schleifspindel und Tisch: 585 mm
Max. Tischbelastung: 500 kg
Versorgungsspannung: 400 V
Gewicht: 4.550 kg
ZUSATZAUSSTATTUNG:
1x HI-CUT Paket bestehend aus:
- Arbeitsraum-Schutz
- Absauganlage mit elektrostatischem Luftfilter
- Brandschutzsystem (muss durch eine Fachstelle bewertet werden)
- HTG-RWS-60 automatische Bandfilter-Kühlanlage
1x MSS (Multi-Sensorik-System) Werkzeugerkennungseinheit
1x CBN Abrichteinheit mit HF-Antrieb zur automatischen Abrichtung von CBN-Schleifscheiben (Keramik- und Kunstharzbindung)
1x T16 Schleifturbine - Drehzahl: 160.000 U/min - Referenz: 164225
1x Turbinenhalter mit Filter für Verwendung mit T10 und T16 Turbinen - Referenz: 166497
1x 60S-TC Schleifmotor, Drehzahl 9.000 – 60.000 U/min, für SK20-Spannzangen – Artikelnummer: 208450
1x Zwischenplatte zum Ausrichten von Motoren und Turbinen - Referenz: 192940
1x Halter für Zentrieruhr zur Ausrichtung des Schleifmotorrotors - Referenz: 191790
15x Scheibenträger-Spannpratzen
1x Kabel für Schleifmotor
Verschiedene Werkzeuge
Vollständige Dokumentation
Die Maschine kann nach Terminabsprache unter Strom besichtigt werden.
Preis auf Anfrage, Verladung auf LKW inklusive.
Weltweiter Versand möglich.
Alle Angaben nach bestem Wissen – Irrtümer und Zwischenverkauf vorbehalten.
Die HAUSER S40-400 ist eine hochpräzise CNC-Koordinatenschleifmaschine. Sie eignet sich besonders für Anwendungen mit engen Toleranzen, wie sie beispielsweise in der Luft- und Raumfahrt-, Automobil- und Medizintechnik vorkommen. Dank der robusten Bauweise und der fortschrittlichen Technik steht die HAUSER S40-400 in direktem Vergleich zu Maschinen namhafter Hersteller wie Moore. Die Integration in Werkstätten mit Maschinen von Mägerle, Studer, Moore, Kellenberger, Okamoto, Jones & Shipman und ELB ist problemlos möglich.
Nodpfx Asya Dz Rsglecl
Neben der Leistungsfähigkeit lässt sich die HAUSER S40-400 ideal in Werkstätten mit Drehmaschinen, Bearbeitungszentren oder CNC-Fräsmaschinen integrieren und bietet eine Komplettlösung für das hochpräzise Schleifen und die Bearbeitung komplexer Werkstücke.
Iklan kecil
Saint-Genix-les-Villages
11.494 km
CNC Jig grinder - HAUSER S40-400
HAUSERS40-400
Hubungi
Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 650 mm, jarak gerak sumbu Z: 130 mm, kecepatan pemakanan sumbu X: 1 m/menit, laju pemakanan gandar Y: 1 m/menit, laju pemakanan sumbu Z: 12 m/menit, panjang meja: 770 mm, jarak meja ke pusat spindel: 585 mm, jenis arus masuk: tiga fasa, beban meja: 500 kg, berat keseluruhan: 4.550 kg, jarak perjalanan sumbu W: 500 mm, jarak antara penyangga: 750 mm, jarak antara tiang: 750 mm, Perlengkapan: dokumentasi / manual, de-1001
Nsdpfoya Az Nex Aglecl
Iklan kecil
Heroldstatt
11.131 km
Mesin penggiling silinder
Karstens GeneralüberholtK19 CNC 650
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Centre height: 181 mm
Centres distance: 650 mm
Maximum grindable workpiece diameter: 360 mm
Max. cantilevered load: 1000 N / 100 kg
Max. load between centres: 3000 N / 300 kg
Z-axis
Table swivel angle: 10°
Table drive, hydraulic: 0-4 m/min
X-axis
Adjustment travel of infeed spindle: 80 mm
Rapid traverse (hydraulic): 50 mm
Coarse adjustment (air cushion): 280 mm
Infeed drive: via DC motor
Rapid infeed speed: 48 mm/min/Ø
Infeed cycle: Plunge / longitudinal grinding
4 preselectable infeed speeds: mm/min/Ø 0.01-48
4 preselectable infeed amounts: mm 0.001-0.1
Spark-out during stop grinding: s 0-99 / 0-99 strokes
Tip infeed: mm/Ø 0.001
Grinding spindle head: Universal, swivelling: 0-180°
