Beli Tenon bekas (409)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Unicontrol 12 Consisting of: Cross-cutting unit (Pos. A), Tenoning and slotting spindle (Pos. C), Transfer conveyor (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling mill right (Pos. P) For the production of individual parts and components, either frame-based or in series production. Comprises a cross machining unit and a longitudinal machining unit connected by a transfer conveyor. Working width: 40-140 mm (see pressure fence left 40 - 140 mm) Working height: 40-120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal machining: approx. 220 mm + 2 x end profile length Max. workpiece length: 3500 mm The dimensions of the parts depend on the machine configuration, type of production, and tooling setup. Final definition of part dimensions is only possible after receipt, review, and approval of the complete and final tooling layout drawings. Cross machining: Table feed motor power: 0.3 kW (0.4 HP) Feed speed when sawing, profiling, and in return preset: 3-25 m/min Vario table with (possible for studio/architectural window production) The clamping length of all tenoning and slotting spindles can be used without tool change gaps. Workpiece clamping by means of clamping bridge. Operated via a clamping cylinder installed under the table. Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° Minimum workpiece length for angled windows depends on the angle and timber width. Possible part dimensions for angled window production: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm Bodpfx Ahjumci Se Uoww +/-90° 350 mm 185 mm For angles greater than 60°, only counter processing Commission not documented 1) NC angle adjustment automatic for angled part machining Tear-out protection via follow-up counter along the entire spindle length of the tenoning and slotting spindle for 90° machining. Manually trackable counter-timber strip for angled part machining. 2) Additional counter timbers

Kondisi: baru, Tahun pembuatan: 2025, de Bodshwv N Hjpfx Ah Usww

Kondisi: bekas, *Available from approx. end of 2025* Fully automatic finger-jointing line for the following dimensions: - Thickness: approx. 24 – 100 mm - Width: approx. 80 – 240 mm - Finger-joint length: 400 – 1,500 mm - Finished length: 2.50 m – 13.50 m steplessly adjustable Comprising the following components: - SMB vacuum destacking unit, longitudinal, with 2 lift tables and 2 package roller conveyors, year 2013 Maximum package dimensions: 1.20 x 1.20 x 6.00 m Bwsdpfx Ajvvi Tyjh Ujw 4 suction pads, Sicko system Singulation and feeding into roller conveyor for scanner loading, board turner, diverter for wood too moist/too dry, diverter for B-grade quality, marking station or automatic mode - Bidac front-end scanner for warping detection, year 2013 - Brookhuis moisture meter FMI 5, year 2019 - Microtec Goldeneye 502 scanner, year 2012, with X-ray, 4 color cameras and new optimization software - Dimter Opticut 350-2, year 2003, with paddle ejector (added 2009), including corresponding sorting belts and pneumatic ejector for 2 additional grades - NKT packaging equipment - NKT finger-jointing line with Specialpack rotary table AH 1050, year 2005, consisting of: milling machine, tilt station, infeed line (length 5.0 m), cycle press (length 6.00 m), cross-cut saw - SMB stacker, year 1998, 2.50 – 13.50 m length, divisible into 2 units (e.g., 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually and steplessly adjustable stop, electro/hydraulic Maximum package width: 1200 mm, maximum package height: 600 mm, hydraulic package pusher Location: Customer

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, CML - DEP LINI FLEKSIBEL UNTUK PRODUKSI ELEMEN JENDELA SESUAI DENGAN DENAH LY-09-087-05 TANGGAL 27/01/2010 01 KONVEYOR SABUK 1=4500 mm 02 TRANSFER "L" DENGAN ROLLER BERLAPIS PVC DAN PENAMPUNG 03 TENONER DOUBLE END CML MOD. STDA 336 Bwodpfoxtaciex Ah Uew 04 SISTEM KONTROL MESIN LENGKAP LIHAT SPESIFIKASI TEKNIS PADA FILE PDF TERLAMPIR

