Beli Mep Tiger 350 Sx bekas (136)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
MEP
Iklan kecil
Ahaus
11.235 km
Gergaji pita
MEP - HalbautomatSHARK 282 SXI EVO
Hubungi
Kondisi: baru, Cutting diameter: 250 mm
Cutting capacity at 90 degrees, flat: 280 x 220 mm
Cutting capacity at 90 degrees, square: 220 x 220 mm
Cutting capacity at 45 degrees, flat: 220 x 200 mm
Cutting capacity at 45 degrees, round: 230 mm
Cutting capacity at 45 degrees, square: 200 x 200 mm
Cutting capacity at 60 degrees, flat: 140 x 100 mm
Cutting capacity at 60 degrees, square: 100 x 100 mm
Cutting capacity at 60 degrees, round: 150 mm
Vice width: 285 mm
Cutting speed range: 36/72 m/min
Saw band dimensions: 2950 x 27 x 0.9 mm
Total power requirement: 1.5 / 1.8 kW
Machine weight: approx. 460 kg
Space requirement: approx. 1150 x 1970 mm
Equipment:
- Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL)
- With mitre cuts from 45° to the right up to 60° to the left
* Mitre adjustment via a large rotary table
- MEP microprocessor control EVO for managing all functions
* Swivel-mounted, located front right
- Choice of manual or automatic lowering of the saw frame
* Infinitely variable adjustment of the saw frame descent
- Saw band guide made from hard metal plates
- Hydraulic saw blade tensioning - incl. digital value display
- 2x saw band speeds
- 1x bi-metal saw band
- Coolant device
- 1x angle stop
- Chip removal brush
- Machine base with forklift pockets
Crjdpfexaatbsx Ag Deb
- Operating manual in German
Operation in semi-automatic mode:
- Electro-hydraulic clamping of the vice
- Electro-hydraulic lowering of the saw frame
- Electro-hydraulic raising of the saw frame
- Electro-hydraulic opening of the vice
Iklan kecil
Ahaus
11.235 km
Gergaji pita
MEP - HalbautomatSHARK 382-1 SXI evo
Hubungi
Kondisi: baru, Cutting diameter 280 mm
Cutting capacity at 90°: flat 380 x 260 mm
Cutting capacity at 90°: square 260 x 260 mm
Cutting capacity at 45°: flat 300 x 200 mm
Cutting capacity at 45°: round 260 mm
Cutting capacity at 45°: square 250 x 250 mm
Cutting capacity at 60°: flat 200 x 170 mm
Cutting capacity at 60°: square 170 x 170 mm
Cutting capacity at 60°: round 180 mm
Blade speed range: 40 / 80 m/min
Saw blade dimensions: 3440 x 27 x 0.9 mm
Motor power: 1.5 / 1.8 kW
Required space: approx. 1647 x 2157 mm
Weight: 720 kg
Equipment:
- Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL)
- Enables mitre cuts from 45° right to 60° left
* Mitre adjustment via large rotary table
Crodexaax Dspfx Ag Dob
- MEP microprocessor control unit EVO for managing all functions
* Located front right, rotatable
- Optional manual or automatic lowering of the saw bow
* Infinitely variable adjustment of the saw bow lowering speed
- Saw blade guide with carbide inserts
- Hydraulic saw blade tensioning – including digital tension indicator
- Two saw blade speeds
- One bi-metal saw blade
- Coolant system
- One angle stop
- Swarf removal brush
- Machine base with forklift pockets
- Operating manual in German
Semi-automatic operation process:
- Electro-hydraulic clamping of the vise
- Electro-hydraulic lowering of the saw bow
- Electro-hydraulic lifting of the saw bow
- Electro-hydraulic opening of the vise
Iklan kecil
Ahaus
11.235 km
Gergaji pita
MEP - HalbautomatSHARK 512 SXI evo
Hubungi
Kondisi: baru, Cutting diameter: 330 mm
Cutting capacity at 90 degrees, flat: 510 x 320 mm
Cutting capacity at 90 degrees, square: 320 x 320 mm
Cutting capacity at 45 degrees, flat: 350 x 320 mm
Cutting capacity at 45 degrees, round: 320 mm
