Beli Nozzle Centrifuge bekas (3.393)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 21.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190332, Perlengkapan: dokumentasi / manual, From July 1, 2025, used machines can also be taken into account for tax purposes with a special depreciation of 30% per year. 3-color or 2-color injection molding machine (the 3rd unit can be deactivated via software) (horizontal/vertical, plus 3rd in L-position with safety enclosure) ##### Can also be converted to 2-color operation ##### Immediately available from our Hannover warehouse Manufacturer: Arburg Model: 420C 1000-150/150/60 Year of manufacture: 2003 Machine number: 190332 Controller: Selogica Operating hours: only 21,200 h +++++Clamping unit+++++ Control: Selogica Clamping force: 1,000 kN / 100 tons Tie bar spacing: 420 x 420 mm Mounting platen: 795 x 795 mm Mold height: 300 mm Max platen distance: 950 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic ++++Injection unit 1 (150 assembly)++++ Screw diameter: 15 mm (highly wear-resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2,750 bar ++++Injection unit 2 (150 assembly)++++ Screw diameter: 15 mm (highly wear-resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2,750 bar ++++Injection unit 3 (60 assembly)++++ Lhjdpfxegrzh Eo Aahsr Screw diameter: 15 mm (highly wear-resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2,080 bar Extras 1 ALLROUNDER 420 C 1000-150/150/60 1 Vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping rails, manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pull 1 open nozzle 15 mm, wear-resistant, without heating band (1st inject. unit 150) VE-902/00 1 Technology level 2 – servo-controlled hydraulic system with two variable pumps for controlled machine movements, with position-dependent, controlled target ramps. Build-up of mold clamp force is programmable and regulated. The clamp force is servo-controlled by the second pump. Set-up force for the nozzle assembly is programmable. The set-up force is manually adjustable and electronically maintained. 1 Technology level 3 hydraulic system with 3 variable pumps for simultaneous movements of main axes and faster movements of secondary axes. For 2-component machines, as hydraulic system for the 2nd injection unit (requires technology level 2, VE 132/03) VE-130/40 1 Heating band for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into parting line with 2-component processing VE-136/02 1 Position-controlled screw with control valve at injection unit, incl. controlled back pressure, nozzle set-up force manually adjustable VE-561/20 1 Position-controlled screw with control valve for multi-component machines – for injection unit 2 VE-561/30 1 Injection unit 60 for horizontal injection into the parting line as the 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 - Injection unit 60 in L-position: assembly lowered by 70 mm, incl. special parting level full safety guard VE-907/00 1 Plasticizing cylinder kit 15 mm (without nozzle), with pre-positioned feeder and pressure reducing valve, in highly wear-resistant design with sintered metal check valve, (L-position) VE-908/00 1 Open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating band for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Technical Details Faceplate diameter: 1800 mm Swing diameter: 2000 mm Turning height: 1270 / 1120 mm Control: SIEMENS 840 D Max. workpiece weight: 5000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 - 320 rpm Crossrail adjustment: 400 mm Ram slide horizontal travel (X): -2770 / +2275 mm Ram slide vertical travel (Z): 1250 mm C-axis: 360° (0.001°) Milling drive: 37 kW Milling speed range: 10 - 3000 rpm Table drive power: 100 kW Torque: 31784 Nm Feed range (X/Z): 0.1 - 15,000 mm/min Total power requirement: kW Machine weight approx.: 55 t Space requirement approx.: m Additional Information Used CNC vertical turning lathe for turning, drilling, and milling operations The machine was only commissioned in 2011. CNC Control: Siemens Sinumerik 840 D Number of NC axes: 4 (X, Z, C, crossrail adjustment) Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram slide stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Main spindle speed range: 1.0 - 320 rpm Main spindle drive power: 100 kW Drilling-milling spindle: 37 kW Crossrail travel path: 2 steps of 200 mm each Total electrical connected load: 218 kVA Travels: X-axis: -1650 to +2165 mm Z-axis: 1250 mm Rapid traverse X/Z-axis: 15 m/min Number of tool magazine positions: 80 positions in the chain magazine, including 60 x HSK 100 and 20 x Capto C6 12-position disc magazine for turning toolholders and attachment heads Coolant unit with filtration and circulation system Chip conveyor Oil mist extraction system 1 x Pallet with jaw boxes, diameter 1800 mm 1 x hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads Lhsdpfxex Nn Sto Aaher 2 x measuring probes Several tool holders for turning tools Special features: Pallet changer with two stations, equipped with a faceplate Ø1800 mm and a six-jaw compensating chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is set in a pit. Condition Description: About half a year ago, the Carnaghi cross roller bearing was replaced. All Siemens components in the control cabinet were completely renewed at the end of 2023. Additionally, the machine features a probe for tool measurement and an external Renishaw probe for workpiece measurement. As a special feature, a probe is installed on the Z-axis (Z1 axis). This provides an accuracy and time advantage since the tool does not need to be removed for measuring. Currently, this probe is out of operation and should be overhauled before recommissioning. Furthermore, the machine features a Rotomors six-jaw compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Kondisi: bekas, Tahun pembuatan: 1978, panjang total: 3.400 mm, lebar total: 1.850 mm, tinggi total: 1.600 mm, de-hu-standard-spec Lsdpfxsx Nqdrj Aahshr

