Beli Kolom Mesin Bor bekas (79.379)

Kondisi: bekas, Tahun pembuatan: 1996, de-hu-it-lt-001 Kledpfx Aaovuufxj Nel

Kondisi: bekas, Tahun pembuatan: 1982, Pressing force: 350 t Column gap: 1350 mm Stroke: 900 mm Distance table/ram, large stroke up, upper dead center adjustment: 1300 mm Table area: 1300 x 1000 mm Cushion pressure in table: 100 t Cushion stroke in table: 380 mm Cushion area: 350 x 285 mm Ejector force in ram: 25 t Kodpovuk Iiofx Aa Nell Ejector stroke in ram: 200 mm Table height above floor: 750 mm Ram area: 1300 x 1000 mm Approach speed: from 500 mm/s Return speed: 160 - 470 mm/s Working speed: 16 - 44 mm/s Drawing speed: 57 - 160 mm/s Retraction force: 32 t Oil capacity: 1700 l Drive power: 91.0 kW Required floor space (W x D x H): 3.75 x 2.8 x 7.2 m Height above floor: 5.28 m Approved for manual loading operations according to German accident prevention regulations (UVV) With electrohydraulic drive, light curtain (Sick), pressure/time and stroke-dependent control, hydraulic cushion in table (adjustable), hydraulic ejector in ram, top dead center ram locking, variable speed control, two-hand operation Partially dismantled and in storage - can be offered as is without commissioning, with commissioning in the current condition, or alternatively with new Siemens S7-1500 F control

Kondisi: bekas, Tahun pembuatan: 1993, Press force 315 t Upright distance 2060 mm Stroke 700 mm Distance table/ram, stroke at top 1100 mm Table surface 2000 x 1000 mm Cushion force in table 125 t Cushion stroke in table 200 mm Cushion area 1200 x 600 mm Table height above floor 750 mm Table height above floor (when installed at ground level) 1100 mm Klodpfsvuudzox Aa Nol Lateral upright passage 720 mm Ram area 2000 x 1000 mm Oil capacity 1800 l Drive power 90.0 kW Weight 35.0 t Space requirement (WxDxH) 3.6 x 2.75 x 5.65 m Approved for manual feeding work according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in the table, cutting shock absorber (with motorized depth adjustment) no foundation pit required can be offered either without commissioning (WITHOUT screen / operator console) or alternatively with new Siemens S7-1500 F control system, including new operator console and interface

Kondisi: bekas, Tahun pembuatan: 1995, de-to-hu Kjdpfx Aajwc U I Uj Nell

Kondisi: bekas, Tahun pembuatan: 1992, Pressing force: 6.3 t Stroke: 305 mm Throat depth: 250 mm Installation height: 850 mm Table surface: 470 x 450 mm Table height above floor: 800 mm Ram area: 40 mm Downward speed: from 120 mm/s Upward speed: 510 mm/s Working speed: 21 mm/s Oil capacity: 175 l Drive power: 2.2 kW Weight: 1.5 t Required space approx. 1.0 x 1.55 x 2.6 m (LxWxH) Approved for manual loading operations as per German accident prevention regulations (UVV) Kedpfx Ajv Svbcsa Noll Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, two-hand operation.

Kondisi: bekas, Tahun pembuatan: 1977, 649467698 Kodpfovuk Trjx Aa Nell

Kondisi: bekas, Tahun pembuatan: 1996, druck-100t-ausladung-510mm Kjdpfx Ajvuunmea Nell

Kondisi: bekas, Tahun pembuatan: 2007, 3215-1 Kedpfx Aaevuukbo Njll

Kondisi: bekas, Tahun pembuatan: 1989, Pressure: 100 t Clearance between uprights: 1,060 mm Stroke: 700 mm Distance table/ram, max stroke up, adjustment up: 1,250 mm Table area: 1,000 x 700 mm Drawing cushion pressure in table: 40 t Drawing cushion stroke in table: 200 mm Drawing cushion area: Ø 250 mm Table height above floor: 950 mm Lateral upright passage: 580 x 750 mm Kjdpfx Ajvuk Nasa Nell Ram area: 1,000 x 700 mm Oil capacity: 700 l Drive power: 47.0 kW Weight: 13.0 t Space required (WxDxH): 2.2 x 1.8 x 5.0 m Approved for manual loading/unloading according to German accident prevention regulations (UVV). Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motorized adjustable), ram locking device (SITEMA). Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 2010, de-to-hu Kjdpfsvuubmex Aa Noll

