Beli Melihat Gelendong Moulder bekas (2.208)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Cross-cut circular saw with 2 x double shafts. Vertical and horizontal. For cutting battens, strips, laths, and separation cuts. With narrow kerf. Max. cutting height: 200 mm. Max. cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed rate with frequency control from 0 - 40 m/min. 8 pairs of driven rollers. Pneumatic, adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with control system. Saw bushings and tools included. Sound-insulated operator cabin. The machine is in very good condition and was only used occasionally. There is no visible wear on the feed rollers. Not in operation for the past 12 years. Mechanisation: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated cross discharge conveyor. With adjustable feed gearbox. The mechanisation is older. Electrical control cabinet with control system. Multi-blade saw Gubisch Grimme Cross-cut multi-rip saw Multi-blade saw for lamellas Circular saw for cross-cutting with 2 double shafts. Vertical and horizontal. For cutting battens, strips, laths, separation cuts. With narrow cutting line. Max cutting height: 200 mm. Max cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed rate frequency-controlled from 0 - 40 m/min. 8 pairs of driven rollers. Pneumatic, adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electric control cabinet. Saw bushings and tools included. Sound-insulated cabin. Gjdpex Ap Dzjfx Adtobg The machine is very well maintained and was only used sporadically. No visible wear on the feed rollers. Not used for 12 years. Mechanisation: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated cross scraper conveyor. With adjustable feed gearbox. Mechanisation is older. Electric control cabinet with control system.

Kondisi: bekas, Tahun pembuatan: 2000, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Infeed table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planing and Profiling Machine Unimat 23 E 6 spindles (including 2 on the right), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 125–180 mm Rabbet facility incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle right 11.0 kW ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left Godpfxjwqr Rvo Adtebg ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left spindle, incl. side pressure roller, spring-loaded 4th spindle right 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Segmented pressure shoe before top spindle, adjustable to tool diameter and can be swung clear of tool, spring-loaded. 6th spindle bottom 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles general ----- All profiling spindles feature high concentricity. Lubrication points for axial spindle adjustment. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Steplessly adjustable mechanical feed 6–36 m/min. Infeed roller before 1st bottom tool pneumatically controlled (high/low) Durofer pointed tooth rollers (Weinig patented) with depth limiter and self-cleaning Axial adjustment of feed rollers in relation to the left spindle: 35 mm Extension of the floating axis in relation to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz. Machine frame, tables and fences ----- Infeed table 2.5 m long (incl. jointer bar) Aluminum table extension 0.5 m for infeed table, incl. jointer bar extension Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically actuated Top pressure rollers can be swung away opposite right spindles for easy tool change Machine operation ----- Pressure shoe before top spindle with mechanical digital readout Discharge after top spindle with mechanical digital readout ATS/E system, automatic 2-axis positioning for spindle No. 3 and 4 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points at machine front Safety and sound...

Kondisi: bekas, Tahun pembuatan: 1990, Weinig Profimat 22N Gbsdox Dbbnepfx Adtsg Tahun pembuatan: 1990 Jumlah spindle: 6 buah Lebar penyerutan: 220 mm Tinggi penyerutan: 120 mm Diameter spindle: 40 mm Panjang meja masuk: 2.000 mm Penggerak: Kardus Urutan spindle: Bawah Kanan Kiri Atas Bawah Universal

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Leadermac Speedmac 631 Lebar kerja: 310 mm, tinggi: 150 mm. Spindel: 6 x 50mm (4x spindel dengan kontrol kecepatan inverter) Bawah (22 kW) – 6000 rpm, bantalan luar Kanan (15 kW) – (4000 sampai 9000 rpm) jointer lurus Kiri (15 kW) – (4000 sampai 9000 rpm) jointer lurus Atas (22 kW) – 6000 rpm, bantalan luar Atas (22 kW) – (4000 sampai 9000 rpm), bantalan luar, jointer lurus Bawah (22 kW) – (4000 sampai 9000 rpm), bantalan luar, jointer lurus Gsdoxzthbjpfx Adtobg Kecepatan pengumpanan 60 m/menit (dapat ditingkatkan). Roller pengumpan atas 200 mm (2 pertama) dan lainnya 140 mm Koneksi: 380 V // 50 Hz Dokumentasi lengkap disertakan.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H_511869, masa garansi: 6 bulan, tahun perombakan terakhir: 2025, Mesin Penggulung WP Haton BM51 B Spesifikasi teknis: Efek penggulungan ideal berkat prinsip kerja drum Rentang bobot: 110 – 1600 g Kapasitas: < 2000 pcs/jam Hopper dengan dinding samping yang dapat disesuaikan Rol sintetis yang dapat diatur dengan pengikis sintetis, lebar 320 mm, Ø 100 mm Celah antara pasangan rol (1. dan 2.) dapat diatur antara 3–40 mm, dengan drum yang dapat diatur dan dipasang pada pegas. Gbedpsxzzz Nefx Adtsg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Dijual gergaji kayu lapis dengan mesin frais Casati Macchine LZ 3100. Tahun pembuatan 2012. Panjang potong 3100 mm. Kondisi sangat baik. Tersedia segera. Gbodsxawnispfx Adtjg

