Beli Mesin pengepres bal bekas (217)

Kondisi: sangat baik (bekas), jam operasional: 2.658 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 71 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 1.620 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 600 kg, arus masuk: 200 A, kapasitas tangki oli: 1.250 l, berat kosong: 29.000 kg, Technical Data – Baler: Manufacturer: BOA Recycling Systems B.V. Model: Impress M75-45-A-5-1.6 Ecoline Year of manufacture: 2021 Operating hours: 2,658 hours (as of May 2024) Number of bales produced: 42,212 units (as of May 2024) Main press force: 71.2 kN (71 t) Specific compaction pressure: 9 kg/cm² Operating pressure: 280 bar Cylinder stroke: 2,200 mm Charge box dimensions: 1,620 x 1,000 mm Filling volume per press cycle: 2.4 m³ Theoretical cycle time: 21 seconds Psdpfxeu Thcvo Ab Ijgw Theoretical throughput: 450 m³/hour Bale dimensions: 1,100 x 720 mm; length adjustable up to 1,400 mm Drive power: 45 kW Connected load: 100 kW Current consumption: 200 A Tying: 5-fold vertical, fully automatic; ram pre-equipped for additional 3-fold horizontal tying Throughput rates at bulk densities of: – 30 kg/m³: approx. 13.6 t/hour – 60 kg/m³: approx. 24.2 t/hour – 100 kg/m³: approx. 36.4 t/hour – 150 kg/m³: approx. 54.7 t/hour Bale weight: up to 600 kg, depending on material Hydraulic oil tank capacity: 1,250 L PLC control: Siemens S7 1500 Operator panel: Siemens SIMATIC HMI TOUCH Transport dimensions (Baler): 10,000 x 2,800 x 3,385 mm (L x W x H) Baler height (assembled with feed chute): 4,743 mm Baler height (assembled with conveyor): 7,123 mm Machine weight (Baler): 29 t Noise level:

Kondisi: baik (bekas), Tahun pembuatan: 2019, jam operasional: 1.022 h, Fungsionalitas: berfungsi sepenuhnya, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical Data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Feed opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput (at bulk densities of): 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Pgjdpfx Aboxfh H Hj Ijw Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: Paper, cardboard, film Remarks: The machine is in good condition. It has been inspected and tested at our location in 28816 Stuhr. A video can be found on our website or YouTube channel. Viewings, including under power, are possible at any time by arrangement. On request, we can also perform tests with your material for a handling fee. We are happy to answer any questions regarding the machine by phone from Monday to Thursday, 8:00 am to 2:00 pm, and on Friday from 8:00 am to 1:00 pm. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of the information or for any errors that may occur. Offers are subject to change and prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale is ex works, without warranty or guarantee.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 42.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LP100DH4, Used Presona LP100DH4 baler in good working condition Type: LP 100 DH4 Year of manufacture: 1996 Pressing force: 100 t / 1000 kN Electric motor power: 2 x 55 kW Capacity: 960 m³/hour Capacity at a density of: 30 kg/m³: 13–17 t/h 50 kg/m³: 17–21 t/h 100 kg/m³: 21–32 t/h Pgjdpfxexn T S To Ab Iew TBO: 22–33 t/h Feed hopper: 2050 x 1100 mm Press chamber volume: 3.7 m³ Bale weight: up to 500–725 kg Bale height: 750 mm, bale width: 1100 mm, bale length: adjustable Number of vertical strapping rows: 5 Oil tank capacity: approx. 2000 liters Maximum oil pressure: 250 bar Machine weight: approx. 35 tonnes Digital fault display: 100 mm Loading device Guide system for transferring bales from the chute to the floor Fully automatic strapping system with 5 rows of strapping wire Wire guides for feeding 10 spools with a weight of 500 kg Hydraulic system with cartridge mounting Control system for 2 conveyors Baling control system with PLC control Photoelectric sensors for two-stage filling of the press chamber Hour counter Bale counter Bale length measuring counter Technical documentation

Kondisi: baik (bekas), HSM 155.1 VL baler Pressing force: 18 tons Specific pressure: 2.33 kg/cm² Theoretical performance: 3 bales/h, i.e. approx. 500 kg/h Bale dimensions: 1100 x 700 x 800 mm Psdpsv Alacofx Ab Iogw Bale weight: 150–250 kg Power supply: 400 V / 4 kW

