Beli Mep Tiger 350 Ax bekas (130)

Kondisi: baru, de-hu-it-lt-001 Hnsdpfxsyv Nfuj Ab Sju

Kondisi: bekas, * Saw blade diameter: 350 mm Hsdpfxofc T Ufs Ab Sjnu * Cutting capacity at 90° (round): 120 mm * Cutting capacity at 90° (square): 105 mm * Cutting capacity at 90° (flat): 180 x 70 mm * Cutting capacity at 45° (round): 120 mm * Cutting capacity at 45° (square): 100 mm * Cutting capacity at 45° (rectangular): 135 x 60 mm * Saw blade speeds: 1700 / 3400 rpm * Total power requirement: 1.5 / 2.2 kW * Machine weight: approx. 0.210 t * Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminum, capable of mitre cuts from 45° right to 45° left, with the saw head swiveling from 0° up to 45° to the left. On the Cobra 352 MA (with automatic vice), the vices close automatically when lowering the saw head. • Roller-bearing turntable for rapid and precise mitre adjustment • Screw locking system to fix the saw head in any angular position • Automatic saw blade lubrication • Clamping system consisting of two vices • Saw head lock in the upper position • Adjustable length stop for consistent cut lengths • Vice opening: 180 mm

Kondisi: baru, trans-001 Hsdpfx Abjyv Na Ss Senu

Kondisi: baru, Saw blade diameter 130 mm Cutting capacity at 90 degrees: round 130 mm Cutting capacity at 90 degrees: square 120 mm Cutting capacity at 90 degrees: flat 180 x 100 mm Hedpfx Aehpktyjb Sjnu Cutting capacity at 45 degrees: round 115 mm Cutting capacity at 45 degrees: square 100 mm Cutting capacity at 45 degrees: flat 120 x 100 mm Motor 3.3 / 4.4 kW Speed 1400 / 2800 rpm Machine weight approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electro-mechanical vertical circular saw for the use of carbide-tipped saw blades, designed for series cuts from 45° right up to 60° left.

Kondisi: baru, 1 Hjdpfxeyvvqko Ab Sjnu

Kondisi: baru, 2 speeds: 36/72 m/min Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330x260 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170x170 mm Cutting capacity at 45°: round 260/200 mm Cutting capacity at 45°: square 250/180 mm Cutting capacity at 45°: flat 270x200/200x160 mm Saw blade dimensions: 3650x27x0.9 mm Hnjdpfeyv Nmlox Ab Sou Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic-dynamic and manual function. Equipped with MEP-30 control for mitre cuts from 45° right to 60° left. The MEP 30 represents the latest generation of controls. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head raises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via manual push button - Upper position is saved automatically Main features: - Hydraulic unit with solenoid valve, highly efficient and high-pressure hydraulic pump (200 bar) - Electronic machine control with new-generation microcontroller - Centralized electrical system in the main switch cabinet - Display for alarms, diagnostics, and machine functions (cutting time, number of cut pieces, amp draw of saw blade motor, saw head position, saw blade speed, blade tension) - Manual-semi-automatic/dynamic function as standard Additional features: - Low-voltage control panel: Polyester membrane keypad with thermoformed, raised keys and confirmation signal - Manual 24 V cycle switch handle, IP55 - Complete program of all special cutting cycles - New hydraulic control unit with low energy consumption; stand-by operation - Rotary table on roller bearing, 420 mm, with preloaded thrust bearing, equipped with interchangeable steel worktable - Saw bow stroke programmable directly from control panel to adapt to material size - Clamping device laterally adjustable to left and right, with quick-acting vice - Manual blade tension control with display on screen via electronic converter

Kondisi: bekas, Saw blade diameter: 350 mm Cutting range at 90 degrees (round): 120 mm Cutting range at 90 degrees (square): 105 mm Hjdpfx Abefc T Ugo Sjnu Cutting range at 90 degrees (flat): 180 x 70 mm Cutting range at 45 degrees (round): 120 mm Cutting range at 45 degrees (square): 100 mm Cutting range at 45 degrees (rectangular): 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. The machine is suitable for miter cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis, it is possible to carry out sawing operations with the head tilted from 0° up to 45° to the left.

