Beli Tabung Deburring Mesin bekas (79.175)

Kondisi: baik (bekas), Tahun pembuatan: 1995, EN-Version Model: Rotomat 180 Manufacturer: Egon Wutzke, Zell a. A., Germany Machine type: Bürst-Entgratemaschine (brushing deburring machine) Article number: 609 101-04 Serial number: 1071 Year of manufacture: 1995 Main features: - Main switch – red rotary knob (0/1) - Fault indicator – error signal light - Voltage indicator – power-on signal lamp Brush rotational speeds: - I: 800 rpm - II: 1600 rpm Working width: approx. 180 mm (hence the “180” designation) Type of processing: brush deburring (metal, aluminum, steel, plastics) Power supply: 400 V / 50 Hz (three-phase) Motor power: approx. 2.2 – 3.0 kW (depending on version) Speed adjustment: 2-stage (800 and 1600 rpm) Dust extraction connection: yes (extraction stub visible at the back of the machine) Safety features: emergency stop switch, mechanical interlocks, fault indication 🔹 Typical applications: - Removal of sharp edges after laser cutting, stamping, or milling - Processing of small and medium-sized metal parts - Surface preparation before painting, galvanizing, or welding For sale: EWU Rotomat 180 deburring machine I am offering for sale an EWU Entgrattechnik Rotomat 180 brush deburring machine, manufactured in 1995 by Egon Wutzke (Germany). The machine is fully functional, used, has undergone inspection, and is ready for operation. Technical data: • Model: Rotomat 180 • Manufacturer: Egon Wutzke / EWU Entgrattechnik • Year of manufacture: 1995 • Serial number: 1071 • Motor power: approx. 2.2 kW • Power supply: 400 V / 50 Hz (three-phase) Giedpfsw Uabijx Adtol • Speed ranges: 800 / 1600 rpm (2 steps) • Max. workpiece size: Ø 180 mm / square up to 127 mm • Dimensions: approx. 950 × 1125 × 1270 mm • Weight: approx. 350 kg • Hour meter: [enter current reading – photo shows 4451 h] • Equipment: nozzle for dust extraction connection Applications: • Deburring and edge rounding of pipes, profiles, steel and aluminum parts • Edge finishing after cutting, stamping, or milling • Surface preparation before painting, galvanizing, or welding Condition: • Machine is in good technical condition • Fully functional electrics and controls • Ready for operation, can be tested on site

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 Gisdpfxsttah Rs Adtsl ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: bekas, Triode tube oscillators for High Frequency welders: Godpfx Adovtp Huetoil - BW 1608J2F-R, manufactured by E.E.V.: NEW - BW 1185J2, manufactured by E.E.V.:

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, MESIN PENGHILANG GERINDA Gjdpsx Nht Djfx Adtsil

Kondisi: baik (bekas), Tahun pembuatan: 2011, Edges and contours - deburring machine ROLEI type: 00645-KKE2, year 2011. Gedswnpflepfx Adtjil

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, - Mesin dengan sabuk pengikis dan sikat rotasi - Jalur magnetik Data teknis: Lebar maksimal benda kerja: 300 mm Kapasitas beban meja maksimal: 100 kg Tinggi maksimal benda kerja: 0,5-100 mm Ukuran minimal benda kerja (L × P): 50×50 mm Kecepatan sabuk konveyor: 0,5 - 7 m/menit Ukuran sabuk pengikis (P × L): 1650 × 320 mm Sikat rotasi: 300 × 40 mm (1 buah) Konsumsi arus nominal: 11,5 kW Daya listrik masuk: 400V|50Hz 34A Dimensi mesin (P × L × T): 2,15 × 0,70 × 2,00 m Berat mesin: 1300 kg Gedpfx Adsx I Nu Hjtjil

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Stasiun pertama: penghilangan gerinda pada tepi pelat logam, Stasiun kedua: penghilangan gerinda pada takikan dan jari-jari luar, dengan sikat VA; ketebalan pelat maksimum: 5 mm Gijdpox I Abmefx Adtjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Perangkat ini dilengkapi dengan sabuk baru, sabuk cadangan, dan sikat tambahan. Dilengkapi juga dengan satu set lengkap sikat BOECK dengan kertas amplas serta sikat kawat tambahan untuk menghilangkan oksida seperti pada foto. Paket ini termasuk satu set sistem ekstraksi debu lengkap dengan filter—penghisap debu industri (perangkat filter-ventilasi) merek Keller. Giodpfx Aox Ht Rvsdtel