Kondisi: sangat baik (bekas), Fully automatic band saw leveling machine Oppliger Gbedjd Sr Sispfx Adtjg Type PBS 860

Kondisi: bekas, Tahun pembuatan: 2010, 001 Gbjdpfx Aowmggkodtsg

Kondisi: bekas, Tahun pembuatan: 1981, Weinig U22N Jumlah spindle: 7 buah Lebar penyerutan: 220 mm Tinggi penyerutan: 120 mm Panjang meja masuk: 2.500 mm Rol penggerak pada meja: 2 buah Rol pada meja (tidak digerakkan): 3 buah Motor penggerak umpan: 5,5 kW Bantalan lawan: spindle 6 dan 7 Jointer: spindle 6 Susunan spindle Bawah 5,5 kW Kanan 3 kW Kiri 5,5 kW Kanan 7,5 kW Gbedpfx Adsx Da Rbstsg Atas 5,5 kW Atas 4 kW Bawah 4 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 230 mm, tinggi penyerutan: 120 mm, diameter spindel: 50 mm, lebar perataan: 230 mm, tinggi kerja: 120 mm, daya motor pengumpan: 37.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 3.000 rpm, jenis penyesuaian ketinggian: listrik, diameter poros mesin serut: 50 mm, jenis arus masuk: tiga fasa, jumlah spindel: 10, daya: 574 kW (780,42 hp), frekuensi input: 50 Hz, Perlengkapan: kabin, kecepatan rotasi dapat diubah tanpa batas, rem mesin, Weinig Powermat 2500 10 spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle arrangement: 1– Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2– Right (11 kW) 3– Left (11 kW) 4– Top (37 kW) – with fully automatic straight jointer 5– Bottom (18.5 kW) with hydraulic clamping and fully automatic straight jointer 6– Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7– Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8– Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9– Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10– Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table 1.3 metres (4 rollers) with 2 driven rollers above the table, and 2 driven rollers in the table. Both table rollers can be lifted. Table height adjustment with electronic digital display. Incl. 2 heavy-duty lateral pressure rollers, diameter 140 mm, pneumatic. Support feet, height 320 mm for table height 1190 mm Marathon POWER Coating for machine table, fences and guide rails (excluding infeed table and special table plates). Special coating to protect table plates, fences and guide rails against excessive wear. Recommended Godexz Thbjpfx Adtsbg for processing abrasive materials (e.g. tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Driven rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above with diameter 120 mm. In the area of the right and left spindle.

Kondisi: baru, Tahun pembuatan: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - planing width from 20 to 210 mm Gbjdpfx Adohq Rp Hstsg - planing height from 8 to 160 mm Spindle motors: 1st (bottom): 7.5 kW 2nd (right): 7.5 kW 3rd (left): 7.5 kW 4th (top): 11 kW 5th (bottom): 7.5 kW - Feed motor: 5.5 kW, feed speed adjustable from 6 to 36 m/min - Spindle speed: 6,500 rpm - Spindle diameter: 40 mm - Short timber feed, opposite the right spindle - Pressure rollers before and after the top spindle - Manual table lubrication pump - Machine weight: 3,100 kg Available from stock

Kondisi: bekas, Tahun pembuatan: 1966, Spindel dapat diputar: Tidak Gjdpexu Dhlofx Adtobg Penyesuaian ketinggian: Roda tangan Penyesuaian sudut kemiringan: - Penyesuaian rahang frais: Manual Indikator ketinggian: Skala Indikator sudut kemiringan: - Indikator penahan frais: Skala Diameter spindel frais: 30 mm Kecepatan putar: 2800, 4500, 6000, 5600, 8000, 12000 rpm Daya motor: 4 / 5,5 HP kW Rem motor: Manual Koneksi ekstraksi: 2 x 120 mm Panjang mesin: 2000 mm Kedalaman mesin: 900 mm Berat: 700 kg

Kondisi: sangat baik (bekas), Block band saw installation Band saw stand - Brenta 1500mm roller diameter Gbjdjfhl Snepfx Adtog Band saw carriage Artiglio Eagle 1100 3 supports With complete mechanization

Kondisi: sangat baik (bekas), set of tooling, planing cutterheads for moulding machine Gjdpfewbwkcsx Adtjbg

Kondisi: sangat baik (bekas), Mesin frais spindle bawah Felder F 700 M Pengaturan spindle naik-turun secara elektrik serta manual untuk sudut 0 hingga +45 derajat Poros diameter 30 mm dapat diganti Meja panjang 215 cm 4 kecepatan spindle Motor 5,5 kW Gbsdpfxjxyfrps Adteg Penguncian spindle Rem Kondisi sangat baik, mesin telah diperiksa, siap pakai sepenuhnya.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Four-side planer Weinig Hydromat 23 strip laminating machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed system: 7.5 kW / 6 – 36 m/min, Spindle arrangement: 1- Bottom (7.5 kW) 2- Right (7.5 kW) Gbedpfx Ajxqh E Hodteg 3- Left (7.5 kW) with profile jointer 4- Right (7.5 kW) with profile jointer 5- Top (7.5 kW) with hydraulic clamping 6- Bottom (30 kW) with hydraulic clamping 7- Top (7.5 kW) with hydraulic clamping and straight jointer 8- Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two driven rollers in the table.