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 – 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Features: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - Equipped with additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and fast setting of all machine parameters * With additional soft keys and backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm in length - Material feed with stepper motor via ball screw * Single stroke of 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise setting of cutting feed rate with indication in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cutting start - Large dimensioned, adjustable cast steel deflection wheels - Saw blade tension with tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-adjust vice * With interchangeable clamping and stop jaws - Large, side-mounted chip tray and coolant tank * Equipped with 2 electric pumps for band lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Info from manufacturer: When installing this saw on a power network with residual-current circuit breaker (RCD), it should be all-current sensitive and not rated below 300 mA. Hedpfxsxabwho Ab Senu SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Hodpfx Abexaa S Re Senu Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vise opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for full function management * Front right, rotatable - Choice of manual or automatic bow descent * Infinitely variable adjustment of bow lowering speed - Carbide blade guides - Hydraulic blade tensioning with digital value display - 2 x blade speeds - 1 x bi-metal saw blade - 1 x angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Semi-automatic operation: - Electro-hydraulic vise clamping - Electro-hydraulic bow descent - Electro-hydraulic bow lift - Electro-hydraulic vise opening SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Band speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * positioned at the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of saw bow descent - Carbide saw blade guides - Hydraulic saw blade tensioning – incl. digital value display - 2x band speeds - 1x bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice Hnjdpfx Abexaagbe Ssu SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90°: flat 280 x 220 mm Cutting capacity at 90°: square 220 x 220 mm Cutting capacity at 45°: round 230 mm Cutting capacity at 45°: flat 220 x 200 mm Cutting capacity at 45°: square 200 x 200 mm Cutting capacity at 60°: flat 140 x 100 mm Cutting capacity at 60°: square 100 x 100 mm Cutting capacity at 60°: round 110 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotary table * For miter cuts from 45° right to 60° left - Automatic saw bow lowering * Infinitely variable feed adjustment * Automatic cut-off at end of cut - Manual cutting function selectable - 2x saw blade speeds - Carbide blade guides - 1x saw band - 1x angle stop - Rotating chip removal brush - Operator control panel – front right - Hydraulic power pack for saw blade tensioning * With analog pressure gauge (manometer) - Machine base with forklift pockets Hodpfxexabpwj Ab Sjnu - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 100 mm Cutting capacity at 90 degrees: flat 130 x 80 mm Cutting capacity at 45 degrees: round 100 mm (left) Cutting capacity at 45 degrees: round 75 mm (right) Blade speed 30 / 60 rpm Saw blade dimensions 350 x 32 mm Machine weight approx. 220 kg Features: - Robust cast iron construction - Gearbox with bronze gear and ground/hardened steel worm in special oil bath - Vice with counter-clamping device for double workpiece clamping - Electric coolant pump for saw blade cooling and lubrication Scope of delivery: - Adjustable length stop 600 mm - Tool kit Hnsdsxabnmjpfx Ab Seu - Detailed operating manual, maintenance handbook - Wiring diagrams and exploded views - Lifting eyes for transport * Machine is supplied without saw blade Included special accessories: - Base cabinet with door (steel stand)

Kondisi: baru, Tahun pembuatan: 2024, Manual cutting cycle Automatic cut: (via selector switch) with stepless adjustment of descent speed and adjustment of cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted rotary table, center-axis-bolted and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Hydraulic unit for saw band tensioning and monitoring with display on the manometer Clearly arranged control panel with all operating elements Base frame, coolant tray, coolant pump, chip brush Hnjdpfx Aboftmxvs Ssu Cutting diameter: 250 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Max. vice opening: 285 mm Band speed: 36 / 72 m/min Cutting capacity at 90 degrees, round: 250 mm Cutting capacity at 90 degrees, square: 220 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 60 degrees, round: 120 mm Cutting capacity at 60 degrees, flat: 140 x 80 mm Cutting capacity at 60 degrees, square: 80 mm Cutting capacity at 45 degrees, round: 200 mm Cutting capacity at 45 degrees, flat left: 220 x 200 mm / right: — Cutting capacity at 45 degrees, square left: 200 mm / right: 170 mm Machine weight approx. 0.4 t Space requirement approx. 1.8 x 1.3 x 1.8 m