Kondisi: bekas, Number of spindles: 3 pcs. Number of tool sets: 1.3/4.1 pcs. Spindle diameter: 50, 40 mm Spindle length: 120, 320, 125 mm Weight: 2,500 kg Loading dimensions (L x W x H): 3,800 x 1,400 x 2,000 mm Table length: 3,470 mm Weinig Univar 6 P For sale on behalf of client ----- Operating voltage: 380 Volts, 50 Hz. For re-profiling windows, doors and similar objects with profiles that are not symmetrical all around. Arrangement of units: 1. Climb-cutting spindle, right, pneumatically actuated. 2. Profiling spindle, right 3. Fitting spindle The profiling spindle is suitable for accommodating several tools stacked above each other. Spindle movement is pneumatic. For tear-free re-profiling, the first spindle operates in climb-cut mode. The last 100 mm of each frame end is machined by dipping this spindle with the appropriate tool into the wood to avoid tear-out at the frame corners. Machine frame, tables, fences: Machine body constructed from heavy, torsion-free and vibration-damping elements. Right-hand stops in the profiling area are made of Pertinax. In front of the profiling spindle, a split stop with sliding bar for short parts. Additional support rail for large-format frames. Feed system: Continuous, chainless feed system equipped with rubber rollers. Air-blast device for feed rollers and table. Spindles, hood: Spindles feature high concentricity and are dynamically balanced. Extraction hoods are designed for optimal chip evacuation. Quick tool change due to easy-to-open hood covers. Machine operation, setup aids: Machine operated from the front. Adjustment of the stops to the tool diameter is via mechanical digital readout. Machine electrics, motors, control: Electrical configuration according to DIN VDE 0113 – Electrical Equipment of Industrial Machines EN 60204 IEC 204-1. Other electrical standards are not considered. Motors are dynamically balanced. Tool position selected via rotary switch on the control panel. Tools: The machine is supplied with operating tools but without machining tools. SPINDLE 1 Climb-cutting spindle Number of tools: 1 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 120 mm Max. tool diameter (re-profiling): 232 mm Tool base circle: 112–140 mm Basic position below table: 10 mm Motor power: 4 kW (5.5 kW) SPINDLE 2 Number of tools: 4 Vertical spindle stroke: 3 x 80 mm = 4 tools optionally switchable to 2 x 95 mm = 3 tools Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50 mm / 35 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenons: min. 245 mm Max. tool diameter: With base circle 112 mm: 210 mm With base circle 140 mm: 232 mm Max. tool diameter (re-profiling): 232 mm Tool base circle: 112–140 mm Basic position below table: 10/5 mm Motor power: spindle: 11 kW; feed: 1.1 kW Feed of profiling unit: stepless 6–12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenons: min. 245 mm Special equipment: Bwjdjxpi Elopfx Ah Ujw 3 mechanical spindle br...

Kondisi: baik (bekas), Lebar kerja dari 190 hingga 2600 mm Ketebalan benda kerja 8 – 90 mm Tinggi kerja 90,5 cm Perlengkapan: 1. Pisau penoreh 1,5 kW terkontrol 2. Pemotong 4,5 kW, dapat dimiringkan 15 derajat 3. Motor frais 4,5 kW dengan kontrol elektropneumatik untuk aplikasi frais tenggelam Bwodpfsxrx Uujx Ah Usw

Kondisi: bekas, Tahun pembuatan: 1987, en-GB: Technical Details: Pitch Circle Diameter max: 360/24 mm Machine weight approx.: 46 kg Centre height: 130 mm Swivelable: yes Rotational movement: 360 degrees Dimensions: 350 x 450 x 260 mm Application: For auxiliary tasks, e.g. marking out divisions - Dividing head with 125 mm chuck on a 360° pitch circle - Clamping is carried out via index pin with locking positions - Pitch circle: 24 - Chuck: Ø 125 mm, with rotating scale; through bore Ø 17 mm; without clamping jaws - Baseplate: size 260 x 300 mm, with 2 T-slots WxL: 15 x 21 mm - Chuck key - 2 piece T-slot nuts fr-FR: Détails techniques : Diamètre du cercle de division max : 360/24 mm Poids de la machine env. : 46 kg Bwjdsu Nlg Tepfx Ah Uow Hauteur de pointe : 130 mm Orientable : oui ° Mouvement rotatif : 360 degrés Dimensions : 350 x 450 x 260 mm Application : Pour travaux auxiliaires, par ex. traçage de divisions - Plateau diviseur avec mandrin Ø 125 sur cercle de division 360° - Serrage via verrouillage à index - Cercle de division : 24 - Mandrin: Ø 125 mm, avec échelle graduée; alésage traversant Ø 17 mm ; sans mors - Plaque de base : 260 x 300 mm, avec 2 rainures de fixation Lxl : 15 x 21 mm - Clé de mandrin - 2 pièces de tenons à rainure

