Beli Widoberg bekas (49)

Kondisi: baru, Long Belt Grinding Machine LMD2500 incl. Deburring Tool – NEW – Delivery Time on Request The LMD 2500 is a long belt grinder equipped with a flexible sanding belt, enabling the processing of both flat surfaces as well as edges and corners. This machine is ideal for machining irregular shapes, removing weld seams, and for deburring and rounding off laser-cut parts. The flexible and motorized height-adjustable table is perfect when, due to large dimensions, the workpiece to be machined cannot be easily moved. With the LMD2500, you benefit from the adaptability of the long belt in combination with various grinding tools such as a sanding shoe, manual pad, and deburring brush or disc, allowing you to process the required areas precisely. - Grinding of flat surfaces with the contact roller - Grain-linear finishing with flat pad - Grinding of weld seams - Deburring of laser-cut parts - Processing of large surfaces - Interchangeable finishing tools - Flexible deburring/edge-rounding station - Pneumatic belt tensioning - Tool carrier with counterweight system - Contact roller tool - Flat tool - Manual pad 100*80mm - Grinding belt with variable speed (8-25m/s) - Edge-rounding tool - Included: o Deburring disc holder Ø150mm, medium SH hardness o Sanding disc Ø150mm, G120 ceramic with hook-and-loop backing, x5 o Surface finishing disc Ø150mm with hook-and-loop backing o Edge-rounding brush Ø150mm, fine aluminum oxide o High-adhesion rubber mat (1000x600mm) for small parts Rcsdpfog I Ipkex Adcsh o Brush speed 600-1700 rpm o Abrasive belt 7800x120 mm

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, BULA MP133 Continuous Circular Polishing Machine for polishing, brushing, grinding, and deburring a wide variety of workpieces. - 8 workpiece holders mounted on a 600 mm pitch circle. - 3 processing stations, each with a drive power starting at 4 kW, equipped with the Bula Quick Lock system for polishing discs. - Polishing shaft diameter: 30 mm for BULA QuickLock - Maximum disc width: 150 mm - Maximum disc diameter: 350 mm - Footprint: approximately 1900 mm width, 2400 mm depth, 1700 mm height. The machine has been completely overhauled, cleaned, sandblasted, primed, and newly painted. The BULA MP133 was fitted with new motors, a new gearbox, and a new control cabinet. All drives are infinitely adjustable via frequency converters. Additional replacements include: bearings, belts, screws, covers, and more. The machine is available immediately. Rjdpfx Aowvq Ahedcsch Further technical details and pricing upon request. Subject to prior sale. Optionally, the system can also be supplied with a liquid polishing compound system, consisting of 3 WIDOBERG HDP-2 high-pressure dosing guns, brackets, timer, etc., and a pressure tank. The picture is for illustrative purposes only! WE CAN ALSO OFFER REPAIR OR REFURBISHMENT OF YOUR EXISTING MACHINE, OR A BULA MACHINE YOU PROCURE THROUGH ANOTHER CHANNEL.

Kondisi: baik (bekas), Internal grinding machine for pots/hollowware up to Ø 400 mm x 600 mm Hydraulically movable grinding heads, alternating operation Rjdpfx Aobdfr Tsdcech Complete with vacuum base plate and vacuum pump including hydraulic power unit and control cabinet

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Redpfx Adod Ev Upjcjch Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: diremaj di bengkel (bekas), Rotary Table Polishing Machine by Bula, Model MP81 for sale. Continuously rotating automatic machine for polishing, brushing, grinding, and deburring a wide variety of workpieces. 6 workpiece holders mounted on a 250 mm pitch circle. Rcodelccvmepfx Adcjh 1 processing station, drive power 2.2 kW, equipped with Bula Quick Lock System for polishing discs. Polishing spindle diameter: 25 mm The machine has been completely overhauled: machine body sandblasted, primed, newly painted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, entirely new control cabinet, and all drives are controlled via frequency converters. Subject to prior sale. Optionally, the system can be supplied with a polishing compound system (liquid), comprising 1 high-pressure metering gun WIDOBERG HDP-2, bracket, timer, etc., and pressure tank. WE CAN ALSO OFFER YOU THE REPAIR OR OVERHAUL OF YOUR EXISTING MACHINE OR OF A BULA MACHINE ACQUIRED THROUGH ANOTHER CHANNEL.

