Beli Schaublin 12 bekas (55)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1982, panjang pemakanan sumbu X: 700 mm, panjang umpan sumbu Y: 490 mm, panjang umpan sumbu Z: 250 mm, Tampilan Heidenhain 3 sumbu spindel ISO 40 Knsdpfsxxmpmsx Aahof meja 1100x305 mm perjalanan 700x490x250 mm 7,5 HP berat 2100 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, lebar di tengah: 630 mm, lubang spindel: 40 mm, diameter pembubutan: 340 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 55 rpm, berat keseluruhan: 1.450 kg, Schaublin 150A Lathe Specification Manufacturer: Schaublin Model: 150 Year of manufacture: 1997 Control: conventional Max. turning diameter: 340 mm Distance between centres: 630 mm Kodewgd R Hopfx Aahonf Main spindle Speed range: 55 to 3000 rpm Spindle mount: Camlock D1-4" Collet chuck: Schaublin B32 Extras Multifix B + 7 tool holders 3- and 4-jaw chucks Tailstock Collet set Coolant system Heidenhain DRO (2-axis) Machine lamp Taper gauge Quick-change toolpost Fixed and travelling steady rests Etc.

Kondisi: bekas, Tahun pembuatan: 1999, de-to-hu-it-lt-001 Kjdpsxlugmefx Aahsnf

Kondisi: baik (bekas), Dengan tampilan digital Dengan kepala bor dan frais Perjalanan 330 x 400 x 475 mm Area penjepitan meja 650 x 245 mm Kepala spindle ISO 40 Kecepatan spindle 63-2.800 rpm Berbagai aksesori Kodpfx Aasw Nnutshjnf MARCELS MASCHINEN CH

Kondisi: baik (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 160378, diameter putar di atas sled silang: 180 mm, lubang spindel: 40 mm, diameter pembubutan: 375 mm, tinggi pusat: 160 mm, panjang pembubutan: 750 mm, panjang total: 2.500 mm, lebar total: 1.000 mm, tinggi total: 1.500 mm, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 38 rpm, berat keseluruhan: 2.500 kg, - Operating voltage: 380 V - Maximum workpiece diameter over bed: 375 mm - Maximum workpiece diameter over cross slide: 180 mm - Spindle taper: Morse 5 - Collet pass-through: 24 mm - Fine feed, longitudinal and cross: 0.015 to 0.21 mm/rev - Longitudinal and cross feed: 0.025 to 0.35 mm/rev - Cross slide travel on the bed: 750 mm - Tool slide travel: 120 mm - Cross slide travel: 215 mm - Center height above tool slide: 32 mm Knjdsv Irh Dspfx Aahsf - Tool cross-section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill travel: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Including documentation - Matching workshop cabinet including accessories

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Schaublin 102 VM Akan tersedia total 8 unit di stok Harga per unit Knjdpfxexq D Nuj Aahof

Kondisi: sangat baik (bekas), The used SCHAUBLIN 102N bench lathe is a Swiss-made, manual precision lathe of compact size, center height 102 mm, distance between centers 400 mm, spindle bore 20 mm. Available: No. 2 similar machines (one with short bed and quick-change tooling, the other with long bed and geared headstock); both already equipped with electrical control panel and documentation in compliance with standards; tooling and conditions as shown in the photos. Knedpfxewqxcxs Aahof

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Aksesori tambahan dapat didiskusikan di lokasi. Kedpev Natwsfx Aahsnf

Kondisi: siap digunakan (bekas), Table clamping surface: 1100 x 255 mm Table travel X-axis: 700 mm Table travel Y-axis: 250 mm Table travel Z-axis: 430 mm Knedpfxsv Dh Iro Aahof Spindle speeds: 38 - 1500 rpm Longitudinal and cross feeds: 12 - 1000 mm/min Vertical feed: 1.75 m/min Electrical connection: 380 V, approx. 4 kW Required space: 1700 x 1600 x 1650 mm Weight: 1650 kg

Kondisi: sangat baik (bekas), Double spindle, C-axis FANUC 18i-TB control Turning diameter: up to 300 mm Turning length: up to 366 mm Main spindle speed: 30–5,000 rpm Counter spindle speed: 30–6,000 rpm Turret: 12 driven stations Kedpfxswufdqe Aahenf C-axis indexing: 0.001 degrees Various accessories MARCELS MASCHINEN CH