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Tahun pembuatan: 2004, CNC Rohrbiegemaschine / CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model/Type: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: CNC PC control Beckhoff Maximum tube diameter x wall thickness: 60 mm x 3 mm Minimum tube outside diameter: 16 mm Minimum bending radius to tube centre: 25 mm Maximum bending radius to tube centre: 240 + 50 mm Maximum bending angle: 180° Max. tube lift length: 1000 mm Bending direction: right Machine weight: 7,000 kg Total installed power: 39 kW Voltage: 400 V / 50 Hz Current: 100 A Machine dimensions: 6.2 x 3.2 x 2 m Equipment / Accessories Gijdpjxzubvefx Adtjl - Hydraulic pressure and feed for sliding rails - Automatic tube rotation and turning device - Electric mandrel bending unit - Pneumatic mandrel rod safety lock - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety fence Machine requires repair: The planetary gearbox of the transport trolley is defective and needs to be replaced. According to quotation, spare part costs are: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT (installation not included) The gearbox from the transport trolley is damaged and it must be replaced. Approximate costs for spare parts (without installation): - Planetary gearbox: €1,674 - Gearbox flange: €1,850 - Pinion: €850 Low-priced sale in as-is condition. Immediately available, including loading onto truck free of charge.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, nomor mesin/kendaraan: 0100-0149-2024, berat keseluruhan: 700 kg, panjang total: 3.500 mm, lebar total: 1.100 mm, tinggi total: 1.500 mm, DATA TEKNIS & PERLENGKAPAN: Giodoxm Symspfx Adtjl Cocok untuk material datar Panjang kerja: sekitar 2500 mm CATATAN PENGAMBILAN: Pengambilan harus dilakukan secara tegas antara 10 dan 12 Desember FCA Winterlingen, dimuat ke truk

Kondisi: bekas, Tahun pembuatan: 2023, nomor mesin/kendaraan: SN056444, Garansi 12 bulan. Gijdpfx Asx Hua Sedtol

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: - 1. Sabuk amplas untuk pengamplasan/deburring - 2. 8 sikat rotasi untuk pembulatan tepi - 3. Sabuk amplas untuk pengamplasan akhir - Meja vakum untuk daya rekat lebih baik pada komponen kecil Data teknis: Lebar benda kerja maks.: 1300 mm Kecepatan sabuk konveyor: 0,5 - 7 m/menit Beban meja maks.: 700 kg Ukuran benda kerja min. (L×P): 50×50 mm Tinggi benda kerja maks.: 0,5 - 100 mm Ukuran sabuk amplas (P×L): 2200 × 1320 mm Jumlah sikat rotasi: 8 unit Ukuran sikat rotasi: 300² × 40 mm Input listrik: 400V|50Hz|240A Daya terpasang: 79 kW Gsdpfxjx I Nugs Adtjil Dimensi mesin (P×L×T): 4,2×2,25×2,3 m Berat mesin: 5700 kg

Kondisi: bekas, Tahun pembuatan: 2004, Detail teknis: Diameter pipa: 20 mm Radius tekuk maksimum: 100 mm Kontrol program: S7-300 Panjang pengangkatan pipa: 2270 mm Gedpfou Ibzkox Adtjil Tekanan udara yang dibutuhkan: 7 bar Kebutuhan daya total: 15 kW Kecepatan pembengkokan: 540°/detik Tegangan kontrol: 24 V / DC Tegangan sambungan: 400V / 50Hz / 3 Fasa Dimensi P x L x T: Unit pembengkok: 1,8 x 1,4 x 1,6 m Dimensi P x L x T: Pengumpan: 1,2 x 1,5 x 1,55 m Dimensi mesin kira-kira PxLxT: 3,0 x 1,0 x 1,2 m Mesin pembengkok pipa dengan mandrel Arah pembengkokan: KANAN Pengoperasian via SIMANTIC Panel PC Pneumatik: Tekanan 7 bar; aliran 200 l/min Hidrolik: Tekanan 150 bar; aliran 6,8 l/min Perlengkapan/aksesoris: -Bak penampung oli 3,1 x 0,96 x 0,02 m -Beragam suku cadang dan alat bantu

