Beli Traub Tnd 200 bekas (92)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 47.600 h, nomor mesin/kendaraan: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Njdpfeh Dzqlsx Aglscl Driven tools at all positions X axis Z axis C axis Automatic tailstock Chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 22.232 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 317, panjang pembubutan: 1.000 mm, diameter pembubutan: 680 mm, daya motor spindle: 60.000 W, kecepatan spindel (maks.): 2.800 rpm, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Panjang pembubutan: 1.000 mm Diameter pembubutan: 680 mm Daya motor spindle: 60.000 W Putaran spindle maksimum: 2.800 rpm RINCIAN MESIN Model kontrol: TX 8H Data listrik Tegangan operasi: 400 V 3~ Tegangan kontrol: 24 V ~ Tegangan katup: 24 V – Tegangan kopling: 24 V – Daya total: 60 kW Arus total: 100 A Waktu operasi spindle: 22.232 jam PERLENGKAPAN Dokumentasi/manual Putaran dapat diatur secara kontinu Konveyor serbuk RUEZ SFWW2 Oil separator Pemegang alat VDI40 Dokumentasi lengkap Ncedjw Rp Svjpfx Agljl Catatan: Pembongkaran dan pemuatan dapat didukung dengan personel dan derek.

Tahun pembuatan: 1983, Kondisi: siap digunakan (bekas), Swing diameter: 320 mm, turning length: 1,000 mm, spindle bore: 80 mm, spindle speed: 3,150 rpm, travel X/Z: 265 mm / 1,000 mm. Machine dimensions X/Y/Z: approx. 5,500 mm / 2,400 mm / 2,400 mm, weight: approx. 7,000 kg, control system: Traub System TX-8. Includes a tool set, three-jaw chuck, and bar feeder with collets. Documentation available. Inspection on site is possible. Nsdowzld Depfx Aglocl

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub-spindle power: 18.5 kW / 11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. Inspection on site possible. Njdpfx Aev Scrhjglocl

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), A CNC twin-spindle lathe Traub, completely overhauled in 2025, is available. Turning length: 450mm, spindle bore: 65mm, max. speed: 4000rpm, main spindle/sub-spindle power: 18.5kW/11kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed travel: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed travel: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed travel: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12,938h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation available. An on-site inspection is possible. Ncjdpev Scrbefx Agljl

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and sub spindle, parts catcher, bar feeder Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. The machine geometry has been checked and adjusted/set. Machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Ncsdpfx Agowi I Eyjljl Spindle bearings, ball screws, linear guides, clamping cylinder. The warranty expressly only covers spare parts, not downtime or labor hours, travel time. Warranty does not apply to parts other than those listed above, e.g., wear parts, electrical, electronics, hydraulics, etc.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8H, year 2001 • 2x 10-position turrets with driven tool holders, VDI30 Ncsdpfswi Izhjx Aglsl • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 clamping system on main and sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts manual, circuit diagram, ATC optics Very good condition. Can be inspected under power. The machine geometry has been checked and adjusted/set.

Kondisi: bekas, CNC mesin otomatis bubut panjang TRAUB TNL 12/7 Ncjdpfx Ajxbtz Uoglel

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] Ncjdouhav Djpfx Agljl - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 Ncsdpfx Agsuhaw Uelel UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z-axis stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] OPPOSITE MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control unit: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 mm - Y travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm SUB MACHINING - Number of positions: 4 Ncsdpfxjuhaxfo Aglsl - Number of powered positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - Control system: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar loader: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet chucks for feed: F20 - Set of collet chucks for feed: F16 - Sleeve: 4 - Set of tubes and collets for bar feeder - Set of spare parts Njdeuhawzjpfx Agljcl

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 12.7 [mm] Nedpfsuhawuex Agljcl - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven toolholders: 2 - Number of fixed toolholders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeves: 4 - Set of trays and collets for bar loading magazine - Tool presetting device

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel Nedpfxjuhadzs Aglecl - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH

Kondisi: belum diuji (bekas), Tahun pembuatan: 1994, jam operasional: 8.000 h, Fungsionalitas: belum diuji, Machine in good condition Nodpfxjv Im Sde Aglecl