Kondisi: baik (bekas), Tahun pembuatan: 1998, Schaublin 65 TM-3 Kodpfx Ajxf D S Ejahjnf Panjang 2800, Lebar 1700, Tinggi 2150 Motor 27 kW Termasuk seperti pada gambar Konveyor serpihan Chuck Fanuc 18i-T

Kondisi: bekas, Mesin bubut tuas tangan SCHAUBLIN Tipe 102 Mesin bubut mekanik No. Mesin: 208322 Tahun pembuatan: sekitar 1970 Knedpfx Aaew Iq Umohof Panjang bed total: 650 mm Tinggi center di atas bed: 102 mm Tinggi center di atas support: 53 mm Kecepatan spindle rata-rata: sekitar 2.800 rpm (3 tingkat kecepatan) Motor penggerak: 0,37 kW, 2.800 rpm Sambungan listrik: 380 Volt, 50 Hz - Support pemotongan dan grooving tuas tangan dengan stopper yang dapat diatur secara presisi - Pemegang pahat dengan pengaturan tinggi presisi - Perlengkapan collet (hanya tersedia satu collet) - Perubahan kecepatan dengan memindahkan sabuk penggerak Kebutuhan ruang dengan meja bawah L x W x H: 1150 x 600 x 1200 mm Berat dengan meja bawah: 130 kg Kondisi bagus

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Schaublin 150 High-Precision Lathe with 2-axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025 - 0.35 mm/rev >> Metric threads: 0.25 – 14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-jaw chuck 160 mm, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck with collets Knedpfx Aewynlueahjf >> Change gears >> Stops >> Coolant system >> 1 box of spare jaws >> Centres >> Operating manual About the machine: For sale is a Schaublin 150 high-precision lathe. The machine is operational, equipped with rapid traverse, and is in good used condition. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Kondisi: bekas, Centre height 102 mm Centre distance 450 mm Kedjwbi Hpjpfx Aahsnf Spindle bore 25 mm Spindle speed: 220 - 2600 Accessories have not been checked for completeness Cabinets are not included in the scope of delivery.

Kondisi: bekas, Tailstock for lathe, counter-support for dividing head, indexing device Knsdpod Riw Hjfx Aahjf -for: Schaublin 102 -Collet chuck mount: W25 -Drawing: see photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Kondisi: bekas, TECHNICAL DATA - Travels: 320 x 150 x 375 [mm] - Distance vertical spindle - table surface: 310 [mm] - Distance horizontal spindle - table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58-2000 [rpm] - Spindle taper: ISO 30 - Feeds: 12-400 [mm/min] - Rapid traverse: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine dimensions: 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] Knsdsuhbw Njpfx Aahef EQUIPMENT - Swiveling vice - Coolant system

Kondisi: sangat baik (bekas), - Multifix ‘B’ quick-change tool post - Quick-action collet chuck device Centre height: 150 mm Centre distance: 630 mm Kjdjhmkh Tjpfx Aahjnf Spindle bore: 40 mm Spindle speed (stepless): 55 – 3000 rpm Feed rate: 0.05 – 0.35 mm/rev Spindle taper / tailstock taper: MT 5 / MT 3 Swing over cross slide: 177 mm Swing over bed: 340 mm Power: 4.45 kW Dimensions: 1730 x 970 x 1300 mm Weight: 1250 kg

Kondisi: baik (bekas), Centre height: 102 mm Centre distance: 450 mm Leadscrew / feed shaft W20 collets included Spindle speed: approx. 210 – 3000 rpm Reduction gearbox Left- and right-hand rotation 2-speed drive L x W x H: approx. 1760 x 595 x 1230 mm Ksdscug H Sjpfx Aahenf Weight: approx. 650 kg Various "Schaublin 102" versions available from stock!

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, High-Precision Leadscrew Lathe Schaublin 102N-VM Kedpfswvq Tmjx Aahjnf Technical Data: >> Machine No. 283152 >> Centre Height: 102 mm >> Distance Between Centres: 450 mm >> Spindle Bore: 25 mm >> Longitudinal Feeds: 8 steps from 0.02–0.3 mm/rev >> Metric Threads: 20 pitches from 0.25 to 4 mm >> Imperial Threads: 25 pitches from 80 to 6 TPI >> Tailstock Taper: MK2 >> Stepless Speed Range: 270–3000 rpm >> Weight: approx. 700 kg Equipment: >> 3-jaw chuck with 2 sets of jaws >> Tool holder with 6 tool pockets >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Tooling, drill chuck (see photos) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the 102VM runs quietly. The change gear set for thread cutting is included, though possibly not complete. You are welcome to view and test the machine under power at our premises to convince yourself of its excellent condition.

