Beli Preset Counter bekas (3.090)

Kondisi: baik (bekas), Presetting device, tool presetting device, milling tool presetting device - Presetting device for: milling tools - Maximum hob diameter: 500 mm - Maximum cutter height: 500 mm - Dimensions: 800/400/H1600 mm Dedpfx Aisdthyyjrouu - Weight: 242 kg

Kondisi: baik (bekas), de.1 Dsdpfx Aiswu R Alorouu

Kondisi: baik (bekas), Tahun pembuatan: 2013, 1 used tool presetting device Manufacturer: DMG Model: Microset Vio 210 Duedpfeqzgw Aox Aireu Year: 2013 Serial No.: 99510021418 Measuring range X-axis: 410 mm Measuring range Z-axis: 465 mm Includes workbench, subtable (1,400 mm wide), integrated telescopic drawer cabinet (5 drawers), with 15" Terra monitor, keyboard, mouse, Dymo 450 label printer.

Tahun pembuatan: 2001, Kondisi: bekas, de-1 Dsdpfx Asxxl Saeireuu

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), In upright design, heating surface: 34m², pressure: 12.7–14.3 bar, capacity: 2000 kW, diameter: 505 mm, length: 4590 mm, weight: 650 kg, with documentation; the counterflow heat exchanger was only in operation for one winter. Dsdpfxei Dx R Ts Airouu

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Dimensions (LxWxH) approx. 1,700 x 950 x 1,700 mm Weight approx. 1,300 kg Machine number 833, Dujdev Um Rtjpfx Aireu Digital display Kelch PICO Version A 23, Ground clamping surface 1800 x 520 mm, Clear width in passage (portal) 740 x 320 mm Tool carousel Ø 700 mm with 4 tool stations, 3 installed tool holders.

Kondisi: bekas, - Dimensi: 360 x 525 x 660 mm - Sistem satu rasa - Panel samping baja tahan karat - Sistem distribusi pompa - Panel kontrol dengan indikator LED - Kontrol digital presisi - 3 tingkat kekentalan (kremes dapat disesuaikan) - Kapasitas tangki: 7 liter (+ 2,3 liter di wadah beku) - Pendinginan udara - Kapasitas teoritis: hingga 170 cone per jam - Wadah higienis (tidak terlihat di foto = disediakan saat servis) - Merek: SPM DRINK SYSTEM - Model: U-GO P Dsdjyhmlbopfx Airouu - Distributor Prancis: GUSTO CONCEPT - Refrigeran: R404A - Tegangan: 240 V - Daya: 1 kW - Berat: 75 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, jam operasional: 7.329 h, kapasitas angkut: 2.500 kg, tinggi angkat: 6.500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.800 mm, jenis penggerak: Elektro, Forklift front empat arah Tipe tiang: Triplex Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: baik Tahun baterai: 2023 Side shifter, penyesuaian garpu, Katup ke-3, katup ke-4, pemanas, kabin penuh, Djdexgyz Eepfx Aireuu

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 3.090 h, kapasitas angkut: 2.500 kg, tinggi angkat: 4.900 mm, jenis bahan bakar: gas, tipe tiang: triplex, tinggi konstruksi: 2.243 mm, jenis penggerak: Treibgas, Four-way front forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Sideshifter, fork positioner, 3rd valve, 4th valve, heater, road approval (STVZO), full cab, Dujdpfewzpmcox Airou

Tahun pembuatan: 1984, Kondisi: bekas, Max. Schleifdurchmesser: 40 mm Min. Schleifdurchmesser: 5 mm Gewicht: 0,9 t Lieferumfang: - 2 Schleifscheiben mit Flansch - 8 Spannzangen - 1 Kühlmittelbehälter - Mechanischer Vorschub mit Festanschlag Djdpfscq Rv Ujx Airouu Hinweis: Die Gelenkwelle für den Werkstückantrieb ist ausgeschlagen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 420 mm, rentang pengukuran sumbu Y: 420 mm, rentang pengukuran sumbu Z: 420 mm, de-en-premus-precitool Dujdpfow Ew Nmox Airju

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3197, jarak lintasan sumbu Y: 420 mm, jarak gerak sumbu Z: 420 mm, Perlengkapan: dokumentasi / manual, Perangkat prapengaturan alat Pabrikan: KECHL Tipe: Trabant 351-2/M Tahun: 1995 Dapat digerakkan secara manual / dengan roda tangan / tombol untuk feed dan rapid traverse. Lintasan gerak: X/Y 270 mm Dujdow N N I Uepfx Aireu Dalam kondisi baik. Dokumentasi tersedia.

