Beli Pemotong Penggilingan Prism bekas (13.810)

Kondisi: baru, Tahun pembuatan: 2025, Cutting speed: 35 m/s Grinding height: 210 mm Workpiece length / mm Machine weight: approx. 210-260 kg Space requirement: approx. 1100 x 760 x 860 mm The G115 surface grinder is a compact grinding machine designed for machining the periphery or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With appropriate fixtures or shaped grinding wheels, inclined or contoured surfaces can also be machined. This machine is ideally suited for small businesses, maintenance workshops, DIY workshops, laboratories, teaching demonstrations, etc. TECHNICAL DATA Maximum stock removal: not greater than 0.03 mm Maximum grinding wheel linear speed: 35 m/s Table dimensions: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm T-slot (table): 1-12 mm Grinding wheel outer diameter × bore × thickness: 180×32×13 mm Spindle motor: 550 W/220 V Vertical handwheel feed interval: 0.025 mm Lateral handwheel feed interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. Grinding head runs smoothly. Compact design and low noise operation. A working enclosure is available separately. The machine is lubricated with a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. (Special accessories must be purchased separately.) Kjdpjvuuvkofx Aa Njdg PRODUCT INFORMATION: At the proximal end of the main spindle, the radial run-out of the taper bore axis is 0.01~0.02 mm at a distance of 100 mm.

Kondisi: bekas, Tahun pembuatan: 1979, Grinding diameter: 630 mm Grinding length: 4000 mm Centre height: / mm Machine weight approx. 32,000 kg STANKO Cylindrical Grinding Machine 3M194 / 630 x 4000 mm (MET.1405) Technical Data: Grinding dimensions: 630 x 4000 mm Weight: 32,000 kg HS Code: 84602910 Kedpfx Aajvm Dzao Nedg Experience the precision of the STANKO Cylindrical Grinding Machine 3M194 with dimensions of 630 x 4000 mm and reference MET.1405. Featuring a substantial weight of 32,000 kg, this robust machine guarantees stability and reliability in your machining operations. The HS Code 84602910 classifies it according to international standards for quality and performance. The 3M194 does not only stand out for its impressive size but also for its advanced technology, ensuring first-class results. Thanks to its dependable design and precise performance, this cylindrical grinding machine is ideal for processing a wide variety of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for companies aiming for the highest quality standards in metalworking. Rely on proven STANKO technology to optimise your production processes and achieve outstanding results. Invest in the future of your manufacturing with the STANKO Cylindrical Grinding Machine 3M194 – the perfect combination of performance, precision, and reliability. Contact us today to learn more about this exceptional grinding machine and discover how it can meet your production requirements.

Tahun pembuatan: 1998, Kondisi: bekas, X travel // mm Kdodpfoig A Erox Aa Neg Y travel // mm Z travel // mm Total power requirement / kW Machine weight approx. 950 kg

Kondisi: bekas, Taper of the milling spindle / Collet diameter / Speed range (rpm) Kodel Ichvopfx Aa Njdg

Kondisi: bekas, Bandwidth / mm Band length / mm Band speed / m/min No data available... Kdsdewgi Taopfx Aa Njg

Kondisi: bekas, Tahun pembuatan: 1994, x-travel / mm y-travel / mm z-travel / mm total power requirement 2.3 kW Ksdpsv T Nthjfx Aa Nodg incl. hydraulic vice

Kondisi: belum diuji (bekas), x-travel 850 mm Ksdpfxjud Illj Aa Nodg y-travel 440 mm z-travel / mm Control: TNC 355C Function: Not tested Operating hours: 42,427 h

Kondisi: bekas, schleifscheibendurchmesser-anzahl-der-stationen-tischflaeche Kdsdpfx Aajx Ddaye Nog

Kondisi: bekas, Tahun pembuatan: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia Max. workpiece weight 60,000 kg Control for tool magazine/tool changer: Siemens Spindle speed 6.3 - 4,000 rpm Kedpfsu I E Emex Aa Nodg Clamping surface 2500 x 4500 mm Magazine capacity 48 pcs. Tool holder SK50 Clearance between uprights 3700 mm Rapid traverse 30,000 m/min Total power requirement 63 kW Machine weight approx. 150 t Space requirement approx. 16.8 x 10.3 x 7.9 m

Kondisi: bekas, Taper of milling spindle / Collet diameter / Speed range / rpm Kdedpfxohprk Hj Aa Neg For data, see images!