Kondisi: sangat baik (bekas), Traub TNL12 CNC Swiss Kapasitas 12 mm Jam produksi: 25.596 jam Sistem Pemadam Api Kraft & Bauer Filter kertas: Kompakt Band Filter Konfigurasi sesuai foto (foto tambahan menyusul) Mulai produksi tahun 2009 (model pameran asli) Bar feeder FMB 12 kaki Pengumpul kabut Konveyor serbuk Nsdpfxjw R E Adj Aglecl "2 mesin tersedia"

Kondisi: baik (bekas), Tahun pembuatan: 2007, Traub TNX 65/42 Fräs- und Drehzentrum Baujahr 2007 Seriennummer: 7060107 Ncedoq Npqmepfx Agljl Inbetriebnahme: 2010 TX 8i-S Steuerung (Mitsubishi/Traub-basierte Steuerung mit Mitsubishi-Antrieben und -Motoren) 15 CNC-Achsen Vier (4) X-Y-Z Revolver mit jeweils 10 Positionen (bis zu 20 Werkzeuge je Revolver möglich) 65 mm Spindeldurchlass an Haupt- und Gegenspindel (Gegenspindel mit Kühlmittelspülung) Fußpedalsteuerung zum Spannen/Lösen der Spannfutter Servogesteuerte Portaleinheit Hydraulisch schwenkbar mit pneumatischem Fertigteil- und Reststückgreifer Fertigteilförderband RESY Papierband-Kühlschmierstofffilter Knoll-Kühlmitteltank mit BKW Kältemittel-Temperaturregelung 20 bar Hochdruck- und 8 bar Niederdruck-Kühlmittelpumpen Knoll Späneförderer FMB Turbo 5-55 Stangenlademagazin (neu 2010) 2 Einzelstangen-Drehhalter 2 Doppelstangen-Drehhalter 1 Abstechhalter 1 angetriebener doppelter radialer ER Spannzangenhalter 1 angetriebener radialer ER Spannzangenhalter 4 radiale angetriebene ER Spannzangenhalter 1 radialer angetriebener Fräserhalter 1 winkelverstellbarer angetriebener ER Spannzangenhalter 2 radiale angetriebene Messerkopfhalter 2 axiale angetriebene Fräserhalter 6 axiale angetriebene ER Spannzangenhalter 43 zusätzliche Werkzeughalter auf separater Liste (siehe Anhang) Hainbuch Hauptspindel-Spannzangenfutter Röhm 2-Backen-Futter an der Gegenspindel 2 Ersatzsätze Kugelumlaufspindeln und Lagerpakete für die Z-Achse.

Kondisi: bekas, Tahun pembuatan: 1990, Banyak dudukan Chuck pengunci daya Njdpfx Ageyc Hgbslscl Revolver 12 posisi Jenis mesin: CNC - Mesin Bubut Tahun pembuatan: 1990 Kontrol: Traub TX 8 F Diameter putar: 480 mm Panjang putar: 800 mm Lubang spindle: 65 mm Kecepatan spindle: 40 - 4000 rpm Berat: sekitar 5000 kg Dimensi P x L x T: sekitar 2950 x 1990 x 2000 mm Kondisi: bekas

Kondisi: bekas, Tahun pembuatan: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm CNC control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3,150 rpm / 2-stage Rapid traverse: 10,000 mm/min Tool turret - number of stations: 8 Operating hours / on-time hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions approx. (LxWxH): 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: 200 mm diameter hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Njdpfx Ageu Rqabsljcl Coolant system Control panel Accessories: Fine adjustment device for tool setup

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Traub automatic lathe Ncjdpfx Aewcqv Iegljl

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 360mm/160mm, distance between centers: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Nedpowmqx Dofx Aglscl

Kondisi: bekas, Tahun pembuatan: 1993, Detail Teknis: Gerak x: 400 mm Gerak y: 300 mm Gerak z: 400 mm Nsdpeu Idn Hjfx Agljcl Kecepatan spindle: 8000 rpm Kontrol: Fanuc OM Meja penjepit: 500x300 mm Jumlah tempat magazin: 16 buah Taper alat: SK40 Jarak spindle kerja/permukaan penjepit maks.: 50-450 mm Jumlah palet: 2 buah/part Kebutuhan daya total: 10 kW Berat mesin sekitar: 2,5 t Dimensi mesin (PxLxT): 2,4x1,8x2,5 m Ukuran transportasi mesin: 2,45x1,8x2,5 m - Lemari listrik - Sistem pendingin - Konveyor serpihan merk META (Tinggi angkut 1500mm; Lebar 200mm) Fungsi pergantian meja tidak beroperasi.

