Beli Mep Falcon 275 bekas (117)

Kondisi: baru, MEP SHARK 350 NC HS 5.0 Fully Automatic Double Column Metal Band Saw Article Number MEP SHARK 350 NC HS 5.0 Motor Power 4.0 kW Table Opening 355 mm Blade Dimensions 4640x34x1.1 mm Itedji Hmcdjpfx Aahsr Weight 2800 kg Blade Speed 15 - 115 m/min, infinitely variable Cutting Capacity 0° 350 / 350x350 mm Cutting Capacity 45° right Cutting Capacity 45° left Cutting Capacity 60° right Cutting Capacity 60° left Description: Fully automatic hydraulic band saw in double column construction for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Numerically controlled band saw that can also be operated semi-automatically, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows-2 "CE". Standard features include: Powered chip conveyor, installable to the right or left side of the machine. Adjustable clamping pressure for the vices. Material feeder with vertical rollers for lateral support. Clamping pressure regulation. Up to 100 programs storable. The machine is available with either a 34 mm or 41 mm blade at no additional cost.

Kondisi: baik (bekas), Rentang pemotongan baja bulat pada 45°: 250 mm, Rentang pemotongan baja bulat pada 90°: 280 mm, ketinggian potong (maks.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Sawing speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Mitre cutting range: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Iodpjtt Nd Rjfx Aahetr Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, max. bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions (LxWxH): approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control unit defective. Documentation available. On-site inspection possible. Itodpfxjuwrv De Aaher

Kondisi: baik (bekas), Tahun pembuatan: 2002, Bandsaw otomatis MEP Model: Shark 320 AXI Tahun: 2002 Kapasitas bulat: 260 mm Kapasitas pada 45 / 60 derajat: 230 mm / 150 mm Kapasitas persegi: 320 x 220 mm Itsdpfx Aew Na T Ujahjr Kecepatan: 40 - 80 m/menit

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, For sale is a used, fully functional semi-automatic mitre band saw machine. Cutting capacities: 0° 330 mm 320 mm 450 x 320 mm +45° 320 mm 300 mm 300 x 300 mm +60° 210 mm 200 mm 200 x 200 mm -45° 320 mm 300 mm 300 x 300 mm -60° 210 mm 200 mm 200 x 200 mm Max. vice opening: 455 mm Blade dimensions: 4500 x 34 x 1.1 mm Main drive power: 4.0 kW – three-phase Blade speed: 15 – 100 m/min Itodpfjwigavox Aahor Accessories: 4.5 m roller conveyor, various saw blades

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 750 mm, panjang total: 450 mm, lebar total: 450 mm, Bandsaw machines - base frame with front flap, color RAL 6011 reseda green Iodovzak Hjpfx Aahjtr

Kondisi: baru, MEP TIGER 372 CNC LR 4.0 Article number TI372CNCLR Motor power 4.0 kW Vise opening 190 mm Blade dimensions 370x32x3 Weight 1,060 kg Cutting speed 15–150 rpm Cutting capacity at 0° 120 / 110 / 180x100 mm Cutting capacity at 45° right 115 / 100 / 120x100 mm Cutting capacity at 45° left Cutting capacity at 60° right Cutting capacity at 60° left Description Electromechanical vertical circular saw with semi-automatic operation, designed for use with HSS saw blades, suitable for precision cuts from 45° right to 60° left. Equipped with multi-microprocessors and two controlled axes, allowing up to 80 different cutting programs (each with different cutting lengths and quantities) to be programmed for the same material cross-section. Standard features: - Saw head travels on double linear guideways with ball bearings - Saw head feed by electromechanical cylinder - Rotating axis with thrust bearing - Three-stage gearbox - Material feed (length 1000 mm) via ball screw with stepper motor and moving feed vice Itedpfschkyrjx Aahsr - Vise opening: 190 mm - Saw head stroke programmable directly from the control panel to adapt to the cutting material - Pneumatic vertical vise - HSS DMO 5 saw blade Ø 370x32x3 mm for solid and profile material - Chip removal brush - Machine designed for pallet truck transport, including tools and user manual Electrical Equipment: - Control panel - Up to 80 programmable cutting programs - Operation indicator light - Main safety switch - Programming and control console, LCD display with auto-diagnostics - LED function check on the control panel - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, protection rating IP 55 - 24 V low-voltage system - Electrical coolant unit for blade lubrication and cooling (option for micro-spraying system) - Motor 4.0 kW - 400 V MEP TIGER 372 CNC LR 4.0 RC with automatic mitre adjustment Article number TI372CNC LR 4.0 RC Motor power 4.0 kW Vise opening 190 mm Blade dimensions 370x32x3 Weight 1,060 kg Cutting speed 15–150 rpm Cutting capacity at 0° 120 / 110 / 180x100 mm Cutting capacity at 45° right 115 / 100 / 120x100 mm Cutting capacity at 45° left Cutting capacity at 60° right Cutting capacity at 60° left Description Automatic electromechanical vertical circular saw designed for use with HSS saw blades for serial cuts with automatic mitre adjustment from -45° to +45° on steel. In semi-automatic mode, mitre cuts from -45° to +60° can be performed. Equipped with multi-microprocessors and two controlled axes, allowing up to 80 different cutting programs (each with different cutting lengths and quantities) to be programmed for the same material cross-section. Standard features: - Saw head travels on double linear guideways with ball bearings - Saw head feed by electromechanical cylinder - Rotating axis with thrust bearing - Three-stage gearbox - Material feed (length 1000 mm) via ball screw with stepper motor - Moving feed vice - Vise opening: 190 mm - Saw head stroke programmable directly from the control panel to adapt to the cutting material - Pneumatic vertical vise - HSS DMO 5 saw blade Ø 370x32x3 mm for solid and profile material - Chip removal brush Electrical Equipment: - Control panel - Up to 80 programmable cutting programs - Operation indicator light - (further electrical equipment as above)

