Beli Mencuci Keluar bekas (2.660)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Siedlce
10.199 km
Mesin pencuci tekanan bengkel
CORMAKMP140
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, A workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device allows for quick and cost-effective removal of contaminants. A significant advantage is the ability to operate the washer indoors.
A cabinet parts washer ensures effective removal of all types of contamination, from oils to hard-to-reach residues, while providing both safety and long-term performance of the cleaned components. The applied technology guarantees not only cleanliness but also protection from corrosion. It should be noted that cleaning results will depend on the detergents used.
The parts washer is designed to use up to 90 liters of cleaning agent, with a maximum tank capacity of 140 liters. For optimal performance, the pump inlet should be covered. The pump operates within a flow rate range of 2.7 to 3.6 liters per minute, enabling thorough cleaning of surfaces—even those with hairline cracks—thanks to a powerful jet. The cleaning fluid is drawn from the bottom in a closed-circuit system and delivered under pressure through a flexible hose.
The workshop parts washer is equipped with 4 legs for stable operation and an optimized working height. The lid locks automatically when opened. The unit also features a work surface below the tub level, which can be used to place cleaning accessories or washed parts to let them dry.
The machine requires self-assembly.
Technical data:
- Tank capacity: 140 L
- Maximum detergent volume: 90 L
- Maximum pump performance: 2.7–3.6 l/min
- Power supply: 230 V
- Dimensions: 1130x540x885 mm
- Tray dimensions: 800x500 mm
- Weight: 43 kg
- Power supply: 230 V
Self-assembly required.
The listed price is NET price. Delivery costs are not included.
For more information, please contact us by phone or email. We also invite you to visit our website to view our full offer.
Ksdpfxsrh Ey Re Afijdk
Iklan kecil
Siedlce
10.199 km
Mesin pencuci tekanan kabin
CORMAKINOX MP180
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, A high-quality stainless steel pressure cabin washer is a tool that sets new standards in cleaning performance. Engineered for professional applications, this washer delivers reliability, durability, and high efficiency.
Made from premium-grade stainless steel, it offers long-lasting resistance to environmental conditions, ensuring consistent performance even under the most demanding working environments.
Device Description:
Thanks to its robust stainless steel construction, our pressure cabin washer is highly resistant to corrosion and is designed for dependable operation in tough conditions. Equipped with advanced pressure washing technology, it effectively removes dirt, oil, grease, and other contaminants from various surfaces.
Our pressure cabin washer is an essential tool for businesses that value cleanliness, efficiency, and reliability. It simplifies, speeds up, and optimizes cleaning tasks, leading to increased customer satisfaction and greater operational productivity.
Cleaning takes place in a closed circuit, using a washing fluid heated up to 70°C. The solution is discharged through a gun nozzle under pressure up to 8 bar, which thoroughly cleans hard-to-reach areas and heavily soiled parts—from carbon deposits, greases, to oils. Both the elevated temperature and cleaning fluid enhance washing efficiency. The unit features adjustable feet and level settings.
The washer is equipped with a dual-function gun—allowing the emission of either air alone or air mixed with detergent. This enables drying of cleaned items with compressed air after washing.
Kjdpfouc Tpysx Afisdk
Advantages of using the stainless steel pressure cabin washer:
1. Thanks to high water pressure combined with detergents, the washer effectively removes even the most stubborn contaminants like oil, grease, or rust, resulting in clean and shiny surfaces.
2. The cabin washer enables fast and efficient cleaning of larger surfaces in less time compared to traditional manual cleaning methods.
3. With adjustable pressure settings, the washer can be tailored to different surface types and contamination levels, making it a versatile cleaning tool.
4. Made from high-quality stainless steel, the washer is resistant to corrosion and mechanical damage, ensuring long service life and reduced maintenance needs.
5. The cabin washer is user-friendly, allowing operators to quickly master its use and achieve professional results without lengthy training.
6. Rapid and effective cleaning boosts work efficiency, potentially leading to time and cost savings for businesses.
Investing in a stainless steel pressure cabin washer enhances not only cleanliness but also operational efficiency and equipment longevity, benefiting both companies and individual users.
