Beli Thermoform bekas (176)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, jam operasional: 41.685 h, Technical Data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. forming depth/negative, mm: 100 Cycle rate/min - max.: 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Heat to be dissipated: with top heating approx.: 10,260 KJ/h with top and bottom heating approx.: 17,715 KJ/h Special features: Hollow-bottom fixture available Control cabinet: included Kjdpfxoq A Um Re Aa Nodg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jam operasional: 80.188 h, nomor mesin/kendaraan: 322, Maximum film width 700-800 mm Equipment / further details: - GREINER STACKING / Transfer unit R3 (Ref. no.: 95002.24) // Machine no.: 00020 // Year of construction: 1998 Top and bottom heating Material: PS and PP were processed Kdedjq Nn Hcjpfx Aa Nog 450 Ps // 350 Pp The following tools have run on the machine: 8-cavity tool Ø95 and 15-cavity tool Ø73 and 15-cavity tool Ø86 Primarily packaging for the dairy industry was produced. Cycle rates are between 18-25 cycles per minute – depending on cup weight.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 403, Equipment / Additional Information: Unwinding Device: Roll Holding: single Max. Roll Diameter: 1000 mm Unwinding: automatic Thermoforming Machine: Max. Tool Dimensions: 520 x 330 mm Max. Positive Forming Height: 15 mm Max. Negative Forming Height: 120 mm Film Width: 150 / 760 mm Stroke Length: 50 / 330 mm Max. HIPS Film Thickness: 1.8 mm Kdedpfx Aen D Ew Iea Nsg Lower Table Stroke: 150 mm Clamping Force: 7,500 kg Installed Power Upper Heater: 18.8 kW Installed Power Lower Heater: 14.1 kW Idle Cycle Rate: 40 cycles/min Main Drive Motor Power: 2.2 kW Film Feed Motor Power: 0.75 kW Operating Air Pressure: 7 kg/cm² Water Consumption at 12°C: approx. 30 l/h Air Consumption at 7 kg/cm²: approx. 125 l/cycle Total Installed Power: 50 kW 9x Tools: Article No. // Tool No. // Cavities // Description / Product: 3599 // 457 // 10 // Vending cup, Capacity = 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo cup, Capacity = 300 ml / 12 oz 509 // 452 // 6 // Ice cream cup, Capacity brimful = 140 ml / Capacity at 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo cup ⌀ 81 / 180 ml 740 // - // - // Standard cup with sealable rim ⌀ 75–120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo cup, Capacity = 80 ml 595 // 456 // 10 // Vending cup, Capacity = 150 ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granulate cup 180 ml / technical part with flat sealing rim

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Ein Großformat-Vakuum-Tiefziehmaschine Geiss steht zur Verfügung. Heizleistung: 180kW, Formfläche X/Y: 1600mm/1000mm, Ziehtiefe: 620mm, Schnellspannsystem: 640mm, Fensterplattenverstellung: 250mm-750mm, Bohrraster: 50mm, Schließkraft: 50kN. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Voraussichtlich ab Februar 2026 verfügbar. Kdedjxwyvkjpfx Aa Nsg

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), de-001 Kdodpjxaphbefx Aa Neg

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), A large-format vacuum thermoforming machine by Geiss is available. Sheet cut size min.: 1100mm/1300mm, max. sheet cut size: 2100mm/1800mm, max. forming depth: 620mm. Additional sheet format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional sheet format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Includes a separate loading unit with pneumatic sheet separation equipment, an automatic aligner for sheet cuts in both longitudinal and transverse directions, a pneumatic pusher for removing formed parts from the feeder unit, fully automatic central lubrication for the loading unit, several interchangeable pallets for window sheet sets, a storage rack for window sheets, as well as a vacuum control system with four independently adjustable flow stages and an air treatment system. Documentation is available. Inspection on site is possible. Kdsdpfowih Arox Aa Nsg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Data Teknis: Material: Film PP (setengah keras hingga lunak) Ketebalan material: 500 Mikron Diameter gulungan: maks. 780 mm Lebar jalur: 1050 mm Berat gulungan: sekitar 450 kg/jam Diameter inti gulungan: 152/143 mm (selongsong baja) Poros penyangga: kotak 40x40x1600 mm Panjang inti gulungan: 1300 mm Lebar roller pemandu: 1300 mm Kecepatan produksi: maks. 16,5 m/menit Kdsdpfx Aoya Ekyea Nog Tarikan jalur: maks. 250 N, penurunan gaya tarik 30% Jumlah posisi penggulungan: 2 Arah penggulungan: sisi atas di luar Jenis penggulungan: penggulungan aksial Tingkat proteksi GS drives: IP 23 Tingkat proteksi DS drives: IP 44 Tegangan/jenis arus: 220/380 V, 50 Hz Tekanan udara: 6 bar Sisi pengoperasian dan penggerak: kanan

