Beli Mep Cobra 352 bekas (140)

Kondisi: baru, Cutting diameter: 280 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control system: NC Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Dcedpfx Asfg E H Dsnzel Note: Special promotion price!!! • Fully automatic hydraulic band saw • Miter cuts up to 60° to the left possible • Saw band length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touchscreen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required space: 3.4 m² • Footprint: 1900 mm wide x 1800 mm deep

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Dimensions L x W x H: 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw with dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Driven chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vises. + Feed system with vertical rollers for lateral material support. Dcjdpfefg E Hzex Anzjl + Numerically controlled band saw, which can also be operated semi-automatically, featuring the new MEP 50 control unit, developed specifically by MEP for automatic machines, based on Windows CE. + “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring the cut surface when the band lifts at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7” touchscreen display and mechanical buttons, allowing for operational control of the saw, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Kondisi: baru, MSS2024-001 Dedpfx Ansfg E H Nszecl

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Dcsdpfxsfm T Hbe Anzjl Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys, up to a maximum of 350 x 350 mm. Standard equipment includes: - Powered chip conveyor, can be mounted on the right or left side of the machine - Vise clamping pressure regulation - Feed with vertical rollers for lateral material support - Sensors for material detection at the start - Clamping pressure regulation - Storage for up to 300 programs - The machine is available with either a 34 mm or 41 mm blade at no extra cost Price on request.

Kondisi: baru, Cutting diameter 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Bandsaw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electro-hydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic, dynamic, manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel on a swiveling arm. - Low-voltage operating panel: Polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display shows: * Diagnostics (messages in the user language) * Alerts (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for each cut * Bandsaw motor power consumption * Bandsaw tension Dcedpfx Anofg E H Uozjl * Bandsaw speed * Numerical display of the saw head position - Switch handle IP55 for manual 24V cycle. - Comprehensive program of all special cutting cycles. - Identification of other possible special cutting cycles for specific applications - New next-generation hydraulic control unit, highly efficient and low energy consumption. - Rotary table (mounted on 420 mm ball bearings with preloaded thrust bearing). - Dual blade speed (40/80 m/min.) with control - Prepared for the addition of an electronic inverter for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow feed programmable directly from the control panel for adaptation to material. - Vise unit laterally adjustable left and right, with quick-action vise. - Hand-operated blade tension control with electronic converter display on screen. - Machine base designed to completely collect coolant even at maximum mitre angles. - Coolant pan (with electric pump for blade lubrication and cooling) and chip tray (can be replaced by a chip conveyor – see optional accessories) are integrated in the machine base. - Prepared for installation of minimal blade lubrication kit (optional, in addition to the standard emulsion oil lubrication). - Chip-cleaning brush. - The machine is designed for pallet jack transport. - Adjustable length stop for repeated cuts of equal length - Material support arm with roller for attaching a loading platform - Bimetal saw blade for solid and profile material. - Tools and user manual in the respective user language.

Kondisi: baru, Cutting diameter 280 mm Cutting range at 90 degrees: flat 380 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic functions, for cuts from 45° right to 60° left. Key features: Dcjdpfxjfg E Iao Anzjl - Swivelling control panel on vertical post - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts - Dual band speed (40/80 m/min.)

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Machine weight approx. 0.4 t Dimensions LxWxH 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Some features: Dedpfjfg E H Rjx Anzecl - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Dcedpfxsfg E H Ss Anzsl Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Dcsdpfefg E H Tjx Anzol Tools and operating instructions included.

Kondisi: baru, Tahun pembuatan: 2024, Manual cutting cycle Automatic cut: (via selector switch) with stepless adjustment of descent speed and adjustment of cutting pressure via compensating spring Dcodpeftmxvsfx Anzol Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted rotary table, center-axis-bolted and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Hydraulic unit for saw band tensioning and monitoring with display on the manometer Clearly arranged control panel with all operating elements Base frame, coolant tray, coolant pump, chip brush Cutting diameter: 250 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Max. vice opening: 285 mm Band speed: 36 / 72 m/min Cutting capacity at 90 degrees, round: 250 mm Cutting capacity at 90 degrees, square: 220 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 60 degrees, round: 120 mm Cutting capacity at 60 degrees, flat: 140 x 80 mm Cutting capacity at 60 degrees, square: 80 mm Cutting capacity at 45 degrees, round: 200 mm Cutting capacity at 45 degrees, flat left: 220 x 200 mm / right: — Cutting capacity at 45 degrees, square left: 200 mm / right: 170 mm Machine weight approx. 0.4 t Space requirement approx. 1.8 x 1.3 x 1.8 m

Kondisi: baru, Saw blade diameter 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Blade speed: 15 – 150 rpm Total power requirement: 5.5 kW Machine weight approx. 0.615 t Space requirement approx. 1.4 x 1.4 x 2.0 m Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: - Saw head glides on ball recirculation linear double guides - Three-stage gearbox - Infinitely variable speeds, 15–150 rpm - Vice opening 190 mm - Stroke of the saw head programmable directly from the control panel, adjustable to match the cutting material Dcodpofg Rldefx Anzjl - Pneumatic vertical vice - HSS DMO 5 saw blade, Ø 370x32x3 mm for solid and profile material - Vice with counter-hold device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical length cuts - Material support arm, also with connection option for roller conveyor/loading side

Kondisi: baru, Cutting diameter: 330 mm Cutting range at 90 degrees, flat: 510 x 320 mm Cutting range at 90 degrees, square: 320 x 320 mm Dcedsfg E Ibopfx Anzel Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: bekas, Tahun pembuatan: 1999, Sägeblattdurchmesser 275 mm Schnittbereich bei 90 Grad: rund 80 mm Dcodpfxsl R Nnnj Anzsl Schnittbereich bei 90 Grad: vierkant 70 mm Schnittbereich bei 90 Grad: flach 100 x 60 mm Schnittbereich bei 45 Grad: rund 70 mm Schnittbereich bei 45 Grad: vierkant 60 mm Schnittbereich bei 60 Grad: flach 80 x 50 mm Spannbereich 110 mm Drehzahl 45 / 90 U/min Gesamtleistungsbedarf 0,5 kW Maschinengewicht ca. 0,07 t Raumbedarf ca. 900 x 700 x 1600 m Manuelle Kaltkreissäge mit: - Maschinenuntergestell - Auflageschiene 1500mm

Kondisi: baru, Saw blade diameter 130 mm Cutting capacity at 90 degrees: round 130 mm Cutting capacity at 90 degrees: square 120 mm Cutting capacity at 90 degrees: flat 180 x 100 mm Cutting capacity at 45 degrees: round 115 mm Cutting capacity at 45 degrees: square 100 mm Cutting capacity at 45 degrees: flat 120 x 100 mm Motor 3.3 / 4.4 kW Dcedpehpktyofx Anzjl Speed 1400 / 2800 rpm Machine weight approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electro-mechanical vertical circular saw for the use of carbide-tipped saw blades, designed for series cuts from 45° right up to 60° left.

Kondisi: bekas, Tahun pembuatan: 2007, mep-shearline-flexiplus-desc Dedpoymb T Defx Anzscl