Beli Pengeboran Tailstock bekas (2.598)

Kondisi: baru, Baru/Tidak Terpakai PYRO-VIS II 9064DF Viscosifier – Jumlah 920 x 25kg Karung Ihsdpfxsx H Szme Aa Njt Biaya pembelian asli $388.626,40. Viscosifier yang digunakan untuk pengeboran adalah aditif penting pada fluida pengeboran dan bahan kimia yang ditambahkan ke lumpur berbasis air, minyak, atau sintetis untuk meningkatkan kemampuan pengangkutan serbuk bor, menjaga tekanan yang benar, dan mengurangi kehilangan fluida.

Kondisi: baik (bekas), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Isdpjd Tticjfx Aa Neht Tiltable: 90° Dimensions (LxWxH), approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Article no.: WW12214

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Universal milling and drilling machine Make: KUNZMANN Model: WF 7/3 Year of construction: 1997 Technical Specifications Manufacturer: Kunzmann Model: WF 7/3 Year of manufacture: 1997 X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Clamping surface: 800 x 425 mm T-slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Vertical quill stroke: 60 mm Head swivels both sides: 90° Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (incl. control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating manual - Enclosure - Coolant system - Hydraulic tool clamping Iedpfxowhm Sij Aa Neht All information subject to verification. A demonstration is possible at any time in our showroom.

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 5.834 h, 2008 | Delmag SR 25 BT / RH 18 mounted on Sennebogen SR25 with ABI MDBA 3500 Ground Improvement Device | Drilling Rig | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220,000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfections ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine for concrete pile drilling, ground improvement and vibro compaction. Carrier unit: Sennebogen SR25BT (year 2008) with Delmag RH18 drilling leader attachment (year 2009). Drill table stroke: 12.50 m, overall height: 19.91 m. Outreach: 3.165 – 4.00 m. Feed winch, freewheel winch for supply, auxiliary winch, rear platform. Drill table SHT25. THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, THIS IS A GROUND IMPROVEMENT ONLY MACHINE, Drill gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic positioning. Hydraulic telescopic undercarriage with width from 3.0 m to 4.40 m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drilling tools and drill accessories available separately. Also available: mobile mixing plant by MAT, consisting of mixing tank (capacity 20 m³/h), feed auger, agitation tank (capacity 4,000 l) and plunger pump with remote control. The condition of the machine reflects its operating hours. At the time of inspection in 2023, the machine was operating without any issues. As of October 2024, storage damage occurred to valves, control unit and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine exhibits age-, operating-hour- and application-related wear on pins and bushings as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. It was used with 55 and 80 paddles. After servicing and repairing the storage-related issues, the equipment is ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Ijdpsx Uyzqjfx Aa Noht Tip: Search for reference “33244 Equippo” for more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: sangat baik (bekas), Dijual steady rest berat untuk mesin bubut dengan pergerakan pinola manual dan pengunci. Terbuat dari besi cor dengan konstruksi sangat kokoh – ideal untuk mesin bubut konvensional berukuran besar. Kondisi sesuai foto – pinola bergerak lancar, tidak ada kelonggaran pada dasar, permukaan pemandu dalam kondisi baik. Cocok untuk modernisasi atau sebagai basis untuk rekonstruksi mesin. Parameter: • Diameter pinola: 100 mm • Panjang pergerakan pinola: sekitar 320 mm • Diameter lubang selongsong: 44 mm • Penggerak manual: engkol + tuas pengunci • Basis dengan pemasangan baut • Berat: perkiraan 70–90 kg Pengiriman dengan palet atau pengambilan langsung dimungkinkan. Ihodpfow Rdl Rsx Aa Njt

Tahun pembuatan: 1970, Kondisi: baik (bekas), gewicht-3t-bohrwerke-bis-130-160-mm Iodpjx Emv Ajfx Aa Njht

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Mesin Frais Universal TOS FNGJ 32 Tampilan digital Heidenhain 3 sumbu Tahun pembuatan: 1999 Perjalanan sumbu: X 600, Y 400, Z 400 mm Rentang putaran: 40 – 2000 rpm Dengan perlengkapan berikut: - Meja sudut tetap, permukaan penjepit 800 x 400 mm - Kepala frais vertikal - Pinol bor yang dapat ditarik keluar - Berbagai dudukan alat SK 40 - Perlengkapan pelindung - Wadah serbuk logam - Lampu mesin - Pompa pelumasan sentral otomatis untuk sumbu X, Y, Z - Sistem pendingin Ihedpfxoxc It Io Aa Not - 4 pcs alas mesin