MP180 Washer Specifications:
- Washer Capacity: 180 l
- Frequency: 50 Hz
- Weight: 56 kg
- Voltage: 230 V
- Height with legs: 1450 mm
- Height without legs: 920 mm
- Internal width: 740 mm
- Internal height (with lid open): 410 mm
- Internal depth: 500 mm
- Load height: 360 mm
- Load width: 700 mm
Iklan kecil
Siedlce
10.199 km
Mesin pencuci tekanan bengkel
CORMAKMP150
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, WORKSHOP PRESSURE WASHER MP150
Features:
Washing takes place in a closed circuit using a cleaning fluid. The agent is sprayed from the gun nozzle at a pressure of up to 8 Bar, allowing for thorough cleaning of hard-to-reach areas and heavily soiled parts contaminated with carbon deposits, grease, or oils.
This washer is ideally suited for turbocharger reconditioning as well as cleaning heavily soiled parts made of steel, cast iron, aluminum, and other alloys.
The washer’s lid is equipped with pneumatic actuators that enhance safety and the quality of work when using the washer.
The cabinet is standard-equipped with work area lighting.
The washer features a dual-function spray gun, which can dispense either only air or air mixed with the cleaning agent. The cleaned item can be dried with compressed air.
* Please note: The washer is supplied as a self-assembly kit.
Technical specifications:
Capacity: 160L
Fluid tank capacity: 8-14 L
Operating pressure: 5-8 bar
Kjdpfxjvugwme Afijdk
Weight: 29 kg
Air regulation
Pneumatic spray gun
Illuminated cabinet
Work area ventilation
Dimensions: 770x610x700mm
Iklan kecil
Siedlce
10.199 km
Mesin cuci bagian bengkel
CORMAKMP80
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The workshop parts washer is a versatile tool that should be included in every service centre, garage, or workshop. This indispensable device enables fast and cost-effective removal of contaminants. A major advantage is the possibility of operating the washer indoors.
The enclosed parts washer ensures the effective removal of all types of contamination, from oils to hard-to-reach deposits, while guaranteeing safety and long-term component performance. The technology used ensures not only cleanliness but also protection against corrosion. Please note that cleaning results will depend on the detergents used.
The parts washer is designed to hold up to 60 litres of cleaning fluid, with a maximum tank capacity of 80 litres. For maximum efficiency, the pump inlet should be covered during operation. The pump operates at a flow rate of 10 to 12 litres per minute, allowing thorough cleaning of surfaces, including those with fine cracks, thanks to the powerful jet. The fluid is circulated from the bottom by the pump in a closed-loop system and delivered under pressure via a flexible hose.
The workshop washer features four legs for stable operation and an optimised working height. The lid locks automatically when opened. The unit also includes a worktop located below the basin, which can be used to place washing accessories or cleaned parts for drying.
The device requires self-assembly.
Technical specifications:
- Tank capacity: 80 L
- Maximum pump capacity: 10-12 L/min
- Power supply: 230 V
- Dimensions: 775 x 540 x 915 mm
- Internal dimensions: 710 x 480 x 260 mm
- Shelf below basin: 700 x 420 mm
- Power supply: 230 V
Kodsvugvvspfx Afiedk
- Weight: 23 kg
Price does not apply to machines purchased in Poland.
Iklan kecil
Iserlohn
11.212 km
Mesin cuci suku cadang
ITSCleaner
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Industrial parts washing machine
Manufacturer: ITS, Model: Claener, Year of manufacture: 2001.
Ksdpfx Asurcxdefisdk
Temukan lebih banyak mesin bekas
Iklan kecil
Navarrés
12.176 km
Mesin pencuci gesekan – Daur ulang plastik
JIANGSUFS1000
Hubungi
Tahun pembuatan: 2016, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20161220, Dijual Mesin Pencuci Gesek model FS1000 dalam kondisi sangat baik, ideal untuk lini daur ulang plastik. Dirancang untuk pembersihan intensif serpihan dan film plastik melalui gesekan mekanis dan sistem injeksi air.