Kondisi: bekas, Tahun pembuatan: 2001, en-GB - Year of manufacture: 2001 - Documentation available: No - CE mark present: Yes - Serial number: 8756 - Main motor power [kW]: 7.5 - Table length [mm]: 2500 - Table width [mm]: 500 - Max. tool diameter, milling head [mm]: 160 - Max. tool diameter, tenoning hood [mm]: 160 - Tilting spindle: Automatic - Spindle height adjustment: Automatic - Motor with brake: Yes - Feed unit included: Yes - Brand: Mec4v - Model: Mec4v - Number of wheels [pieces]: 3 - Number of speeds: 2 - Fence included: Yes - Brand: Aigner - Options: Tenoning hood - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Stepwise Financial Information VAT: The stated price is subject to VAT VAT/margin scheme: VAT deductible for businesses Bodpfx Aewwa Hreh Ujww Delivery and trade-in possible at any time for all industrial sector equipment Yorick Diebels

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 140 h, Fungsionalitas: berfungsi sepenuhnya, Mesin press Mark-8 adalah press satu silinder tipe "Schwanenhals" dengan meja-meja independen. Bodexqryzepfx Ah Uoww Fitur: Press tipe "Schwanenhals" satu penyangga. 12 meja logam, 1 meja utama, 2 meja kaki, 4 meja panah silang, 4 meja pasak ekor-baji, 1 meja pasak ekor-baji. Meja individual dengan penyesuaian elektromagnetik Sistem penyeimbang dengan instalasi hidrolik terintegrasi yang bergerak sepanjang balok IPN. Keunggulan: Kesederhanaan dan efisiensi biaya Ergonomi dalam penggunaan Kemampuan untuk memproduksi rumah pertanian besar. Integrasi sistem pendorong sebagai opsi memungkinkan.

Kondisi: baru, Tahun pembuatan: 2025, Eine kompakte Blech-Faserlaser-Metallschneidmaschine mit Vollschutz Kompakte Bauweise mit geringem Platzbedarf vereint vollständige Schutzfunktion und erhöhte Sicherheit. Jeder Rahmen des Maschinenbetts wird nach dem traditionellen Schlitz-und-Zapfen-Verfahren verschweißt, um optimale mechanische Eigenschaften sowie höchste Stabilität und Festigkeit zu gewährleisten. Der ausziehbare Schneidtisch – optional auch elektrisch – spart Platz und verbessert das Benutzererlebnis. Schnelles, komfortables Öffnen und Schließen per Knopfdruck; Die Laserschneidertür ist dank Zahnstangen-Antrieb und selbstverriegelndem System sicher und zuverlässig. Faserlaser-Köpfe können aufragende Hindernisse erkennen, um den Beschädigungsgrad effektiv zu reduzieren und Wartungskosten einzusparen. Bwodpfx Ajhwrghjh Uew Geeignete Materialien: Metall Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W, 12000W Schneidbereich: 3048*1524mm Schneidgeschwindigkeit: 0-100m/min Positioniergenauigkeit: ±0,05mm Wiederholgenauigkeit: ±0,03mm Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC: Ja Kühlungsart: Wasserkühlung

Kondisi: bekas, Slot spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled, radial and axial ----- Machine was factory overhauled by Weinig in 2024. During the overhaul, the control system was also updated to Siemens S7 677 C with a new “Touch” membrane panel. Equipped with the following machining units: Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically in 8 positions for edge rounding from above Bottom-mounted edge rounding unit ----- axial adjustment together with the cross-cut saw Tenoning and slotting spindle ----- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm tool swing diameter min. 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial adjustment travel 580 mm axial adjustment speed 100 mm/sec 1st profile spindle (climb and conventional milling) ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit (top) ----- motor power 3 kW Bwedoxpi Dujpfx Ah Uow spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit (right side at machine outfeed) ----- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional equipment: ----- CNC-controlled length stop, mounted on slotting table, for workpiece lengths up to 3500 mm, incl. cross-cut saw position integrated in control. Studio sash window device, swiveling ±60° Twin part package with automatic singulation and transfer Climb milling facility with window automation for window rebating Rebating cart for rebating of small sash widths Climate unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, incl. return belt for transporting workpieces back to operator (Technical data according to manufacturer – no liability accepted).