Kondisi: baik (bekas), Manufacturer: Comp Model: SB5 Motor: 2.2 kW Piston stroke: 500 mm Pjdpfoh Eic Aox Ab Ijgw Chamber dimensions: 500 x 350 x 400 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 91-01611001, gaya penekanan: 16 t, lebar bukaan pengisian: 545 mm, panjang bukaan pengisian: 680 mm, panjang bal: 800 mm, lebar bal: 600 mm, tinggi bal: 550 mm, berat bal: 80 kg, lebar total: 860 mm, tinggi total: 1.680 mm, panjang total: 3.530 mm, berat keseluruhan: 1.200 kg, daya: 3 kW (4,08 hp), Baler horizontal yang dapat diisi melalui corong, memungkinkan penggunaan sensor cahaya. Pengikatan dilakukan secara manual dua kali dengan tali pengikat. Penawaran harga diharapkan. Pgjdpov T R Utofx Ab Iew

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. Pgjdjvf E Avjpfx Ab Isw The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baik (bekas), Tahun pembuatan: 2015, jam operasional: 1.932 h, Fungsionalitas: berfungsi sepenuhnya, Baling Press Presto CC 50 M, semi-automatic, year of manufacture 2015, pressing force 50 t, with lifting-tilting device Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Pgsdpjxfh Htefx Ab Isw Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk densities of 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film Operating manual available in German. Note: The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. The video can be found on our website or YouTube channel. Inspections, including under power, are possible by appointment at any time. On request, we can also perform tests with your material for a handling fee. We are happy to answer any questions regarding the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not accept any liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Kondisi: bekas, High-Performance Baler MACFAB - BEMA Type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, and secondary raw materials Serial No. MF J0162 Year of manufacture: 2021 Pressing force: 50 tons Press plate stroke: approx. 1000 mm Cycle time per stroke: approx. 40 sec. Press chamber base area: 1500 x 1100 mm Press chamber height: 1650 mm Filling opening: 1500 x 870 mm Filling height: approx. 1250 mm Bale size: 1500 x 1100 mm Bale height: max. 1100 mm Hydraulic operating pressure: 200 bar Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz, 12 Amp. - Equipped with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Press operation possible only when press chamber door is closed - Two-hand control for hydraulic ejection of finished bale - Clearances for manual strapping - Produces standard industrial bales of 1500 x 1100 x 1100 mm - The highly compacted bale is automatically tilted onto a pallet - Only 62 operating hours Installation dimensions (L x W x H): 2120 x 1350 x 3220 mm Transport height with retracted hydraulic cylinders: approx. 260 cm Weight: 1.8 tons The machine is in excellent, as-new condition. The new price for this press from BEMA is EUR 22,200 net. BEMA also purchases packaging waste that you bale with this press. Pgjdpfsvq Rtksx Ab Iew

Kondisi: sangat baik (bekas), Technical data: Pressing force: 178 kN Drive power: 4 kW Pjdpfov Akmzsx Ab Iogw Cycle time: 23 s Loading height: 928 mm Loading aperture width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold strapping with polyester tape Year of manufacture: 2010-2013

Kondisi: baik (bekas), Manufacturer: MBT Type: MV-250 S Motor: 5.5 kW Podpfxjhzr U Ie Ab Iogw Hopper size: 780 x 600 mm Housing dimensions: 3500 x 1000 x 2200 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 71 t, lebar bukaan pengisian: 1.080 mm, panjang bukaan pengisian: 1.620 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 600 kg, lebar total: 3.450 mm, tinggi total: 4.090 mm, panjang total: 10.020 mm, tegangan masuk: 400 V, berat keseluruhan: 27.000 kg, tingkat kebisingan: 85 dB, tekanan: 300 batang, tinggi transportasi: 2.300 mm, daya: 37 kW (50,31 hp), nl-hu-001 Pgjdpfxsxl Rqbj Ab Isw

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 20.536 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat kosong: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Pgodou Thypopfx Ab Isw Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: – 30 kg/m³: approx. 6.0 t/h – 50 kg/m³: approx. 10.5 t/h – 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special equipment: – Wear-resistant floor made of HARDOX steel – Special press ram for compacting "difficult" materials and loose bulk goods with small grain size – Control cabinet climate control – Machine foot raising by 200 mm Note: The machine is currently in our workshop and undergoing partial refurbishment. We expect the refurbishment to be completed by the end of October, after which the machine will be tested and released for sale.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W230-028, gaya penekanan: 80 t, masa garansi: 24 bulan, tekanan: 250 batang, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The machine in question is an HBC80 baler (45kW) with vertical tying. This baler has been completely refurbished in our dedicated refurbishment workshop. The refurbishment has been performed in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Following refurbishment, this baler is sold with a 2-year warranty included. The press is supplied with the following options: * support frames, * intermediate hopper, * bale exit chute, * wire spool platforms. Psdstvat Tjpfx Ab Isgw

