Beli Traub Tns bekas (98)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5318, lubang spindel: 26 mm, kecepatan spindel (maks.): 4.750 rpm, TECHNICAL DETAILS Max round diameter: 26 mm Max square size: 18 mm Max hexagon size: 22 mm Isdpfxewtq Ure Aahstr Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 – 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length (L – R): 1,800 mm Width (F – B): 1,000 mm Height: 1,400 mm Weight: 800 kg Total power consumption: 3.2 kW Operating voltage: 380 V, 50 Hz

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Itjdpotrvzxjfx Aaher Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Iedpjvldx Aofx Aahjtr Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 37.000 h, Fungsionalitas: berfungsi sepenuhnya, TRAUB TNX65 with bar loader and accessories Year of manufacture: 2006 Operating hours: 37,000 h Control: TX8i Itodpswm Igfjfx Aaher - Both tool turrets have been refitted with new seals - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer’s tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see photos) - Breuer bar loader (1,200 mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 22.232 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 317, panjang pembubutan: 1.000 mm, diameter pembubutan: 680 mm, daya motor spindle: 60.000 W, kecepatan spindel (maks.): 2.800 rpm, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Panjang pembubutan: 1.000 mm Diameter pembubutan: 680 mm Daya motor spindle: 60.000 W Putaran spindle maksimum: 2.800 rpm RINCIAN MESIN Model kontrol: TX 8H Data listrik Tegangan operasi: 400 V 3~ Tegangan kontrol: 24 V ~ Tegangan katup: 24 V – Tegangan kopling: 24 V – Daya total: 60 kW Arus total: 100 A Waktu operasi spindle: 22.232 jam PERLENGKAPAN Dokumentasi/manual Putaran dapat diatur secara kontinu Iodpfx Aaow Rp Svshetr Konveyor serbuk RUEZ SFWW2 Oil separator Pemegang alat VDI40 Dokumentasi lengkap Catatan: Pembongkaran dan pemuatan dapat didukung dengan personel dan derek.

Tahun pembuatan: 1983, Kondisi: siap digunakan (bekas), Swing diameter: 320 mm, turning length: 1,000 mm, spindle bore: 80 mm, spindle speed: 3,150 rpm, travel X/Z: 265 mm / 1,000 mm. Machine dimensions X/Y/Z: approx. 5,500 mm / 2,400 mm / 2,400 mm, weight: approx. 7,000 kg, control system: Traub System TX-8. Includes a tool set, three-jaw chuck, and bar feeder with collets. Documentation available. Inspection on site is possible. Itedpfx Ajwzld Dsahor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25//16455, kecepatan rotasi (maks.): 2.800 rpm, kecepatan rotasi (min.): 1.400 rpm, panjang pembubutan: 65 mm, TECHNICAL DETAILS Turning length: 65 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1,400–2,800 rpm MACHINE DETAILS Total power requirement: 2.6 kW Iodpfx Aajwtq Ulohotr Machine weight: 0.7 t Space requirement: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 Itedpfx Aasuhadzehsr - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 60.764 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030637, Mesin dalam kondisi baik dan siap pakai, saat ini masih dapat dilihat dalam keadaan teraliri listrik. Pembongkaran dan pemindahan mesin menjadi tanggung jawab pembeli. Mesin ini memiliki 2 turret masing-masing dengan 12 posisi alat, semua posisi alat tersebut berpenggerak. Selain itu terdapat perangkat depan dengan 5 posisi alat, 4 di antaranya berpenggerak, serta perangkat belakang dengan 5 posisi alat, 4 juga berpenggerak. Chuck spindle utama adalah Hainbuch 32, sedangkan spindle berlawanan menggunakan Axfix dari Hainbuch. Berbagai dudukan dasar alat dapat disertakan. Itodpfx Asw N Rzioahjr

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Traub automatic lathe Ijdpfx Aaswcqv Ishjtr

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and sub spindle, parts catcher, bar feeder Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. The machine geometry has been checked and adjusted/set. Machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinder. Iedpfx Aowi I Eyeahotr The warranty expressly only covers spare parts, not downtime or labor hours, travel time. Warranty does not apply to parts other than those listed above, e.g., wear parts, electrical, electronics, hydraulics, etc.

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 360mm/160mm, distance between centers: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Itsdpfx Aswmqx Djahor

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 42 mm, panjang pembubutan: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Spindle bore: 42 mm Tool turret: 4 stations Itsdpswtq Ufjfx Aaher MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm

Kondisi: baik (bekas), Tahun pembuatan: 1989, 1 x automatic lathe Traub TD 16 Year of manufacture: 1989 with hydraulic single bar feeder LNS Hydrobar 3.16 -HS 4.4 Year of manufacture: 1989 Equipment: 6-position turret Itodpfxsvga A Te Aahjr Quick-change material clamping Sliding headstock device Centralized lubrication by Vogel Accessories: see photos The machine can be inspected under power.