Tahun pembuatan: 1980, Kondisi: bekas, Passage width: 560 mm Passage height: 560 mm Lift: 600 mm Max. speed: 320 rpm The saw frame system is fully mechanized, equipped with a new Moehringer quick-feed unit. Gbedpfx Adocvhndetog

Kondisi: bekas, Tahun pembuatan: 1998, Spindel dapat diputar: Tidak Pengaturan ketinggian: Handwheel Pengaturan rahang milling: manual Penunjuk ketinggian: Skala Penunjuk batas milling: Skala Gedpfexrbinjx Adtebg Diameter spindle milling: 30 mm Kecepatan putar: 3000, 4500, 6000, 9000 Daya motor: 6 kW Rem motor: Ya, otomatis Koneksi hisap: 140 mm Panjang mesin: 2300 mm Kedalaman mesin: 900 mm Berat: 700 kg

Kondisi: baik (bekas), Raimann K12 multirip saw Chain with spiker Gbsdpfx Asd Scdqedtsg Chain width: 430 mm Cutting height: approx. 120 mm with various accessories

Kondisi: baik (bekas), Tahun pembuatan: 2004, en-Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with independent 7.5 kW motor and spindle brake Speed 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with independent 7.5 kW motor, speed 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter, radial pneumatic pressure guide for different workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, radial NC axis Pneumatic axial control, traverse path 40 mm, glass bead discharge, pneumatically sequenced. - Feed system with 4 kW motor and feed brake Gbodpfxewyuluo Adteg - Short piece processing package - UC-Matic package consisting of: PLC control, central motor starting, workpiece monitoring, control terminal, free-standing control cabinet, free-standing operator panel, magnetic interlock of safety hood - Enhanced sound insulation - Automatic dressing and feeding system for different workpiece lengths and widths Workpiece dimensions: Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Driven conveyor belt Belt width: 250 mm, transport length: 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Fine Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, radial NC axis - First feed roller sequenced with photo sensors - NC axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 Hydro straight cutter heads 501 with HSS planing knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Kondisi: sangat baik (bekas), SCM Sintex NTE Four-Sided Planer Maximum planing width: 180 mm Maximum planing height: 105 mm 4 spindles Bottom + top spindle motor: 7.5 kW Right + left spindle motor: 7.5 kW Electric height and width adjustment Worktable lubrication pump Complete set of cutter heads Spindle speed: 6,000 rpm Spindle bore diameter: 35 mm Weight: 900 kg Gsdpfevzr Drjx Adtobg European CE certificate Technical documentation Condition: very good

Kondisi: baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 230 mm, tinggi penyerutan: 170 mm, diameter spindel: 50 mm, lebar perataan: 230 mm, tinggi kerja: 170 mm, daya motor pengumpan: 7.500 W, jenis penyesuaian ketinggian: listrik, diameter poros mesin serut: 50 mm, jumlah spindel: 8, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, 8 spindles, Working width: 230 mm, Working height: 180 mm, Gedpjr Axwnsfx Adtebg Spindle diameter: 50 mm, Feed: 7.5 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) - scoring spindle 2-Bottom (7.5 kW) 3-Right (11 kW) 4-Left (11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 powered rollers in table

Kondisi: baik (bekas), Tahun pembuatan: 1979, Diameter spindle: 30 mm Kecepatan putar: 2.800 - 4.500 - 6.500 - 10.000 rpm Motor: 10 HP Dimensi meja: 1.100 x 1.000 mm Diameter saluran ekstraksi: 2 x 120 mm Kisaran kemiringan: -5 hingga +45 derajat Maks. kenaikan spindle: 130 mm Berbagai macam alat tersedia dengan tambahan biaya Termasuk alat dorong 4-rol HOLZHER Tipe 1112, masing-masing dengan 4 kecepatan maju dan mundur Gbedpfx Asxran Nodteg Perpanjangan meja buatan sendiri di kanan & kiri Dengan alat sesuai gambar

Kondisi: bekas, Bandsaw sharpening machine Vollmer CAS L Feed direction: left to right with support stands auxiliary feed Gbodpfscvhubsx Adtsg in very good condition

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Working width: 260 mm Working height: 170 mm 5 spindles Spindle diameter: 40 mm Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW Gbedjvgnb Ropfx Adtjg 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion table Driven roller at outfeed table Supplied with tooling.