Beli Romer bekas (120)

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). Kjdpfx Aefz I Edoglswt - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Kjdofz I Ehepfx Aglewt Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes Kwodpfxefz U Sas Aglst • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, ROMER manipulators are characterized by quiet operation. They are suitable for both simple, widely used processes, as well as complex multidimensional processes. Programming is carried out via a PLC control system. Suitable for work with both long and short strokes. The toothed belt drive ensures a quiet operation. Maintenance-free AC motor. Slim column design for space-saving installation. The robust construction of the manipulators guarantees high performance and stability. The manipulator is equipped with a 7" touch panel, or can be controlled externally via the ModBus protocol using RJ45 cables. Kedpfxof Aad Ne Aglswt

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Kwsdeflmdwspfx Aglet Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system Ksdpfoflpmqsx Aglswt • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, 7" Touch Panel The large color touch panel is aesthetically pleasing and offers comfortable, intuitive operation. All key parameters can be set directly via the panel. Memory for 20 programs with 10 events each It is possible to store up to 20 programs and activate up to 10 sequential time-temperature events arranged along the heating curve. This feature is particularly required for more demanding processes. Ksdpfx Aofzb Nbegljwt Gas/Oil Consumption Data Consumption is calculated based on burner settings. This function enables you to estimate the operating costs of a specific cycle, plan resource usage, and monitor personnel efficiency. Dual-Channel Recorder With USB Cycle Parameters Each furnace is equipped with a recorder that logs all firing parameters, including two temperature channels—similar to an aircraft black box—onto a USB stick. The system also supports analysis of daily/monthly reports, including media consumption and performance metrics. Every heating cycle that initiates with door opening is documented as a new event. Such a dedicated option is not available from any other manufacturer. This system was custom-developed from scratch by our programmers. Automatic Smoke Extraction Flue The chimney can be programmed to open a few minutes before the firing process ends to aerate the chamber, which is particularly important for more demanding processes. The extraction process can be remotely controlled via the control panel and does not require manual mechanical operation like with most constructions. Minute-by-Minute Completion Forecast After the cycle has started, how long until it finishes? By calculating the heating dynamics, the system continuously updates and displays the remaining time until completion. Easy Door Operation To open, simply pull the door. The lock features an adjustable pressure against the door. To close, just push— the lock will catch and automatically retract the door. To minimize heat loss in the workshop when the door is open, a hood above the door redirects some of the warm air. The MTS system has been developed to accurately read the true chamber temperature. Standard measurements, often based on a single temperature sensor, can be inaccurate. MTS is a multi-sensor system positioned at the most remote points in the chamber. The multi-zone heating system ensures a previously unmatched firing quality.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Kwjdefzkrnjpfx Aglot Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, ROMER cabins are equipped with four-inch color touchscreens. The cabin operation is intuitive and can be controlled in three modes: automatic (timer-based), automatic (triggered by a clogged filter sensor), or manual. Automatic Filter Cleaning The electronic system for automatic filter cleaning features an adjustable range for cleaning frequency and burn-off timing. Each filter is cleaned individually, and the filters can also be cleaned manually at the touch of a button. From experience, we know that it is often difficult for operators to carry out regular filter cleaning. Thanks to this system, the operator no longer has to worry about it. Aluminum fans are very quiet, operating at 74-79 dB—which is not much. Ksdofzkzhspfx Agljwt It is difficult to have a conversation, even with a standard cabin configuration. Browse through the cabin By moving the lifting rails inside the cabin, the work efficiency is improved and relieves the operator from having to move them manually.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Kwedpfx Agsfz A Iwjlot Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, ROMER manipulators are characterized by quiet operation. They are suitable for both simple, common applications as well as complex, multidimensional processes. Programming is done via a PLC controller. They operate with both long and short strokes. The toothed belt drive ensures smooth and quiet running. The maintenance-free AC motor offers reliable performance. Their slim column design saves installation space. The robust construction of the manipulators provides great versatility and high stability. The manipulator is equipped with a 7" touch panel or can be controlled externally via the Modbus protocol using RJ45 cables. Ksdpfx Aofz Dmxogljwt