Kondisi: baru, Vibratory finishing system with separation section - Total capacity approx. 220 l - Tub diameter approx. 1,150 mm - Max. workpiece size: 180 mm - PU lining, base: 15 mm - PU lining, side wall: 13 mm - Drive: 1.1 kW - Max. speed: 1,500 rpm - Overall height: approx. 1,100 mm Rodped I Dmwefx Adcoch - Total weight: 460 kg - Incl. dosing pump - Incl. control cabinet with variable speed control, 1,000 - 1,500 rpm

Kondisi: baru, Vibratory Finishing System with Separation Section - Total volume approx. 120 l - Trough diameter approx. 852 mm - Max. workpiece size 160 mm - PU lining, base 15 mm - PU lining, side wall 12 mm - Drive 1.1 kW Rodpsd I A Atofx Adcech - Max. speed 1500 rpm - Overall height approx. 850 mm - Total weight 225 kg - incl. dosing pump - incl. control cabinet with variable speed control, 1000 - 1500 rpm

Kondisi: baru, The ML100 tube grinding machine is the ideal choice for surface grinding and polishing of round, oval, and elliptical tubes – suitable for both straight and curved tubes. The planetary belt system of the ML100 allows for belt grinding without the need for tube rotation, ensuring optimal results. The feed system safely guides straight tubes into the grinding station to ensure consistent and productive surface quality. Minimal vibration with long tubes: Thanks to the ML planetary belt system, the tube does not rotate. The abrasive belts revolve around the tube as it is transported in a straight line. Polishing of straight or curved tubes: The ML100 is designed for finishing straight tubes (automatic feed) as well as curved tubes (manual feed). Quick adjustment: The automatic feed can be easily detached via hinges to enable the processing of bent tubes. Reduced heat generation: Unlike conventional systems, the planetary belt system significantly reduces friction heat on the tube surface. Oval tubes: Surfaces of oval or elliptical tubes can be safely processed with the ML100. Maximum adaptability of the abrasive belt to holes or gaps in the tube. Redpfxsd Hfnbe Adcech Technical Data – ML100: Working capacity (Ø mm) 10 - 114 Number of stations 1 Abrasive belt dimensions (mm) (2x) 50 x 940 Belt speed (m/s) 3 - 22 Feed speed (m/min) 1 - 5 Abrasive belts motor (kW) 3 Drive wheel motor (kW) 1.5 Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction port (Ø mm) 80 Dimensions (mm) 750 x 1000 x 1300 Weight (kg) 250

Kondisi: baru, NEW MACHINE Rcodpfsci Tkuox Adcoh - Double-sided belt sanding or polishing machine, various configurations possible - Sanding / Sanding - Sanding / Polishing - Polishing / Polishing Motor: 4 kW, polishing wheel max. 120 x 500 mm, max. contact wheel diameter 400 mm, sanding belt 50 x 3500 mm

Kondisi: baru, NEW MACHINE - Double-sided belt grinder and polishing stand; various configurations available for seated or standing operation - Grinding / Grinding - Grinding / Polishing - Polishing / Polishing Rcsdpfx Adeci Tliocoh Motor: 4, 5.5, or 7.5 kW; polishing disc max. 120 x 500 mm; max. diameter of contact wheel 400 mm; abrasive belt 50 x 3500 mm - 3 selectable speeds: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm

Kondisi: baru, - with lateral discharge opening - with pneumatic soundproof lid - total volume 53 l - working volume approx. 40 l - dimensions approx. 790 x 415 x 670 mm (h) Rcodpfed I Dpisx Adcoh - working container dimensions approx. 590 x 290 x 290 mm (h) - drive 0.55 kW - max. speed 1500 rpm - PU-coated bottom approx. 10 mm - PU-coated side wall approx. 8 mm - total weight approx. 80 kg - incl. dosing pump - incl. control unit with variable speed, 1000 – 1500 rpm