Kondisi: bekas, Tahun pembuatan: 1991, Measuring range X-axis 300 mm Measuring range Y-axis 300 mm Table size 800 x 800 mm Spindle taper ISO 30 Voltage 220 V / 50 Hz Total connected load 0.3 kW Weight 0.5 t Space requirement approx. 1.5 x 1 x 1.6 m Presetting device with SK 30 taper, SK 40 optionally available, Measurement display Zoller DA 6050 / 0266, Duedpetv Icnjfx Aireu Serial No.: H320/066

Kondisi: bekas, TECHNICAL DATA - Digital display, number of axes: 2 - Axes: X/Z - Tool holder orientation: 360 [°] - Machine weight: 90 [kg] - Machine dimensions: 800 x 650 x 1000 [mm] - Projector: 20 [x] - Tool holder: ISO 70 Djdpfeuhb Sgex Aireuu - Voltage: 230 [V] - Pneumatic: 4 - 6 [bar] - Frequency: 50 / 60 [Hz] - Tolerance measures: -10 - +6 [%]

Kondisi: bekas, TECHNICAL DATA Dodjuhb Smopfx Airjuu - Tool holder: HSK 40 - Measuring range Z: 250 mm - Measuring range X: 300 mm - Swivel diameter: 240 mm - Max. tool weight: 20 kg

Kondisi: bekas, TECHNICAL DATA Presetting device for Deco 7 Djdpjuhb Sasfx Aireuu

Kondisi: bekas, jarak tempuh: 140.278 km, daya: 96 kW (130,52 hp), pendaftaran pertama: 05/2019, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 7.030 mm, lebar total: 2.115 mm, tinggi total: 3.065 mm, panjang ruang muatan: 4.377 mm, lebar ruang muat: 2.044 mm, tinggi ruang muatan: 2.146 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), tail lift,

Kondisi: baru, Working area: approximately 360 mm Working area quadrant: 360 x 360 mm Working area bundle W x H: 180 - 280 x 50 - 160 mm Cutting speed: 20 - 100 m/min (stepless adjustment) Saw blade dimensions: 4,420 mm x 34 mm x 1.1 mm Saw blade tension: hydraulic Multiple feed: 500 mm Drive power: 3.7 kW Machine dimensions L x W: 2,500 x 2,200 mm Machine weight: 2,300 kg Standard equipment: - Hydraulically controlled full-stroke double vice clamping system - Drive via IE3 motor with frequency inverter (PMSM, complies with IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed speed display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vise - Split front vise - Infinitely variable speed control via inverter - Hydraulic blade tensioning - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control via rapid approach sensor - Preset cut counter with shut-off - Nesting fixture for bundle cutting (hold-down device) - Powered blade cleaning brush - Saw blade monitoring for idle and blade breakage - Rinse hose for machine cleaning - Work light - Roller table, 2 m long - One M42 bi-metal saw blade - One set of tools and a toolbox Duedpfxeqrqvhj Aireu

Kondisi: bekas, Tahun pembuatan: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping, drilling, and releasing; electric intermittent operation - Automatic retraction of the drilling unit after reaching the set drilling depth - Automatic extension of the drilling hole depth for end-grain drilling saves re-adjustment of the drilling depth when switching from flat-surface to end-grain drilling. (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end side 24 mm) - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) including 21 quick-change chucks (System Ganner) for easy drill bit changes Dodpfx Aioyyxkhereuu - Easy swivel of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamping beam, movable along Y-axis, with 3 pneumatic clamping cylinders for workpiece height up to max. 80 mm - Ideal stop system comprising: - 1 stop rail 1800 mm for shelf drilling (aluminium profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for series drilling in System 32 - Side stops and position settings, as well as drilling height setting over support table via mechanical digital counters - Side stops can be easily swung away for the shortest possible changeover between carcass, frame, and line boring - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm - Ideal three-stage... (weight: approx. 400 kg gross, approx. 350 kg net) Dimensions: (L x W x H) 1.35 m x 1.25 m x 1.40 m Equipment: - 1 dust extraction funnel, dust-tested, ø 120 mm - 1 set for series drilling in System 32, complete with: - 1 base rail 1050 mm (aluminium profile 40x40 mm) - 1 setting gauge for series drilling - 1 frame dowel device, complete with: - 1 central stop - 1 round stop bar, 850 mm long - 2 stops Location: Nattheim