Cutting capacity at 45 degrees, square: 300 x 300 mm
Cutting capacity at 60 degrees, flat: 230 x 310 mm
Cutting capacity at 60 degrees, square: 200 x 200 mm
Cutting capacity at 60 degrees, round: 200 mm
Speed range: 15 - 100 m/min
Saw blade dimensions: 4640 x 34 x 1.1 mm
Motor power: 4.0 kW
Weight: 1190 kg
Specifications:
- Sturdy electro-hydraulic semi-automatic bandsaw (INDUSTRIAL)
- Capable of mitre cuts from 45° right to 60° left
* Mitre angle adjustment via large rotating table
- MEP EVO microprocessor control for managing all functions
* Located front right, rotatable
Credpsxaa Tzjfx Ag Deb
- Optional manual or automatic descent of the saw bow
* Infinitely adjustable saw frame descent
- Carbide blade guides
- Hydraulic blade tensioning with digital display
- 2 blade speeds
- 1x bi-metal bandsaw blade
- Coolant system
- 1x angle stop
- Chip removal brush
- Machine base with forklift pockets
- Operating manual in German
Semi-automatic operation functionality:
- Electro-hydraulic vice clamping
- Electro-hydraulic saw frame lowering
- Electro-hydraulic saw frame lifting
- Electro-hydraulic vice opening
Iklan kecil
Ahaus
11.235 km
Gergaji pita
MEP - HalbautomatSHARK 332-1 SXI EVO
Hubungi
Kondisi: baru, Cutting diameter: 300 mm
Cutting capacity at 90° (flat): 330 x 260 mm
Cutting capacity at 90° (square): 260 x 260 mm
Cutting capacity at 45° (flat): 270 x 200 mm
Cutting capacity at 45° (round): 260 mm
Cutting capacity at 45° (square): 250 x 250 mm
Cutting capacity at 60° (flat): 170 x 170 mm
Cutting capacity at 60° (square): 170 x 170 mm
Cutting capacity at 60° (round): 180 mm
Speed range: 40 / 80 m/min
Bandsaw blade dimensions: 3650 x 27 x 0.9 mm
Motor power: 1.5 / 1.8 kW
Weight: 670 kg
Equipment:
- Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL)
- Mitre cuts from 45° right to 60° left
* Mitre adjustment via large rotary table
- MEP EVO microprocessor control for monitoring all functions
* Swivels, located at the front right
- Optional manual or automatic bow descent
* Infinitely variable adjustment of saw bow descent
- Carbide blade guides
- Hydraulic blade tensioning with digital readout
- 2x bandsaw blade speeds
- 1x bi-metal bandsaw blade
- Coolant system
- 1x angle stop
- Chip removal brush
- Machine base with forklift pockets
- Operating manual in German
Semi-automatic operation procedure:
- Electro-hydraulic clamping of the vise
Codoxaav Aepfx Ag Derb
- Electro-hydraulic lowering of the saw bow
- Electro-hydraulic raising of the saw bow
- Electro-hydraulic opening of the vise
Iklan kecil
Broderstorf
10.850 km
Gergaji pita
MEP452 SXI EVO
Hubungi
Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, For sale is a used, fully functional semi-automatic mitre band saw machine.
Cutting capacities:
0° 330 mm 320 mm 450 x 320 mm
+45° 320 mm 300 mm 300 x 300 mm
+60° 210 mm 200 mm 200 x 200 mm
-45° 320 mm 300 mm 300 x 300 mm
-60° 210 mm 200 mm 200 x 200 mm
Max. vice opening: 455 mm
Csdpfx Aowigaveg Djrb
Blade dimensions: 4500 x 34 x 1.1 mm
Main drive power: 4.0 kW – three-phase
Blade speed: 15 – 100 m/min
Accessories: 4.5 m roller conveyor, various saw blades
Iklan kecil
Velen
11.245 km
Bandsaw - Horizontal
MEPSHARK 512 SXI EVO
Hubungi
Kondisi: baru, Cutting diameter: 330 mm
Cutting range at 90 degrees, flat: 510 x 320 mm
Cutting range at 90 degrees, square: 320 x 320 mm
Speed range: 40 / 80 m/min
Saw blade dimensions: 3440 x 27 x 0.9 mm
Motor power: 1.5 / 1.8 kW
Weight: 670 kg
Crjdpfx Agofg E Ibe Djb
Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right.
Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°.
The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position.
Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min.
Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.
Iklan kecil
Günzburg
11.087 km
Mesin gergaji pita
MEPShark 320 AXI
Hubungi
Kondisi: bekas, Tahun pembuatan: 1997, Sägebandabmessungen 3150 x 25,4 x 0,9 mm
2 Geschwindigkeiten 20/40 m/min
Schnittbereich bei 90 Grad: rund 260 mm
Schnittbereich bei 90 Grad: vierkant 250 mm
Schnittbereich bei 90 Grad: flach 320 x 200 mm
Codpfsyyc A Isx Ag Djrb
Schnittbereich bei 45 Grad: rund 230 mm
Schnittbereich bei 45 Grad: vierkant 210 mm
Schnittbereich bei 45 Grad: flach 240 x 200 mm
Zubehör:
-Posten Sägebänder
Iklan kecil
Ahaus
11.235 km
Mesin gergaji pita
MEP - VollautomatSHARK 331-1 NC 5.0 Spider
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2015, Cutting range 300 mm
Cutting range at 90°: flat 330 x 260 mm
Codpsy I Da Rsfx Ag Dorb
Cutting range at 90°: square 260 x 260 mm
Cutting range at 45°: round 260 mm
Cutting range at 45°: flat 270 x 200 mm
Cutting range at 45°: square 250 mm
Cutting range at 60°: round 180 mm
Cutting range at 60°: flat 170 x 170 mm
Cutting range at 60°: square 180 mm
Automatic feed 9999.9 mm
Minimum feed 2.0 mm
Minimum cutting diameter 5.0 mm
Blade speed 15 - 100 m/min
Vice opening 340 mm
Saw blade dimensions 3650 x 27 x 0.9 mm
Control MEP CNC
Total power requirement 2.2 kW
Weight 1240 kg
Dimensions (LxWxH) 1800 x 1900 x 1750 mm
Current new price approx. 23,000 Euro
Special price on request
Equipment:
- Robust electro-hydraulic fully automatic band saw (INDUSTRIAL)
- With additional semi-automatic function, for cuts from 0° to 60° to the left
- WINDOWS “CE” based MEP 50 control and 7” touch screen display
* Simple and quick setting of all machine parameters
* Additional softkeys + backlit display
* 10 programs with up to 9999 pieces and max. 9999.9 mm length each
- Material feed with stepper motor and ball screw
* Single stroke 600 mm, repeatable for any length
* Accuracy of ± 0.1/600 mm
- Feeder with protective cover and safety limit switch
- Precise adjustment of cutting feed rate with indication in mm/min
- Saw head positioning and feeder movement via joystick
- Automatic detection of the cutting start
- Large-sized, adjustable steel cast drive wheels
- Saw blade tension with tension monitoring and display indication
- Carbide blade guides for highest cutting precision
- Automatic monitoring of cutting load
- Vice with quick adjustment
* Replaceable clamping and stop jaws
- Large, side-mounted swarf tray and coolant tank
* Equipped with 2 electric pumps for saw blade lubrication and cooling
* Coolant gun for machine cleaning
- Swarf cleaning brush for the saw blade
- Operating manual in German
Manufacturer information:
When installing this saw in a network with a residual current circuit breaker (RCCB),
it should be all-current sensitive and not less than 300 mA.