Kondisi: bekas, Tahun pembuatan: 1991, copy1 Kjdpevuuacefx Aa Nsll

Kondisi: bekas, Tahun pembuatan: 1980, Pressing force 250 t Column gap 2000 mm Stroke 600 mm Distance table/ram, stroke up 1000 mm Table surface 1700 x 1300 mm Table height above floor level 800 mm Die cushion force in table 100 t Die cushion stroke in table 180 mm Die cushion surface in table 1650 x 700 mm Kledpfsvut Tnox Aa Njl Side frame opening 1000 mm Ram surface 1700 x 1400 mm Weight 31.1 t Space requirement (WxDxH) 3.3 x 1.9 x 4.85 m Height above floor 4.55 m Approved for manual loading according to German accident prevention regulations (UVV) with electrohydraulic drive, hydraulic die cushion in table, hydraulic shock absorption no pit required Can be offered without commissioning, with commissioning in as-is condition, or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1990, de-HU-01 Klodevut Tbjpfx Aa Njl

Kondisi: bekas, Tahun pembuatan: 2004, en_VErnGNwKJDgr1wSjQd5yMZ Kledsv Svarjpfx Aa Nel

Kondisi: baru, Data teknis: Jumlah spindle: 42 (21 + 21) Jarak antar spindle: 32 mm Lebar total spindle di kepala: 640 mm Tinggi meja kerja: 860 mm Dimensi meja kerja: 885 x 349,5 mm Motor: 2 x 1,5 kW/2HP Kecepatan motor: 2800 rpm Tekanan kerja: 6/8 bar Konsumsi udara: 10 liter per siklus Klsdpjya Dfvjfx Aa Nol Diameter pipa ekstraksi: 80 mm Daya listrik: 380 V Dimensi keseluruhan: Lebar: 1070 mm Kedalaman: 1035 mm Tinggi: 1505 mm Berat bersih: 366 kg

Kondisi: bekas, Tahun pembuatan: 2018, 20805 Klsdpfx Aswvzrmea Njl

Kondisi: sangat baik (bekas), Blum Minipress hinge drilling machine Number of drill bits: 5 Bit mounting via quick-release couplings Motor power: 0.75 kW Pneumatic clamping, pneumatic unit stroke Maximum workpiece thickness: 40 mm Klodouz Tc Hspfx Aa Nol

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Heidenhain, model controller: iTNC 530, tinggi total: 2.800 mm, panjang total: 7.000 mm, lebar total: 4.000 mm, lebar meja: 635 mm, berat keseluruhan: 11.500 kg, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 10.000 rpm, jumlah spindel: 1, jumlah slot dalam magazin alat: 36, panjang alat: 340 mm, diameter alat: 70 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Kontrol: Heidenhain iTNC 530 Perjalanan X [mm]: 2.000 Perjalanan Y [mm]: 600 Perjalanan Z [mm]: 800 Dimensi pemasangan PxLxT (mm): sekitar 7.500 x 4.500 x 3.100 mm Berat (kg): sekitar 11.000 Spindel: Kecepatan maksimum: 10.000 rpm Daya penggerak maksimum: 16 kW pada 40% ED Torsi maksimum: 80 Nm pada 40% ED Tipe holder alat: SK40 Kepala putar CNC: Rentang ayun: +/- 105° Dapat dipilih antara mode kontinu atau dengan pengaturan dan penguncian Umum: Sistem pengukuran linier langsung pada sumbu X/Z/Y Majalah alat dengan 36 posisi Koneksi listrik: 400V/3Ph/50Hz Daya koneksi sekitar 55 kW Kedpfxox Tg Sto Aa Nsll Koneksi udara tekan: 6-8 bar Perlengkapan / Aksesori: Meja putar sesuai gambar Handwheel elektronik Konveyor serbuk