Grinding wheel (external): D x W x d mm 500x100x127 or 203.2
Nodstqf Sqepfx Aglecl
Grinding wheel (face, option): D mm 250x32x76.2
Grinding wheel (internal, option): D mm (2-250)
Drive power external, face: kW 5.5 (7.5)
Drive power internal: kW 2.2
Peripheral speed external: m/s 35 (50)
Grinding wheel wear external: mm/Ø 160
Wheel guard width: mm 100
Grinding spindle diameter: mm 60
Internal spindle mounting: mm 80 (100)
Workpiece spindle head:
Infinitely variable drive: Mk 4 1/min 30-270 / 50-450
Workpiece spindle: lockable
Spindle mounting: mm MK 4/24
Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6
Workpiece headstock swivellable on rotary part: 0-90°
Tailstock:
Quill mounting/quill diameter: mm MK4 / 50
Quill stroke: mm 45
Quill force: N 100-800 / 250-1400 adjustable
Quill operation: manual (foot switch)
Quill fine adjustment: ±40µ
Connections:
Total power consumption: kW 6.5 - 10
Grinding spindle head: kW 5.5 (7.5)
Workpiece spindle head: kW 0.55 (1.1)
Coolant filtration: kW 0.75 - 2.2
Lubrication pump for guideways: kW 0.1
Hydraulic pump: kW 1.5
Hydraulic tank: L 80
Pneumatics: bar 6
Comparable to Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna
Iklan kecil
Heroldstatt
11.131 km
Mesin penggiling silinder
Karstens Premium RetrofitK11 1000
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine
Make: Karstens
Technical Specifications:
Centre distance: 1100 mm
Centre height: 180 mm / (250 mm optional)
Workpiece weight: 100 kg between centers, 300 kg between centers
Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel)
Workpiece spindle: MT 4, infinitely variable speed control 30–450 rpm, swivel range 0–90°
Tailstock: MT 4, quill stroke 45 mm
Quill force: 200–600 N manual (up to 2500 N possible, adjustable as option)
Table swivel: 10 degrees
Feed spindle adjustment travel: 80 mm
Rapid traverse: 50 mm
Coarse positioning via air cushion: 280 mm
External grinding spindle motor: 4 kW (5.5 kW optional)
Infinitely variable speed adjustment of the grinding wheel by potentiometer
Internal grinding spindle motor: 2.2 kW
Workpiece spindle motor: 1.1 kW
Hydraulic motor: 1.5 kW
Lubrication motor: 0.1 kW
Hydraulic tank: 80 litres
Net machine weight: 3800 kg
Infeed drive by DC motor
Air-cushioned rapid adjustment of the grinding spindle head for fast and safe approach to grinding position.
Separate drive for spindles for external and internal grinding.
Fully automatic operating sequence, infeed movement controlled via rotary switch: rapid approach, rapid return, grinding operation, infeed stop, mym-infeed.
Automatic longitudinal grinding cycle
Central coolant supply to all grinding points
Workpiece spindle head with infinitely variable drive in both rotating and lockable spindle states.
Nedpfx Aoiv Au Eoglscl
New digital infeed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding, with input for retraction, infeed amounts, feed rates, dwell times, empty strokes, compatible with the old Karstens infeed control, with a coloured Siemens touch panel, scale on X and Z axes by HEIDENHAIN.
Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna
Kami memudahkan pencarian untuk Anda: "kellenberg"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Kellenberg (109)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan












































































































































































































