Tahun pembuatan: 2011, Kondisi: bekas, Purpose of use: Construction Serial number: 110245xxxx Please contact ATS Norway for more information. Please reference number upon inquiry: 20555 Specifications: Year of manufacture: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily operation) New chains on the tower Undercarriage: see photos for condition Iodpfx Aaewph Egj Noht Boom rotor was replaced about a year ago (cost: EUR 21,000) Oil leakage underneath the drilling unit Front chains on the tower are damaged and need to be replaced Hammer is not included in the scope of delivery Video available Delivery by arrangement Description: Gemsa Gemrok 45 SDKJM drilling rig, year 2011. The machine is equipped with new tower and bearing chains. The boom rotor was replaced around a year ago, representing an investment of EUR 21,000. There is oil leakage underneath the drilling rig, and the front tower chains are defective and must be replaced. The unit is currently in daily use, so operating hours may increase. A video is available on request. Delivery upon agreement. Operating hours: 7,200 Own weight: 11 Model: Gemrok 45 drill rig. SEE VIDEO

Kondisi: baik (bekas), Tahun pembuatan: 1981, 10447 Ihjdpfx Aox Sw Ezja Not

Kondisi: baik (bekas), Tahun pembuatan: 2020, Kami menawarkan untuk dijual mesin posisi pengelasan Sideros Syncrolift SLC 60 dalam kondisi kerja yang baik (tahun produksi 2020). Ini adalah mesin industri yang andal dan berkualitas tinggi, namun karena restrukturisasi produksi, kami tidak lagi memiliki ruang untuk alat ini. Ihedpfxjx U Af Ee Aa Njt Fitur utama: Berat maksimum benda kerja: 6.000 kg Teknologi Syncrolift – pergerakan vertikal yang halus dan tersinkronisasi Kualitas pengelasan yang konsisten dan dapat diulang bahkan pada komponen berat Perawatan minimal, bahkan pada penggunaan yang intensif Cocok untuk industri logam, rekayasa mesin, dan pengelasan presisi ⚠️ Perangkat menunjukkan tanda penggunaan, tetapi sepenuhnya berfungsi dan siap digunakan segera. 📞 Hubungi kami sebelum orang lain lebih dulu!

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de Ihedpex Uplxsfx Aa Net

Kondisi: bekas, Tahun pembuatan: 1996, Lintasan x 850 mm Ihjdpfx Aouxfz Asa Njt Lintasan y 630 mm Lintasan z 500 mm Kontrol Heidenhain Kebutuhan daya total 16 kW Kebutuhan ruang sekitar 5 x 4,2 m

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1996, Universal tool milling machine KUNZMANN WF 4/3 Equipped with 3-axis Heidenhain digital readout Year of manufacture: 1996 Travel distances: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm Including the following accessories: Rigid angular table, 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axes Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axes Machine lamp 4 machine feet Coolant system Operating manual Ihedpfeq Ulucsx Aa Not THE MACHINE WAS USED EXCLUSIVELY FOR APPRENTICE TRAINING!! THE MACHINE IS IN GOOD CONDITION!!

Tahun pembuatan: 1999, Kondisi: bekas, 11049 Ihedpfoxlnlijx Aa Net

Kondisi: sangat baik (bekas), Tailstock, counter bearing for dividing head, indexing device - Centre height: 485 mm - Taper: MT4 Ihjdjwxayhjpfx Aa Nst - Spindle stroke: 100 mm - Dimensions: 480/280/H550 mm - Weight: 73 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for the simultaneous processing of two panels and doubling productivity. The machine is designed for furniture manufacturers seeking speed, precision, and reliability in a compact footprint. Highlights: - 2 independent workstations (1200 + 650 mm), each with its own computer and dedicated processing units. - Optimized drilling blocks: up to 19 vertical drills plus horizontal drills on X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air cushion tables for panel handling without scratches. - Automatic dimension detector with alarm and compensation for panels. - Servo-driven clamps and automatic lateral alignment system for maximum accuracy. Iodpfxjxcwmqj Aa Neht - Advanced software + SYNTEC CNC control with user-friendly interface and support for MPR, DXF, BPP, PDX, XML files. - Barcode reader for integration into automated production flows. - High safety: side sensors, emergency stop, cable protection. Technical data: - Panel dimensions: Length 200–3000 mm / width 30–650 mm / thickness 10–60 mm - Max. traversing speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW - Weight: 6,300 kg - Machine dimensions: 6620 × 4620 × 2378 mm - Power supply: 380V / 50Hz / 3 phases Fields of application: - Medium and large series furniture production - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single clamping User benefits: - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Integration into smart manufacturing lines: barcode reader, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling machines