Kondisi: bekas, Gebrauchte Abfülllinie von TANG OG WEISS AS (DK) zur Verpackung von Flüssigkeiten in Kunststoffflaschen. Geeignet für Füllvolumina von 50 ml bis 750 ml. Leistungsdaten der Linie: - Für Flaschen mit 750 ml Volumen: bis zu 600 Stück/h Kdodpfx Aex Tifioa Njg - Für Flaschen im Bereich von 200 bis 400 ml: ca. 800–900 Stück/h - Für kleinere Flaschen ist eine Kapazität von etwa 1.000–1.200 Stück/h realistisch. Die Linie setzt sich aus folgenden Komponenten zusammen: - Flaschenzuführbehälter von PACKFEEDER S.L. (Spanien), Modell MN 100-4 - Füll- und Verschließeinheit von TANG OG WEISS AS (DK), Modell TWKS. Beinhaltet das Füllmodul TWRF mit zwei Füllventilen, einen Puffertank aus Edelstahl (Gesamtvolumen 15 l), Rundlauftisch, Verschlusszuführung, Verschließarm und Plattenförderer - Edelstahl-Drehkolbenpumpe von SSP PUMPS (England), Modell L2-0017, zur Förderung des Produkts in den Puffertank - Etikettiermaschine von EME Etiketteringsmaskiner ApS (Dänemark), Modell 4-120 (4000 Serie), ohne Drucker, ausgestattet mit Plattenförderer und zwei Selbstklebe-Etikettierstationen (Vorder- und Rückseite der Gebinde). Etikettenzuführungshöhe: 20–120 mm, -breite: 10–250 mm, Arbeitsgeschwindigkeit: 0–40 m/min - Automatische Folieneinschweißmaschine von SKINETTA PAC-SYSTEME GMBH & CO. (Deutschland), Modell ASK 450. Die Maschine umwickelt 6er-Packs mit Schrumpffolie und verschweißt/thermoformt sie. Einlauföffnung zur Schrumpfsektion: Breite 440 mm, Höhe 320 mm (Baujahr 1994, ohne Dokumentation) - Plattenförderer und Steuerpulte Im Lieferumfang enthalten: Schrank mit Formatteilen für ovale Flaschen (Volumen 50, 200, 400, 750 ml), Herstellungsdokumentation in Dänisch und Bedienungsanleitung auf Polnisch. Baujahr der Linie: 2007.

Kondisi: diremaj di bengkel (bekas), Completely overhauled and newly painted. Kdedpfsfua H Asx Aa Njg

Kondisi: diremaj di bengkel (bekas), Small-format machine with a size of 350x250x90. For skin packaging and blistering of small production runs. Kdjdpfx Aasfugz Us Neg An ideal demonstration machine for any workshop. Optionally available with top punch. Further details upon request. Fully overhauled and newly painted.