Kondisi: baik (bekas), - Lubang pengisian besar, ideal untuk kotak berukuran besar - Dump truck kontainer untuk pengisian yang nyaman Gaya dalam kN: 400 Panjang bal: 1.100 mm Lebar bal: 750 mm Tinggi bal: 750 mm Panjang mesin press: 5.640 mm Lebar mesin press: 1.674 mm Tinggi mesin press: 2.500 mm Berat: 4.450 kg - Daya motor dalam kW: 9 - Tegangan/frekuensi: 3 x 400 V / 50 Hz - Berat bal dalam kg (tergantung material): hingga 350 kg Pedpfx Asv Amv Esb Iegw - Pengikatan manual: 3 kali dengan kawat Tahun pembuatan: 2013 Mesin press baling HSM HL 4010 LI - Lubang pengisian besar, ideal untuk kotak berukuran besar - Dump truck kontainer untuk pengisian yang nyaman Gaya dalam kN: 400 - Daya motor dalam kW: 9,5 - Tegangan/frekuensi: 3 x 400 V / 50 Hz - Berat bal dalam kg (tergantung material): hingga 350 kg - Pengikatan manual: 3 kali dengan kawat Tahun pembuatan: 2012

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 54.050 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, kapasitas tangki oli: 2.100 l, daya: 94 kW (127,80 hp), berat kosong: 21.000 kg, Technical Data – Baler: Manufacturer: Paal Model: Konti 275 E Year of manufacture: 2006 Total operating hours: 54,050 hours Main press force: 80 t at 300 bar Specific press force: 9.7 kg/cm² Feeding chute dimensions: 1,600 x 1,020 mm (L x W) Throughput under operating conditions: 350 m³/h Bale dimensions: 750 x 1,100 mm, length variable Drive power: 75 kW Total connected load: 94 kW Rated current: 180 A Tying system: 4-fold vertical, fully automatic Bale weights: up to 750 kg, depending on material Hydraulic oil tank volume: 2,100 L Psdpexcxm Esfx Ab Iogw PLC (Make/Type): Siemens Simatic S7-300 Control panel (Make/Type): Siemens Multi Panel Transport dimensions press only: 11,152 x 2,152 x 3,000 mm (L x W x H) Press weight approx.: 21 t Condition of baler with conveyor: The baler and conveyor are in a satisfactory, operational condition, see photo documentation. Further technical data and dimensions for the conveyor are currently not available. The plant is currently still in operation and will be replaced in the coming months by a larger baling system. Scope of supply: Baler, bale slide, conveyor belt and machine documentation. Remarks: The documentation (operating manual, CE, electric/hydraulic circuit diagrams) is complete. An inspection is possible by arrangement. Dismantling and loading is the responsibility of the buyer. We do not accept liability for the technical data or for possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HBC 140 2x75kW 2001 (210-008-01), gaya penekanan: 155 t, berat bal: 1.500 kg, tekanan: 250 batang, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, Verkocht door Bollegraaf Recycling Solutions, de oorspronkelijke fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-rattenbekabeling Psdpfstvau Ajx Ab Iogw 0 uur na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit bevat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na de demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende onderdelen: • Persplunjer • Frame • Kanaal • Voordruk-klep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventueel las- en herstelwerk worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen en slangen worden vervangen. De hydraulische componenten worden gereviseerd. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en teruggeplaatst op eenvoudig toegankelijke posities. Slijtagedelen: Alle slijtagedelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtagedelen van (beide) naaldinstallaties en knopers worden vervangen. Cilinders: De cilinders worden gereviseerd en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (‘human interface’) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Kondisi: siap digunakan (bekas), Model Baler HSM V-press 1160 plus Pgedpfx Abora Nyue Ijw Tekanan (kN): 532 Kapasitas (bale/jam): 1-2 Ukuran bale maksimum (mm): 1200x1100x1000-1200 Dimensi panjang x lebar x tinggi (mm): 1780x1150x2985 Daya (kW): 7,5 Tahun 2007-2008 harga 5500 eur Tahun 2009-2010 harga 5800 eur Tahun 2011-2013 harga 6300 eur Kami juga memiliki Baler HSM v press 1160 max tahun 2014-2015 Berat (kg): 2300 TAHUN 2017-2018 JUGA TERSEDIA – 7500 eur