Kondisi: bekas, Tahun pembuatan: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area Drilling/Grooving mm: 0 x 800 / 0 x 800 Stroke of X axis mm: 750 Max. traverse speed of X-Y axes m/min: 25 DRILLING UNIT Vertical spindles: Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis): Number 2 (1+1) Horizontal spindles (along X axis): Number 1 Fixed grooving saw (direction): X Grooving saw diameter mm: 100 Max. saw thickness mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Grooving saw speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Compressed air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air speed m/sec: 20 Extraction nozzle diameter mm: 80+80 F10L Drilling Unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads: 1 in X direction with one bit, 1 double drilling head in Y direction (1 + 1 Drill chuck D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Workpiece positioning and drive of working unit A CNC-controlled suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along X and Y axes occurs on THK linear guides with transmission via reinforced toothed belts. Movement along Z axis is pneumatic on ball-bushing guides, with adjustable stopper positioning. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and operator language fault messages Programming - Programming via the CN - Automatic optimization of drilling operations - Possibility of panel zero-point shift - Possibility to store and import drilling programs via USB dongle - Ability to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the manuals - Graphical representation of unit configuration Vacuum suction cup "B-Power" Vacuum suction cup with double vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine operating interface Software: Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, min. 2GHz; multicore processor recommended - Memory: Minimum 1GB, 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (Package includes an installation DVD and a USB dongle) Xilog Maestro features Programming - Parametric, graphical programming Lsdpfxsvvi I Rj Aahshr - Assisted programming with graphic and syntax aids for drilling operations - Ability to create and store machining macros Integrated additional functions - Self-diagnosis and operator language fault messages

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood. Another machine now available (from stock in Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated pusher Screen perforation as desired (12 - 40 mm) Extraction nozzle diameter: 160 mm Weight approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Additional knife row + €995 net (28 instead of 14) - Surcharge for 4-sided segment floor + €2,170 net (prevents pusher blockage. Recommended for materials thinner than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net Lhedpfxed E R D Sj Aaher - Angled conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronised with the shredder) - Special bearing + €1,540 net (rarely needed. Enclosed, even more robust rotor bearing. Worth considering for screen sizes below 15 mm or high fines content. Not necessary if grease-lubricated about every 2 weeks during operation.) Raw material requirements: - The moisture content (oven-dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free trial using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder and we will document the test with photos and videos.

