Beli Mesin pengepres bal bekas (181)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jam operasional: 44.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 2.000 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, kapasitas tangki oli: 3.100 l, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2025, Technical Data Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours, as of December 2025 Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Feed volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic diagrams Comments: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantled press ram, disassembled into individual parts, overhauled the mechanics • Replaced the front two main running rollers Hjdpox Dnb Uefx Aansfg • Replaced the knives on the press ram • Main hydraulic cylinder dismantled and disassembled, checked cylinder tube and piston rod, replaced complete set of seals • Counter-blade in the frame replaced • Knife clearance adjusted to approx. 3 mm • Upper steel guide rails on the left and right in the frame replaced • Removed worn press floor, replaced base plate with wear-resistant HARDOX steel • Dismantled tying and twisting unit, disassembled, overhauled the mechanics, replaced all twisting shafts and ball bearings • Replaced all wire spools in the needle heads • Cleaned and readjusted wire cutters, lubricated and tensioned chains • All wire guide rollers refurbished • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic modes; see our video of the machine function test. Complete documentation is included (operating manual, CE declaration, electrical/hydraulic diagrams). Inspection is possible by appointment. We accept no liability for the technical data or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat keseluruhan: 40.000 kg, kapasitas tangki oli: 3.000 l, tahun perombakan terakhir: 2024, For sale is a used bale press system consisting of a chain belt conveyor designed for below-floor operation, equipped with a feed hopper, a hydraulic pre-compressor with agitating device, a MACPRESSE 111A baler, two complete wire feed frames each with five wire reel stands (without wire). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressure: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Binding: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, material dependent Hydraulic oil tank volume: 3,000 L Transport dimensions (baler with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and tested upon completion, see our functional video for reference. The system was previously used for baling paper and cardboard from municipal collections. After the contract period ended, the press line became available for sale. Details of overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment is possible. We assume no liability for technical details or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feeder belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above ground: 5,777 mm Side wall height feeder: 500 mm Side wall height incline: 880 mm Steel carrier height: 40 mm Carrier spacing: 1,200 mm Transport dimensions (dismantled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: Hfjdpfx Aaou Th D Rjnog The chain belt conveyor (year 2017) was custom-built and installed to match the press during the last installation in the Netherlands. The conveyor is in good working condition and was not overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 chain belt conveyor by Wagensveld B.V. 1 feed hopper with pre-compression flaps 1 agitating device 1 MACPRESSE baler, type 111A 2 wire feed frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic diagrams

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. Hjdpevf E Avsfx Aanofg - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, jam operasional: 32.169 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.320 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 22.000 kg, kapasitas tangki oli: 900 l, For sale is a complete baling plant consisting of conveying equipment, baler (partially overhauled and tested), and wire stations. Technical data for the baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main ram force: 60 t Pre-pressing force max.: 25 t Hfodsviwdmepfx Aanjg Feed hopper dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates: With bulk density of 30 kg/m³: approx. 5.5 t/h With bulk density of 50 kg/m³: approx. 10 t/h With bulk density of 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg (depending on material) PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with wirbulator 1 maintenance platform with access ladder 2 wire stations with deflection pulleys for 10 wire spool racks (without wire) The following repair and overhaul works were performed: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partly resealed - Hydraulic hose on hydraulic block replaced - Wire feed wear tracks at bottom passages welded and smoothed - Tying mechanism cleaned and serviced - Electrical system refurbished, some door switch contacts replaced - Wirbulator repaired - General maintenance performed, lubricated - Machine tested in running mode, without material, in manual and automatic mode (see functional video) Remarks: The plant has already been fully dismantled, stored, and is available at short notice for loading. Documentation (operating manual, CE certificate, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical data or possible errors.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Merek: HSM Tipe: V-press 860 plus Tahun pembuatan: 2012 Tekanan tekan: 532 kN Tegangan: 400 V Berat bal maksimal: 480 kg (tergantung material) Ukuran bal: 120 x 110 x 85 cm Berat mesin: 2083 kg Dimensi mesin: 180 cm x 125 cm x 298,5 cm Ukuran lubang pengisian: 120 cm x 65 cm Kondisi: sangat baik! Telah dicek fungsinya. Video mesin saat beroperasi tersedia atas permintaan. Layanan FLITS Rental & Sales: setiap mesin dilengkapi dengan satu bundel kawat pengikat (120 kawat). Membutuhkan lebih banyak bundel kawat pengikat? Silakan ajukan permintaan penawaran. Hfsdpfxey N Ratj Aansg