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter 6 - 28 mm Wall thickness 2 mm Bending radius min. 2 x D Control system IPU 20 Bending radius max. 5.0 x D mm Max. bending angle 190° Mandrel length 3000 mm Operating pressure 180 bar Hydraulic motor 4 kW Gedpfx Asvtgn Njdtoil Machine weight approx. 900 kg Space requirement approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 preset bending angles and display in the control panel for angle specification, angle detection and angle measurement via absolute value rotary encoder, automatic tool table reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Control buttons: hydraulic on/off, operating mode selection, clamp close/open, feed forward/back, mandrel forward/back, bend forward/back, lock forward/back, mandrel lubrication, rotation device forward/back, table reset, length stop forward, emergency stop. The machine comes from prototype production and was only lightly used until 2000. Afterwards, the machines from this department were sold. However, the purchaser did not use the tube bending machine, so it has only been stored since then and has not been in operation (original paintwork). Machine offered at a special low price! This is a used machine; therefore, sale is made excluding any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.

Kondisi: baru, Tahun pembuatan: 2025, Kartonhülsenwickelmaschine für Toilettenpapierrollen Spezifikationen: • Kartonbahn-Breite: 60 – 76 mm • Produktionsgeschwindigkeit: 35 – 40 m/min Gjdeit N Rvopfx Adtsil • Hülseninnendurchmesser: 40 mm – 80 mm • Lagenanzahl: 2, 3, 4 Lagen (weitere optional) • Abschneidelänge: 600 – 2900 mm Ausstattung/Merkmale: • Betrieb wahlweise mit Heiß- oder Kaltleim • Wechselbare Dornaufnahmen (für verschiedene Hülsengrößen) • Quetschschnitt über zwei oder drei Rundmesser mit synchronisierter Bewegung • Elektronisch, stufenlos regelbare Geschwindigkeit (Drehstrom)

Tahun pembuatan: 1995, Kondisi: bekas, de-001 Gisdjx Hp Azjpfx Adtjl

Kondisi: baru, rohrdurchmesser-maschinenbeschreibung Gijdpfx Adoxab E Sjtol

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Mesin bekas Tahun pembuatan: 2007 Godpex I Hihjfx Adtsil Lebar kerja: 1000 mm Dengan karpet vakum Termasuk pompa vakum Sikat Fladder, grit 100 + satu set sikat tambahan grit 100

Kondisi: bekas, Tahun pembuatan: 1988, used condition year of manufacture: 1988 stock number: 090151 delivery time: immediate, subject to prior sale country of origin: Italy price: €12,800 in stock: 1 max. diameter (steel tube): 42 mm length: 4,665 mm width: 800 mm height: 1,160 mm weight: 1,470 kg steel tube: 42 x 2.5 mm square tube: 40 x 1.2 mm Gsdpfx Ajxx A Ekjdtjil rectangular tube (horizontal): 30 x 40 x 1.7 mm rectangular tube (vertical): 40 x 30 x 1.3 mm max. bending radius: 255 mm min. bending radius: 22 mm max. bending angle: 180° speed: 90°/s motor: 5.5 kW hydraulic tank capacity: 120 l capacity data refer to 400 N/mm² maximum bending radius with tube guide rolls: 255 mm maximum bending radius with tube guide slide: 175 mm smallest bending angle: 4° max. usable length without positioning device: 3,900 mm max. usable length with positioning device: 3,370 mm drawbar pull adjustable from: 8 mm opening and closing stroke of counterpressure jaws: 0–45 mm opening and closing stroke of rolls or slides: 12–22–42 mm operating manual in German machine does not comply with AMVO or UVV without tools

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), Machine for electrochemical deburring including automation, rinsing system for removal of electrolyte from the workpiece surface, and filtration unit. Gijdpfx Aslgzbnodtsl