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Connected load: 24 kW. Kjdong E Tyopfx Aahenf

Kondisi: bekas, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over carriage: 120 mm Headstock Spindle nose for collets, type Schaublin W25 Spindle bore: 25 mm Collet capacity: 20 mm Gear reduction ratio: 1:5 Bed Height x Width x Length: 168 x 130 x 1000 mm Cast iron bed, trapezoidal profile as per lathe 102 N, with hardened and ground dovetail guideways. Carriage Maximum travel on bed: 400 mm Tool slide width - length: 80 – 194 mm Hand traverse: 90 mm Centre height above tool slide: 20 mm Tool shank size: 12 x 12 mm Cross slide width – length: 94 – 300 mm Hand traverse: 100 mm Saddle: length of guideways on bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric threads: 0.25 – 4 mm Machine plate for 25 imperial threads: 80 – 6 TPI Tailstock Quill diameter: 30 mm Quill taper: 2 Morse Quill travel: 80 mm Knjdpebxkl Tefx Aahjf Coolant System Coolant tank capacity: 23 litres Net Weights Lathe on workbench, approx. 225 kg Lathe on cabinet base, approx. 550 kg

Kondisi: baik (bekas), Centre height: 102 mm Centre distance: 450 mm Spindle bore: 32 mm Reduction gearbox Left and right-hand rotation 2-speed drive Variable speed: 270-3000 rpm Knee-type control Swing over bed: 200 mm Knodpfscpznhsx Aahef Spindle nose: W 20 Tailstock quill: MT 2 Dimensions (LxWxH): approx. 140x56x123 cm Weight: approx. 550 kg Accessories included Manual available Various "Schaublin 102" versions available in stock!

Kondisi: baik (bekas), Right- and left-hand rotation with knee-reversing switch 2-stage variable speed Headstock with reduction gearbox Cross-slide with 90 mm travel Tripan tool holder 1 set W20 collets 2 drawers Kedod Htvdjpfx Aahonf Lamp 380 VAC Centre distance: 350 mm Centre height: 102 mm Swing diameter over bed: 200 mm Swing diameter over cross slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / stepless Tailstock quill: MT 2 Weight: approx. 500 kg Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Various "Schaublin 102" models available from stock!

Kondisi: baik (bekas), Working travels X / Y / Z: 475 / 330 / 280 mm Table size (W x D): 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2,800 rpm / 12 steps Spindle taper: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine dimensions (W x D x H): approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Range of movement: Longitudinal travel: Ksdpsd Dgdyofx Aahjnf Table: 330 mm* 1 handwheel revolution: 5 mm Vertical travel: Knee: 475 mm* 1 handwheel revolution: 2 mm Cross travel: Milling spindle carriage head: 400 mm 1 handwheel revolution: 5 mm * These two axes are fitted with automatic feed and can be controlled by programs. Minimum cycle time: 15 seconds or 4 program cycles per minute. Scale drum readout accuracy: 0.02 mm Main motor: Milling head: 2 speed settings Motor: 1.1 / 1.5 kW, 1500 / 3000 rpm Automatic feeds: Rapid traverse motor: 0.55 kW, 1000 rpm Rapid traverse, longitudinal: 2500 mm/min Rapid traverse, vertical: 1000 mm/min Feed drive motor: max. 0.2 kW Adjustment range, longitudinal: 4 - 500 mm/min Adjustment range, vertical: 1.6 - 200 mm/min Coolant system: Motor: 0.15 kW, 3000 rpm Coolant pump flow rate: 20 l/min Coolant tank capacity: 30 l

Kondisi: baik (bekas), Centre height: 130 mm Centre distance: 450 mm Spindle speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Various W25 collets available Various holders available Knsdpfx Ajcuhvuoahof BERGER LAHR axis motors Combitec EIP E-500 control unit Control unit manual included Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Various "Schaublin 102" models available in stock!