Beli Rexon Pengeboran Mesin bekas (79.007)

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies Gjdpeq Ii Dlofx Adtott The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 5801, de-plate-drilling-fdb600 Gtodpfx Asibq Itsdtst

Kondisi: baru, Drilling capacity in steel (diameter): 25 mm Throat depth: 170 mm Drill stroke: 50 mm Slot milling cutter capacity: 16 mm Spindle mount: MT 3 Spindle speeds: 50 - 3000 rpm Table cross travel: 280 mm Table longitudinal travel: 155 mm Clamping surface of table: 500 x 180 mm Supply voltage: 230 V Max. distance between work table and spindle nose: max. 320 mm Total power requirement: 0.8 kW Machine weight approx.: 150 kg Gtedpfevdldwsx Adtet Required space approx.: 670 x 550 x 910 mm Drilling and milling machines: Digital depth and speed display, 2 gearbox stages With fine adjustment and variable speed, Includes left/right switch Head swivels to the left and right Supplied with corresponding tools

Kondisi: hampir baru (bekas), Tahun pembuatan: 1990, Drilling capacity in steel: 50mm Drilling capacity in cast iron: 63mm Spindle: MT4 Gtjdpfx Asg I I Ekedtjt Spindle speeds: (12) 45-2000 RPM Drill head travel: 350-1250mm Distance spindle to base plate: 350-1420mm

Tahun pembuatan: 1998, Kondisi: baik (bekas), I am selling a dowel boring machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programming CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available immediately Gsdpfx Adsd Exwgotstt

Kondisi: baru, Tahun pembuatan: 2025, Neue halbautomatische Fräs- und Bohrmaschine MLA MP 34 zur Fräsung und Dreifachbohrung für die Griffmontage in PVC-Türen und -Fenstern Installierte Optionen: Gedpfx Adjwh Twxjtstt - Zentriervorrichtung - Rechts- und linksseitige Auflagen, Länge = 2 m Auf Lager

Tahun pembuatan: 1973, Kondisi: bekas, Drilling capacity in steel (diameter): 32 mm Throat depth: 410 - 1000 mm Workpiece height - max.: 765 mm Coolant system: yes Drill spindle diameter: 38 mm Quill diameter: 70 mm Spindle stroke: 225 mm Drill spindle taper: MK 4 Spindle speeds - stepless: 70 - 2000 rpm Feed range - spindle: 0.04 - 0.32 mm/rev Column diameter: 225 mm Drill radius max./min.: max. 1130 mm Table clamping surface: 630 x 1320 mm Height adjustment: 500 mm Base plate: 1500 x 1000 mm T-slots: 4 pieces T-slot spacing: 18 mm Total power requirement: 2.2 kW Machine weight approx.: 1.8 t Space requirement approx.: – Godpfsgmu A Ssx Adtett Support travel: 590 mm Without rotary table, without tools

Tahun pembuatan: 1963, Kondisi: bekas, Radial drilling machine, drill press, cantilever drilling machine, universal drilling machine, milling machine - Arm reach: 645 mm - Taper: MT3 - Spindle speeds: 95 - 1050 rpm - Column diameter: Ø 190 mm Gtjdpfedvnbxex Adtst - Spindle stroke: 195 mm - Automatic feed: 0.05/0.10/0.20 mm/rev - Clamping table: 735 x 520 mm - Dimensions: 1350/705/H2170 mm - Weight: 1100 kg

Kondisi: baru, Drilling capacity in steel (diameter): 16 mm Throat depth: 170 mm Drilling stroke: 50 mm Slot milling cutter capacity: 16 mm Spindle taper: MT2 Spindle speeds: 50 – 2250 rpm Gsdpfxjupxmrj Adtstt Table cross travel: 320 mm Table longitudinal travel: 145 mm Table clamping surface: 500 x 140 mm Supply voltage: 230 V Total power requirement: 0.5 kW Machine weight approx.: 90 kg Required space approx.: 0.5 x 0.45 x 0.84 m Drilling and milling machine featuring: - Variable spindle speed - Digital depth gauge - Forward / reverse switch - Cross slide - Swivelling spindle head - Manual feed via handwheel - Tool case with content Note: Supplied without digital readout! Surcharge for 3-axis digital readout: EUR 499