Kondisi: bekas, Taper of the milling spindle / Collet diameter / Speed range 1500 rpm Kdodpjhwt Elefx Aa Njg

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface finishing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the media. Optional Accessories - Pneumatic sound enclosure - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing pipe (various types) The images are for reference only. Optional accessories are available at an additional cost. Kedpfx Aon Smbrja Njdg

Kondisi: bekas, Tahun pembuatan: 2000, de-hu-01 Ksdpfx Aexmaqyja Nedg

Kondisi: bekas, Tahun pembuatan: 2001, drehdurchmesser-mm Kdedsx Tu Suopfx Aa Nog

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 340 mm, lebar penggilingan: 170 mm, tinggi total: 730 mm, panjang total: 930 mm, lebar total: 780 mm, The G115 surface grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or profiled grinding wheels, it can also handle inclined or contoured surfaces. This machine is ideally suited for small businesses, the maintenance industry, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum stock removal: no more than 0.03 mm Maximum peripheral speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal stroke of the worktable: 340 mm Cross stroke of the worktable: 170 mm Table T-slot: 1-12 mm Grinding wheel outer diameter × bore × thickness: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel graduation: 0.025 mm Lateral feed handwheel graduation: 0.02 mm Kdodoxb Uq Djpfx Aa Nog Net / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packaging dimensions: 1100×760×860 mm The worktable can be moved forward and backward as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the machine. Smooth-running grinding head. Compact design and low noise emission. Work enclosure available separately. The machine is lubricated via a manual oil pump. Lubrication requires only pulling out the handle. If you require special accessories to improve work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: At the proximal end of the main spindle, the radial runout of the taper bore axis is 0.01~0.02 mm at a distance of 100 mm.

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Kdedoxwdygspfx Aa Njg Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of metallic and non-metallic workpieces. These machines feature a large screening surface and allow for easy separation of workpieces from abrasive media. Optional Accessories - Pneumatic sound enclosure Kedpfx Aaen Smclj Nsdg - Pneumatic flap control - Frequency converter - Dosing pump - Solenoid valve - Stand for control panel - Rinsing tube (various types) The images are for reference only. Optional accessories are available at an additional cost.

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm Kdjdpfx Aajv H Erts Njg Control HEIDENHAIN TNC 360 Total power requirement / kW Machine weight approx. / t Space requirement approx. / m

Kondisi: bekas, Tahun pembuatan: 2002, X-axis travel 560 mm y-axis travel 270 mm z-axis travel 340 mm Table clamping surface 1000 x 230 mm Spindle taper SK40 Total power requirement 4 kW Machine weight approx. 1.5 t Space requirement approx. 1.5 x 1.5 x 1.6 m Kedpfsv H Eryex Aa Nedg