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 215 h, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 120 mm, jarak gerak sumbu Z: 1.010 mm, daya motor spindle: 22.000 W, jumlah sumbu: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a bar capacity of 52 mm. The machine is equipped with a 12-position driven turret and a Y-axis travel of 120 mm. If you are looking for a high-quality lathe, consider the Okuma LB 3000 EXII horizontal lathe we are offering for sale. Please contact us for further details. - Control: OSP-P300LA - Spindle speed: 5,000 rpm Djdpeza E H Ujfx Airjuu - Spindle power: 22 kW - Spindle nose: ASA 6" (80 mm bore, without drawbar) - Bar capacity: 52 mm (Kitagawa SR1453 cylinder) - Spindle orientation: Electric - Y-axis travel: 120 mm - C-axis rotation: 360° (0.001° increments) - Turret: 12-position radial, driven - Turret motor speed: 6,000 rpm - Turret motor power: 7.1 kW - Tailstock: MT5 (500 kgf thrust, rotating center) - Tool holder: Eppinger live/static tool holders - High-pressure coolant pump: 0.8 kW, 6 bar, 20 l/min - Tool presetting: Manual - Programming: IGF conversational dialog - Chip conveyor: Enomoto hinged belt chip conveyor with external control box - Voltage: 400 V - Number of phases: 3 P - Frequency: 50 Hz - Maximum power consumption: 33.1 kVA - Total current consumption: 47.8 A - Max. motor current: 154 A - Control cabinet short-circuit resistance: 2.5 kA - Machine is a demonstration/exhibition unit Technical Specification: - Counter Spindle: Yes - Driven Tools: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2006, panjang pembubutan: 1.000 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan rotasi (min.): 12.000 rpm, We offer you: Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Dujdpfx Aisxxraqsrju Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Sub spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Speed range: 0 – 12,000 rpm Tool holder: Capto C6 Number of tool positions: 100 pcs Hollow clamping device: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis - Fully indexing B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through the sub spindle - Manual tool presetting in the main spindle - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power-off - Tool offset for 5-axis machining - Programmable data input - Dynamic change between diameter/radius - Stroke check prior to movement Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Specifications and details are subject to change and correction. Intermediate sale reserved!

Kondisi: bekas, Tahun pembuatan: 2024, Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW, fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve: clamping – drilling – releasing, plus electrical skip cycle function. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth when drilling from the edge. This eliminates the need to adjust the drilling depth when switching from face to edge drilling (+10 mm, e.g. for dowel length 35 mm, face drilling depth 14 mm and edge drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system) for easy bit change. - Simple swivel motion of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier, movable along the Y-axis, with 3 pneumatic clamps for workpiece height up to max. 80 mm. Ideal stop system including: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 flip stops, - Quick-change system, easily switchable from right to left stops for mirror-image drilling of shelves in carcass construction; also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height positioning over the support table with mechanical digital counters. - Side stops can be easily swung away for quick conversion between carcass, frame, and line boring. - Clamping arms for clamp carrier suitable for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drill bits: - 5 carbide dowel drill bits, Ø 8x77 mm, right - 4 carbide dowel drill bits, Ø 8x77 mm, left Basic machine Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW completely in standard version with: - Fully automatic electronic control with pulse operation via foot valve for clamping – drilling – releasing, with electrical skip cycle. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for edge drilling (as above). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system). - Simple swivel of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier movable on Y-axis with 3 pneumatic cylinders for workpiece up to max. 80 mm height. - Ideal stop system as above (1800 mm stop rail, 40x40 mm aluminum profile, 3 flip stops, quick change from right to left for mirrored shelf drilling; also usable for 32 mm system line boring). - Side stops and position adjustments, and drilling height setting above the support table via mechanical digital counters. - Side stops easily swiveling away for fast changeover between carcass, frame, and line boring. - Clamping arms on clamp carrier for row positions up to max. 300 mm. - Ideally structured three-stage tool system. Duodpfx Aijxnlflorsu - Extraction funnel, dust-tested, ø 120 mm - 1 set for line boring in 32 mm system

Kondisi: baik (bekas), Tahun pembuatan: 2013, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, High-quality SODICK AG 600L CNC wire EDM machine with comprehensive accessory package in excellent condition – superb machine, barely used For sale is a premium SODICK AG 600L CNC wire EDM machine featuring the SODICK LP2W controller, linear drives, and an extensive range of additional equipment. Manufacturer: SODICK Model: AG 600L Machine type: CNC wire EDM machine / wire eroding system Control: SODICK LP2W Commissioned: 07/2013 (according to documents) Operating hours: approx. 1,000 h (according to documents) Power generator: 40 A Max. workpiece size: 800 x 570 x 340 mm Travel (X/Y/Z): 600 x 380 x 350 mm Wire diameter: 0.10 – 0.30 mm Machine features: - Linear drives in X, Y, U, and V axes - Glass scales in X, Y, U, and V axes - Remote control - LAN port - Specialized corner control strategy - Flash memory - Automatic high-speed AWT - 10-year accuracy guarantee according to original SODICK documentation - Complete wire breaker, suitable for AG 400L and AG 600L Additionally included as per documentation: - SODICK K1C CNC high-speed drill / start hole drilling machine - Installation / initial training according to documentation - Introductory training course as per documentation Clamping system / accessories according to documentation: - SMART GRIP 3D adjustment pallet, fixed - SMART GRIP prism, clamping width 10 – 100 mm - SMART GRIP adapter, 90° indexable - SMART GRIP movable clamping jaw - SMART GRIP prism jaw - SMART GRIP jaw set - SMART GRIP jaw set 2 - SMART GRIP M8 clamping accessories - SMART GRIP slide 475 mm, hardened and corrosion-resistant - SMART GRIP VICE slide 475 mm, hardened and corrosion-resistant Additional BASIC SET PLUS AG600L (gage length 475 mm) consists of: - Pneumatic control unit - P-clamp, pneumatic - 2 x 3D adjustment pallets - Vise - Universal holder / bracket - Clamping set - Presetting plate with carriage Dsdey Tabnspfx Airouu Programming system as per documentation: - DCAMCUT 8.0 EXPERT / Solut - Machining module DCAMCUT EXPERT - EDMCAD A - Material removal simulation - Approximation - 4-axis roughing - Roughing with predefined islands - Partial roughing - 3D curve machining - Standard 4-axis NC processor - Datakit CAD direct interface CATIA V5 / 3D to SolidWorks, import This machine is ideal for precise wire EDM operations in toolmaking, mold making, fixture construction, and precision manufacturing. Note: All information has been taken from available documentation. Year of manufacture, current operating hours, machine weight, and external dimensions should be verified on the machine prior to sale or inspection.