Kondisi: belum diuji (bekas), Tahun pembuatan: 1994, jam operasional: 8.000 h, Fungsionalitas: belum diuji, Machine in good condition Itjdpfev Im Sdox Aahor

Kondisi: baik (bekas), Tahun pembuatan: 2007, Traub TNX 65/42 Fräs- und Drehzentrum Baujahr 2007 Seriennummer: 7060107 Inbetriebnahme: 2010 TX 8i-S Steuerung (Mitsubishi/Traub-basierte Steuerung mit Mitsubishi-Antrieben und -Motoren) 15 CNC-Achsen Vier (4) X-Y-Z Revolver mit jeweils 10 Positionen (bis zu 20 Werkzeuge je Revolver möglich) 65 mm Spindeldurchlass an Haupt- und Gegenspindel (Gegenspindel mit Kühlmittelspülung) Fußpedalsteuerung zum Spannen/Lösen der Spannfutter Servogesteuerte Portaleinheit Hydraulisch schwenkbar mit pneumatischem Fertigteil- und Reststückgreifer Fertigteilförderband RESY Papierband-Kühlschmierstofffilter Knoll-Kühlmitteltank mit BKW Kältemittel-Temperaturregelung 20 bar Hochdruck- und 8 bar Niederdruck-Kühlmittelpumpen Knoll Späneförderer FMB Turbo 5-55 Stangenlademagazin (neu 2010) 2 Einzelstangen-Drehhalter 2 Doppelstangen-Drehhalter 1 Abstechhalter 1 angetriebener doppelter radialer ER Spannzangenhalter 1 angetriebener radialer ER Spannzangenhalter 4 radiale angetriebene ER Spannzangenhalter 1 radialer angetriebener Fräserhalter 1 winkelverstellbarer angetriebener ER Spannzangenhalter 2 radiale angetriebene Messerkopfhalter 2 axiale angetriebene Fräserhalter Iodpeq Npqmefx Aahstr 6 axiale angetriebene ER Spannzangenhalter 43 zusätzliche Werkzeughalter auf separater Liste (siehe Anhang) Hainbuch Hauptspindel-Spannzangenfutter Röhm 2-Backen-Futter an der Gegenspindel 2 Ersatzsätze Kugelumlaufspindeln und Lagerpakete für die Z-Achse.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8H, year 2001 • 2x 10-position turrets with driven tool holders, VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 clamping system on main and sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts manual, circuit diagram, ATC optics Very good condition. Itsdjwi Izhjpfx Aahjr Can be inspected under power. The machine geometry has been checked and adjusted/set.

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub-spindle power: 18.5 kW / 11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. Inspection on site possible. Iodpfx Aaov Scrhjhstr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Multispindle & bar automatic lathe TRAUB TD 26 1991 * Power per spindle: 2.2 kW * Number of spindles: 4 * Spindle bore: 26 mm * Speeds: 1.18 – 4750 rpm * Total power: 3.2 kW * Length (L – R): 1800 mm * Width (F – B): 1000 mm * Height: 1400 mm * Weight: 800 kg * Tool changer holder: 6 tools Additional Information * Max round bar: 26 mm Itedpfx Aaewc Aqwohjr * Max square bar: 18 mm * Max hexagon bar: 22 mm * Bar loader available

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 51.400 h, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, Isdpfx Aaewxc Hkshotr new hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed holders Short bar loader Breuning Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Under power, can be inspected Delivery time approx. 2 weeks by arrangement

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), A CNC twin-spindle lathe Traub, completely overhauled in 2025, is available. Turning length: 450mm, spindle bore: 65mm, max. speed: 4000rpm, main spindle/sub-spindle power: 18.5kW/11kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed travel: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed travel: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed travel: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12,938h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation available. An on-site inspection is possible. Isdpfxov Scrbs Aahstr

Kondisi: sangat baik (bekas), Multispindle and bar automatic lathes TRAUB TK 42 * Spindle power: 5.5 – 9 kW * Max. workpiece length: 206 mm * Spindle bore: 42 mm * Length (L – R): 2500 mm * Width (F – B): 900 mm Itodpfx Aswc Aqdjahjr * Height: 1700 mm * Tool changer mount: 4 slides

Kondisi: baik (bekas), Tahun pembuatan: 2013, AUTOMATIC BAR LATHE TRAUB A 25 Year: 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight approx. 0.7 t Space requirements approx. 1200 x 700 x 1600 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1400-2800 rpm Itjdjwc Amxjpfx Aahsr Bar loader included!