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis laser: laser serat, daya laser: 6.000 W, ketebalan pelat baja (maks.): 25 mm, ketebalan maksimum lembaran baja tahan karat: 18 mm, tebal plat aluminium (maks.): 10 mm, panjang kerja: 2.000 mm, lebar kerja: 1.000 mm, kecepatan pemotongan: 91.000 mm/menit, berat benda kerja (maks.): 400 kg, daya: 6 kW (8,16 hp), jenis pendinginan: air, berat keseluruhan: 3.110 kg, panjang total: 4.049 mm, lebar total: 1.755 mm, tinggi total: 2.230 mm, Perlengkapan: ekstraksi asap, henti darurat, unit pendingin, Konfigurasi: • Sumber laser Bodor Power 6 kW • Kepala pemotong laser Bodor Genius dengan autofokus • Sistem kontrol Bodor Thinker 3.0 • Ranjang dengan struktur pasak dan lubang pasak • Motor servo dan penggerak Bodor • Katup pengatur oksigen dan katup pengatur nitrogen Bodor • Monitor 21,5 inci dengan fungsi sentuh • Perlindungan pembukaan pintu • Ranjang geser yang mudah diakses • Teknologi perforasi Bodor Lightning • Penyesuaian tekanan gas pemotong otomatis Bwodpew U Am Iofx Ah Uew • Basis data ahli untuk teknologi pemotongan laser • Fungsi anti-tabrakan aktif • Remote control ergonomis (Bodor Mango®) • Proteksi anti terak • Nozzle hemat gas dengan aliran stabil • Pengingat perawatan cerdas • Koneksi internet WIFI • Alarm gangguan laser • Pendingin air • Sistem ekstraksi asap

Kondisi: belum diuji (bekas), Koneksi listrik 380V 5,5kW, putaran kanan/kiri, dua kecepatan listrik, diameter spindle 30 mm, penyesuaian ketinggian spindle dengan handwheel 180 mm, spindle tidak dapat dimiringkan, 6 kecepatan: 3000/4000/5000/6000/8000/10000 rpm, dimensi (PxLxT): 1200 x 1200 x 1100 mm, berat sekitar 1000 kg, lengkap dengan perangkat pembuat tennon / meja geser Bedexqp Ngspfx Ah Uoww