Iklan kecil
Wiefelstede
11.134 km
Bandsägeautomat mit Rollenbahn Längenanschlag
MEP*SHARK 320 AXI
Hubungi
Kondisi: baik (bekas), item001
Crodpfoy Hu H Ejx Ag Dob
Iklan kecil
Nijverdal
11.262 km
Mesin gergaji pita
MepShark 281
Hubungi
Kondisi: sangat baik (bekas), Bandsaw - horizontal
Pabrikan: Mep
Tipe: Shark 281
* Siklus pemotongan manual
* Siklus pemotongan otomatis
Credpfxey Ntt Ae Ag Dsb
* Diameter pemotongan 250 mm
* Panjang pita gergaji 2950x27x0,9 mm
* Kecepatan pita 36/72 m/menit
* Pengaturan 0°, 45°, 60° kanan & kiri
* Perangkat pendingin
* Kebutuhan daya total 1,8 kW
* Berat mesin sekitar 400 kg
Iklan kecil
Wien
10.644 km
Gergaji dingin
MEPCOBRA 352 MA
Hubungi
Kondisi: baru, cobra352ma-specs
Crodpfx Aoy Dh Nnog Deb
Iklan kecil
Głosków
10.292 km
Mesin gergaji pita
MEP Shark332 CCS Hydra
Hubungi
Kondisi: bekas, Tahun pembuatan: 2009, Mesin pemotong besar dan kokoh dari merek ternama MEP SHARK CCS HYDRA
- penuh semi-otomatis
- diameter pemotongan batang 300 mm
- dimensi 320x260 mm
- Putaran KIRI/KANAN
- pita pemotong 3320x27x0,9 mm
- pompa pendingin
- penjepit ragum otomatis
- berat mesin 700 kg
- meja rol asli (100 kg)
- dilengkapi dengan 3 pita pemotong baru
- dokumentasi asli
Crodpfxsy Ani Ee Ag Dsb
Mesin asli dalam kondisi teknis sangat baik dan siap pakai. Dapat dilihat di Głosków dekat Warsawa.
Iklan kecil
Neukirchen beim Heiligen Blut
10.879 km
Otomatis penuh gergaji pita dua tiang
MEPSHARK 230-1 NC HS
Hubungi
Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: fungsi terbatas, ketinggian potong (maks.): 230 mm, lebar pemotongan (maks.): 245 mm, tinggi total: 1.680 mm, lebar total: 1.950 mm, berat keseluruhan: 1.000 kg, berat kosong: 1.000 kg, panjang umpan sumbu Y: 500 mm, panjang mata gergaji pita: 2.950 mm, lebar pita gergaji: 27 mm, panjang bagian (maks.): 9.999 mm, kebutuhan tinggi: 2.100 mm, persyaratan ruang panjang: 2.900 mm, lebar yang dibutuhkan: 1.950 mm, panjang meja: 2.800 mm, lebar meja: 245 mm, tinggi kerja: 890 mm, Rincian teknis lebih lanjut tersedia di buku petunjuk penggunaan dan pemeliharaan yang akan disertakan saat penjualan.
Jika Anda memiliki pertanyaan lebih lanjut, silakan hubungi kami melalui telepon atau email.