*Sistem rotor berkecepatan tinggi (sekitar 1000-1200 rpm)
Ksdpeymy Dnsfx Afisdk
*Struktur baja tahan korosi
*Pengoperasian terus-menerus pada lini pencucian
*Saringan 3 mm yang memastikan pemisahan kotoran secara efisien
*Dapat diintegrasikan dengan tangki flotasi dan sistem pengeringan
*Mesin telah direkondisi sepenuhnya dan berfungsi dengan sempurna
Iklan kecil
Premnitz
10.868 km
Filter pencucian balik
EREMASW 8/134 RTF
Hubungi
Kondisi: bekas, Tahun pembuatan: 2004, Sieve Changer EREMA SW8/134 RTF
Continuous Partial Area Backflush Filter with 4 carrier pistons (8 screens) for heavily contaminated polymers
Minimal pressure differences during backflushing or screen change
The melt filter system meets the highest standards for fine filtration, and is characterized by robustness, a high degree of automation, and maximum availability, plus improved homogenization of the melt.
Main components:
- 1x Continuous 4-piston backflush filter
- 1x Control and monitoring unit
- 1x Filter change operating unit
- 1x Hydraulic unit
System features:
Ksdpfxeualalo Afiedk
- Screen diameter: Ø 134mm
- Active filter area: 1128cm²
- Fully automatic flushing processes without production interruption
- Technical documentation
- Year of manufacture: 2004
Subject to prior sale
Inquiries by email only
Note:
The machine is still installed and can be inspected on site.
The buyer must arrange for dismantling and shipping.
This is not included in the offer price.
Iklan kecil
Włocławek
10.417 km
Mesin pencuci air-udara dengan garu
MegaPłuczko myjka wodno-powietrzna
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Water-air washer/rinser from Mega, designed for washing all types of vegetables.
Kodpfx Afewydcieisdk
Iklan kecil
Menslage
11.162 km
Mesin cuci botol MAG Sirio 7 (1995)
MAGFlaschenreinigungsmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 1995, Overview
The bottle washing machine “Sirio 7” from the German manufacturer MAG was built in 1995. Maintenance has been carried out regularly by MAG. The machine can be inspected and tested in person.
Technical details
- Capacity: up to 7,000 bottles/hour
- Bottle cells suitable for 1.0-litre bottles (smaller bottles can also be processed; additional insertion plates required)
- Bottle diameter: 78 – 90 mm
- Bottle height: 288 – 310 mm
- Number of bottle cells per row: 10
- Dimensions (L x W x H): 7,880 mm x 3,045 mm x 3,325 mm
- Empty weight: 14,300 kg
- Full load weight: 25,600 kg
Kjdpfx Afetrbrqjijdk
- Installed power: 20.85 kW
- Heating system: Steam, 3 bar
Iklan kecil
Menslage
11.162 km
Klotzki — mesin pencuci kotak (2011)
KlotzkiKastenwascher
Hubungi
Kondisi: bekas, Tahun pembuatan: 2011, en-001
Kdjdpewu S Susfx Afiek
Iklan kecil
Menslage
11.162 km
PAC CB 14-0,5L-R-7 LII mesin pencuci botol compact (1998)
PACFlaschenreinigungsmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 1998, Overview This bottle washing machine was manufactured in 1998 by the German company PAC. The model CB 14-0.5L-R-7 LII Compact is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures efficient cleaning via a multi-stage process involving caustic and hot water baths. The machine has 14,175 operating hours and is in good condition. Technical Specifications Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 - 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment duration: 11.65 minutes Bottle formats: Up to Euro-NRW Number of bottle rows per carrier: 14 Bottles in the machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot caustic 8.96 seconds Caustic II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Consumption Water consumption: 3.25 - 3.38 m³/h at 60°C Power connection: 12.0 - 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Frame width: 1,725 mm Height: 2,300 mm
Kdedpfjxn A S Nsx Afisk
Iklan kecil
Menslage
11.162 km
Mesin cuci botol PAC CB 12000-0.5-B95
PACFlaschenreinigungsmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 1996, Overview This bottle washing machine was built in 1995 by the Swiss manufacturer PAC. The machine is still in production and can be inspected in person. Technical details: Capacity: 10,000 bph Min/Max: 5,000 bph – 13,000 bph Bottle type: 0.5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions: Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4.0 – 4.8 m³/h Heat consumption at 80°C: 700 – 840 kJ/h x 1000 Power consumption: 17 kW Includes spare parts: Motors for rear and front drive Bottle cell carriers Wear parts
Kedpfsu H R Nnox Afisdk
Iklan kecil
Menslage
11.162 km
Kettner WAH26 mesin pencuci kotak (1992)
KettnerKistenwaschanlage
Hubungi
Kondisi: bekas, Tahun pembuatan: 1992, Ikhtisar Mesin pencuci peti Kettner, tipe WAH 26, diproduksi pada tahun 1992. Dengan kapasitas hingga 2.600 peti per jam, mesin ini cocok digunakan pada lini pengisian yang sudah ada untuk pembersihan peti minuman. Detail teknis Produsen: Kettner – Sotec GmbH Model: WAH 26 Tahun pembuatan: 1992 Kapasitas: 2.600 peti/jam
Kjdpfxsw N Nbue Afisdk
Iklan kecil
Menslage
11.162 km
Mesin pencuci botol GM Gera Arcade CDS (1999)
GM GeraFlaschenreinigungsmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 1999, Overview
The bottle washing machine was previously used in a brewery. Thanks to a complete overhaul in 2005 and ongoing maintenance, the machine is in excellent condition. All tanks and the machine frame are made of stainless steel. The machine is already dismantled and stored dry, making it easy to load and transport.