Kondisi: bekas, Tahun pembuatan: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirements approx.: m F E H L M A N N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 16 085109 Gtedot Hxa Hopfx Adtst X-axis (longitudinal): 850 mm Y-axis (transverse): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle – table top: 140 / 690 mm Vertical travel of drill head, motorized: 540 mm Spindle overhang approx.: 450 mm Spindle taper: SF 32 Drilling capacity in steel: 30 mm Spindle stroke (quill), vertical max.: 210 mm Spindle speeds (infinitely variable, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Drilling feed rates, 6 automatic steps: 0.03/0.07 to 0.4 mm/rev Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total connected load: approx. 16 kW - 380 V - 50 Hz Weight approx.: 3,500 kg Accessories / Special equipment: • HEIDENHAIN CNC 2-axis contouring control Type TNC 150 with color monitor, graphics, all standard subroutines and cycles, tapping cycles, hand-held controller or electronic handwheel, RS-232 interface, etc. The drill spindle axis (Z) can be operated manually or via CNC. • Drilling depth can be preset via a 12-position turret stop with digital display on the monitor. • The drill head can also be programmed via a height positioning device in 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ball screws • With quick-change tool system and various tool holders, various drill chucks, coolant device, etc. Condition: good to very good - demonstration under power possible Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Tahun pembuatan: 1991, Kondisi: bekas, nomor mesin/kendaraan: 9198590, Technical Data: - Drilling capacity: 60 mm - Arm reach: 1600 mm - Spindle taper: MT 5 - Spindle stroke: 390 mm - Spindle speeds, 20 steps: 20 - 2000 rpm - Clockwise/anticlockwise rotation - Feed, 12 steps: 0.056 - 2.5 mm/rev - Drive: 400 V / 12.8 kW - Electromechanical clamping of arm and drilling unit - Distance (machined machine bed – spindle quill): - min. approx. 900 mm - max. approx. 1600 mm - Usable machine bed with 4 T-slots: 950 x 1700 mm Gtodpfx Aodhkhtodtjt - Coolant system - Box table - Space requirements: approx. W 2600 x H 3000 x D 1000 mm - Weight: approx. 4500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, High-precision drilling and milling machine Aciera 22 VA Good condition, previously used in educational facility Year of manufacture: approx. 1990 Table size: 600 x 320 mm Spindle speed: 40 - 3600 rpm Spindle speed selection (rpm): 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter: 65 mm Quill stroke: 120 mm Spindle mount: Aciera Quick-change system Automatic thread cutting Drilling capacity in solid material: 25 mm Maximum drilling capacity: up to 30 mm Height adjustment via hand crank Motor: 1.1 kW Lamp Several quick-change holders included Gtjdshqm D Nepfx Adtst Dimensions (W x D x H): 90 x 130 x 185 cm Weight: approx. 800 kg Technical specifications subject to change

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Control system: Heidenhain TNC 310 Accessories included Working area X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Main drive Gedpfjp H S Uxex Adtjtt Infinitely variable spindle speed: 20 – 4,500 rpm, programmable Tool holder: SK 40 Work table B/C-axis drive: manual Clamping surface: ø 700 x 500 mm T-slot pitch/size: 63/14H7 mm Rotational range: 360° Swivel range: +95 / -10° Dimensions Length: 1800 mm (750 mm control unit) Depth: 1800 mm Machine weight: 2,600 kg

Kondisi: bekas, Drilling automation system, drilling machine, panel drilling machine, multi-spindle drilling machine - Drilling automation system: suitable for advertising signs - Spindle mount: 12 mm (can be modified to customer requirements) - Automatic drilling feed Gjdpfx Asddfhxsdtott - Table size: 1200 x 1000 mm - Spindle stroke: 200 mm - Speed: 2800 rpm - Feed: via gearbox - Pneumatic workpiece clamping - Pneumatic workpiece ejection - Dimensions: 1360/1520/H2180 mm - Weight: 450 kg