Kondisi: seperti baru (mesin pameran), Four-Sided Planer GAU JING GN 6S23 TECHNICAL SPECIFICATIONS: – 6 cutterheads – Electric brakes – Electric planing thickness adjustment – Universal spindles – Suitable for wet and dry timber – Used planer, very good condition – Max. working width of element: 230 mm – Max. working height of element: 160 mm – 6 spindles: 1) Bottom horizontal 230 mm 7.5 kW 2) Right vertical 160 mm 7.5 kW 3) Left vertical 160 mm 7.5 kW (3rd spindle adjustable electrically front/back 0.4 kW) 4) Top horizontal 230 mm 18.5 kW (4th spindle adjustable electrically up/down 0.4 kW) 5) Bottom horizontal 230 mm 7.5 kW 6) Universal 230 mm 7.5 kW – Universal spindle adjustable electrically up/down – All spindles adjustable up/down, right/left – All spindles equipped with electric brake – Spindle diameter 1,2,3,4,5: 50 mm – Universal spindle diameter: 40 mm – Top: 6 powered feed rollers, steel, knurled, swiveling, including 2 double rollers – Top: 5 powered outfeed rollers, rubber, smooth, including 3 double rollers – Bottom: side pressure at infeed – Bottom: 2 powered feed rollers, knurled, steel, swiveling Bedpfx Ahjul Ulps Uoww – Bottom: 2 lateral pressure rollers – Bottom: 2 powered outfeed rollers, smooth, steel – Feed via cardan shaft rollers – Rollers pneumatically pressed – Infinitely variable feed speed via inverter – Feed motor 5.5 kW – Electric planing thickness adjustment at two spindles – Lifting motor 0.37 kW – Infeed table length: 1800 mm – Centralized lubrication – Extraction socket diameter: 6x125 mm – Enclosed in a cabin MACHINE DIMENSIONS: – Length: 5100 mm – Width: 2250 mm – Height: 1850 mm – Weight: approx. 5500 kg Machine can be tested onsite. Leasing and installment payment options available. WE ARRANGE TRANSPORT JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE German language support available at: +48 663 495 647 We offer the following machines: Bandsaws, circular saws, crosscut and panel saws, thicknessers, jointers, sanders, horizontal and vertical borers, stock feeders, grinders, four-sided planers, three-sided planers, double-side planers, thickness planers, jointer-thicknessers, surface planers, cleaning machines, dowel machines, rod making machines, flooring machines, edgers, rounding machines for log homes, moulders (bottom spindle, top spindle), sanders (long belt, wide belt, through-feed, roller, disc, angle), drilling machines (horizontal, radial), multi-spindle moulders, edgebanders, presses, lathes, sawmills, briquette presses, shredders, tenoners, mortisers, dust extractors, dust collectors, fans, blade sharpeners, compressors, multi-function machines, etc. Manufacturers such as: SCM, MARTIN, ALTENDORF, JAROMA, MAGGI, GOMAD, GOMAG, GOMA, BAUERLE, WEINIG, WINTER, KOFAMA, FELDER, ŻEFAM, SICAR, TOS SVITAVY, KUPFERMUHLER, SANDING MASTER, SCHNEIDER, BUTFERING, DANSKAERT, ZOTECH, SAFO, HARBS, HOLZ-HER, ROBLAND, PEMAL, BEZ, KRAKOWSKA, NIEMIECKA, OPTIMAT, JONSDORF, LIGNUMA, OTT, SOP-MASZ, NOES, GUBISCH, HOUFEK

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C431-Q11, Balestrini double-headed tenoning machine model T0 Two working tables For round and longitudinal tenons Various adjustments: height, width, length, etc. Tenoning machine fully refurbished, including electrical cabinet, automation system, and sensor. Bjdpfxew A Rp Is Ah Uoww Can be seen in operation at our premises Equipment price loaded Transport and installation possible at extra cost.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Sistem Penjepit Mircoloc kami beli untuk digunakan pada Mesin Hurco kami (seperti yang terlihat pada gambar terlampir). Sistem ini hanya digunakan sebentar sebelum kami mengubah proses produksi dan menggunakan mesin lain. Karenanya, perlengkapan ini telah disimpan selama empat tahun terakhir dan masih dalam kondisi sangat baik. 2 Unit x Mircoloc Half Tenons (Bed) 650mm Lebar x 650mm Panjang x 55mm (tinggi) 40 Unit x Mircoloc 31,4mm Vice Assembly 20 Unit x Mircoloc Soft Steel Locator 40 Unit x Mircoloc Soft Jaws 20 Unit x Soft Locator Aluminium Saya lampirkan gambar teknis dan katalog Mircoloc untuk menunjukkan produknya. Sistem ini sangat mudah digunakan dan banyak komponen tersedia langsung dari pabrikannya. Bwjdpfx Ahjxpwdvs Uow