Kondisi: baru, 001 Hnedpsyv Narofx Ab Sju

Kondisi: baru, SHARK282CCS-HU-20240611 Hnodpeyv Nptefx Ab Ssu

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Hedpfxefg E H Ss Ab Sjnu Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Bandsaw blade dimensions: 4640x34x1.1 mm 2 speeds: 15-100 m/min Vice opening: 515 mm Cutting capacity at 90 degrees: square 320 mm Cutting capacity at 90 degrees: round 330 mm Cutting capacity at 90 degrees: flat 510x320 mm Cutting capacity at 45 degrees left: round 320 mm Cutting capacity at 45 degrees left: square 320 mm Cutting capacity at 45 degrees left: flat 350x320 mm Cutting capacity at 60 degrees left: round 230 mm Cutting capacity at 60 degrees left: square 230 mm Cutting capacity at 60 degrees left: flat 230x310 mm Cutting capacity at 45 degrees right: round 320 mm Cutting capacity at 45 degrees right: square 320 mm Cutting capacity at 45 degrees right: flat 380x320 mm Cutting capacity at 60 degrees right: round 250 mm Cutting capacity at 60 degrees right: square 250 mm Cutting capacity at 60 degrees right: flat 250x320 mm Total power requirement: 4 kW Weight: 1190 kg Machine dimensions: 2000x1200x1800 mm Electrohydraulic, semi-automatic bandsaw with MEP 30 control system for mitre cuts from 0° to 60° left. The MEP 30 represents the latest generation of control systems. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for cutting - Motor stops - Saw head raises – vice opens Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with latest-generation micro-controller - Electrical system centralized in main control cabinet Hsdpfx Aoyv Nkksb Sjnu - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, bandsaw motor current draw, saw head position, bandsaw speed, band tension)

Kondisi: baru, Cutting diameter: 250 mm Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Cutting range at 60°: flat 110 x 110 mm Cutting range at 60°: square 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring Hjdpfx Ajxz Hhzjb Ssnu - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade

Kondisi: baru, MSS2024-001 Hnodpjfg E H Nsfx Ab Ssu

Kondisi: baik (bekas), Radial fan, chip extraction blower, fan, extraction system, dust extraction unit, chip blower, extraction unit Hodpfxjh Szars Ab Sonu - Manufacturer: MEP, extraction unit with transport frame - Type: unfortunately no type designation - Motor: Cantoni 0.75 kW / 2840 rpm - Base frame: on castors - Dimensions: 950/480/H1860 mm - Weight: 40 kg

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vice with 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Control MPE CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H): 1800 x 1900 x 1750 mm Equipment/features: - Heavy-duty electro-hydraulic fully automatic bandsaw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE”-based MEP 50 control and 7” touch screen display * Simple and rapid adjustment of all machine parameters * With additional softkeys + backlit display * 10 programs, each with max. 9999 parts and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm, repeatable for any desired length * Accuracy of ±0.1/600 mm - Feeder with protective cover and safety limit switch - Precise adjustment of cutting feed with display in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start - Large, adjustable cast steel band wheels - Blade tension with belt tension monitoring and display indication - Carbide blade guides for highest cutting accuracy - Automatic monitoring of cutting load - Quick-adjustable vice * With interchangeable clamping and stop jaws Hnjdexaa Ewopfx Ab Sou - Large, laterally extendable chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for blade cleaning - Operating manual in German Manufacturer's note – please observe: When installing this saw in a power network equipped with residual current device (RCD), it should be a type B all-current sensitive RCD with a rating not below 300 mA.