Kondisi: baru, Drilling capacity in steel (diameter): 16 mm Throat depth: 180 mm Drilling stroke: 85 mm Spindle taper: MT 2 Spindle diameter: 47 mm Spindle speeds: 320 - 3300 rpm Table traverse (cross): 230 mm Table traverse (longitudinal): 100 mm Clamping area of table: 420 x 155 mm Connection voltage: 230 V Maximum packing size: 900 x 600 x 300 cm Total power requirement: 0.75 kW Gtedeupxcyepfx Adtst Machine weight approx. 80 kg Dimensions (L x W x H): 0.7 x 0.7 x 0.8 m Drilling and milling machine with: - Cross support - Feed via handwheel - Chip guard - 16 mm drill chuck - Mechanical MT tool clamping

Tahun pembuatan: 1981, Kondisi: bekas, nomor mesin/kendaraan: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel: 28 mm - Thread cutting device Gedpfsb Ennkjx Adtstt - Drill spindle mount: MT 3 - Drill spindle stroke: 160 mm - Table dimensions approx. 750 x 500 mm - Arm reach up to approx. 620 mm - Vertical travel of the arm: 600 mm - Column diameter: 250 mm - Spindle speeds in 12 steps: 80 – 2800 rpm - 3 feeds: 0.1 / 0.15 / 0.25 mm/rev - Drill spindle drive: 400 V / 5.5 kW - Coolant system - Space requirement: approx. W 1100 x H 1550–2150 x D 950 mm - Weight approx. 1200 kg - Operating manual

Kondisi: bekas, Pillar drilling machine, column drilling machine, upright drilling machine, multi-spindle head, multi-spindle drilling head, drilling gearbox - with twin-spindle drilling head by Sigloch Schrieder, type: V602 - Drive power: 1.02/0.88 kW - Adjustable drill spacing: 18-110 mm Gtedpfx Ajc Rpnnsdtst - Max. drill diameter: 2x Ø 6 mm - Table size: 275 mm - Spindle taper: MK3 - Throat depth: 220 mm - Speed range: 100-2900 rpm - Columns: Ø 100 mm - Spindle stroke: 75 mm - Gearbox - Dimensions: 900/400/H1910 mm - Weight: 230 kg

Kondisi: baru, Drilling capacity in steel (diameter): 25 mm Throat depth: 175 mm Quill travel: 50 mm Slot milling capacity: 16 mm Spindle taper: MT 3 Spindle speed: 50 – 3000 rpm Table travel (transverse): 380 mm Table travel (longitudinal): 175 mm Clamping surface of table: 700 x 180 mm Power supply: 230 V Gtsdoupxtfopfx Adtot Max. distance between spindle nose and worktable: max. 320 mm Total power consumption: 0.75 kW Machine weight: approx. 150 kg Space requirement: approx. 670 x 550 x 910 mm Drilling and milling machine with large table SINO 3-axis digital readout Quill travel digital readout 2 speed ranges Forward/reverse switch Head swivels 90° left/right Spindle guard Including toolbox with various tools

Kondisi: baru, Drilling capacity in steel (diameter): 30 mm Throat: 200 mm Drilling stroke: 70 mm Slotting cutter capacity: 16 mm Spindle taper: MT3 Spindle speeds: 50 - 3000 rpm Cross table travel: 565 mm Longitudinal table travel: 220 mm Clamping surface of table: 840 x 210 mm Connection voltage: 400 V Max. distance between worktable and spindle nose: max. 470 mm Total power requirement: 1.1 kW Gedpfsupxt Ejx Adtott Machine weight: approx. 230 kg Required space: approx. 0.75 x 1.05 x 1.3 m Drilling and milling machine with large table SINO 3-axis digital display Digital quill travel display 2 speed ranges Left/right switch Head tilts left/right 90° Taper MT 3 - B16 Drill chuck 3 - 16 mm Spindle guard Machine base optional (199 EUR) Includes toolbox with various tools

