Beli Mikron Wf 51 C bekas (192)

Kondisi: baik (bekas), Tahun pembuatan: 1995, Die Maschine ist in gutem Betriebszustand. Steuerungseinheit: TNC 426 Itjdpjuzimnefx Aahsr

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Iodpfet Hw D Rex Aahotr Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 1,850 mm y-travel 1,400 mm z-travel 720/905 mm Control system SIEMENS SL 840 D Spindle speeds 15,000 rpm Itsdpfx Aaevxwuwohsr B-axis -20 / +120 ° Tool holder HSK-A63 Tool magazine with 45 stations Maximum tool length 365 mm Tool diameter with adjacent stations occupied 90 mm Tool diameter with adjacent stations free 130 mm NC rotary table 1,600 mm T-slots 12 Slot width 18H12 Slot spacing 100 mm Table load capacity max. 3,000 kg Max. table rotation speed 30 rpm Total power requirement 89 kW Machine weight approx. 26 t Required space approx. 7.00 x 6.20 x 4.15 m 5-axis machining center with Siemens SINUMERIK 840D control, BLUM laser, Renishaw, RotoClear, fire suppression system, 2x electronic handwheel, Steptec spindle, spindle oil cooler, ICS, high-pressure pump, Bürener coolant belt filter system, chip conveyor. The machine can be inspected under power.

Kondisi: bekas, Tahun pembuatan: 1995, Horizontal travel (X-axis): 750 / 1000 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain TNC 426 Machine weight approx. 6,500 kg Space requirement approx. 2,500 x 3,300 x 2,500 mm MIKRON VC 750/1000 – CNC Vertical Machining Center Travel distances: X-axis: approx. 750 / 1000 mm Y-axis: approx. 600 mm Z-axis: approx. 600 mm Table: Table size: approx. 1,080 x 580 mm Number of T-slots: 7 T-slot spacing: 90 mm T-slot width: 14 mm Max. table load: approx. 1,000 kg Isdpfxowm Rqys Aahetr Spindle: Spindle speed: 50 – 5,000 rpm Spindle taper: ISO 40 Spindle power: approx. 11 kW Tool changer: Number of tool stations: 30 – 36 Tool holder: ISO 40 Feed and rapid traverse: Rapid traverse X/Y/Z: approx. 15 m/min Control: Heidenhain TNC 426 Machine dimensions and weight: Dimensions (L x W x H): approx. 2,500 x 3,300 x 2,500 mm Weight: approx. 6,500 kg

Kondisi: bekas, ACCESSORIES - With Zellio SR3 automatic feeder - Tilting loading magazine No. 11 and vibrator - Piece diameter 2.50 to 12.5 [mm] Iedpsuhbqpjfx Aahstr - Piece length 0.30 to 30 [mm]

Kondisi: bekas, PLC control, electronic modules, PLC module, plug-in card circuit board, PCB, printed circuit board -Manufacturer: Mikron, electronic module PCB from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 Ijdpfxsrc Ilge Aahetr -Dimensions: 145/110/H55 mm -Weight: 0.4 kg

Kondisi: baik (bekas), Tahun pembuatan: 1999, Die Maschine ist in gutem Zustand. X 750 mm Y 400 mm Z 500 mm 10.000 U/min Itodpfjwx Rafex Aahsr

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Cutter speeds stepless: 0 - 1,500 rpm Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Itedet Hwxbopfx Aahjr Weight approx.: 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Kondisi: siap digunakan (bekas), Tersedia lima mesin milling ulir Mikron model lama: 3x mesin frais ulir hidrolik Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 dan 1x mesin frais ulir pendek Mikron 106.01. Pemeriksaan di lokasi dimungkinkan. Itedpfx Aasw Sxyxshjr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm Machine weight approx. 6,500 kg Required space approx. 3,900 x 3,500 x 2,700 mm Iodpfswmzgfex Aahstr MIKRON VCP 600 – CNC Vertical Machining Centre (Year of manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining centre, ideally suited for high-precision machining of complex workpieces. With its robust construction, powerful spindle and reliable Heidenhain control, it meets the highest standards for both single-part and series production. All details are provided without guarantee. Exact technical data available upon purchase. Control: TNC 426/430 Axis Travel X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot spacing: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool taper: HSK-A63 Tool Changer Number of tool stations: 30 Max. tool diameter: 90 mm Max. tool diameter with empty adjacent pockets: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Floor space required (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5.47.07.02, panjang pemakanan sumbu X: 600 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 450 mm, kecepatan rotasi (maks.): 6.300 rpm, jumlah slot dalam magazin alat: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Itedpewm I N Hefx Aahor Tool holder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Clamping force: 10,000 N Ejection force: 3,500 N Travel distances in automatic mode Longitudinal travel spindle feed (X-axis): 600 mm Cross travel spindle slide (Y-axis): 500 mm Vertical travel spindle slide (Z-axis): 450 mm Feed drive (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power level: 75 dB(A) Clamping table Table size: 530 × 900 mm T-slot quantity: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with safety enclosure: 3,000 kg Total weight with cover roof: 3,100 kg Ambient Conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Total installed nominal power: 15.8 kW Utilization and connection power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Kondisi: bekas, PLC control, electronic modules, PLC module, plug-in card PCB, printed circuit board - Manufacturer: Mikron, electronic module circuit board for h. TCD22 Ovp - Type: WW TCD 22 . 104.73.20.041 Iodsk Aua Nspfx Aahetr - Carton dimensions: 410/310/H65 mm - Weight: 0.6 kg