Salam hormat,
Codpfx Agex Dirzs Dsrb
Weber Geländersysteme
Iklan kecil
Drachten
11.270 km
Mesin gergaji pita
MepShark 260
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1997, Gergaji pita bekas dari MEP
Credjy A Eccepfx Ag Dsb
Tipe: Shark 260
Kapasitas: 260 x 210 mm
Termasuk 2 x konveyor
Iklan kecil
Ahaus
11.235 km
Gergaji pita
MEP - VollautomatSHARK 332-1 NC 5.0
Hubungi
Kondisi: baru, Cutting diameter 300 mm
Cutting range at 90 degrees: flat 330 x 260 mm
Cutting range at 90 degrees: square 260 x 260 mm
Cutting range at 45 degrees: round 260 mm
Cutting range at 45 degrees: flat 270 x 200 mm
Cutting range at 60 degrees: round 180 mm
Cutting range at 60 degrees: flat 170 x 170 mm
Material support height 600 mm
Feed min/max 50,000 mm
Vice opening 335 mm
Blade speed 15 - 100 m/min
Automatic feed 600 mm
Saw blade dimensions 3650 x 27 x 0.9 mm
Control MEP CNC
Total power requirement 2.2 kW
Weight 1,105 kg
Dimensions L-W-H 3.3 x 2.83 x 2.23 m
electro-hydraulic fully automatic band saw, additionally with:
* semi-automatic
* semi-automatic dynamic
* manual operation
Description:
- Robust electro-hydraulic fully automatic band saw (INDUSTRIAL)
* MEP - WINDOWS numerical control unit
* User interface with 7” touch screen display
* Mechanical buttons for saw operations
* Ensures reliable operation, simple and intuitive
* Real-time monitoring of all cutting parameters
* Swiveling arm for convenient and safe operation
* Display and logging of alarm and error messages
- Mitre cuts in automatic cycle from 0° to 60° left
- Semi-automatic, semi-automatic dynamic and manual cycles
* Mitre cuts from 45° right to 60° left
- Manual or semi-automatic dynamic cycle selectable
* allows cuts without programming
- Safety enclosure for operator protection
- Infinitely variable cutting speed from 15 to 100 m/min
* via frequency inverter
- Latest generation hydraulic unit
* Highly efficient with low energy consumption
- Material feed via stepper motor and ball screw
* Mounted on opposing ball bearings
* Single stroke 600 mm, repeatable for any length
- Saw head positioning and feeder movement via joystick
- Automatic detection of cut start position
- Manual blade tension control with display indication
* via electronic converter
- Automatic monitoring of cutting load
* via servo valve mounted directly to the cylinder
- Coolant tray integrated into the base frame
- Chip removal brush
- Bimetal saw blade for solid and profile material
- Tools and operating instructions with spare parts list
Credpjxabavofx Ag Dob
* Mitre accuracy = 2/12 degrees
* Length accuracy = plus/minus 0.1 mm per feed stroke
Manufacturer information – please note:
When installing this saw in a power network with residual-current circuit breaker (RCD), it must be all-current sensitive (TYPE B) and rated not less than 300 mA.
Iklan kecil
Ahaus
11.235 km
Gergaji pita
MEP - VollautomatSHARK 331-1 NC 5.0 Spider
Hubungi
Kondisi: baru, Cutting capacity 300 mm
Cutting capacity at 90 degrees: flat 330 x 260 mm
Crodpfxexaa Ewe Ag Djb
Cutting capacity at 90 degrees: square 260 x 260 mm
Cutting capacity at 45 degrees: round 260 mm
Cutting capacity at 45 degrees: flat 270 x 200 mm
Cutting capacity at 45 degrees: square 250 mm
Cutting capacity at 60 degrees: round 180 mm
Cutting capacity at 60 degrees: flat 170 x 170 mm
Cutting capacity at 60 degrees: square 180 mm
Automatic feed 9999.9 mm
Minimum feed 2 mm
Minimum cutting diameter 5 mm
Blade speed 15 - 100 m/min
Vice with 340 mm opening
Saw blade dimensions 3650 x 27 x 0.9 mm
Control MPE CNC
Total power requirement 2.2 kW
Weight 1240 kg
Dimensions (L x W x H): 1800 x 1900 x 1750 mm
Equipment/features:
- Heavy-duty electro-hydraulic fully automatic bandsaw (INDUSTRIAL)
- With additional semi-automatic function, for cuts from 0° to 60° left
- WINDOWS “CE”-based MEP 50 control and 7” touch screen display
* Simple and rapid adjustment of all machine parameters
* With additional softkeys + backlit display
* 10 programs, each with max. 9999 parts and max. 9999.9 mm length
- Material feed with stepper motor via ball screw
* Single stroke 600 mm, repeatable for any desired length
* Accuracy of ±0.1/600 mm
- Feeder with protective cover and safety limit switch
- Precise adjustment of cutting feed with display in mm/min
- Saw head positioning and feeder movement via joystick
- Automatic detection of cutting start
- Large, adjustable cast steel band wheels
- Blade tension with belt tension monitoring and display indication
- Carbide blade guides for highest cutting accuracy
- Automatic monitoring of cutting load
- Quick-adjustable vice
* With interchangeable clamping and stop jaws
- Large, laterally extendable chip tray and coolant tank
* Equipped with 2 electric pumps for blade lubrication and cooling
* Coolant gun for cleaning the machine
- Chip removal brush for blade cleaning
- Operating manual in German
Manufacturer's note – please observe:
When installing this saw in a power network equipped with
residual current device (RCD), it should be
a type B all-current sensitive RCD with a rating
not below 300 mA.