Kondisi: bekas, de_hu_001 Ksdsv N Rccspfx Aa Njdg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: laser serat, produsen sumber laser: MAX Photonics, daya laser: 1.500 W, ketebalan pelat baja (maks.): 15 mm, ketebalan maksimum lembaran baja tahan karat: 6 mm, tebal plat aluminium (maks.): 6 mm, ketebalan lembaran kuningan (maks.): 4 mm, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: air, sambungan udara terkompresi: 8 batang, berat keseluruhan: 2.800 kg, Perlengkapan: Penandaan CE, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Laser cutting machine with 3kW fiber laser Our objective is to offer highly precise, long-term stable, and yet cost-effective laser machines. Our machines are ideal for workshops and repair shops. A carefully developed cutting parameter library is included in the scope of supply, as well as first-class service. The perfect cost-effective entry into laser cutting technology: - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Only approx. 3.0 x 3.0 meters installation footprint - Top quality—book a viewing appointment now! Cutting ability: - Mild steel sheets up to 22 mm Kdodpfx Aaoyacw Re Neg - Stainless steel sheets up to 12 mm - Aluminum sheets up to 8 mm - Travel range: approx. 1300 x 1300 mm - Support table size: approx. 1300 x 2500 mm (suitable for a full medium-format sheet) - German-language machine control - Manual front door - Comprehensive collision protection measures - Large front window for process observation - Automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter file - Incl. nesting module - Very easy to operate - Powerful laser chiller Sales exclusively to commercial customers. Delivery / consultation / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.2 m Height: 2.3 m Length: 3.3 m Total weight: approx. 3,000 kg Leasing or hire purchase available via our financing partner. Need a different laser power, table type, or table size? Not a problem. We would be happy to provide you with a suitable offer. Unsure which laser power suits your application? We will gladly carry out cutting trials according to your requirements. Numerous options available—laser power from 0.5 kW up to 20 kW.

Kondisi: baru, en Kjdpfx Aasx U Elne Njdg

Kondisi: baru, Condition: New Delivery time: approx. 12 – 14 weeks after order Country of origin: Turkey Price: €174,688 Leasing rate: €3,301.60 Laser power: 3 kW Manual table / Shuttle table: Manual table Max. sheet thickness – Mild steel: 16 mm Max. sheet thickness – Stainless steel: 8 mm Max. sheet thickness – Aluminium: 8 mm Max. sheet thickness – Copper: 5 mm Max. sheet thickness – Brass: 8 mm Cutting area: 3060 x 1530 mm X-axis: 3060 mm Y-axis: 1530 mm Z-axis: 140 mm Max. sheet size: 3048 x 1524 mm Max. sheet weight: 160 kg/m² Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm The HD-FO is our compact entry-level model. Control system, laser source, and cooling unit are fully integrated into the machine to minimize the overall dimensions. The manually extendable table is pulled out laterally for loading and unloading. The cutting head features automatic focus adjustment. This makes the machine particularly economical, fast, and very user-friendly for production operations. The system comprises the following components: - Manual loading and unloading table - Enclosed cutting chamber with safety glass - CNC graphical control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - Latek CAD/CAM software for programming and optimized material utilization (nesting) - Positioning laser - Sheet checking system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Air conditioning for the control cabinet - Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW Mild steel S235 20 25 Stainless steel 10 15 Kdedpfx Aaex U Elhs Nsg Aluminium 12 20 Copper 6 10 Brass 10 12 OPTIONS: - Extraction unit with filter - Shuttle table

Kondisi: baru, en-GB Ksdpfx Aajx U Elbe Njdg

Kondisi: baru, Tahun pembuatan: 2024, Condition: new Year of manufacture: 2024 Stock number: 2517 Delivery time: immediate, subject to prior sale Country of origin: Germany Price: €36,720 Leasing rate: €701.35 In stock: 1 Working area: 1500 x 3000 mm Plasma power source: Hypertherm Powermax 125 Max. sheet thickness - mild steel: 25 mm Max. sheet thickness for pierce cutting - mild steel: 25 mm Max. sheet thickness for separation cut: 57 mm Recommended sheet thickness (unalloyed steel): 25 mm Current: 125 A Rapid traverse speed: 24 m/min Repeatability: 0.1 mm Max. table load: 400 kg/m² Length: 3560 mm Width: 1960 mm Height: 1500 mm Weight: 650 kg DEMONSTRATION MACHINE Compressed air operated plasma source: HYPERTHERM Powermax 125 CNC workbench software (external PC not included) Automatic height control via arc voltage Setup laser Precision linear profile rail guidance (HiWin) Backlash-free HTD timing belt Driven by stepper motors Robust frame construction Individually replaceable slat support Water tray as spark catcher Manual controls for convenient positioning and setup at the workpiece Operating manual in GERMAN Equipment in accordance with CE regulations INCLUDING THE FOLLOWING OPTION: Kodpfx Aewva Iaja Nsdg Extraction bridge (prepared for extraction connection DN160mm)