Kondisi: bekas, Tahun pembuatan: 2005, de-to-hu-it-lt-01 Kledpfevuuiksx Aa Nsl

Kondisi: bekas, Tahun pembuatan: 2005, 1 Ksdovuuh Tepfx Aa Noll

Kondisi: bekas, Tahun pembuatan: 1998, Tekanan 800 t Kledpfxjvuuhgs Aa Nol Jarak kolom 3550 mm Langkah 1100 mm Jarak meja/pelatuk, langkah besar atas, setel atas 1900 mm Luas meja 3500 x 1800 mm Tekanan bantal tarik di meja 350 t Langkah bantal tarik di meja 280 mm Tekanan bantal tarik di pelatuk 80 t Langkah bantal tarik di pelatuk 160 mm Luas pelatuk 3500 x 1800 mm Bukaan samping kolom 1900 mm Berat 100,0 t Kebutuhan ruang (P x L) 5,3 x 4,3 m Tinggi di atas lantai 7,3 m Tinggi di bawah lantai 5,0 - 6,0 m Tahun pembuatan 1970 - Overhaul 1998 Dengan penggerak oli hidraulik, bantal tarik hidraulik yang dikendalikan di meja dan pelatuk, peredam benturan geser hidraulik, meja geser (tanpa rel untuk meja jalan) Tinggi di bawah lantai sekitar 5 - 6 m Dibongkar dan disimpan - Video tersedia dari pemilik sebelum pembongkaran

Kondisi: bekas, Tahun pembuatan: 1989, Silakan hubungi ATS Norway untuk informasi lebih lanjut. Mohon cantumkan nomor referensi saat mengajukan pertanyaan: 21250 Spesifikasi: Tahun pembuatan: 1989 Jam kerja: 5520 Palu berfungsi Butuh aki baru Winch dan vacuum berfungsi menurut pemilik Siap untuk pengiriman. Ksdpjw Ucm Uofx Aa Nell Bobot kosong: Jam mesin: 5520 Model: 712HC-01

Kondisi: bekas, Tahun pembuatan: 2019, Seriennummer: 5xxxx Wenden Sie sich an ATS Norway, um weitere Informationen zu erhalten. Bitte geben Sie die Referenznummer auf Anfrage: 21113 Spezifikationen: Baujahr 2019 Schlagstunden: 3550 (können leicht steigen) Kompressorstunden: 5538 (können leicht steigen) Motorstunden: ca. 8300 (können leicht steigen) Seilwinde Gestängemagazin Water Mist-System Karussell Volvo-Motor Fahrwerk (siehe Bilder) Fernbedienung CME Schleifgerät L5 GPS Kürzlich gewartet Hammer good. Arbeitsbeleuchtung Gewindeschmierung Ksdew Rag Dspfx Aa Noll Radio Klimaanlage Sofort lieferbar Beschreibung: Zum Verkauf steht eine Sandvik DX800i Bohrlafette mit L5 GPS.Laut Eigentümer ist alles funktionsfähig, und die Maschine wurde kürzlich gewartet.Sofort lieferbar.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Number of independent vertical spindles: 8 Number of horizontal spindles, X axis: (2+2) Number of horizontal spindles, Y axis: (1+1) No. 1 blade for groove execution on the back of the cabinet: (ø 100 mm) Max. panel thickness: 50 mm Control: Full Parametric Max. panel weight: 25 kg Max. panel dimensions (see layout): X: , Y: 920, Z: 50 mm Min. panel dimensions: X: 270, Y: 150 (70 option), Z: 12 mm Number of controlled axes: 3 Panel feed speed: 25 m/min Spindle rotation: 3600 rpm Operating pressure: 7 bar Extraction port diameter: ø 120 mm Extraction capacity: (2000 m³/h) - (30 m/s) Max. depth of all horizontal drillings in X and Y: 30 mm Max. vertical drilling depth: 45 mm Max. horizontal drill bit diameter: 12 mm Klsdpfxjuxmvze Aa Nsl Max. vertical drill bit diameter: 35 mm Motor: 1.5 kW Dimensions: 2200x1350x1550 mm Weight: 715 kg CE standards

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3L with 3-axis digital readout K&C NEW, in very good condition Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0924 >> Fixed angle table (clamping surface 1000 mm x 440 mm) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Feed rate from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 kW >> Travel X/Y/Z: 800/300/400 mm (Y travel can be shifted by an additional 200 mm) >> Equipment: vertical and horizontal spindle >> Extendable vertical and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 1900 kg Klsdpfxevn N Hde Aa Nsl Accessories and features: >> 3-axis digital readout K&C, newly installed with manufacturer warranty and operating manual. Display unit: Setting reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole pattern, radius milling functions, etc. >> Mechanical centralized lubrication >> Operating manual >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: Offered here is a Deckel FP3L universal milling machine in very good condition. The vertical head can be shifted by 200 mm to allow an even larger working area. A central pump ensures lubrication of the various axes. A particular feature of this machine type is its basic design, as it is equipped with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. This guarantees very high accuracy, as different workpiece weights do not affect axis movements. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the machine on site under power.