Iklan kecil
Jerman
11.023 km
Gergaji pita otomatis - horizontal
MEPSHARK 230-1 NC HS 5.0
Hubungi
Kondisi: baru, Cutting diameter round: 230 mm
Cutting diameter square: 230 x 230 mm
Saw blade length: 2950 x 27 x 0.9 mm
Blade speed: 15 – 100 m/min
Total power requirement: 2.2 kW
Machine weight: approx. 1.2 t
SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant length of 60 mm.
- Maximum cross-section: 230 x 230 mm
- Numerically controlled band saws featuring the new Windows “CE” based CNC system, specially developed by MEP for automatic operation.
FEATURES:
- User interface with 7” touch screen display and mechanical keys for the band saw’s operational functions, ensuring reliable performance, intuitive operation, and real-time monitoring of all cutting parameters.
Credpfx Agefg E Hys Dsb
- Safety enclosure according to the latest safety regulations of Machinery Directive EN 13898/2007.
- New fieldbus communication system with dual microprocessor and serial connection.
- Robust cast iron frame (G25) to compensate for vibrations, enhance machine stability, and extend blade life.
Iklan kecil
Jerman
11.023 km
Gergaji pita otomatis - horizontal
MEP - VOLLAUTOMATSHARK 332-1 NC 5.0
Hubungi
Kondisi: baru, Cutting diameter 300 mm
Saw band length 3320 x 27 x 0.9 mm
Cutting width 300 mm
Control NC
Cutting range at 90 degrees: flat 330 x 260 mm
Cutting range at 90 degrees: square 260 x 260 mm
Cutting range at 45 degrees: square 250 mm
Cutting range at 45 degrees: flat 270 x 200 mm
Cutting range at 60 degrees: round 180 mm
Cutting range at 60 degrees: square 170 mm
Band speed 15 - 100 m/min
Total power requirement 2.2 kW
Machine weight approx. 1.1 t
Space requirements approx. 3.3 x 2.83 x 2.23 m
Equipment:
- Electrohydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic, and manual operation
- Automatic cycle (cuts from 0° to 60° left)
- Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left)
- Manual or semi-automatic dynamic cycle allows for direct cuts outside of series production, without programming
- Numerically controlled bandsaw machines, featuring the new Windows CE-based controller developed by MEP specifically for automatic machines
- User interface with 7" touch screen display and mechanical buttons for machine operating functions
- Infinitely variable cutting speed adjustable from 15 to 100 m/min via frequency inverter
- Material feed with stepper motor and ball screw
- mounted on counter-opposed ball bearings; single stroke 600 mm
- Repeatable for any length required
Crodofg E H Espfx Ag Deb
- Automatic monitoring of cutting load
- via a servo valve mounted directly on the cylinder
- Coolant tray integrated into the machine base
- Swarf removal brush
- Bi-metal saw blade for solid and profile materials
- Tools and operating manual including spare parts list
Iklan kecil
Jerman
11.023 km
Bandsaw - horizontal
MEPShark 281 CCS
Hubungi
Kondisi: baru, Cutting diameter: 250 mm
Saw band length: 2950 x 27 x 0.9 mm
Table height: approx. 800 mm
Band speed: 36/72 m/min
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 0.37 t
MEP Sawing Machine:
Saw band frame, vice assembly, and base made of durable cast iron
High-precision degree marking on the cast iron structure
Electrical system (with fully labeled wiring and 24 V low-voltage system)
Control handle IP 55 for manual cycles (where applicable)
Rotating chip brush for the saw band
Codpfx Agefg E H Is Djrb
Quick-approach closing unit with vice
Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left
Bi-metal saw band 2950 x 27 x 0.9 mm
Tools, operating instructions, and spare parts ordering manuals in the user’s language
SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight.
CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well.
Quick-adjust vice
Hydraulic converter for band tension display
Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base
In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).
Iklan kecil
Velen
11.245 km
Gergaji bundar aluminium
MEPCOBRA 352 MA
Hubungi
Kondisi: bekas, * Saw blade diameter: 350 mm
* Cutting capacity at 90° (round): 120 mm
* Cutting capacity at 90° (square): 105 mm
* Cutting capacity at 90° (flat): 180 x 70 mm
* Cutting capacity at 45° (round): 120 mm
* Cutting capacity at 45° (square): 100 mm
* Cutting capacity at 45° (rectangular): 135 x 60 mm
* Saw blade speeds: 1700 / 3400 rpm
* Total power requirement: 1.5 / 2.2 kW
* Machine weight: approx. 0.210 t
Credpsfc T Ufjfx Ag Dob
* Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m
Manual circular saw for cutting aluminum, capable of mitre cuts from 45° right to 45° left, with the saw head swiveling from 0° up to 45° to the left. On the Cobra 352 MA (with automatic vice), the vices close automatically when lowering the saw head.
• Roller-bearing turntable for rapid and precise mitre adjustment
• Screw locking system to fix the saw head in any angular position
• Automatic saw blade lubrication
• Clamping system consisting of two vices
• Saw head lock in the upper position
• Adjustable length stop for consistent cut lengths
• Vice opening: 180 mm
Iklan kecil
Velen
11.245 km
Gergaji bundar dingin
MEPFALCON 352
Hubungi
Kondisi: baru, Saw blade diameter: 350 mm
Cutting capacity at 90 degrees (round): 115 mm
Cutting capacity at 90 degrees (square): 100 mm
Cutting capacity at 90 degrees (flat): 130 x 80 mm
Cutting capacity at 45 degrees (round): 100 mm
Cutting capacity at 45 degrees (square): 85 mm
Cutting capacity at 60 degrees (flat): 90 x 80 mm
Clamping range: 130 mm
Rotation speed: 30 / 60 rpm
Saw blade dimensions: 350 x 32 x 2.5 mm
Total power requirement: 1.1 / 2.2 kW
Machine weight: approx. 0.22 t
Space requirement: approx. 1200 x 860 x 900 mm
Special offer 2026 including stand!
Manual mitre saw for mitre cuts from 45° left to 45° right.
Double ball bearing-mounted steel worm wheel
Saw blade shaft mounted on an eccentric made of spheroidal cast iron
Bronze gear with key and tapered clutch to ensure maximum power transmission to the steel worm wheel
Vice with adjustable guide rails
Adjustable anti-burr device (enables burr-free cutting)
Length stop
Crodpfxefmck Hs Ag Dob
Double return springs
Main safety switch
Emergency stop button
Speed selector switch
Electric coolant pump for blade lubrication and cooling (micro-spray device can be fitted)
Motor: 1.5/1.8 kW - 400 V
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Jerman
11.247 km
Bandsaw - Horizontal
MEPSHARK 332-1 CCS
Hubungi
Kondisi: baru, Cutting diameter 300 mm
Saw blade length 3320 x 27 x 0.9 mm
Blade speed 40/80 m/min
Total power requirement 1.5/1.8 kW
Machine weight approx. 670 kg
Csdpfjfg E H Tsx Ag Dorb
Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding.
Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V)
Electronic blade tension gauge with digital display
Manual vice with quick locking
Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory)
Electric coolant pump for blade cooling and lubrication
Chip removal brush
Adjustable precision stops for repeated cuts of equal length
Machine suitable for pallet truck transport
Bimetal saw blade for solid and profile material
Tools and operating instructions included.