Kondisi: sangat baik (bekas), HSM V-Press 825 plus baler Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Feed opening (width x height): 1195 x 530 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Machine dimensions (width x depth x height): 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Waste materials: film, mixed paper, cardboard, die-cutting waste, textiles Year of manufacture: 2012-2014, price: 6,000 EUR Hsdsv Akcijpfx Aanjfg HSM V-Press 825 pro baler, year: 2019-2021, price: 9,000 EUR

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penekanan: 80 t, dixi-80-sld-horizontalpresse Hfjdpoy Iykxofx Aanog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, berat bal: 370 kg, HSM-HL-4010-ReLi-HU-IT-LT Hsdpfxey Iyd So Aanefg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 2 t, panjang bal: 1.200 mm, lebar bal: 500 mm, tinggi bal: 400 mm, berat bal: 100 kg, berat keseluruhan: 1.820 kg, Ini adalah mesin press baling sepenuhnya otomatis yang mengikat bal dengan dua kawat baja (diameter 2,2 mm). Sebuah kipas meniup kertas limbah ke dalam mesin melalui tabung khusus berdiameter 100 mm. Kipas dan tabung sepanjang kurang lebih 10 meter sudah termasuk dalam harga. Mesin dalam kondisi kerja dan dapat diuji coba. Dijual karena jarang digunakan; ideal untuk pengepakan kertas limbah dari percetakan dan produk higienis. Hfsdpfx Aasy Ic Rusnog

Kondisi: siap digunakan (bekas), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Hfodsra Rbgjpfx Aansg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, big bags, polystyrene HSM V-Press 860 plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 HSM V-Press 860 plus baler, year 2019, price: €9,000 HSM V-Press 860 plus baler, year 2024, price: €10,000 HSM V-Press 860, new, demo model, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000-1200 Bale weight (approx.): 500 kg Technical data: L x W x H (mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1500 x 651 mm Bale dimensions (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Pressed material: film, cardboard Idle cycle time: 25 s

Kondisi: baik (bekas), Mesin press Strautmann AutoLoadBaler Mesin press untuk: - Karton - Plastik film - Botol PET - Busa - Kaleng - Limbah elektronik Hodpfx Ajv Aktnjanofg Dimensi mesin (panjang / lebar / tinggi): 2047 / 2179 / 2950 mm Bukaan: sekitar 1192 mm / 575 mm Ukuran bale (panjang / lebar / tinggi): 1200 / 800 / 1100 mm Berat bale: sekitar 480 kg Tekanan press: 530 kN Tahun produksi: 2017-2018

Kondisi: baik (bekas), 1 Hfsdev Akr Ropfx Aansg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Model HSM HL 3521 S dengan bukaan pemuatan yang sangat besar adalah perangkat optimal untuk memadatkan sejumlah besar kertas, karton, plastik film, dan bahan kemasan lain yang berukuran sangat besar dan tidak praktis. Model HSM HL 3521 S juga merupakan spesialis untuk memampatkan bahan yang sangat mudah mengembang seperti busa. Press dibeli dalam kondisi baru dari pabrik. Selalu mendapatkan servis rutin. Hfjdpfsy H Dazjx Aansg Harga mesin baru: sekitar 90.000 € Tahun produksi: 2023 Gaya tekan: 320 kN Berat baling maksimum: 600 kg Dimensi unit (lebar x panjang x tinggi): 7900 x 1660 x 2485 mm Bukaan pemuatan (lebar x tinggi): 800 x 2100 mm Tersedia beberapa unit model HL 3521S dari tahun produksi: 2011 / 2015 / 2017 / 2023.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en Hjdpfsy A Ibnex Aanjfg