Kondisi: diremaj di bengkel (bekas), TS 100 c cross-cut saw with conveyor belt, extraction belt, and extraction system; conveyor and saw band speeds are adjustable. Includes 4 hold-down devices, new running wheels, and new bearings. Machine has been completely overhauled and newly painted. Passage width: 600 mm. Further details available upon request. Ksdpfx Aaofua Drj Nsdg

Kondisi: diremaj di bengkel (bekas), Completely overhauled and newly painted Passage width 900 mm Kjdpfxjfuazts Aa Nodg Roller table

Kondisi: diremaj di bengkel (bekas), Top heating with pilot burner control Individual emitters for the top heating 2 cooling fans D05 Ksdpfxefua Huj Aa Nsdg Pre-blow and demolding automation Documentation and plans in German Max. forming area 1210 x 500 Longitudinal and cross cutters with 6 quick-change crush knives Euro hole punching unit (retrofit available at extra cost) Completely overhauled

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Data teknis: • Meja putar 4 stasiun • Maks. luas penyegelan 350 x 250 • Maks. kedalaman blister 70 – 100 mm tergantung jenis produk • Gaya penyegelan 12.800 N • Daya pemanas penyegel 1,75 kW • Penyuplai karton • Penyekat kemasan • Unit pembentuk karton • Kabel dengan steker CEE 16A • Berat sekitar 750 kg Kdsdsfua Dcjpfx Aa Nsg Mesin tersedia dalam semua varian b, b-2, b-3, b-4.

Kondisi: diremaj di bengkel (bekas), Skin packaging machine and blister packaging machine with longitudinal and cross cutter, euro hole punching. Completely overhauled and newly painted SB 74c-10 with strip steel die cutter and waste material rewinder. New conveyor belt. Kjdpefua S Sofx Aa Nsdg Format: 770 x 505 mm. Also available as c-9 model or with top punch upon request.

Kondisi: diremaj di bengkel (bekas), completely overhauled and newly painted Pass-through width 600 mm Kjdofua Axjpfx Aa Njdg Roller table

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 8 h, panjang total: 2.000 mm, lebar total: 3.000 mm, tinggi total: 3.000 mm, berat keseluruhan: 1.000 kg, jenis arus masuk: tiga fasa, daya: 2,5 kW (3,40 hp), tekanan: 3 batang, sambungan udara terkompresi: 3 batang, frekuensi input: 50 Hz, El complejo de hardware está diseñado para conformar porciones de carne picada por volumen: 8 porciones de 1 kg + hasta 100 g y alimentarlas en moldes fabricados en una termoformadora. Kdedpov R Ttasfx Aa Neg - Rendimiento de la unidad: a) hasta 8 ciclos/min para carne de cerdo picada; de aprox. 70/30 hasta 30 toneladas/turno b) promedio de 8–5,4 ciclos/min, dependiendo del contenido de grasa de vacuno en la carne picada, cerdo + vacuno 70/30, hasta 20-22 toneladas/turno - Consumo total de energía eléctrica: 2,5 kW Incluye: 1. Dosificador 2. Volteador, opción 2 posiciones, producto vacío Altura aprox. 700 mm y aprox. 1900 mm 3. Transportador de tornillo Multivac no incluido – MULTIVAC R515 Film inferior – 140 micras Film superior – 60 micras Tamaño del envase – 135 x 175 mm, tamaño del bloque 4x2 – 375 x 585 mm Dimensiones (Largo x Ancho x Alto): 2000,0 × 3000,0 × 2000,0 mm Esto facilitará el trabajo en la producción. Esto aumentará la capacidad de producción de carne picada.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, GEA UniSlicer, PowerPak, Check 4000 - Slicing, Packaging and Checkweighing Line Slicing, Packaging and Checkweighing Line Kdjdpfxox Tiqxj Aa Neg Consists of: 1. Slicer Manufacturer: GEA Food Solutions Model: GEA UniSlicer Serial number: 4044503098 Year of manufacture: 2017 Voltage: 3x400V+N+PE Rated current: 9.0 A High-performance slicer for cold cuts and cheeses, equipped with a touchscreen control panel and a precise cutting system. Designed for continuous operation with rapid format changeover to accommodate different product formats. 2. Checkweigher System Manufacturer: GEA Food Solutions Model: GEA Check 4000 Serial number: 4040921663 Year of manufacture: 2017 Automatic dynamic checkweigher integrated into the line. Responsible for precise weighing of each portion of slices and communication with the slicer to optimise target weights. 3. Thermoforming Packaging Machine (Thermoformer) Manufacturer: GEA Food Solutions Model: PowerPak Serial number: 40420120 Year of manufacture: 2017 Voltage: 3x400V+N+PE / 50Hz Rated current: 33 A Maximum power: 22 kW Industrial thermoformer for packaging products in rigid or flexible film. The machine automatically forms packages, allows for product loading and hermetically seals the finished packs.