Kondisi: bekas, Slot spindle 1 pc Bwedpsxmk Dwsfx Ah Usw Number of milling units: 3 pcs Spindle diameter: 50 mm Approximate weight: 7,500 kg Gubisch Type EST-H 2000/2 ---- Machine still in operation and available for inspection! Manufacturer's description: ---- Single-sided angle combination for window and door production consisting of tenoning & slotting machine, angle transfer unit, and milling machine Cross-cut saw: ---- Power: 3 kW Speed: 3,000 rpm Saw blade diameter: 400 mm Flange diameter: 80 mm Adjustment: horizontal, manually adjustable, can be read on mechanical digital display Adjustment range: 0–120 mm Length stop LAS: ----- Adjustment: manual Length: extended to 3.2 m Slotting unit (cross machining) ----- Power: 9.2 kW Speed: max. 4,500 rpm (but depends on your tools and will be adapted accordingly) Clamping height: 300 mm Useful height: 300 mm Shaft diameter: 50 mm Max. tool diameter: 400 mm; Min. tool diameter: 240 mm Adjustment: vertical Vertical adjustment range: 210 mm below table Number of tool sets: 3 x 100 mm tool length per set; customer-supplied zero height 10 mm Shortest workpiece: 320 mm + tenon Narrowest workpiece: 48 mm Widest workpiece: 170 mm 1st profile spindle ----- Spindle position: vertical right Function: profiling and automatic climb-in Power: 9.2 kW Speed: 6,000 rpm Clamping height: 100 mm Useful height: 100 mm Diameter: 50 mm Cutting circle diameter: 100–240 mm Adjustment range: horizontal 70 mm, tool zero height 10 mm Number of tools: 1 x 100 mm maximum clamping length 2nd profile spindle ----- Spindle position: vertical right Function: profiling Power: 9.2 kW Speed: 6,000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Cutting circle diameter: 100–240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool zero height 10 mm Number of tools: 3 x 100 mm maximum clamping length 3rd profile spindle ----- Spindle position: vertical right Function: profiling Power: 9.2 kW Speed: 6,000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Cutting circle diameter: 100–240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool zero height 10 mm Number of tools: 3 x 100 mm maximum clamping length 4th profile spindle (glazing bead saw unit) ----- Spindle position: horizontal top, right Power: 3.0 kW Speed: 3,000 rpm Cutting circle diameter: 250 mm Clamping flange bore: 60 mm diameter Hydraulic adjustment: automatic up/down, forward/back for 1 base height and 1 base depth Other technical specifications ----- Workpiece clamping table, slotting unit: ----- Mounted on ball bushing and roller guides Manual swivel range: 60° in both directions Feed speeds: 0–28 m/min, infinitely adjustable 4 speed ranges: rapid feed to slotting unit, slower feed in cutting area, rapid feed for transfer, rapid return Counter support: counter support changes automatically with spindle stroke Transfer in profiling area: fully automatic Operating mode: individual piece production, batch frame production, and series production possible Longitudinal profiling ----- Bre...

Kondisi: baik (bekas), Tahun pembuatan: 1996, EN-KRUSI-Chalet-Construction-Machine-Blockhouse-Production-Line- Type-CM-40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / operational Operating principle: Processing of structural timber for chalet construction / log house manufacturing Beams can be machined in a single pass • Cross-cutting • Horizontal and vertical milling of tenons / grooves in one clamping • Drilling • Milling of face grooves Workpiece: • Maximum cutting height: 200 mm • Maximum cutting width: 250 mm Robust welded steel construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground linear guides for highest machining precision. Carriage runs on dust-protected and preloaded ball bearing guide rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control system. Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for external chip extraction, with 2 eccentric clamps, without milling tool (rebate cutter). With electro-controlled hydropneumatic horizontal and vertical feed, feed is synchronized with the start of the milling motors. Rapid traverse and feed rate continuously adjustable. Completely wired and installed, including air maintenance unit. Timber thicker than 14 cm must be machined in two passes. Such pieces must be repositioned to compensate for the excess thickness for second milling. Machine safety covers over moving parts with gas spring counterbalancing. Machine description / equipped with: 1. Sawing unit: Manual feed Bwedpfeu Uh T Dox Ah Usw Spindle adjustment with analog gauge Max. saw blade diameter / bore: 400 / 30 mm Carbide-tipped with chip depth limiter (downcut) Adjustable riving knife Motor speed: min-1 / 2900 Power: 2.2 kW 2. CM milling unit (log house unit) Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter diameter: 180 mm Max. cutter width: 130 mm (For cutter width from 60 mm, only use cutters made of aluminum alloy with indexable inserts) 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and feed rate infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog indication Collet chuck: ER 25 Clamping diameter max: 16 mm Drill diameter max: 32 mm Motor: min-1 1450, 1.8 kW 4. Face-milling unit Hydropneumatic feed Spindle adjustment with digital display Max. cutter diameter: 230 mm Max. cutter width: 60 mm Motor: min-1 / 2900, 3.0 kW 2 v-belts SPZ 9.5x1000 La Pneumatics: Customer-side operating pressure min/max: MPa (bar): 0.7/1 (7/10) Compressed air consumption: 8 Nm3/h Electrics: Operating voltage: V / Hz 380, 50 Rated power: 8.8-15.8 kW depending on configuration Customer-side fuse: 3 x 25 A (slow blow) Max. simultaneous power consumption: 4.4 kW Dimensions: Machine width: 2400 mm Machine depth: 1600 mm Total height, guard down: 1600 mm Total height, guard up: 2200 mm Extraction port diameter (bottom extraction): Approx. weight: 1300 kg Incl. 2 x 6 m (2 x 4 m) roller conveyors Technical specifications subject to change!