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Wave soldering machine with comprehensive features! A spare parts package worth approx. €20,000 is included in the sale and delivery! The system consists of the following components: - Seho wave soldering machine MWS 2340-F - Fluxer SelectFlux - Streamline conveyor system incl. lifts TECHNICAL DETAILS - PULSAR preheater: 2x convection and 5x pulsar preheating zones (3,300 mm length) - Soldering machine wetting length: 40 mm + 30 mm - Return conveyor level: elevated by 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline conveyor system incl. lifts Lhedpfxjx Nhhhs Aahsr - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Folding convection top heater - Fan speed monitoring for convection preheater - Standard soldering unit - Wide solder nozzle unit, 7 hole rows - Solder frame transport system incl. 2 lifts - Cooling tunnel in soldering machine return conveyor incl. time control - Solder frame lowering station - Replacement filter for condensate trap at machine inlet and outlet - Residual oxygen measurement with lambda probe - Nitrogen-saving circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external module) - Flow sensor for flux per spray head - Flux reservoir with connections - Replacement filters for external spray fluxer module - upper and lower system areas - Spare PC

Kondisi: siap digunakan (bekas), produsen pengendali: Touch-L, daya laser: 10.000 W, jarak pergerakan sumbu X: 6.280 mm, jarak lintasan sumbu Y: 2.070 mm, panjang total: 17.200 mm, lebar total: 6.300 mm, tinggi total: 3.360 mm, berat kosong: 21.500 kg, Opsi terpasang: - penukar nozzle otomatis - konveyor limbah Dimensi benda kerja: 6160 x 2035 mm Jenis Laser: LVD Perjalanan sumbu Z: 130 mm Kecepatan perjalanan: 140 m/menit Maks. ketebalan pemotongan baja: 25 mm Maks. ketebalan pemotongan inox: 30 mm Daya motor: 75 kW Ledpfjxqh Sgsx Aahjhr Meja geser: ya

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 35.000 h, jumlah sumbu: 3, This 3-axis CONCEPT LASER M3 Linear was manufactured in 2011. It features a robust power supply with a total consumption of 7.4 kW, supporting the laser system, IT systems, and control voltage components. The machine is indispensable for operations requiring compressed air and nitrogen, as it ensures consistent flow and pressure. Ideal for high-precision 3D metal printing. Contact us for more information about this machine. Machine Advantages Technical Machine Features • Machine connection: CEE plug, 400V 32A 6h, 3-meter cable • Compressed air: pressure: 7–8 bar, oil-free • Flow rate: 130 l/min • Machine connection: quick-release coupling NW 7.2, 3-meter braided hose • Nitrogen N2: pressure: 5 bar, purity: >2.5 • Flow rate: 100 l/min • Machine connection: hose nozzle with sealing cone - 60° cone, 3-meter braided hose Additional Information Power Supply: Supply voltage: 3P/N/PE AC 400V, ±10%, 50Hz–60Hz Circuit protection: 32A Power Consumption: Laser system: Max. 3.4kW Ledpfx Asx Nh Rcjahehr IT: 0.5kW Control voltage: 0.5kW NC (incl. axes): 1.0kW Extraction unit: 1.2kW Air conditioning unit: 0.8kW Total: 7.4kW

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 7.500 kN, Perlengkapan: dokumentasi / manual, Engel ES4550/750K-V (2000) Ljdpfx Aex Iu U Ejahjhr