Kondisi: baik (bekas), Tahun pembuatan: 1998, diameter mata gergaji: 300 mm, For sale is a MEP Tiger 300, a high-quality circular saw designed for metalworking. This machine was manufactured in 1998 but is still in good condition. It is perfectly suited for workshops and production environments that require a reliable and precise sawing solution. Machine Features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Iedov Tlcrspfx Aahotr Year of manufacture: 1998 Saw type: Semi-automatic/manual circular saw Saw blade diameter: 300 mm Cutting capacity: Suitable for round bars, square profiles, and miter cuts Cutting angles: 90° and 45°, with mitre cuts possible in both directions Materials: Ideal for cutting iron, steel, and other metals Condition: Good condition Coolant supply: Integrated cooling system for improved cutting quality and extended blade life

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11900715/C, diameter mata gergaji: 350 mm, panjang pemakanan sumbu X: 180 mm, panjang umpan sumbu Z: 170 mm, panjang total: 2.210 mm, lebar total: 1.100 mm, tinggi total: 1.550 mm, Rentang pemotongan baja bulat pada 90°: 120 mm, Rentang pemotongan baja bulat pada 45°: 120 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (min.): 15 rpm, kecepatan rotasi (maks.): 90 rpm, ketinggian potong (maks.): 170 mm, berat keseluruhan: 530 kg, kecepatan mata gergaji: 90 rpm, tegangan masuk: 400 V, Rentang pemotongan baja persegi pada 45°: 100 mm, Kisaran pemotongan baja persegi pada 90°: 105 mm, penggerak gergaji: 2.200 W, diameter pemotongan: 120 mm, lubang pisau gergaji: 32 mm, de Itedpfx Aajwtr Iyohor

Kondisi: sangat baik (bekas), jam operasional: 1.170 h, MEP automatic bandsaw Model: Shark 310 AX Capacity, round: 230 mm Capacity, rectangular: 310 x 220 mm Blade size: 2850 x 27 x 0.9 mm Operating hours: 1,170 Itsdpfx Aajw Hy Hkehsr Very good condition

Kondisi: bekas, MEP 40 Straightening and Cutting Bench Number of bars: - No. 1 Ø 40 mm - No. 2 Ø 32 mm - No. 3 Ø 26 mm - No. 4 Ø 20 mm - No. 5 Ø 16 mm 22 Fy= 600 N/mm² - ft = 650 N/mm² Minimum cutting length: 800 mm Maximum length: 12,000 mm Itjdpfxovtx Eyj Aahor Measurement tolerance: +/- 1 mm/m Maximum positioning speed: 2 m/s Measuring ejection speed: 2.2 m/s Number of compartments: 5 + 5 Minimum cutting length: 800 mm Maximum length: 12,000 mm Measurement tolerance: +/- 1 mm/m Maximum positioning speed: 2 m/s Ejection speed measurement: 2.2 m/s Number of compartments: 5 + 5