Technical Data:
Capacity: 6,700 bph
Cell Pitch: 102 mm
Bottles per Row: 10
Dimensions & Weights:
Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg
Ready to operate with additional components: 7,790 x 3,450 x 2,950 mm / 20,000 kg
Year of Manufacture: 1999
Formats: 0.33 l, 0.5 l
Machine Details / Features:
Steam heated
Pre-cleaning and removal of residual liquids via pulsed rinsing before washing
Kdjdpfxowg E D Ie Afiok
CE-certified
Chemical dosing pumps
Machine data sheet included
High-pressure pre-rinse
Rotating spray nozzles
Single-end machine
Label ejection rear right
Finger infeed/outfeed
Bottle holders made of plastic
Concentration measurement for NaOH storage liquid
Spindles in stainless steel
24 Volt control voltage
Siemens S7 control system
Regularly maintained
Complete machine frame in stainless steel
Exhaust air extraction
Machine dismantled, ready for shipping
Automated machine start (heating, etc.)
Iklan kecil
Menslage
11.162 km
Mesin cuci botol Krones Lavatec (2011)
KronesFlaschenreinigungsmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 2011, overview-the-bottle-washing-machine-was-manufactured-in-2011-by- the-german-company-krones-it-was-in-operation-until-recently-at-a -large-beverage-producer-and-is-still-installed-technical-details -capacity-20-000-bph-formats-0-25l-and-0-75l-number-of-bottles-pe r-row-22-siemens-s7-equipment-label-discharge-rotary-tube-sprayin g-continuous-machine-stainless-steel-housing-documentation-softwa re-backup-stainless-steel-pumps-conductivity-measurement-finger-f eeder-spare-parts-bottle-cell-tips-bottle-cell-carriers
Kdodpou Rindefx Afisk
Iklan kecil
Menslage
11.162 km
Mesin cuci botol Euro Class-D 20/1/73
KlingerFlaschenreinigungsmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 2000, Übersicht
Ksdpetxd A Sofx Afisdk
This bottle washing machine manufactured by Klinger in Germany was built in 2000. The bottle washer is constructed entirely from stainless steel, is equipped with Siemens S7 controls, dual heating systems, and cascade pumps for high cleaning performance.
Technical Data
- Capacity: 9,600 bottles/h
- 20 bottles per row
Scope of Supply
- Bottle washing machine | Klinger | Euroklasse-D 20/1/73 | 2000
- Water treatment system | Hager + Elsässer | 2000
- Includes cation and anion exchangers
- Includes salt tank, prefilter, and UV sensor
- Capacity: 5 m³/h
- The water treatment system is designed for operating both the bottle washer and the RO unit
- RO reverse osmosis system | Hager + Elsässer | 2000
- Full desalination capacity: 2.5 m³/h
Iklan kecil
Menslage
11.162 km
Mesin cuci botol NAGEMA Arcade DS 03/85/24
GM GeraFlaschenreinigungsmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 1993, summary
The bottle washing machine GM Gera NAGEMA Arcade DS was previously used in a brewery, where it operated in single-shift mode. Due to a decline in sales volume, the brewery’s bottling has been relocated, making this bottling line available. Thanks to its low operating hours and regular maintenance, the machine is in very good condition. All tanks and the machine frame are constructed from stainless steel. Spare parts, such as bottle cells, are still available. In 2018, the main drive shaft, motor, and gearbox (SEW) were overhauled, and the carrier chain was replaced in 2015. The machine is still assembled and can be demonstrated.