Kondisi: baik (bekas), Tahun pembuatan: 1993, Mitre saw, saw unit right/left, double mitre saw, crosscut and mitre saw, double-end profiler -Manufacturer: Emmegi, Pressta Eisele, Double Mitre Saw Type SINGLE 2 HM500 Bodpfotxkprex Ah Ujww -Cutting length: 250 to 5000 mm -Saw units: swiveling 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm, cutting width 160 mm -Cutting data 45°: Cutting height 260 mm, cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Kondisi: baru, Robust craftsman’s machine with spindle moulder tiltable ±45° and MK 4 interchangeable spindle - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Especially robust design - Smooth operation thanks to precision components and high dead weight - Standard with forward/reverse rotation and electronic lock when changing direction - Five speeds from 3,000 – 10,000 rpm - Speed change is simple and convenient from the machine side - Standard with MK 4 interchangeable spindle system - Large cast-iron worktable for long-lasting accuracy - Easy operation via controls and speed display on the front of the machine - Large professional milling fence with fine adjustment and aluminium fence jaws as standard - Fence adjustment via handwheel with numeric display - Numeric display of spindle height, accurate to a tenth - High-performance industrial motors Scope of delivery: Technical data: Dimensions and weights: Net weight: approx. 510 kg _____ Extraction ports: Port diameter at fence: 1 x 120 mm Port diameter at machine: 2 x 80 mm _____ Worktable: Table length: 2,500 mm Table width: 810 mm Table height: 923 mm _____ Installation information: Space requirement: Dimensions take into account maximum traverse paths or usable lengths. Working area length: 3,700 mm Working area width/depth: 5,000 mm Note on working area: Please add the figures given to the space requirement to obtain the recommended free installation area for the machine. _____ Equipment: Milling fence: Heavy-duty professional design with aluminium fence jaws and fine adjustment, adjustment from the front via handwheel with numeric digital display Curved milling safety hood: YES Spindle height adjustment: manual Spindle tilting adjustment: manual Control: manual height and tilt adjustment of the milling unit Position of controls: on machine body Table design: table extension left and right and extendable workpiece support (total width 2,500 mm) _____ Electrical data: Connect voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW _____ Milling spindle: Spindle tilt: -45 to +45° Usable spindle length: 140 / 180 mm Note on usable spindle length: for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm Milling spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speed(s): 3,000/4,500/6,000/8,000/10,000 rpm _____ Maximum milling tool diameters: Max. tool diameter, retractable: 320 x 60 mm Max. tool diameter, profile milling: 250 mm Bwsdpexnqx Refx Ah Ujw Max. tool diameter, tenoning: 350 mm Max. tool diameter, contour milling: 160 mm

Kondisi: bekas, Tahun pembuatan: 2007, Slot spindle 3 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Control 100 PC SCM Windor 100 CNC (still in operation, can be inspected until end of December 2025) ----- Powerful and flexible CNC production line for windows and doors Processing of workpieces up to a maximum of 4500 mm in length, 250 mm in width, and 150 mm in thickness Consisting of Windor 60, version B Infeed conveyor Slot section: ----- Pos. 1: Cross-cut saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Pos. 2: 1st slot spindle ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" counter setup - Infinitely variable vertical positioning - Interpolating rotation, automatic bevel window facility +/- 60 degrees Pos. 3: Electrospindle with HSK 63 F tool holder ----- - Min/max speed 1000-12000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 4: 2nd slot spindle ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" counter setup - Infinitely variable vertical positioning - Interpolating rotation, automatic bevel window facility +/- 60 degrees Pos. 5: 3rd slot spindle ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" counter setup - Infinitely variable vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following operations in through-feed: Lock case routing and 9-degree Anuba hinge drillings from the right. Dowel hole drilling and strike plate markings from left and right, each with 7 spindles. Cup hinge drilling and olive handle drilling from above. Profile section ----- Pos. 5: Power 2000 F4: Electrospindle with HSK 63 F tool holder ----- - Working from the left - Min/max speed 1000-18000 rpm - Maximum motor power 12 kW Bwedpsw Im Iiofx Ah Uew - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 6: 1st profiling spindle from the right ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 2nd profiling spindle from the right ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 3rd profiling spindle from the right ----- - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm...