Kondisi: baru, MEP TIGER 352 NC 5.0 [Fully Automatic] Article number TI352NC Motor power 3.0 kW Vice opening 190 mm Blade dimensions 350x32x2.5 mm Weight 680 kg Cutting speed 15 - 90 m/min Cutting capacity 0° 115 / 95 / 180x95 mm Cutting capacity 45° right 110 / 95 / 125x95 mm Cutting capacity 45° left - Cutting capacity 60° right - Ijdpfxjchhhde Aahotr Cutting capacity 60° left - Description: Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed to make serial cuts from 60° left to 45° right on steel. The machine also operates in a semi-automatic cycle. Fully CNC-controlled automatic machine featuring a multiprocessor and two axes controlled by the latest generation MEP controller, allowing up to 1000 different cutting programs to be configured for the same material thickness, each with its own cutting length and quantity. FEATURES: - New centralized control console on an articulating arm, enabling operators to easily access the emergency stop from any working position. - NEW: Fieldbus communication system (Modbus protocol) with dual microprocessor and serial port. - Display: 20 characters x 4 lines showing the following technical parameters: + saw blade speed + number of programmed and completed cuts + blade thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings. - NEW: Display and logging of alarm and error messages, with the ability to review incidents. - NEW: 600 mm material feed with stepper motor and precision ball screw mounted on opposing ball bearings. - NEW: Electronic inverter for continuous blade speed regulation from 15 – 90 rpm (optionally 30 – 150 rpm). - NEW: Low-voltage control panel: polyester membrane keypad with thermoformed, raised buttons and actuation control signal. - Dual gear set for high sawing performance. - Saw head operates on double linear ball guides. - Coaxial cylinder with bypass valve for rapid approach and a potentiometric linear transducer for head position detection. - Programmable saw bow stroke directly from the control panel to accommodate material height. - Adaptive control of cutting force. - Rotary table with central pin and axial bearing for precise miter cuts. - Pneumatic vertical vice. - Electric coolant pump for blade cooling and lubrication. - Swarf removal brush. - Signal lamp for program completion or emergency stop. - HSS saw blade Ø 350 x 32 x 2.5 mm for solid and sectional material. - Prepared for installation of a minimum quantity lubrication system (OPTIONAL), in addition to the standard emulsion oil lubrication system supplied. Please refer to the attached PDF for further technical specifications.

Kondisi: baru, MEP COBRA 352 SX evo [Semi-Automatic] Article Number: CB352SX Motor Power: 1.5 / 2.2 kW Vise Opening: 180 mm Blade Dimensions: 350 x 32 x 3.4 mm Ijdpfxechkv Io Aahjtr Weight: 285 kg Speed: 1700 / 3400 rpm Cutting Capacity at 0°: 120 / 105 / 180x70 mm Cutting Capacity at 45° right: 120 / 100 / 135x60 mm Cutting Capacity at 45° left: Cutting Capacity at 60° right: Cutting Capacity at 60° left: Description Semi-automatic circular saw for cutting solid and hollow aluminium materials and light alloy metals, equipped with an electrowelded carbide-tipped saw blade. Standard Equipment: - Machine designed for mitre cuts from 45° right to 45° left. - Head tilting allows for cut processing anywhere between 0° and 45° to the left. - MEP presents its latest generation control unit for semi-automatic machines, featuring single-axis microprocessor control. - OPERATING CYCLE: At the beginning of each cycle – Vice closes, motor starts, saw head lowers for cutting, motor stops, saw head lifts, vice opens. - NEW – 16-character, 2-line display provides technical parameters such as: number of cuts performed, cutting time, ammeter, and over 100 diagnostic messages and warnings. - NEW – Event display and logging of alarm and error messages, with the option to review incidents. Electrical Equipment: - NEW – Low-voltage control panel: Polyester membrane keypad with thermoformed, raised buttons and operation control signal. - Saw bow stroke can be programmed directly from the control panel for adaptation to material size. - Ball-bearing rotary table ensures smooth and precise positioning. - Clamping system with two end-positioned vices, freely adjustable along the longitudinal axis of the part. - Adjustable mechanical stops for quick head positioning at angles of 0° and 45° right and left. - Chip remover prepared for optional extraction system. - Automatic saw blade lubrication system, activated only at cutting start. - Machine supplied without saw blade. - Ready for installation of minimum-quantity lubrication kit for saw blade (optional), as well as standard coolant-based lubrication. - Includes tool kit, user manual, and spare parts list. For further technical data, please refer to the attached PDF document (Catalogue, p. 2).