Technical Data:
- Capacity: 23,000 bottles/hour
- Cell spacing: 85 mm
- Bottles per row: 16
- Dimensions incl. attachments: 8640 x 4470 x 1920 mm / 17,900 kg
Details:
- Standard drives
Kdedpfxsl Hx Ads Afiok
- Steam heating
- Operator side: left
- CE certified
- Chemical dosing pumps
- Machine data sheet available
- Fixed-pipe spraying controlled by machine cycle
- Single-ended machine
- Label discharge rear right
- Finger discharge and finger infeed
- Bottle discharge left
- Bottle cells plastic
- HMI Lauer
- Caustic concentration measurement
- 24 volt control voltage
- S5 controller (conversion to S7 on request)
- Regularly serviced
- Water content in stainless steel
- Steam extraction
- Sample taps
- KSB pumps in stainless steel
- Insertable screens for baths
- Water meter
- Conductivity measurement by Endress
- Additional equipment: spare parts included
Iklan kecil
Menslage
11.162 km
Klann 1800 N mesin pencuci kotak (1997)
KlannKastenwascher
Hubungi
Kondisi: bekas, Tahun pembuatan: 1997, de-hu-01
Kdsdpoxrg H Sofx Afiek
Iklan kecil
Menslage
11.162 km
Mesin cuci botol Krones Lavatec (2013)
KronesFlaschenreinigungsmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 2013, Overview
The bottle washing machine was manufactured by the German company Krones in 2013 and commissioned in 2014. It has been serviced annually. Additionally, a surfactant caustic cleaning system and spare parts can also be purchased. DISMANTLING INCLUDED.
Technical Data
- Capacity: 66,000 bph
Kedpfx Asl Hx Enjfiedk
- Maximum bottle diameter: 69 mm
- Configured for the following formats:
- Vichy 0.33l
- Long-Neck 0.33l
- Long-Neck 0.5l
- NRW 0.5l
- Steinie 0.33l
Iklan kecil
Menslage
11.162 km
SIFA Idrokeg 21 Mesin Pencuci KEG (2020)
SIFAKEG Wascher
Hubungi
Kondisi: bekas, Tahun pembuatan: 2020, 887e9c24
Kdsdpfx Afsxcul Doiek
Iklan kecil
Menslage
11.162 km
Bor mesin cuci kotak R35 (2000)
BohrerKastenwascher
Hubungi
Kondisi: bekas, Tahun pembuatan: 2000, Overview This crate washer was manufactured in 2000 by the German company Bohrer. It is located in a German brewery and was part of a production line that was decommissioned as it was replaced by an entirely new line. The facility was shut down in autumn 2024, after which the machine was dismantled and placed in storage.
Technical Data
- Capacity: up to 2,000 crates/hour (adjustable from 500 to 2,500 crates/hour)
- Formats:
- Crate with 12 bottles, 700ml: 356 x 275 x 346 mm, lateral running direction
- Crate with 20 bottles, 250ml: 360 x 275 x 255 mm, lateral running direction
- Crate with 20 bottles, 500ml: 400 x 300 x 290 mm, lateral running direction
- Crate with 20 bottles, 500ml: 400 x 333 x 260 mm, lateral running direction
- Horizontal and vertical spray nozzles
- Washing with hot caustic solution and fresh water
- Integrated caustic solution heater with temperature control
- Machine is heated by steam
Kodsvm D Umepfx Afiodk
- Dimensions: Length: 4,800 mm; Width: 900 mm; Height: 1,400 mm
- Weight: 1,800 kg
- Screens for dirt removal
- Includes documentation
- Includes spare parts list
- Includes electrical schematic
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Solingen
11.259 km
GMP pencuci larutan pemanas skid
BRINOXLEP 2.3 KK6762 Paket 9
Hubungi
Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Manufacturer
BRINOX d.o.o.