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1984, Mesin Frais Universal DECKEL FP 3 Dengan tampilan digital aktif 3 sumbu Heidenhain TNC 11 Tahun pembuatan: 1984 Perjalanan sumbu: X 500, Y 300, Z 400 mm Rentang putaran: 25 – 2500 rpm Dengan perlengkapan berikut: Meja sudut tetap 850 mm x 400 mm area penjepitan Meja putar berputar Ø 450 mm dengan cakram pembagi Kepala slotting Ihodpfx Aaoxuh Rdo Not Kepala milling vertikal yang dapat digeser Kepala bor yang dapat ditarik keluar Feed kontinu melalui potentiometer Berbagai arbor frais SK 40 / S22 x 2 Wadah serpihan Pompa pelumasan sentral otomatis untuk sumbu X, Y, Z Lampu mesin Sistem pendingin 4 buah alas mesin Petunjuk pengoperasian

Kondisi: bekas, Tahun pembuatan: 2004, Purpose: Construction Serial number: 04085xxxx Please contact ATS Norway for more information. When making inquiries, please provide reference number: 15082 Specifications: Model year: 2004 Operating hours: approx. 10,000 hours (hour meter has stopped) Chassis: see images Track width: approx. 40 cm Equipped with winch Includes Dynaset generator Service history: Maintained both by the owner and in a workshop Available immediately Dimensions: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates the machine has approx. 10,000 hours. The engine was replaced 2 years ago and has only run for 500 hours since installation. Drills 193 mm diameter holes; included accessories comprise one drill and 120 meters of rods ready for immediate use. The machine is fitted with a 4-cylinder Deutz engine that has only 500 operating hours since replacement. The machine is ready for shipping and operation. Please contact us for further information or to arrange a viewing! Operating hours: 10,000 Ihodsvg Nt Ijpfx Aa Net Own weight: 12,600 kg Model: 55S

Kondisi: baik (bekas), Tailstock, Counter Support for Indexing Head, Dividing Apparatus - Centre height: 120 mm Ihsdob Hbxdspfx Aa Nst - Height: adjustable - Taper: MT2 - Drawing available in the photos - Dimensions: 170/100/H130 mm - Weight: 6.4 kg

Kondisi: bekas, en-Tamrock_DHA_400S_Drilling_Rig_For_Sale_Not_New_Construction_R eference_20517_specs_and_description Ihsdpfx Aswph D Aoa Nst

Kondisi: baik (bekas), Tailstock, counter bearing for dividing head, indexing device - Centre height: 110 mm - Drawing: see photos Ihjdpfxjd N Uyrs Aa Net - Dimensions: 180/95/145 mm - Weight: 4.2 kg

Kondisi: baik (bekas), Tailstock, counter bearing for dividing head, indexing device - Height: adjustable - Mount: center - Dimensions: 245/280/H200 mm Ihodpfx Aaodna Acj Njt - Weight: 28 kg

Kondisi: baik (bekas), Tailstock, counter bearing for dividing head, indexing device -Center height: 135 mm -Height: adjustable -Taper: MT2 Ijdpfjd Aghhsx Aa Neht -Drawing: see photos -Dimensions: 240/115/H140 mm -Weight: 11.8 kg

Kondisi: baik (bekas), Tailstock, counter bearing for dividing head, indexing device, lathe - Tailstock: Center height 150 mm - Dimensions: see photos - Overall size: 340/200/H260 mm - Weight: 20.4 kg Iodpfx Aajwuq N Ej Njht

Kondisi: baik (bekas), Multi-spindle drilling head, multi-spindle drill head, drilling gearbox - Manufacturer: Perske, multi-spindle drill head with drive Ihjdpfx Aovmw H Aoa Njt - Drill head: 18 spindles - Drill spacing: 32 mm - Stroke: 50 mm - Drive: DSB 1306/2, 1.8 kW, 2800 rpm - Collets: Ø10 mm - Quantity: 2x multi-spindle drill heads with drive available - Price: per unit - Overall dimensions: 800/200/H575 mm - Weight: 67 kg/unit