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called demi-water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchange resin operating in the sodium cycle, Kodpefz I Uiofx Aglowt - Strongly basic anion exchange resin operating in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half-treated water station is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchange column operating in the sodium cycle, - Strongly basic anion exchange column operating in the chloride cycle, - Carbon filter Kwsdpfx Agsfz Nakjlst Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, ROMER cabins are equipped with four-inch color touchscreens. The cabin operation is intuitive and can be controlled in three modes: automatic (timer-based), automatic (triggered by a clogged filter sensor), or manual. Automatic Filter Cleaning The electronic system for automatic filter cleaning features an adjustable range for cleaning frequency and burn-off timing. Each filter is cleaned individually, and the filters can also be cleaned manually at the touch of a button. From experience, we know that it is often difficult for operators to carry out regular filter cleaning. Thanks to this system, the operator no longer has to worry about it. Aluminum fans are very quiet, operating at 74-79 dB—which is not much. It is difficult to have a conversation, even with a standard cabin configuration. Browse through the cabin Kjdpfxeflk Akj Agljwt By moving the lifting rails inside the cabin, the work efficiency is improved and relieves the operator from having to move them manually.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. Kjdeflrc Sepfx Aglewt - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, 7" Touch Panel The large color touch panel is aesthetically pleasing and provides comfortable, intuitive operation. All key parameters are set directly from the panel. Kwodpfx Aofy Txyogljt Storage for 20 Programs with 10 Events Up to 20 programs can be stored and up to 10 consecutive time-temperature events can be activated, each arranged along the heating curve. This feature is particularly essential for more demanding processes. Gas / Oil Consumption Data Consumption is calculated based on the burner settings. This feature allows you to estimate the cost of a specific cycle, plan consumption, and control operating personnel. Two-Channel Recorder with USB for Cycle Parameters Each furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—similar to an aircraft black box—on a USB stick. The system also enables the analysis of monthly/daily reports, including media consumption and output. Each heating cycle, even those involving opening the door, can be re-traced several years back. No other manufacturer offers such a dedicated option. This system has been custom-developed by our programmers from scratch. Automatic Exhaust Flue The chimney can be programmed to open a few minutes before the end of the firing process in order to vent the chamber. Remote control via the control panel is available so the mechanism does not require manual operation, as is common with most other designs. Minute Forecast Until Completion When the firing cycle has started, the panel can calculate and display the remaining time based on the heating dynamics. Simple Door Operation To open, just pull the door; the lock applies adjustable pressure against the door for sealing. To close, simply push the door— the lock secures and automatically draws it in. Heat Loss Reduction To minimize heat escaping into the hall when opening the door, a hood is installed above it to redirect a portion of the hot air elsewhere. MTS System for Accurate Chamber Temperature Measurement Standard systems rely on a single temperature measurement, which is often inaccurate. The MTS system uses multiple sensors positioned at key points throughout the chamber. The multi-zone heating concept ensures a previously unattainable firing quality.

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. Kwedpfx Ajfy T Rceglet • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches • Control system for reliable sealing and full opening of dampers • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Tahun pembuatan: 2020, Kondisi: baru, Touch to Delete ROMER cabins are equipped with 4-inch color touchscreen controls. Cab operation is intuitive and available in three modes: automatic (temporary), automatic (via a plug-in filter sensor), or manual. Filter Plug Sensor The cabins are fitted with a sensor that monitors filter clogging and indicates when they need to be cleaned. The system also notifies the user when filters have been used. Automatic Filter Cleaning The electronic automatic filter cleaning system manages the cleaning intervals and activation times. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on operators to clean the filters. Thanks to this system, the operator does not need to remember or stop for cleaning. Low Noise Level Aluminum fans operate very quietly, producing only 74-79 dB, which is not excessive. Kwsdpsfzciqsfx Aglot Even with the standard cabin design, it is difficult to carry on a conversation near the units. Exhaust through the cabin. The cabin’s overhead squirrel cage fans improve workflow by eliminating the need for manual push systems, preventing operators from being distracted. Explosion Protection The cabin is designed to prevent explosive mixtures from accumulating during the painting process. All components have been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) Kedpjfzkqmefx Aglowt The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. Kodpfxofzrapo Aglewt High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions Ksdpfofz A D Nsx Agljwt The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. Kwodpfsfz A H Djx Aglot - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, ROMER manipulators are characterized by quiet operation. They are suitable for both simple, widely used and complex multidimensional processes. Programming is done via PLC control. They can handle both long and short strokes. The toothed belt drive ensures quiet operation. Maintenance-free AC motor. Slim column design for space savings. The robust construction of the manipulators provides extensive capabilities and high stability. The manipulator is equipped with a 7'' touch panel or can be externally controlled via the ModBus protocol with RJ45 cables. Kwsdofz Dmfspfx Aglet

Tahun pembuatan: 2020, Kondisi: baru, en-GB: • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² Kwjdpfjfz Dqmsx Aglet • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per shot • 50 l waste container capacity Description • Dust collector with efficient radial impeller • Two operating modes – full power and ECO • Base weight of filter material up to 260 g/m² • High suction power with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter equipped with its own solenoid valve

Tahun pembuatan: 2020, Kondisi: baru, • Electric data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m3/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m2 • Automatic filter cleaning • Air consumption: max. 12L at 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with an efficient radial impeller • Two operating modes - Full Power and ECO • The basic weight of the filter material used is up to 260 g/m2 • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve Kjdpfxefz Dq Ae Aglowt