Kondisi: bekas, Tahun pembuatan: 2018, en: Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMISABLE PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTELY PRECISE MACHINING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: EASY AND INTUITIVE TECHNICAL SPECIFICATIONS Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis) Number 2 (1+1) Horizontal spindles (along X axis) Number 1 Fixed groove saw (direction) X Groove saw diameter mm 100 Max. groove saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Air consumption Nl/cycle 90 Extraction requirement m3/h 1200 Extraction air speed m/sec 20 Extraction nozzle diameter mm 120 GENERAL FEATURESUniversal CNC drilling machine with fixed gantry work table and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with integrated groove saw in "X" direction Self-supporting frame Machine base in steel tube construction to provide a large base for the work table. The structure is positioned on 3 self-levelling feet. The electrical cabinet is integrated into the machine base. Central Bakelite support table "Easy Motion": - an MDF sector for through drilling, automatically swivelling away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller track to facilitate panel sliding - left and right stops - a manually adjustable central alignerIt is necessary to use the left and right stops to drill the two opposite panel sides horizontally in the "X" direction. Panel positioning along the X-axis by vacuum suction cups. Unit carriage This is a gantry structure in steel tube construction. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles- chuck D10 mm- spindle spacing 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 chuck D10 mm) - speed 3350 rpm- 1 integrated saw unit in X (max. diameter 100 mm) - saw blade speed 4300 rpm- motor power 1.5 kW - vertical pneumatic stroke per spindle 70 mm - horizontal pneumatic stroke of the drilling unit Positioning of the workpiece and drive of the working unit A CNC-controlled vacuum cup clamps the workpiece and positions it sequentially under the working unit during machining. X and Y axis movement on THK linear guides with reinforced toothed belt transmission; Z axis movement is pneumatic on ball-bushing guides with position stop adjustable via the working unit position. Positioning of the work units via state-of-the-art control and drive technology -CONTROL The control system was specially developed for industrial use. Ljdpfxjvwbp As Aahohr

Kondisi: bekas, jarak tempuh: 177.951 km, daya: 140 kW (190,35 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, pendaftaran pertama: 03/2017, kelas emisi: Euro 6, warna: perak, rem: retarder, jumlah tempat duduk: 31, Perlengkapan: ABS, pemanas parkir, pendingin udara,

Kondisi: bekas, Tahun pembuatan: 2004, panjang total: 3.350 mm, lebar total: 2.440 mm, tinggi total: 1.790 mm, Price: On request - Year of manufacture: 2004 - Documentation available: No - CE certificate available: No - Serial number: MC00073318 - Main motor power [kW]: 5.5 - Parallel fence travel [mm]: 1600 - Sliding table length [mm]: 3200 - Table width [mm]: 2350 - Saw blade bore diameter [mm]: 30 - Dust extraction port diameter [mm]: 100 - Controlled axes: Parallel fence - Electrically adjustable axes: Parallel fence - Options: Scoring unit - Scoring saw blade bore diameter [mm]: 23 - Spindle speed: - Min. spindle speed [rpm]: 1330 - Max. spindle speed [rpm]: 2870 - Voltage [V]: 400 Lhodpfx Ajx Nh Egsahor - Power consumption [A]: 18.46 - Fuse rating [A]: 32 - Power output [kW]: 7.7 - Transport dimensions: 3350mm x 2440mm x 1790mm (L x W x H) - Transport packages [pcs]: 1 Financial information: VAT: The indicated price is subject to VAT VAT / differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Kondisi: bekas, jarak tempuh: 141.498 km, daya: 96 kW (130,52 hp), pendaftaran pertama: 06/2020, jenis bahan bakar: diesel, berat keseluruhan: 3.140 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 6.140 mm, lebar total: 2.059 mm, tinggi total: 2.494 mm, panjang ruang muatan: 3.350 mm, Tahun pembuatan: 2020, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baru, Robust steel-grey cast iron construction High-precision format sliding table made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade tiltable to 45° Large squaring frame (960 x 600 mm) with extendable aluminum telescopic fence up to 2660 mm Ljdpfjiiynnex Aahohr Strongly ribbed, cast iron jointer tables, annealed and stress-relieved for decades of stability and flatness Helical-toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Max. cutting depth: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed rate: 7 m/min Max. cutting depth: 4 mm Extraction port diameter: 4 x 120 mm Cutterblock type: TERSA (3 knives) Cutterblock diameter: 72 mm Spindle speed: 5200 rpm Sliding table cutting length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Saw blade tilting: 90 – 45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and table: Format sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Max. shaping tool diameter (lowered/not lowered): 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Approximate machine weight: 560 kg INCLUSIVE OPTIONS - Handwheel with gravity numeric display for thickness table positioning - Sliding table length 2600 mm - Professional fences - TERSA planer cutterblock - Spindle moulder with reverse and forward rotation