Iklan kecil
Rödermark
11.160 km
Hydr. logam gergaji pita otomatis miring
MEPSHARK 331 NC 5.0 Spider
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: 562670-08-C, Penawaran 25488
Data teknis:
- Ukuran pita gergaji: 3320 x 27,0 x 0,9 mm
- Kecepatan pemotongan tanpa tingkat: 15 hingga 100 m/menit
- Ragum penjepit material hidraulis
- Penyesuaian sudut pemotongan: kiri hingga 60°, kanan hingga 45°
- Kapasitas pemotongan pada 90°:
- bulat: 280 mm
- persegi: 260 mm
- pipih: 330 x 260 mm
- Kapasitas pemotongan pada 45° kiri & kanan:
- bulat: 250 mm
- 45° kiri pipih: 270 x 200 mm
Cedoy E Hv Aspfx Ag Dorb
- 60° kiri pipih: 170 x 170 mm
- Penggerak: 400 V / 2,2 kW
- Sistem pendingin cairan
- Sikat pembersih serpihan
- Berat: sekitar 1.300 kg
- Kebutuhan ruang: sekitar P 1800 x T 1900 x L 1950 mm
Iklan kecil
Kanal
10.876 km
Gergaji dingin
Mep310 CNC HS
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Gergaji pita otomatis bekas MEP SHARK 310 CNC HS
Dimensi pisau: 4640x34x1,1 mm
Kecepatan potong pisau variabel: 15-115 m/menit
Kapasitas potong: bulat 310 mm, persegi 310x310 mm
Csdeyyuxnjpfx Ag Dorb
Penegang pisau otomatis
Penghapus serpihan otomatis
Perlengkapan tambahan: ragum vertikal
Berat mesin: 2200 kg
Mesin dalam kondisi sangat baik, akan diperiksa dan diservis sepenuhnya.
Iklan kecil
Jerman
11.023 km
Baustahlgittermatten-Biegemaschine
MEPMod. PRE 12 2v
Hubungi
Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Working height: 1035 mm, usable width: 6000 mm, max. usable length: 6000 mm, max. wire diameter: 12 mm, max. tensile strength: 650 N/mm², bending capacity (number of bars): Ø12 mm: 40 bars, Ø10 mm: 60 bars, Ø8 mm: 90 bars, Ø6 mm: 150 bars, Ø5 mm: 200 bars. Geometry/bending data: minimum leg between two angles: 50 mm (with bending finger Ø17 mm). Standard bending finger: No. 60, Ø40 mm. Number of programmable bending angles: 20. Memory slots: 100. Speeds: first speed - 45°: max. 5.8 s, 90°: max. 8.7 s, 180°: max. 13.7 s; second speed - 45°: max. 2.9 s (complete cycle forward/back), 90°: max. 4.4 s (complete cycle forward/back), 180°: max. 6.8 s (complete cycle forward/back).
Codpfxsy A Slwo Ag Dsrb
Mechanics/Hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves. Supplied without oil.
Operation/Control: Control panel with keyboard and numeric display, manual and automatic operation, foot pedal control, emergency stop button and emergency foot pedal. Installed power: 5.5 kW. Length: 6705 mm, width: 710 mm, height: 1035 mm, weight: 1220 kg. Oil tank capacity: 60 l. Electrical connection: phases: 3x6 mm², earth: 1x6 mm².
Equipment: Support frame with control cabinet and hydraulic unit, fixed and movable bending bars, standard spare parts kit, foot pedal (1x) + emergency stop foot pedal (1x). Documentation is available, inspection on site is possible.
Kami memudahkan pencarian untuk Anda: "mep tiger 350 sx"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.





























































































