Kondisi: baru, - without lateral discharge opening - Total capacity 53 l Rodpfod I Dnyjx Adcsch - Working capacity approx. 40 l - Dimensions approx. 790 x 415 x 670 mm (H) - Working container dimensions approx. 590 x 290 x 290 mm (H) - Drive 0.55 kW - Max. speed 1,500 rpm - PU-coated bottom approx. 10 mm - PU-coated side wall approx. 8 mm - Total weight approx. 80 kg - incl. dosing pump - incl. control system with variable speed control, 1,000 – 1,500 rpm

Kondisi: baru, - with lateral discharge opening - Total volume 130 l - Dimensions approx. 1280 x 890 x 920 mm (H) - Working container dimensions approx. 1000 x 380 x 410 mm (H) - Drive 1.1 kW - 380 V / 50 Hz - Speed max. 1500 rpm - PU-coated base approx. 15 mm - PU-coated side wall approx. 10 mm - Total weight approx. 300 kg Redpfx Aed I Dqgedcsch - incl. dosing pump - incl. control unit with variable speed control, 1000 – 1500 rpm - optionally with pneumatic soundproof cover - optionally with separation walls

Kondisi: baru, - with side discharge opening - Total capacity 53 l - Working capacity approx. 40 l - Dimensions approx. 790 x 415 x 670 mm (H) - Working tank dimensions approx. 590 x 290 x 290 mm (H) - Drive 0.55 kW - Max. speed 1500 rpm - PU-coated base approx. 10 mm - PU-coated side walls approx. 8 mm - Total weight approx. 80 kg - incl. dosing pump Rjdpfed I Dn Nox Adcsch - incl. control unit with speed regulation, 1000 – 1500 rpm

Kondisi: baru, - with lateral discharge opening - Total volume: 240 l Rsded Nnuijpfx Adcoch - Dimensions approx. 1350 x 950 x 925 mm (h) - Working container dimensions approx. 1235 x 480 x 460 mm (h) - Drive: 1.5 kW - 380 V / 50 Hz - Max. speed: 1,500 rpm - PU-coated bottom approx. 15 mm - PU-coated side wall approx. 12 mm - Total weight approx. 400 kg - incl. dosing pump - incl. control unit with speed regulation, 1,000 – 1,500 rpm - optionally with pneumatic noise protection cover - optionally with partition walls

Kondisi: baru, NEW MACHINE - Wet suction available in steel or stainless steel Rcjdeci Tlrspfx Adcjh - Extraction capacity: 1,650, 3,750, or 7,000 m³/h - Motor: 3, 5.5, or 15 kW

Kondisi: baru, The FG170 grinding and polishing machine for square tubes and flat profiles is distinguished by its robust construction, designed for intensive working conditions. These machines process workpieces up to 170 mm wide by allowing the combination of multiple abrasive belt heads with brush units. The FG170 Z is equipped with one abrasive belt head (Z). The FG170 ZK combines an abrasive belt head (Z) with a brush unit (K). Possible configurations include: Rodpfx Aded Ix Ntecsch FG170 2Z = 2 abrasive belt heads, or FG170 2ZK = 2 abrasive belt heads + 1 brush head. Other combinations are available upon customer request. Abrasive belt head: Performs surface reworking during the grinding process of square tubes and flat profiles—removes coarse imperfections and burrs. Brush head: Performs finishing after grinding—gives the surface a smooth and uniform finish. The FG170 ensures high-quality and consistent results when processing stainless steel square tubes and flat profiles—tube by tube. Abrasive belt change: Abrasive belts can be changed within seconds without tools. Fixed working height: FG machines have a fixed working height. Adjustment for different material thicknesses is achieved via the vertical feed of the processing stations, without the need to adjust the feed roller table. Technical details – FG170: Working capacity (Ø mm) 170x200 No. of belt stations (Z) 1–3 No. of brush stations (K) 0–2 Abrasive belt dimensions (mm) 170x2000 Brush belt dimensions (mm) 170xØ200 Abrasive belt speed (m/s) 20 Brush belt speed (m/s) 15 Feed speed (m/min) 6+12 Abrasive belt motor per head (kW) 4 Brush motor per head (kW) 3 Feed motor (kW) 0.45 Total power (kW) 8.5 (ZK) Power consumption (A) 18 (ZK) Dust extraction port per head (Ø mm) 80 Dimensions (mm) 1500x1000x1900 (ZK) Weight (kg) 740 (ZK)