Kondisi: baik (bekas), Tahun pembuatan: 2013, jam operasional: 2.300 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 630124, ENTGRAT MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. clearance: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller diameter: 420 mm 50 oscillating strokes per minute Drive motor: 15 kW Abrasive belt size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed dimensions (L x W x H x Working width x Sheet thickness): 2,704 x 385 x 1,650 x 0.8 – 100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8 – 100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8 – 100 mm Outfeed (belt cleaning): 2,704 x 290 x 1,650 x 1,500 x 0.8 – 100 mm Deburring module: Power Electric Pneumatics Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module: 12 24 6/80 2,500/725 1,600 kg Rotor module: 20 40 6/10 4,500/25 1,800 kg Outfeed module: 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Pneumatics: 6 bar, dry and oil-free Godjxuu Dkepfx Adteil Feed rate: 0.5–4 m/min stepless (optionally 1.0–8 m/min stepless) Working height: 1,000 mm External filter is not included in the sale. Processing width 1,500 mm, thickness up to 100 mm; vacuum belt runs the entire machine width. The first unit is a grinding roller (foam rubber roller with abrasive paper and pneumatic tensioning), which can also oscillate and levels the burr. The second module consists of two steel wire brush rollers to round/break edges. Afterwards, a rotor module (rotating multi-brush head) is used for fine edge rounding. EC Declaration of Conformity Dry dust extractor is not included, but we can immediately offer you a suitable unit (OPTION). Operating instructions The machine is sold without an infeed roller conveyor!

Kondisi: bekas, Tahun pembuatan: 2007, arbeitsbreite_1100_de Gisdpox Hp Ansfx Adtjl

Kondisi: baru, trans_001 Gijdjxaa Sdspfx Adtel

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 3.550 h, Fungsionalitas: berfungsi sepenuhnya, Used machine Year of manufacture: 2018 Technical specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0 – 100 mm Speed 1st unit, frequency controlled: 5 - 15 m/sec 2nd unit, frequency controlled: 6 - 17 m/sec Feed speed, frequency controlled: 0.2 - 8 m/min Electricity Main motor 1st unit - W: 7.5 kW Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit - W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Air consumption: 45 l/min Gisdpfx Adex I Ed Rstol Dust extraction per unit Required output at 100 mm WS: 6,100 m3/h Machine weight: 3,750 kg Accessories / Special equipment Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction system Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Including H14 filter - Including ATEX version for aluminum - Including sludge container

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 250 h, nomor mesin/kendaraan: 0131, jenis kontrol: Kontrol NC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: hidrolik, Diameter pipa (maks.): 48 mm, Panjang pipa (maks.): 3.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 180 °, berat keseluruhan: 670 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, jumlah tampilan digital: 1, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, sistem pelumasan terpusat, T U B O M A T - simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small batch production. With the software, each tube can be parameterized, simulated, and saved. The bending data is then transmitted to the machine via a network (LAN). Standard Bending Equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Well-known 4-stage bending angle preselection or program mode - 80 memory slots for up to 10 sets each - Setpoint/actual value display for bending angles - Compact, extended bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven manual lever - Hydraulic tube clamping - Hydraulic pressure die adjustment - Hydraulic mandrel extraction - Mobile machine design - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base mount as drive unit for assembly attachments Technical Data - Tube range up to: 48.3 x 3.25 mm (E235 with Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Maximum bending angle: 180° (+ 10° overbend) - Bending accuracy: ± 0.2° - Bending speed: 20°/s - Dimensions (L / W / H): 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Connection data: 400 V / 50 Hz / 3-phase Gsdox E Rdwopfx Adtjil - Power supply protection: CEE 16 A - Color: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic Package tube bending software - Oracle Express database for single-user application - Creation of isometrics (single tube) - ConCSVImp - CSV format import interface - Calculation of bending data considering springback, elongation, and swelling - Verification of clamping lengths, start, and end lengths - Output of bending data (printout) - BendSim - Bending simulation and graphical representation through parametric tool configuration - BendCon - Creation and transmission of NC bending data for TUBOMAT - Data transfer via LAN Tool Holders 1 adapter set for bending rolls with 25 mm mounting bore 1 clamp adapter, installation space 100 mm 1 support for fixed pressure die, installation space 100 mm Tools Bending tools consisting of bending roll, clamping piece, and pressure die (fixed) Tube Diameter / Bending Radius - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Bending Mandrels 3000 mm for Steel Tubes Design with lubrication channel for minimum quantity oil lubrication - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy-duty design) Pipe Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Counter plates for pre-assembly of cutting rings with automatic pressure setting for steel and stainless steel tubes Pipe Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses available on request. The machine is used but in like-new condition. The machine can be viewed and demonstrated by appointment. The machine must be collected from our premises but can be loaded by us. Commercial sale – price plus 19% VAT. Subject to prior sale and errors.