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Bale Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Hfedpfxsy Avlnj Aanog Cycle time: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We assume no liability for the details provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Bale Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Hsdpey Avhcofx Aanofg Cycle time: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We assume no liability for the details provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Bale Press Presona LP 85 VH2 with cross-binding, year of manufacture 2018 Technical Data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1200 m³/h Throughput at 30-100 kg/m³: 13-30 t/h Tying: 5x vertical, 3x horizontal Hydraulic tank capacity: 2,000 L Transport dimensions press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg Hfsdpfoyz Snpex Aanjg The press has been dismantled from ongoing operation. Technical documentation is available. Please note: All technical data refers to information provided by the manufacturer. We assume no liability for the correctness or completeness of the given details or for possible errors. This offer is subject to prior sale, is non-binding, and may be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Vertical baler HSM VL 600, year of manufacture 2002 Technical Data: Manufacturer: HSM Model: HSM VL 600 Year: 2002 Pressing force: 60 t Drive power: 7.5 kW Cycle time (idle): 37 s Filling height: 1130 mm Feed opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: Suitable for paper, cardboard, film, car tires The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Operating manual and CE Declaration of Conformity are included. Inspections, including under power, are possible by appointment at any time. On request, we can also perform tests with your material for a service fee. Hsdpfxjyz Sa Sj Aanjfg Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. Sale ex works, without warranty and guarantee, payment in advance.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Baler Paal Pacomat II, year of manufacture 1979 Technical Data: Manufacturer: Paal Model: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Feed opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5,200 kg Materials: Paper, cardboard, film Remarks: The machine is in functional condition. It has been checked and tested at our facility in 28816 Stuhr. You can find the video on our website or YouTube channel. Hfodpfxsyz Sals Aanjg Inspections, including under power, are possible at any time by prior arrangement. Please note: All technical data is based on manufacturer's information. We do not accept liability for the accuracy of the information provided or for any errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections by appointment only. Sale is ex location, without warranty or guarantee. Our payment condition is 100% payment in advance.

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 28.155 h, Fungsionalitas: berfungsi sepenuhnya, en-001 Hodpfx Aoyz R Uusanefg

Kondisi: baik (bekas), Tahun pembuatan: 2019, jam operasional: 1.022 h, Fungsionalitas: berfungsi sepenuhnya, Bale Press Presto CC 20 M, Year of Manufacture 2019 Technical Data: Manufacturer: Presto Model: CC 20 M Year of Manufacture: 2019 Hfedsyz R S Hepfx Aansg Operating Hours: 1022 Pressing Force: 20 t Cycle Time: 24 s Drive Power: 7.5 kW Filling Opening: 1030 x 750 mm Filling Volume: 0.53 m³ Tying System: 3-fold, manual Throughput Output at Bulk Densities of: 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale Dimensions: 700 x 750 mm Bale Weight: up to 300 kg Machine Dimensions (LxWxH): 3300 x 1235 x 1860 mm Machine Weight: approx. 2500 kg Materials: Paper, Cardboard, Film Note: The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or our YouTube channel. Please note: All technical data is based on the manufacturer’s information. We accept no liability for the details provided or any possible errors. Offers are subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. The sale is ex works, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 1.640 h, Fungsionalitas: berfungsi sepenuhnya, Baling Press Presto CC 40 M, Year of Manufacture 2017 Technical Data: Manufacturer: Presto Model: CC 40 M Year of Manufacture: 2017 Pressing Force: 40 t Cycle Time: 34 s Drive Power: 15 kW Filling Opening: 1080 x 1100 mm Filling Volume: 0.85 m³ Tying: 4-fold, polyester tape, manual Throughput at bulk densities of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale Dimensions: 750 x 1100 mm Bale Weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine Weight: approx. 3800 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Note: Discharge channel with fully automatic control. Hfjdpfx Aeyz R Hqsanog Please note: All technical data is based on manufacturer information. We accept no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 7.145 h, Fungsionalitas: berfungsi sepenuhnya, Channel baler Presto HPK 50 HS, year of manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Hfedpeyz R Eysfx Aanjg Year of Manufacture: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1,600 x 650 mm (L x W) Channel Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Binding: 4-fold Throughput Rate at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles Note: The knives, counter-knives, and all sliding plastics have been replaced. The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Please note: All technical data are based on manufacturer's information. We do not accept any liability for the specifications provided or possible errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections by appointment only. Sale is ex-works, payment in advance, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2015, jam operasional: 1.932 h, Fungsionalitas: berfungsi sepenuhnya, Balers Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tip device Technical data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput with bulk density of: 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or YouTube channel. Please note: All technical data are based on manufacturer’s information. We do not accept liability for the accuracy of the details or for possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Hfsdpfx Asyz R Etoanjg Inspection possible by prior arrangement. Sale on advance payment, ex works, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 14.490 h, Fungsionalitas: berfungsi sepenuhnya, balenpresse-presto-cc-30-v-baujahr-2006 Hjdpfx Aoyz Il Deansfg