Kondisi: baru, MEP COBRA 352 NC 5.0 [Fully Automatic] Article Number CB352NC 5.0 Motor Power 2.6/3.5 kW Vise Opening 180 mm Band Dimensions 350x32x3.4 mm Weight 600 kg Speed 1700/3400 rpm Cutting Capacity 0° 120 / 105 / 180x70 mm Cutting Capacity 45° right 120 / 100 / 135x60 mm Cutting Capacity 45° left Cutting Capacity 60° right Cutting Capacity 60° left Description Mitre cutting automatic saw with semi-automatic function for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swivelling 0°-45° to the left. Control is via multi-microprocessor units, while two NC-controlled axes allow up to 1,000 different cutting programs to be stored, each with variable quantities and lengths, for the same material. -New centralized control panel on an articulated arm, allowing operation from any working position and immediate access to the emergency stop at all times. -Fieldbus communication system with dual microprocessor and serial port. -Display with 20 characters x 4 lines for real-time indication of the following technical parameters: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and over 100 diagnostic messages and warnings. -New – Alarm and error message logging with event history display. New – 600 mm material feed with drive motor and ball screw, mounted on opposing ball bearings. -New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised buttons and activation LED. -Stroke of saw bow programmable directly from the control panel to adapt to cutting material. Iodpfxschkwho Aahetr -Ball bearing mounted turntable for easy and precise rotation. -Clamping system with two front-end vises, positionable along the length of the part. -Adjustable mechanical stops for rapid head positioning at 0 and 45 degrees both left and right. For further technical data, please refer to the attached PDF document (page 3 of the catalog excerpt).

Kondisi: baru, MEP COBRA 352 MA Article Number: CB352MA Motor Power: 2.2 kW Vice Opening: 180 mm Blade Dimensions: 350x32x3.4 Weight: 210 kg Speed: 1700/3400 rpm Cutting Area 0°: 120 / 105 / 180x70 Cutting Area 45° right: 120 / 100 / 135x60 Cutting Area 45° left: Cutting Area 60° right: Cutting Area 60° left: Description: Manual circular saw for cutting aluminium, capable of mitre cuts from 45° right to 45° left, with a saw head that swivels from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when the saw head is lowered. Standard Equipment: - Roller-bearing turntable for quick and precise mitre adjustment - Screw locking to fix the saw head in any angular position - Automatic saw blade lubrication system - Clamping system with two vices - Saw head locking in the upper position - Adjustable length stop for repetitive cuts of equal length - Vice opening 180 mm - Includes tools and operating manual Electrical Equipment: - Control panel - Marked cable connections - Power-on indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Handle switch with IP 55 protection rating Itsdechku Sepfx Aahsr - Low voltage system 24 volts - Motor 1.5/2.2 kW – 400 volts Please refer to the attached PDF document for further technical details.

Kondisi: baru, MEP SHARK 332-1 CCS metal band saw with semi-automatic descent. MEP Authorized Dealer – Please send us your inquiry! Motor power 1.5/1.8 kW Vice opening 335 mm Itjdpfxocgbt Rs Aahsr Blade dimensions 3650 x 27 x 0.9 mm Weight 640 kg Blade speed 40/80 m/min Cutting capacity at 0° 300 / 260x260 / 330x260 mm Cutting capacity at 45° right 260 / 250x250 / 270x200 mm Cutting capacity at 45° left 200 / 180x180 / 200x160 mm Cutting capacity at 60° right 180 / 170x170 / 170x170 mm Cutting capacity at 60° left Description of the MEP Saw: Operation in CCS version: After material is positioned and the vices are closed, the cutting cycle can be started. The saw frame descends by its own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the necessary position for the next loading cycle. Electrical control panel (marked cable connections, readiness indicator, main safety switch lockable with padlock, switch or speed selector, emergency stop, thermal-magnetic protection, 24 volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vice with quick lock. Base frame with coolant tray and chip drawer, which can be replaced with a motorized chip conveyor (optional accessory). Electric coolant pump for band lubrication and cooling. Chip removal brush. Adjustable precision stops for repetitive length cutting. Machine is suitable for pallet truck transport. Bi-metal saw blade for solid and profile material. Tool set and operating instructions included. Motor 1.5/1.8 kW 2 speeds: 40/80 m/min. Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg Cutting data – see image. For further technical data, please refer to the attached PDF document.

Kondisi: bekas, Tahun pembuatan: 2006, de Iodoww Ay Iopfx Aahjtr