Tahun pembuatan: 2026, Kondisi: baru, Are you looking for the BEST price/performance ratio? Contact us! Machines directly from the manufacturer! THE ORIGINAL MADE IN AUSTRIA! DUOFORMER – Heating – Forming – Pressing! The HEATING STATION for all thermoplastic materials up to 230°C and the VACUUM PRESS for daily requirements! • No cumbersome fixing of pressing layers • No slipping of the forming template • Effortless closing and opening • Pressing of M-shapes • Operation from all four sides DUOFORMER S VERTICAL – Produce without compromise! Vertical: Workpiece height up to 850 mm Clamshell: See further options on this platform! Press area (LxW): 2880x1280 mm Heating area (LxW): 2600x1250 mm Overall dimensions (LxWxH): 3400x1750x1500 mm • Heating drawer up to +230°C – 16 kW • 40 m³/h high-performance vacuum pump (BECKER) • 4 pneumatic cylinders • Reinforced grid frame • Two-hand safety operation • Travel signal Features: Vacuum table with silicone membrane and QUICK-CHANGE SYSTEM for membrane replacement • Fully welded, torsion-resistant, robust steel construction • Pressing force up to 9 t/m² (-900 mbar rel.) • Analog vacuum pressure gauge Kedpfxoiquxge Aa Nodg • Mechanical vacuum pressure regulator • Transparent silicone membrane up to 230°C, 780% elongation, 40 Shore-A • Stable, heat-resistant phenolic resin work surface, 16 mm, with integrated air extraction channels • Additional vacuum connection (e.g., for external vacuum bags, vacuum clamps) • Integrated forklift pockets • Incl. swivel castors Heating drawer with CAS heating system (Controlled Air Stream) • Insert thickness: 0 - 70 mm • Heating power: max. temperature +230°C • 2 circulating air fans • Extendable support surface with grid, 30 x 30 mm spacing • Heating drawer easily removable Operating unit with 4" SIEMENS touch panel • Swiveling control cabinet on right side • Continuously variable temperature control up to +230°C • Heating time regulation with timer and alarm • Complete with cable and plug • Electrical connection: 3~ 400 V, 50/60 Hz, 17.5 kW Duoformer Applications: ● Heating and thermoforming of SOLID SURFACES such as: CORIAN; HIMACS; KERROCK; HANEX; STARON; MISTRAL; AVONITE; TRISTONE; VELSTONE; WILSONART; GETACORE; RAUVISIO; VARICOR; PLEXICOR; MEGANITE; KRION; LIVINGSTONE; MARLAN; EOS; FORMICA; MYSTERA, etc. ● Heating and thermoforming of other thermoplastics such as: ABS, PMMA (Plexiglas, Perspex, Lucite), PET-G (Vivak), PE, PS, PP, PVC-U, PC (Makrolon), UPM-GRADA, RESYSTA, NFPP, etc. ● Vacuum press for laminating, coating, flat pressing, forming, veneering, edge and profile application, thermoforming, gluing, pressing Other sizes available on request! DUOFORMER Maxi Clamshell: Workpiece height approx. 650 mm Vertical: Workpiece height approx. 1000 mm Press area (LxW): 3380x1380 mm Heating area (LxW): 3000x1250 mm Heating drawer up to +230°C – 24 kW Vacuum pumps: 40 m³/h, 80 m³/h, 100 m³/h Overall dimensions (LxWxH): 3900x1600x1500 mm DUOFORMER Mega For the full length of solid surface sheets! Clamshell: Workpiece height approx. 650 mm Vertical: Workpiece height approx. 1000 mm Press area (LxW): 4150x1780 mm Heating area (LxW): 3850x1250 mm Heating drawer up to +230°C – 32 kW Vacuum pumps: 80 m³/h, 100 m³/h, 140 m³/h Overall dimensions (LxWxH): 4700x2050x1500 mm UNIVERSALFORMERS Direct – Honest – Competent

