Beli Widoberg bekas (66)

Kondisi: baru, - with lateral discharge opening Dusdped Nnuiofx Aaqot - Total volume: 240 l - Dimensions approx. 1350 x 950 x 925 mm (h) - Working container dimensions approx. 1235 x 480 x 460 mm (h) - Drive: 1.5 kW - 380 V / 50 Hz - Max. speed: 1,500 rpm - PU-coated bottom approx. 15 mm - PU-coated side wall approx. 12 mm - Total weight approx. 400 kg - incl. dosing pump - incl. control unit with speed regulation, 1,000 – 1,500 rpm - optionally with pneumatic noise protection cover - optionally with partition walls

Kondisi: baik (bekas), Vorsatz polishing machine HAU HR 4 for rotational parts up to max. 200 mm diameter, equipped with 2 processing units. Units fitted with overhauled spray guns for liquid polishing compound. Maximum wheel diameter: 400 mm; maximum wheel width: 120 mm; shaft diameter: 35 mm. Machine similar to illustration. Duodpfx Ajzmbhsaqet

Kondisi: baru, Tahun pembuatan: 2012, linishing unit Djdpfxebdnuaj Aaqeut

Kondisi: baru, Vibratory finishing system with separation section - Total capacity approx. 420 l - Trough diameter approx. 1355 mm - Max. part size: 240 mm - PU lining, base: 15 mm - PU lining, side wall: 15 mm - Drive motor: 1.1 kW - Max. speed: 1500 rpm - Overall height: approx. 1100 mm - Total weight: 780 kg - Including dosing pump - Including control cabinet with variable speed control, 1000 - 1500 rpm Djdod Nnr Dspfx Aaqjut

Kondisi: baru, - with lateral discharge opening - Total capacity 380 l Duedjd Nnupepfx Aaqet - Dimensions approx. 1350 x 930 x 950 mm (H) - Working container dimensions approx. 1250 x 520 x 520 mm (H) - Drive 1.5 kW – 380 V / 50 Hz - Max. speed 1500 rpm - PU-coated base approx. 16 mm - PU-coated side wall approx. 12 mm - Total weight approx. 750 kg - incl. dosing pump - incl. control unit with variable speed, 1000 – 1500 rpm - optionally with pneumatic soundproof cover - optionally with partition walls

Kondisi: baru, - with side discharge opening - Total capacity 53 l - Working capacity approx. 40 l - Dimensions approx. 790 x 415 x 670 mm (H) Djdpfxed I Dn Nj Aaqjut - Working tank dimensions approx. 590 x 290 x 290 mm (H) - Drive 0.55 kW - Max. speed 1500 rpm - PU-coated base approx. 10 mm - PU-coated side walls approx. 8 mm - Total weight approx. 80 kg - incl. dosing pump - incl. control unit with speed regulation, 1000 – 1500 rpm

Kondisi: baru, ESP Spray Cleaning Machines The ESP series is designed for efficient cleaning of industrial parts using hot pressurized water and biodegradable cleaning agents. These machines offer very low operating costs and minimal consumption. The machine frame and body are made of high-quality, corrosion-resistant stainless steel. These machines are the right choice for removing oil, grease, and manufacturing residues from part surfaces, as well as for corrosion protection applications. ESP machines feature stainless steel pumps, spray nozzles, heating elements, and a construction with a motorized basket as standard. On request, these machines can also be equipped with a drying blower. Spray cleaning system for small to medium batch sizes, suitable for workshops, maintenance, or intermediate cleaning processes. Cleaning is performed with hot water in a spray chamber designed as a top-loader. Dedpfet Rrkjx Aaqout Depending on the model: basket diameter 820–1250 mm, payload 80–300 kg, spray pressure 1.8–3.5 bar, heating 4.5–12 kW. Optional features include: thermostat 0–90°C, timer, oil skimmer, filtration, loading and unloading trolleys.

Kondisi: baru, SprayClean spray cleaning machines SprayClean systems are front-loading machines equipped with a pneumatically operated front door. Everest SprayClean machines are designed for efficient cleaning of industrial components using hot high-pressure water and biodegradable cleaning agents. The SprayClean models feature full thermal insulation of the fluid tanks, steam extraction, pneumatically controlled front doors, and a motorized basket system as standard. Rinsing and drying processes can be integrated into these models upon customer request. Multi-stage systems are controlled via a PLC system. Optional accessories include oil skimmers, oil separator units, filter units, dosing pumps, loading trolleys, and cabin housing insulation, among others. Rotary washing system as a front-loader: Cleaning by high-pressure spraying with hot water. Machines are available in various sizes: basket diameters from 900 to 1800 mm, load capacities from 300 to 800 kg, and loading heights from 500 to 900 mm. Depending on the model, the system can perform washing, washing with rinsing, or washing, rinsing, and drying—all within a single unit. Custom requirements are gladly taken into account. Dedpfxjd Hbp Ee Aaqout We will be pleased to send you a detailed quotation.