Project Number
B-0001113-LEP2.3
LEP 2.3 KK6762 Package 9
Module
M024
Product Description
LEP2.3 – Washing Solution Temperature Control Unit
Serial Number
1003572
Equipment Number
20022782
Tag Number
MR-INH-VPR61-KK6762
Year of Construction
2020
Technical Data
System Type
Pharma temperature control skid for the precise temperature control of washing and elution solutions.
Constructed as a compact, multi-tiered stainless steel frame design with fully integrated pump, heat exchanger, and valve technology.
Dimensions
Length 1920 mm
Width 1365 mm
Height 1840 mm
Version
Completely pre-assembled, insulated temperature control skid
Pharmaceutical-grade design in accordance with GMP requirements
Industrial stainless steel frame construction
Materials
Product-contacting parts: Stainless steel 1.4435 / 1.4571
Frame construction: Stainless steel 1.4301
Welding in accordance with EN ISO 13920 D
Insulation
Completely insulated pipelines and apparatus
Closed-cell high-performance insulation with black protective casing
Main Components
PU1021 Process pump
PU9203 Cooling medium pump
WT1001 Plate heat exchanger
WT1011 Finned tube heat exchanger
BH9701 Expansion vessel
Pneumatically actuated control valves
GEMÜ stainless steel ball valves
Pressure transmitters
Temperature measuring points
Pressure gauges
Electrical connection box with warning label
Stainless steel cable trays
Media
Kdodpfx Afjyl Iwteijk
Cooling brine supply/return
Washing solution (process medium)
Control compressed air 6 bar
All media connections sealed at the factory and packaged for transport.
Leakage Tests
Performed as pressure tests with compressed air.
DP-01
Medium: Compressed air
Test pressure: 3.15 bar
Pressure drop: 0.13 bar
Date: 27.07.2020
Result: Passed
DP-02
Medium: Compressed air
Test pressure: 3.28 bar
Pressure drop: 0.07 bar
Date: 26.07.2020
Result: Passed
Pressure holding time: 1 hour each
No leaks detected
Calibration Certificates
Calibration laboratory: LOTRIČ Metrology
Certificates in accordance with EN ISO/IEC 17025
Measuring ranges: –1 to 20 bar and 0 to 10 bar
Calibration performed
Scope of Documentation
FAT plan and report
Deviation form
Layout drawing inspection
Maintenance inspection
P&ID diagram
Pressure test
Calibration certificates
Manufacturer's certificate 2.1 EN10204
Material list
As-built isometry
Complete turn-over package
Inspection Status
FAT performed
Pressure test passed
Calibrations available
PED-compliant design
Pharmaceutical documentation complete
Application
Temperature control of washing and elution solutions in biopharmaceutical production facilities
Suitable for GMP environments
Condition
New unit
Original packaging
Unused
Year of construction 2020
Factory condition
Fully documented
Immediately available
Iklan kecil
Solingen
11.259 km
GMP pencuci larutan pemanas skid
BRINOXLEP2.3 KK6761 Paket 8
Hubungi
Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Manufacturer: BRINOX
Type: LEP2.3 – Wash Solution Temperature Control Unit
Year of manufacture: 2020
Serial number: 1003507 LEP2.3 KK6761 Package 8
Tag no.: MR-INH-VPR61-KK6761
Equipment no.: 20023781
Technical Specifications
System type:
Temperature control unit / Heating and cooling module for wash solution (CIP or process cleaning system)
Design:
Compact, fully pre-assembled skid unit in a heavy-duty stainless steel frame construction, craneable via integrated lifting lugs.
Frame and structure:
Welded stainless steel construction in industrial design, free-standing, multi-layer pipework layout for optimal space utilization. Maintenance-friendly accessibility from several sides. Integrated cable trays.
Piping:
Stainless steel process pipes with hygienic finish, welded and partially flanged. Multi-layer thermal insulation for main lines and equipment. Integrated drain and vent valves.
Valve technology:
Several manual ball valves (GEMÜ) in main and secondary circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated into the heating and cooling loop.
Measurement and control technology:
Kdsdpfx Afeyl It Isijk
Temperature sensors in flow and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical connection box with safety labelling. Automatic temperature control via pneumatic control valve.
Heat exchanger:
Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop.
Pump technology:
Two electrically driven centrifugal pumps with red-lacquered motors for process circulation within the temperature control unit.
Electrics:
Electrical connection box with warning labelling. Wired sensors and actuators. Prepared for integration into an overall control or process control system.