Kondisi: bekas, en-bitumen-tank-specs-2024 Lhodpfx Ajx D A R Dsahor

Kondisi: bekas, Tahun pembuatan: 2001, Lebar potong: 3300 mm Panjang potong: 3350 mm Berat: sekitar 4000 kg Tonjolan mata gergaji: 100-(115) mm Gerobak gergaji: Kecepatan maju: 1–100-(1–130) m/menit. Kecepatan balik: 100-(130) m/menit. Mata gergaji utama: 400-(430) mm Motor: 7,5 - (11–13,2) kW Scriber: 215 mm Motor: 2,2 kW Penekan: Gerak cepat: 1–60 m/menit. Balik: 60 m/menit. Ekstraksi: Kecepatan udara: 30–35 m/detik. Konektor ekstraksi: 200 mm / 115 mm Udara tekan: Tekanan: 5–6 bar Konsumsi: 20–30 l/menit. Lokasi penyimpanan: Nattheim Lhedpfx Aaovvkqgjhor

Kondisi: bekas, Lini produksi minyak zaitun bekas dengan kapasitas output 7 ton/jam. Peralatan diproduksi oleh Pieralisi pada tahun 2004 dan saat ini masih beroperasi. Peralatan utama meliputi: - Pemisah daun - Mesin pencuci zaitun - Penghancur zaitun - Malaxer Panorama 700 liter - Malaxer Panorama 1000 liter Lodpfxjx Nim Ss Aahehr - Panel listrik - Dekanter sentrifugal Elephant S 470/2 - Filter vibrator untuk Elephant S 470/2 - Dekanter sentrifugal Jumbo 2 - Dekanter sentrifugal Major 3 - Filter vibrator untuk Major 3 - Separator 1500-2000 Daftar lengkap peralatan tersedia atas permintaan.

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, produsen pengendali: ESA veya LYNCA, jenis laser: laser serat, ketebalan lembaran (maks.): 30 mm, jarak pergerakan sumbu X: 3.040 mm, jarak lintasan sumbu Y: 1.535 mm, jarak gerak sumbu Z: 120 mm, kecepatan pemotongan: 150 mm/menit, akurasi pemposisian: 0,05 mm, daya: 6 kW (8,16 hp), STANDARD FEATURES - Robust frame and bridge structure designed to meet high-precision requirements - Engineered rigid machine construction (structural analysis performed) - Rack and pinion drive system - Fiber laser resonator (compatible with IPG / Nlight / Raycus) - Fiber laser beam transmission via fiber optic cable (zero optical consumable cost) - Precitec ProCutter laser cutting head with automatic focus - Motorized automatic focus system - Automatic capacitive height control sensor - Lower protection glass (protects against back-reflection and particles) - CNC-controlled dual shuttle table system - Rigid and rapid CNC-controlled table exchange - Advanced CNC control unit with touchscreen - Windows-based CNC operating system - Multi-language support - EtherCAT communication infrastructure - Program management based on part, job, and material - Fly-cut technology (continuous cutting without changing the cutting direction) - No-piercing thin sheet cutting technology - Piercing + cutting combination on thick sheets - Sheet recognition and alignment technologies - Referencing options - Multi-level password system for operator and maintenance personnel - Program loading and network connectivity via CNC - High-resolution internal machine camera system - Remote monitoring via computer and mobile devices - LED status indicators - Laser safety windows (blocking fiber laser wavelength) - Automatic nozzle cleaning system - Automatic head calibration - Filtered ventilation and fume extraction system - CNC-controlled filtration unit (manual / automatic modes) - Conveyor system for part and slag removal OPTIONAL FEATURES - Laser power options: 1 kW to 10 kW - Sheet recognition and nesting with automatic camera - CAD / CAM software (Libellula or Lantek) - Automatic / semi-automatic part nesting - Remnant sheet nesting capability - Advanced cutting simulation - Time and cost analysis module - Remote service and technical support infrastructure - High-capacity filter unit options - Automatic loading – unloading systems - Additional safety and monitoring packages TECHNICAL SPECIFICATIONS – 1530 MODEL - X Axis: 3040 mm - Y Axis: 1535 mm - Z Axis: 120 mm - Acceleration: 2.5 g - Max. Axis Speed: 150 m/min - Synchronized Speed: 210 m/min - Positioning Accuracy: ±0.05 mm - Repeatability: ±0.03 mm - Machine Weight: 16,500 kg - Max. Table Load Capacity: 1,500 kg - Table Change Time: 24 sec Cutting Capacities (Depending on Laser Power) - Mild Steel: max. 30 mm - Stainless Steel: max. 22 mm - Aluminum: max. 20 mm Assist Gas Pressure Values - Oxygen: 13 bar - Nitrogen: 25 bar - Air: 13 or 25 bar Average Power Consumption Lhodpfox Npl Uox Aahsr - 15 kW – 70 kW/hour (depending on selected laser power)