Kondisi: baru,

Kondisi: baru, SprayClean spray cleaning machines SprayClean systems are front-loading machines equipped with a pneumatically operated front door. Everest SprayClean machines are designed for efficient cleaning of industrial components using hot high-pressure water and biodegradable cleaning agents. The SprayClean models feature full thermal insulation of the fluid tanks, steam extraction, pneumatically controlled front doors, and a motorized basket system as standard. Rinsing and drying processes can be integrated into these models upon customer request. Multi-stage systems are controlled via a PLC system. Optional accessories include oil skimmers, oil separator units, filter units, dosing pumps, loading trolleys, and cabin housing insulation, among others. Rotary washing system as a front-loader: Cleaning by high-pressure spraying with hot water. Machines are available in various sizes: basket diameters from 900 to 1800 mm, load capacities from 300 to 800 kg, and loading heights from 500 to 900 mm. Depending on the model, the system can perform washing, washing with rinsing, or washing, rinsing, and drying—all within a single unit. Custom requirements are gladly taken into account. Djdpfxs T D R Ds Aaqsut We will be pleased to send you a detailed quotation.

Kondisi: baru, The FC120 ZK grinding machine has been designed to ensure user-friendly operation for grinding/polishing square tubes and flat profiles. This machine processes workpieces up to 120 mm in width using three possible grinding belt and brush head combinations. The FC120 ZK combines a grinding belt head (Z) with a brush head (K). Grinding Belt Head: Post-processing of surfaces when grinding square tubes and flat profile elements – removes coarse defects and burrs. Brush Head: Final finishing after grinding – provides the surface with a smooth and uniform ground finish. Djdpfjd Ix I Ajx Aaqjut The FC120 ZK guarantees consistently high-quality workmanship of stainless steel square tubes and flat profiles – tube by tube. Grinding Belt Change: Tool-free belt change within seconds. NS Máquinas can supply various conveyor belt solutions to enable grinding of even smaller parts. Technical Details – FC120 ZK Working capacity (Ø mm): 120x120 Number of belt stations (Z): 1-2 Number of brush stations (K): 0-1 Grinding belt dimensions (mm): 120x1850 Brush belt dimensions (mm): 120xØ200 Grinding belt speed (m/s): 20 Brush belt speed (m/s): 15 Feed speed (m/s): 12 Grinding belt motor per head (kW): 3 Brush motor per head (kW): 2.2 Feed motor (kW): 0.25 Total power (kW): 5.5 (ZK) Power consumption (A): 12 (ZK) Dust extraction connection per head (Ø mm): 80 Dimensions (mm): 1450x800x1800 (ZK) Weight (kg): 500 (ZK)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, daya: 4,4 kW (5,98 hp), Löser KS100 BA mesin gerinda sabuk kontak, tanpa senter untuk pipa dan batang, bekas, dengan ketegangan sabuk pneumatik, tahun pembuatan 1999, kondisi sangat baik Dusdeqk Uyaepfx Aaqet

Kondisi: baru, Tahun pembuatan: 2025, DM1100 Z - NEW DESIGN - for €29,800 Deburring up to 1100 mm width. The DM1100 Z refines and deburrs light metal sheets cut by laser, punching, or shearing. This machine is equipped with a single wide belt station, which can be used for deburring parts from 50×50 mm in size up to a width of 1100 mm. The DM1100 Z is also suitable for surface finishing, and can be operated both with standard abrasive belts and with non-woven/Scotch-Brite belts. With an additional table, the new DM1100 Z can be combined with an existing DM1100 C edge rounding machine. Dsdpfxjimdmto Aaqeut We also offer a part return system for this machine.

Kondisi: diremajakan ulang (bekas), 1 overhauled table polishing machine / table polishing automatic, make HAU, model T1500 (max. part processing length 1500 mm), with 1 polishing station model PES/3 and a control cabinet. The table was dismantled, checked for damage (defective parts were replaced), cleaned, and repainted. The guide shafts were newly mounted and a new gearbox installed. + 1 polishing station, model PES/3, 11 kW (pneumatic lift, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely dismantled, checked for damage (defective parts were replaced), cleaned, and repainted. The polishing shaft was completely newly mounted, including the running bushing bearing. Dodew Au A Eepfx Aaqsut The oscillation device was also newly sealed throughout. New motor, belt pulleys, and drive belts installed. + 1 new control cabinet for operating the above-described equipment. Table speed and polishing wheel speed adjustable via frequency inverter.

Kondisi: diremajakan ulang (bekas), 1 overhauled table polishing machine / automatic table polishing machine, make HAU, model T1000 (max. workpiece length 1000 mm), equipped with 1 polishing station model PES/3 and an electrical control cabinet. The machine table was disassembled, checked for defects (damaged parts were replaced), cleaned and newly painted. The guide shafts were fitted with new bearings and a new gearbox was installed. + 1 polishing station, model PES/3, 11 kW (pneumatic lift, 100 mm oscillation AND motorized height adjustment). Maximum wheel width 400 mm, maximum wheel diameter 400 mm. The station was completely disassembled, checked for defects (damaged parts were replaced), cleaned, and newly painted. The polishing shaft was fitted with all new bearings, including the sleeve bearing. The oscillation mechanism was also newly sealed throughout. A new motor, pulleys, and drive belts were installed. + 1 new control cabinet for operating the aforementioned system. Table speed and polishing wheel speed are adjustable via frequency converter. Dedpsw Avptefx Aaqjut

Kondisi: baik (bekas), Roller conveyor, frame and substructure made of stainless steel, conveying height 1170 mm, roller width 400 mm, conveyor length 3000 mm Duodpfxjuhd Sco Aaqst - used, very good condition, immediately available