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, ws3750-24l Kdedpfx Aaowuqvrs Neg

Tahun pembuatan: 2026, Kondisi: baru, Vacuum membrane press VPR-3500 is a versatile press designed for woodworking and thermoforming applications. The VPR-3500 press is both tiltable and mobile. Possible applications: Veneering / form gluing / wrapping... Lamination of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Work surface equipped with vacuum channels ensures uniform negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity: 100 l Working area: 3500 x 1500 mm Motor power: 0.75 kW Vacuum pump capacity: 40 m³/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: ex stock 54634 Bitburg Kdsdpfx Aajd Ecc Ts Nog - loaded, free of charge -

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Vacuum membrane press VPR-3500 is a versatile press designed for woodworking and thermoforming applications. Kdodedvldaepfx Aa Nog The VPR-3500 press is both tiltable and mobile. Possible applications: Veneering / form gluing / wrapping... Lamination of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Work surface equipped with vacuum channels ensures uniform negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity: 100 l Working area: 3500 x 1500 mm Motor power: 0.75 kW Vacuum pump capacity: 40 m³/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: ex stock 54634 Bitburg - loaded, free of charge -

Tahun pembuatan: 2023, Kondisi: baru, In the field of 3D thermoforming, we also offer presses, turners, film storage paternosters, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top quality and suitable for every membrane press (for film and veneer pressing). You can purchase our membranes pre-cut to your required dimensions or as roll goods. SILICONE Type: MS-2 Color: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore/hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Color: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore/hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Color: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore/hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Color: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore/hardness: approx. 42° / 60° Shore Thickness: 3.5 – 4 mm Operating temperature: max. 130°C Standard SILICONE Type: RSS Color: red-brown or transparent (other colors on request) Surface: both sides smooth Standard length: cut to size or 10 m roll (other lengths on request) Standard width: 1200 mm – up to 1800 mm on request Polymer: silicone Shore/hardness: 30° – 80° Shore Thickness: 0.5 – 10 mm Ksdpfxed S Efaj Aa Nedg

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), HEK GmbH VGO 200 S warming cabinet Dimensions (approx.): Width: 1035 mm Depth: 800 mm + 210 mm pipe Ksdpfjg Hzqbsx Aa Njdg Height: 820 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, For sale: VIRO TNG-4 Vertical Block Moulding Machine Specifications: • Year of manufacture: 2016 • Block dimensions: - Height: 4100 mm - Depth: 1300 mm - Width: 1040 mm - Total volume: 5.5 m³ • Cycle times: - Density 12-16 g/l: 20-22 blocks/hour - Density 17-19 g/l: 18-20 blocks/hour - Density 20-23 g/l: 16-18 blocks/hour - Density 24-28 g/l: 14-15 blocks/hour - Density 29-35 g/l: 12-14 blocks/hour Kedpfx Aspwbmbja Nodg • Filling system: - Silo capacity: 10 m³ - High-pressure suction blower: 11 kW - Filling diameter: 300 mm - Drive: hydraulic • Mechanics: - Hydraulic system: 15 kW - Mold extraction: hydraulic - Door movement: hydraulic • Electrical equipment: - Servo amplifiers: Mitsubishi - Frequency converters: Mitsubishi - PLC: Siemens Simatic - HMI panels: Siemens Simatic - PC computer: Axiomtek The machine is built in compliance with European standards, the frame is stress-relieved, machined, and pressure-tested. It features a maintenance platform with access assistance and fall protection. In perfect condition. There is also the possibility to purchase a complete production line (including installation, commissioning, and staff training). TAG: block mould, block molding, block-mould, polystyrene, EPS