Kondisi: baru, Drilling capacity in steel (diameter): 35 mm Throat depth: 230 mm Drilling stroke: 125 mm Spindle taper: ISO 40 Spindle speeds: 115 – 1750 rpm Cross table travel: 560 mm Longitudinal table travel: 175 mm Table clamping surface: 1000 x 240 mm Max. distance between worktable and spindle nose: 375 mm Supply voltage: 400 V Total power requirement: 0.85/1.5 kW Machine weight approx.: 0.95 t Required space approx.: 1.3 x 1.2 x 2.1 m Equipment/features: - 3-axis digital readout - Digital depth display - Motorized feed for X and Y axes - Left/right rotation - Emergency stop - Swivelling drill head Godpju Imkdofx Adtott - Spindle guard - Machine lamp - Tool box with contents

Kondisi: baru, Drilling capacity in steel (diameter): 16 mm Throat depth: 185 mm Drilling stroke: 50 mm Capacity, slotting cutter (end mill): 20 mm Spindle taper: MT 2 Spindle diameter: mm Spindle speeds: 100–1500 / 200–3000 rpm Table travel, crosswise: 175 mm Table travel, longitudinal: 280 mm Table clamping surface: 500 x 180 mm Connection voltage: 230 V Total power requirement: 0.85 kW Machine weight approx.: 0.12 t Space requirements approx.: 0.86 x 0.6 x 0.9 m Drilling and milling machine with: - variable spindle speed - cross slide Gsdpfx Adourznwetett - 90° swiveling spindle head left/right - feed via handwheel

Kondisi: bekas, Tahun pembuatan: 1985, Perjalanan x 400 mm Perjalanan y 180 mm Perjalanan z 300 mm Ukuran meja 760 x 200 mm Dudukan spindel ISO MK 3 Kecepatan spindel 40 - 1800 rpm Langkah pahat 80 mm Kebutuhan daya total 1,2 kW Berat mesin sekitar 0,38 t Godpfsw Tdwrsx Adtjtt Dimensi P x L x T 1,75 x 1,65 x 1,9 m Mesin bor dan frais - Sumbu X tanpa spindel - Pelumasan terpusat

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 - 3200 rpm Table cross travel: 190 mm Table longitudinal travel: 490 mm Clamping surface of table: 730 x 210 mm Gtjdeupw T Depfx Adtot Supply voltage: 400 V Feed rates: 0.1 - 0.18 - 0.26 mm/rev Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Required space approx.: 0.8 x 0.75 x 1.85 m Drill/milling machine equipped with: • Drilling capacity 40 mm • Milling capacity 32 mm • Tapping device • Cross table with adjustable guides • Quill feed • Change-gear transmission

Kondisi: baru, Drilling capacity in steel (diameter): 45 mm Quill travel: 125 mm Table traverse (cross): 560 mm Table traverse (longitudinal): 230 mm Table clamping surface: 800 x 240 mm Spindle speeds: 75 - 3200 rpm Max. milling cutter diameter: 80 mm Spindle taper: ISO 30 Max. distance between table and spindle nose: 460 mm Throat: 230 mm Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight: approx. 580 kg Space requirement: approx. 1.2 x 1.0 x 2.1 m Equipment: All axes with 3-axis digital readout. Quill travel with separate digital display. Automatic feed on X-axis and quill. Motorized Z-axis. Tapping unit. Coolant system. Machine base. Collet set, SK tool holder. Gsdpfx Adjupxrnetott Additional machine accessories in box.

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Gtjdpfoupw Uzox Adtet Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 – 3,200 rpm Table traverse (cross): 190 mm Table traverse (longitudinal): 490 mm Clamping surface table: 700 x 210 mm Supply voltage: 400 V Max. milling cutter diameter: 80 mm Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.8 x 0.75 x 1.85 m Drilling/milling machine equipped with: • Tapping device • Compound table with adjustable guides • Quill feed • Gearbox • SK 40 spindle taper