Application
The unit serves for precise temperature control of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application are CIP systems, wash stations for production plants, and temperature-controlled cleaning processes in the pharmaceutical and biotech industries.
The wash solution is circulated in a closed loop by pumps, temperature-controlled via the integrated heat exchanger and continually monitored by sensors. Temperature regulation is automatic via pneumatic control valves to precisely maintain defined setpoints.
Construction
Compact modular skid construction with fully insulated main pipework. Stainless steel surfaces in a hygienic industrial design. Clear media routing and structured pipe arrangement. Crane-transportable via integrated lifting lugs.
Condition
Year of manufacture 2020. Very good visual and technical condition. Professionally executed pharmaceutical plant engineering.
FAT / Documentation
Typically supplied with CE conformity, factory acceptance test (FAT) as well as technical documentation including P&ID diagrams and material certificates for product-contact parts.
Special Features
Fully insulated temperature control module in a compact design with high power density. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing.
Iklan kecil
Solingen
11.259 km
GMP pencuci larutan pemanas skid
BRINOXLEP 2.3 KK6751 Paket 6
Hubungi
Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Manufacturer: BRINOX
Type: LEP 2.3 – Washing Solution Temperature Control Unit
Year of manufacture: 2020
Serial number: 1003561
Tag number: MR-INH-VPR61-KK6751
Equipment number: 20022779
Location: Germany
Condition: New, unused, original packaging
Technical Data
System type: Washing Solution Temperature Control Unit (temperature skid)
Design: Compact, pre-assembled skid unit in stainless steel frame
Frame material: Stainless steel
Insulation: Completely insulated piping and components
Pumps:
Two circulation pumps with electric motors
Stainless steel pump housings
Inline design
Heat exchanger:
Integrated stainless steel heat exchanger
Shell-and-tube or jacketed design
Fittings:
Multiple GEMÜ ball valves
Kedpfxjyl Ib Eo Afijdk
Stainless steel valves
Pneumatic control valves
Safety valves
Instrumentation:
Pressure transmitter
Manometers
Temperature measuring points
Integrated flow measurement
Electrics:
Integrated control cabinet or terminal box
Ready-wired for connection
Industrial standard components
Piping:
Stainless steel process piping
Fully insulated
Flange and clamp connections
Transport:
Forklift and crane-compatible
Robust stainless steel base frame
Application
The temperature control unit is used for precise temperature regulation of a washing solution within pharmaceutical or chemical processes.
Suitable for CIP and washing processes, pharmaceutical production lines, chemical process plants, and temperature-controlled media circuits.
Construction
Compact, modular skid design
Pre-assembled and ready for connection
High-quality stainless steel workmanship
Industrial quality components, including GEMÜ fittings
Service-friendly layout
Condition
New system
Never commissioned
Original packaging
Direct from manufacturer project
Immediately available
FAT & Documentation Status
Technical documentation available
Project documentation available
Drawings available
P&ID available
Component lists available
Operating manual available
Special Features
Completely insulated process piping
Premium stainless-steel construction
Industrial brand components
Ideal for new projects or as a replacement/redundancy unit
Immediate integration possible
Iklan kecil
Misterton
11.699 km
Mesin cuci peralatan
IWMEDI13A
Hubungi
Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), IWM EDI13A Utensilienwaschmaschine
Seriennummer: 1282
Baujahr 2014, Edelstahl-Utensilienwaschmaschine, ideal für Bleche, Töpfe und Pfannen, Waschzyklus für Pfannen: 2 bis 10 Minuten, Reinigungsraum: 1300 mm L x 700 mm B x 800 mm H, 13,7 kW, 3-phasig
Kodpfx Afoix Ixqjijdk
Kami memudahkan pencarian untuk Anda: "mencuci keluar"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.






































































































































































