Kondisi: baru, Cutting diameter: 230 mm Cutting range at 90 degrees, flat: 230 x 230 mm Cutting range at 90 degrees, square: 230 x 230 mm Vise width: 235 mm Speed range: 15 - 100 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control system: MEP CNC Total power requirement: 3.18 kW Machine weight approx.: 1175 kg Space requirement approx.: 1980 x 1105 mm * Automatic double-column bandsaw with only 2.5 sqm footprint * * Maximum performance in the smallest space * Equipment: - Powerful CNC bandsaw machine with double-column design * for 0° cuts - Windows-CE based touch-screen controller * Swivel control panel, adjustable from 5.0 to 180° * Up to 100 cutting programs, each with different quantities and lengths * Minimizes programming time for frequently repeated jobs - 2 operating modes (semi-automatic and automatic) * Enables efficient cutting under all conditions - Saw head feed via hydraulic cylinders . Powered linear guides with preloaded ball bearings * Reduces mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - Feed system with 600 mm stroke, repeatable for all lengths - Vertical roller pairs for any type of bar or bundle material - Infinitely variable blade speed adjustment from 15 to 100 m/min Hnodpoxabq Uefx Ab Ssu - Robust cast iron frame (G25) to compensate for vibrations - Safety enclosure according to the latest safety regulations . In accordance with Machinery Directive EN 13898/2007

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame Hjdpjxaatbjfx Ab Ssnu * Infinitely variable adjustment of the saw frame descent - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display - 2x saw band speeds - 1x bi-metal saw band - Coolant device - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Kondisi: baru, Diameter pemotongan: 300 mm Area pemotongan pada 90 derajat: bentuk datar 330 x 260 mm Area pemotongan pada 90 derajat: bentuk persegi 260 x 260 mm Area pemotongan pada 45 derajat: bentuk datar 270 x 200 mm Area pemotongan pada 45 derajat: bentuk bulat 260 mm Area pemotongan pada 45 derajat: bentuk persegi 250 x 250 mm Area pemotongan pada 60 derajat: bentuk datar 170 x 170 mm Area pemotongan pada 60 derajat: bentuk persegi 170 x 170 mm Area pemotongan pada 60 derajat: bentuk bulat 180 mm Rentang kecepatan: 40 / 80 m/menit Dimensi pita gergaji: 3650 x 27 x 0,9 mm Pengendali: MEP Daya motor: 1,5 / 1,8 kW Berat: 670 kg Hedpfx Ajxaav Aeb Ssnu Fitur: - Mesin gergaji pita semi-otomatis elektro-hidraulik yang kokoh (INDUSTRI) - Dengan pemotongan miring dari 45° ke kanan hingga 60° ke kiri * Pengaturan sudut miring melalui piring putar besar - Pengendali mikroprosesor MEP EVO untuk mengontrol semua fungsi * Dapat diputar, terletak di bagian depan kanan - Penurunan busur gergaji secara manual atau otomatis * Pengaturan tanpa langkah penurunan busur gergaji - Panduan pita gergaji dari pelat karbida - Ketegangan pita gergaji hidraulik - termasuk tampilan nilai digital - 2 kecepatan pita gergaji - 1 pita gergaji BI-Metal - Sistem pendingin - 1 penghenti sudut - Sikat pembersih serpihan - Rangka mesin dengan kantung untuk forklift - Instruksi pengoperasian dalam bahasa Jerman Cara kerja pengoperasian semi-otomatis: - Penjepit elektro-hidraulik dari penjepit - Penurunan elektro-hidraulik dari busur gergaji - Pengangkatan elektro-hidraulik dari busur gergaji - Pembukaan elektro-hidraulik dari penjepit

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment - Cut-off switch at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base Hodpfx Absxaa H Ij Sjnu - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system