Kondisi: baru, Tahun pembuatan: 2025, Suction nozzle diameter: 300 mm Maximum air flow: 6,000 m³/h Nominal air flow: 5,089 m³/h Air flow monitoring: Differential pressure display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 dB Chip bag volume: 480 l Filter cleaning: motorized Motor power: 7.5 kW Extinguishing system: yes Machine length: 3,245 mm Machine width: 1,030 mm Machine height: 2,595 mm Lhsdopfat Nspfx Aaher Weight: 780 kg

Tahun pembuatan: 2003, Kondisi: baik (bekas), For sale is an Arburg 2-component injection moulding machine, model 420 C. The machine comes from a production facility that places great importance on maintenance and cleanliness. All servicing and repairs are carried out immediately by qualified personnel. Arburg 420C 1000-150/60; Clamping force: 1,000 kN Year of manufacture: 04/2003 Screw diameters: each Ø25 mm installed 9x mould heating circuits 2x hydraulic core pulls 1x pneumatic needle shut-off nozzle 9x temperature sensors 1x mould cavity pressure sensor Currently approx. 36,684 operating hours 1x spare cylinder Ø18 mm for aggregate 2 additionally available Lhjdpelwxpiofx Aaher Prices plus VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Trade-in or exchange possible! Machinery trade - purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your own? For further information or to contact us, please visit our website.

Kondisi: sangat baik (bekas), Brennschneiddüse, Schweißbrenner, Plasma- Brenner, Handbogen - Stechbrenner, Fugenhobel, Brennerzubehör, Brennerdüsen, Schneiddüsen, Brennschneidanlage, Brenner -Hersteller: Hypertherm, umfangreiches Sortiment Plasma- Brennerzubehör unbenutzt Ovp -Typ/Anzahl: siehe Fotos / Stückliste -Ring Elektrode: iht 6534-1-100 3 Stück -Preis/Abgabe: komplett -Transportabmessungen: 360/280/H165 mm Lsdpfx Ajw Ud Dbsahehr -Gewicht: 3,8 kg

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lhsdpfx Aaexyiilehjr Lokasi penyimpanan: Nattheim

Kondisi: bekas, Tahun pembuatan: 2001, Lebar pelat pantul: 4000 mm Tinggi pelat pantul: 1000 mm Dimensi luar: 4600 x 1500 mm 2 x 1,5 kW motor Aliran volum nominal total: 7000 m³/jam Konektor ekstraksi kanan dan kiri dengan diameter 300 mm Lokasi penyimpanan: Garbsen Lhedpfxovvizke Aaher