Tahun pembuatan: 2001, Kondisi: baik (bekas), Rod diameter min. 18mm / max. 63mm Ncjdpfx Aji Dagcoglol Bar length min. 1000mm / max. 4200mm

Kondisi: sangat baik (bekas), Manufacturer: GRÜN SYSTEMTECHNIK WETZLAR including case We offer an original ATC measuring microscope, which was originally taken from a TRAUB TNA turning center. The device is designed for integration into the automatic tool changer and can be used on various CNC machines with a suitable tool holder interface (size comparable to TRAUB TNA400). Key Features and Benefits: • Universal Application: Suitable for any CNC machine with a compatible tool holder interface. • Fast Tool Setup: Enables direct measurement of cutting edges, tool lengths, and radii within the machine. • Process Reliability: Tool wear can be detected and corrected immediately without removing the tool. • Precise Referencing: Useful for checking reference points, bores, and fixtures directly during setup. • Time Savings: Eliminates the need for external presetting devices and reduces downtime. • Compact and Robust Design: Simple integration and operation within the tool change system. This ATC measuring microscope transforms your CNC machine into a precise measurement station, helping you achieve higher accuracy, shorter setup times, and improved process reliability. Ncsdpfxoycuhte Aglel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 24.993 h, Fungsionalitas: berfungsi sepenuhnya, I am offering the following machines for sale: TRUMARK 3010 (TMS 1000) – Laser Marking System – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Ultrasonic Cleaning System – 2015 Mollart Drillsprint – Deep Hole Drilling Machine – 1996 Traub TNL 26 – CNC Sliding Headstock Lathe – 2004 Traub TNL 26 – CNC Sliding Headstock Lathe – 2007 Traub TNL 26 – CNC Sliding Headstock Lathe – 2009 Traub TNL 18 – CNC Sliding Headstock Lathe – 2013 Traub TNL 18 – CNC Sliding Headstock Lathe – 2014 Star SV-20R – CNC Sliding Headstock Lathe – 2019 Traub TNL18-9P – CNC Sliding Headstock Lathe – 2015 Traub TNL18 – CNC Sliding Headstock Lathe – 2014 Traub TNL18-9 – CNC Sliding Headstock Lathe – 2013 OTEK CF 1x18 T – Vibratory Finishing System – 2011 Rösler FKS 04.1 E Sa-So – Vibratory Finishing System – 2020 Schleifbock DP07 – Grinding & Polishing Machine (for implants) – 1986 Rösler RWT 1000-I – Indexing Table Blasting Machine – 2012 Biegemaschine C 202 M – Bending Machine – 1990 Schmidt Hydro-pneumatic Press – 2021 TRAUB TNL 26 – CNC Swiss-Type Automatic Lathe General information Model: TNL 26 Year of manufacture: 2007 Control: TRAUB TX8i Condition: used, in production Operating hours (powered on): 33,905 h Kinematics & Structure Number of axes: 13 Number of spindles: 2 Number of turrets: 2 Front tool station: yes Subsequent machining: yes Main spindle Max. bar diameter: 26 mm Max. machining length: 225 mm Z travel: 250 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Sub spindle Max. bar diameter: 26 mm Z travel: 250 mm X travel: 370 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Tool systems Upper turret Stations: 12 Powered stations: 12 Travel: X: 50 mm Ncodpfx Agsycl Uwjlol Z: 100 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Lower turret Stations: 12 Powered stations: yes Travel: X/Z: 50 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Front tool station Stations: 5 Powered stations: 4 X/Z travel: 370 / 250 mm Driven tools: up to 6,000 rpm Counter-operation Stations: 5 Powered stations: 4 Travel: X: 73 mm Y: ±50 mm Driven tools: up to 6,000 rpm Cooling & peripherals Coolant tank: available High-pressure coolant system: 70 bar Chip conveyor: available Parts conveyor: available Parts removal & parts ejector: available Driven guide bushing: yes Bar feeder: available Electrical data Supply voltage: 400 V Total drive power: 33 kW Dimensions & Weight Floor space: 3,706 × 1,292 mm Machine height: 1,630 mm Machine weight: approx. 4,000 kg