Kondisi: baik (bekas), Tahun pembuatan: 2015, Die Maschine ist in gutem Zustand, die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. X 1025 mm Y 560 mm Iedpfswx N Nfsx Aahjtr Z 600 mm Heidenhain TNC 620, 16.000 U/min, HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 450 mm, daya nominal (semu): 10 kVA, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 20.000 rpm, Heidenhain TNC530, diviser sumbu ke-4, spindle 12.200 rpm HSK 63, meja 850x530 mm, perjalanan 600x450x450 mm, penukar alat 30, berat 6500 kg. Iodpjw Dc Irofx Aahjtr

Kondisi: bekas, CNC control, operator panel, machining center operator panel, operating unit, operator panel, control unit - Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 Ijdpfxsrcnmwo Aahstr - Type: TCD 22 - DIN 8659 - Circuit board: WW TCD 22 operating unit 104.73.20.042 - Individual components: see photos - Dimensions: 480/240/H160 mm - Weight: 5.3 kg

Kondisi: baik (bekas), Die Teile auf dem Tisch sind nicht dabei. Sie sind rot markiert. Itodpewxdyxjfx Aahor

Kondisi: baik (bekas), Chain-type tool changer, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -Capacity: up to 22 tool holders -Taper: SK40 Itsdpfx Aaorb E E Nsher -Dimensions: 1200 x 1150 x H860 mm -Transport weight: 294 kg

Kondisi: bekas, CNC control system, operator panel, logic unit, path control unit Itjdpfopz Sf Eox Aaher - Manufacturer: Heidenhain, logic unit for path control - Model: LE 407 A 236 484 10 - Individual components: see photos - Dimensions: 480/330/H140 mm - Weight: 9.5 kg

Kondisi: bekas, Main spindle with drive motor, universal milling head, milling arbor, milling extension, angular milling head, upper support, compound slide, dovetail guide, tool slide, cross table Itjdjrc Ik Hjpfx Aahjr - Manufacturer: Mikron, upper support and tool slide from CNC milling machine Mikron UME 600 - Motor: Siemens 380V 3.7/5.25 kW, see photo of the nameplate - Speed: 1500/9000 rpm - Spindle head: SK40 taper - Dimensions: 1550/560/H735 mm - Weight: 555 kg

Kondisi: bekas, Auxiliary contactor, circuit breaker, miniature circuit breaker, main disconnector, load disconnect switch, power circuit breaker, power disconnector, auxiliary switch, main switch Itodpfsrc Ilnsx Aahsr -Manufacturer: Mikron, main disconnect switch/load disconnector from CNC milling machine Mikron UME 600 -Adapter: Heidenhain Type: 239 758 01 -Dimensions: 430/150/115 mm -Weight: 1.1 kg

Kondisi: bekas, PLC controller, power module, LT module, I/O module, regenerative feedback module, CNC controller, safety insert universal module, plug-in cards, circuit boards, control card, PCB -Manufacturer: Mattle Mikron, safety insert universal module circuit board from Mikron UME 600 CNC milling machine -Safety insert: Type SEMU TN 24VDC Iedpferb E Ewox Aahstr -PCB: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Tahun pembuatan: 2018, Kondisi: bekas, Computer monitor, display, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1" TFT industrial monitor 2363130 Ijdpfercnmzex Aahjtr -Dimensions: 400/320/100 mm -Weight: 3.1 kg

Kondisi: baik (bekas), Clamping table, clamping angle plate, T-slot table, rotary table, milling machine table -Manufacturer: Mikron, Milling machine table / T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T-slots: slot width 14 mm, slot spacing 63 mm Iedpfx Ajrbm Udoahjtr -Transport dimensions: 900/530/H390 mm -Weight: 248 kg

Kondisi: baik (bekas), Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, control unit, operator unit, operating panel, HMI panel, handheld terminal, hand control unit Iodporc Ikxofx Aahstr - Manufacturer: Mikron, hand control unit (handheld terminal) from CNC milling machine Mikron UME 600 - Connector: see photos - Dimensions for transport: 400/240/H95 mm - Weight: 1.1 kg

Kondisi: bekas, CNC control, operator panel, machining center operator panel, operating unit, control panel, operating panel -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -PCB: WW TCD 22 operating unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg Iedpfx Aasprb Dvshjtr