Kondisi: baru, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 units S&S electrohydraulic frame press type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Bwodjd Rzc Ropfx Ah Uow Optional equipment available: central pressure beam, device for angled windows, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner connections optional), CE-certified version The only fully automatic, high-performance frame press, self-adapting and does not require pre-positioning of timber. Width and height adjustments are carried out automatically, without downtime, immediately after direct placement of workpieces into the pressing area. No repositioning of the timber is necessary. Base machine features heavy-duty, welded frame construction, made from oversized, thick-walled special profiles. Guide rails for pressing corners are precision-machined for minimum wear on the pressure beams. Continuous abutment for width pressing on the stop side, unbendable design, mounted on the base frame. Continuous abutment below, highly torsion-resistant design, connected to the base frame and machine interface. Infeed height: 500 mm. All abutments are precision adjustable for absolute angular accuracy and long-term precision. Right sliding carriage with fast, motorized width adjustment, ensuring parallel travel, including automatic hydraulic locking: Central drive for horizontal and vertical size adjustment, with high input and adjustment speed and automatic width and height adjustment (optoelectronic control). 2 vertical double-acting pressing cylinders, piston diameter 50 mm, 250 mm stroke, pressure force adjustable from 400 to 2,000 kg. 2 horizontal double-acting pressing cylinders, piston diameter 40 mm, 80 mm stroke, pressure force adjustable from 250 to 1,250 kg. Upper right pressing corners are heavy-duty, milled type, with automatic corner adjustment. Free-floating press corners Contact surfaces feature glue-repellent finish. Abutment and pressure plate depth: 100 mm. 8-way holding and positioning system for fully loose placement of all single timber parts in the pressing area (no prior stacking or plugging required). Each frame component is held and positioned at two points. Automatic lift-up function enables ergonomic placement of the upper cross member even with tall frames, at an operator-friendly height. Improved work safety through ground-level operation—no ladders or steps required. All individual frame timbers are placed directly into the pressing area. Program selection options: manual motorized via pushbutton, fully automatic via optoelectronic size adjustment, including automatic pressing cycle in tandem with a safety light barrier. Automatic, cycle-controlled pressing by impulse signal: vertical pressing – release – horizontal pressing – release – vertical/ horizontal pressing. Control cabinet conveniently mounted to the left on the base frame. Fast, optoelectronic size adjustment. Compact hydraulic system adjustable from 20 to 100 bar. Freely programmable, electric hand controller for efficient operation, particularly suitable for large and complex frame designs (

Kondisi: bekas, Working width: 3600 mm Working height: 2600 mm Number of pressing cylinders: 5 units Loading dimensions (L x W x H): 4400 x 1150 x 2970 mm Weight: 3000 kg Schafberger + Sprödhuber Frame Press Bavaria ----- Machine will be overhauled by us prior to delivery With automatic pressing cycle + manual control For corner joints with mortise and tenon CE version Base machine in heavy-duty welded frame construction, with thick-walled special hollow sections. Guide rails for the pressure beams at the press corners manufactured for low wear. Quick and smooth manual width adjustment via ball bearing carriage, locking in detent system. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, thus no vertical positioning of the horizontal pressing cylinders necessary, which avoids cylinder collisions. The lower abutments can be set at multiple positions Bsdow T Un Uspfx Ah Ueww to the most favorable insertion height in each case. 3 vertical pressing cylinders, double-acting, stroke adapted to working height, 2 horizontal pressing cylinders, double-acting Abutment and pressure plate depth: 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Required space/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing aids for angled windows (Technical data according to manufacturer's specifications – subject to change! Images may differ from original, prices net, plus VAT (domestic))

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm Bwsdovu Hghjpfx Ah Ujw > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. Bwedpovu Hfqofx Ah Usw > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...