Kondisi: baru, The ML75 tube grinding machine is the ideal choice for polishing round, oval, and elliptical tubes up to Ø76mm. The planetary belt system of the ML75 features a compact design, enabling the reworking of curved tubes. The machine can be equipped with an automatic feeding system for straight tubes. This new grinding machine is the solution for processing bent tubes with radii that are too tight for the ML100, or diameters too large for the ML50. Polishing of bent tubes with small radii: The planetary belt system of the ML75 offers a compact design for maximum flexibility in reworking tubes with small radii. Unlike other conventional systems, the planetary belt system reduces friction heat at the surface of the tube. Straight tubes: The ML75 is designed for the processing of curved tubes. With a feeding system, the ML75 can be quickly converted for polishing straight tubes. Technical Specifications – ML75: Working capacity (Ø mm): 10–76.2 Number of stations: 1 Abrasive belt, dimensions (mm): (2x) 25x860 Abrasive belt speed (m/s): 3–22 Feed speed (m/s): 1–5 Abrasive belt motor (kW): 2.2 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Rodpfx Adsd Hfg Ejcech Total power (kW): 3.94 Power consumption (A): 10 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 230

Kondisi: baru, DM100 ZC - performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore) with an abrasive belt and removes heavy burrs in the initial step. The second station is equipped with 2 counter-rotating cross belts with abrasive blocks and rounds the edges of the entire product, both inside and outside, in a second step. A major advantage is deburring products with surface protection foil, as only the edges are processed without damaging the foil. Technical Data – DM1100 ZC: Rjdpfx Adjd Hintococh Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross-belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Current consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Kondisi: baru, Vibratory finishing machine without separation section - Total capacity approx. 15 l - Internal diameter of round tub approx. 410 mm - Max. part size 90 mm - PU lining, base 10 mm - PU lining, side wall 8 mm - Drive 0.17 kW - Max. speed 1500 rpm - Overall height 620 mm Rcedped Ai Enofx Adcoh - Total weight 42 kg - Incl. dosing pump - Incl. control cabinet with speed regulation, 1000 - 1500 rpm

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. Rcedpfod Ixadex Adceh The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: baru, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD pipe deburring machines remove burrs from pipes after cutting. This machine simultaneously removes internal and external burrs from pipes and profiles without requiring rotation of the pipe material. Round, square, rectangular, and various other pipe and profile shapes can be deburred within just a few seconds. Rsdpfsd Ixbzsx Adcoch Thanks to the rotation of the brush, the operator does not need to rotate the pipe. The pipe clamping system allows for precise insertion of the pipes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Kondisi: baru, DM1100 C Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts The DM1100 C performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching. Rcjdod Evcwjpfx Adcoh The DM1100 C is equipped with double, counter-rotating transverse belts with abrasive blocks, effectively rounding the edges of the entire workpiece. A major advantage of this machine is the deburring of products with protective surface film without damaging the film – only the edges are processed. Excellent processing of parts with a wide range of dimensions, even for small parts starting from 50 x 50 mm up to 1100 mm. Technical Data – DM1100 C: Working capacity (Ø mm): 1100x50 Number of transverse belt stations: 2 Transverse belt speed (m/s): 8 Feed speed (m/s): 0.6-3.2 Transverse belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Power consumption (A): 13 Dust extraction connection per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Kondisi: baik (bekas), 1 Rcsdpfxsv Na Se Adcoh