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.100 mm, Fixed table 3100x1000 mm 1 X-axis rack and pinion transmission (dual drive), Y and Z axes with ball screws Pressurized optical scales X, Y, Z axis traversal speed up to 35 m/min X, Y, Z axis thrust max. 10,000 N X-axis with non-walkable telescopic covers Hydraulic system, power supply and wiring Direct hydraulic balancing system (double cylinder) Chiller unit 6000 W Hydropneumatic and Electric cabinets (Rittal), floor-mounted Work area lighting; Machine and spindle hour counter External operator station – mobile operator panel External low-pressure cooling system, not integrated in spindle C axis with torque motor Universal C-head with continuous positioning via torque motors Dodpfoy Uvrfsx Airouu Electrospindle 33(25) kW – 640(480) Nm – 8000 rpm – ISO 50 Heidenhain iTNC 530 HSCI CNC, complete with operator panel and 15" monitor mounted at front side of the machine Portable control unit with HR 510 handwheel Ethernet network connection Voltage 400 VAC Frequency 50 Hz 24-position ISO50 disc-type tool magazine with tool changer arm, including support and management software, positioned at end of X-axis stroke – qty 1 2 longitudinal auger chip conveyors + 1 crosswise belt conveyor Safety enclosures including sheet metal panels and sliding door with Lexan window, CE compliant safety standards. Upper cover included Partition wall and software setup for pendulum machining operations Medium-pressure (15 bar) coolant internally through spindle with bag filter Air blow through nozzle external to spindle Spray mist external tool cooling system Renishaw RMP60 digital probe Fixed BLUM laser preset station, including Blum measuring cycles and reference sphere Machine supplied with CE declaration of conformity and manuals. All stated technical data are for reference only and may be subject to change without prior notice and are therefore not binding.

Kondisi: baru, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° Dusdexmkz Nopfx Aireu ----- Glazing Bead Saw on Sliding Work Table Designed for the simultaneous cutting of pairs of glazing beads on the sliding work table. The RU-GL glazing bead saw is mounted on a sliding work table with scanning and clamping devices for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a carriage, manually movable. Pneumatic clamping from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning sash frames. Pos. 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H) !!! Mounted on sliding work table with scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a manually movable carriage. Pneumatic clamping from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning sash frames. ----- Base price in the above configuration: on request! ----- Price ex works plus packaging, shipping, and current material surcharge of 6% on the total price Options at additional cost: ----- Pos. 1.1 1 set of carbide-tipped saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, comprising 1 pc blade L1233 (left) and L1085 (right), with special 43° grind. Additional cost: 502.00 Euro Pos. 1.2 Holder for scanning gauge for RU-GL for transferring the measured values to the saw with pneumatic installation. Additional cost: 635.00 Euro Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made from square tube profile with 2 fixed and 2 adjustable cams for scanning glazing bead length Additional cost: 497.00 Euro Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made from square tube profile with 2 fixed and 2 adjustable cams for scanning glazing bead length Additional cost: 445.00 Euro Pos. 1.5 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after inspection of the glazing beads. Depending on the number of different types of glazing beads used, several spacer sets may be required. To determine the exact number, we require profile drawings of the intended glazing beads prior to order confirmation. Additional cost: on request, after submission of your glazing bead drawings Pos. 1.6 Operating time switch for independent extraction system. Adjustable from 5 sec. to 3 hours. At each sawing operation, the extraction runs for the preset time. If sawing takes place again within this time, the extraction timer resets. Additional cost: 731.00 Euro ----- Total price ...