Kondisi: bekas, Tahun pembuatan: 2022, Additionally, freight €4,000.00 and installation and commissioning €5,000.00 Sanding Machine B Sand 5 with Partial Rotator Lhjdpfx Ajvvkipoahjr Mode of Operation: The panel is placed on the infeed table. It is conveyed into the partial rotator and centered. The panel is sanded in the sanding machine, once in forward and return direction. The panel is then rotated in the partial rotator. The second side of the panel is sanded in the sanding machine. Afterwards, there are two options: either the panel is moved onto the outfeed table and unloaded, or it returns to the infeed table and is unloaded there (the second option increases the processing time). Sanding Machine Equipment: - 1 upper sanding flap roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - 3 upper sanding discs to perfectly cut longitudinal and transverse wood fibers. Each with 1.5 kW; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Once the panel edges are detected, it follows the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate panel sanding. - All tools are controlled via frequency converters. - All brushes are equipped with quick-change sanding strips without the need to replace the hub. - The discs are fitted with air nozzles to optimize cleaning and cycle time. - Sanding discs feature a Velcro attachment system. - Feed rate and revolutions are controlled by PLC to prevent edge damage to parts. - High-quality sanding on 4 sides thanks to the machine’s consistent material removal. - Automatic and quick changeover of sanding units. - Constant pass-through height; PLC and industrial software allow integration into a finishing line. - Infinitely variable speed for discs, brushes, and feed, based on frequency converter full equipment. - Right/left rotation of discs and brushes with different abrasives. - Individually driven adjustment for discs, rollers, and belts. - Additional setting for brushes and discs to optimize abrasive usage and adjust sanding pressure on surfaces. - Robust frame made from steel tubing guarantees excellent rigidity, stability, and flatness. - Planed top bed ensures optimal parallelism of the working surface for the sanding discs. - All sanding unit carriages utilize linear recirculating ball guides for high load capacity and precision. - Motorized feed belt controlled by frequency converter, 0.55 kW. - Machine doors are equipped with safety interlocks. - Machine doors with viewing windows allow observation of workpieces during processing. - Under the sanding units, there are Ø 80 mm rubber-coated pressure rollers to secure workpieces during operation. - Low operating costs thanks to individual replacement of the flaps. - Low operating noise due to the closed machine housing. - All units have extraction housings with corresponding extraction connectors. Cover plate with extraction socket. - Fully enclosed machine housing for a clean working environment.

Kondisi: bekas, Tahun pembuatan: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis travel length: 200 mm. Clearance height: 180 mm. Ledpfew Aifzsx Aahjhr The machine base is a monolithic construction made from thick-walled steel, reinforced throughout the machine bed with welded-in triangular plates for exceptional stability. The triangular design, particularly with a broad base for load-bearing components, is key to ensuring long-term precision and rigidity. The machine layout allows users optimal workflow with minimal space requirements. This chassis design provides the machining unit with a balanced and secure foundation, enabling outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on precision-ground prism guides using recirculating ball carriages. The working unit, mounted on it, also travels on prism guides and recirculating ball carriages for robust performance. Description of aggregates and standard accessories Drilling unit: Drill head with 10 + 4 spindles: · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm centering · Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): · Tool holder: HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) · Clockwise/anti-clockwise operation · Ceramic bearings · Included: 4 tool holders (right-hand), without collet Tool changer: · Lateral tool magazine, 7-fold (TR7), fully enclosed against chip contamination · 7 tool slots for HSK 63F tool holders, arranged in a row · Max. tool diameter: D=120 mm · Max. weight per tool holder: 4.5 kg · Max. total tool weight (TR7): 20 kg · Angle heads can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collets 3-20 mm (ER32) · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table: The work table is designed to provide the operator with maximum freedom of movement. The vacuum quick-clamping system allows for highly flexible, precise positioning and optimal workpiece holding. · 4 supports, 900 mm, steplessly manually adjustable in X · 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) · 2 stops in X (left/right) · 1 stop in Y per support (6 in total) · Retractable reference stops, CNC-controlled · Includes: 4 plug-in adapters for vacuum cups · Standard pendulum processing (2 working zones) Axis movement: The X, Y, and Z axes are driven via precision-ground recirculating ball screws of the highest accuracy. The X-axis ball screw is centrally located for maximum performance.