Kondisi: baik (bekas), Tahun pembuatan: 2012, jam operasional: 12.078 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 88 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 30.000 kg, kapasitas tangki oli: 2.000 l, daya: 98 kW (133,24 hp), laju aliran volumetrik: 643 m³/jam, en-001 Pgjdpfx Aexcngneb Iew

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, jam operasional: 23.000 h, nomor mesin/kendaraan: 00834, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.315 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, masa garansi: 3 bulan, daya: 30 kW (40,79 hp), tahun perombakan terakhir: 2025, Perlengkapan: dokumentasi / manual, de Pgsdpfexck U Uox Ab Iow

Kondisi: siap digunakan (bekas), Bramidan 4-0F Motor: 4 kW Dimensi alat press: 250 x 100 x 255 cm Dimensi bale: 1100 x 700 x 950 mm Berat bale: 200–250 kg Pgedpfxev Ai Uqo Ab Isw Tekanan: 18 ton Berat: 1580 kg Perangkat ini digunakan untuk mengurangi volume limbah seperti plastik film, kertas, dll. Kami juga memiliki mesin press Bramidan 3 ruang.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 5.612 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 550 kg, tinggi total: 2.800 mm, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.800 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), berat kosong: 12.000 kg, laju aliran volumetrik: 332 m³/jam, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Type: VK 4812 Year of manufacture: 2014 Operating hours: 5,612 hours as of August 2025 Main press force: 48 t Specific pressing force: 58.2 N/cm² Feed chute dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 sec Theoretical throughput: 332 m³/h Bale dimensions: 1,100 x 750 x 600 up to 1,200 mm Drive motor power: 30 kW Total connected load: 32 kW Pedpfxjvtpq He Ab Iogw Rated current: 59 A Tying: 4-fold horizontal, fully automatic Throughput at bulk density of 20 kg/m³: up to 6 t/h, depending on material Bulk density of 50 kg/m³: up to 13 t/h, depending on material Bale weights: up to 550 kg, depending on material PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI touch panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Installation dimensions with bale slide: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions (baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine weight (baler) approx. 12 t Scope of delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire spool boxes for 8 pieces of 40 kg wire spools, without wire - Bale slide - Machine documentation in German Comments: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left-hand side in pressing direction; the needle unit is located on the right and can be folded back for transport. The baler has been partly overhauled and tested in our workshop; see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Inspection possible by appointment. We do not accept liability for the technical specifications or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 24.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 004283-0030, gaya penekanan: 122 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, masa garansi: 24 bulan, tahun perombakan terakhir: 2026, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered by Bollegraaf Recycling Solutions. This listing concerns an HBC120s baler (90kW) equipped with, among other features, cross-tying (5 wires vertical & 5 wires horizontal). This baler is currently undergoing a complete refurbishment in our overhaul workshop. Pgedpfjxcir Esx Ab Iew The refurbishment is carried out in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler will be sold with two years warranty included. Technical Specifications, type HBC120S Volume capacity (m3/h) - max.: 815 / 660 / 500 Bulk density (kg/m3) - max.: 20 / 50 / 100 Throughput capacity (T/h) - max.: 16.3 / 33 / 50 The above-mentioned capacities apply only if the machine is used correctly and is continuously and adequately fed with suitable material for at least one hour. Bale weight: approx. 1470 kg (depending on, among others, the type of material and length of bale) Bale length: variable / adjustable Bale height: 1100 mm Bale width: 1100 mm Hopper dimensions: 1100 mm x 1600 mm (these dimensions also determine the size of material that can be processed by the machine). Ram pressure force: max. 119.7 tons Pre-press flap pressure force: max. 65 tons Cycle time, excl. wire tying: 19 seconds Main drive motor: 90 kW (120 HP) Twistomat (knotter) motor: 1.5 kW, SEW Counter pressure pump motor: 1.1 kW (2 HP) Needle installation motor: 7.5 kW, SEW Oil cooler fan motor: 3 kW (4 HP) Pump for oil cooling motor: 4 kW (5.5 HP) Operating pressure: 315 bar Machine weight: approx. 40,040 kg Number of wires: - 5 vertical - 5 horizontal Oil volume: 1,655 liters Oil brand and type: BP-SHF-46 Color: - baler: RAL 6024 (green) - safety doors: RAL 1021 (cadmium yellow) Baler dimensions: - length: 11,765 mm - width: 2,500 mm - height: 7,104 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 34.480 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 19.000 kg, tinggi transportasi: 3.300 mm, kapasitas tangki oli: 750 l, daya: 45 kW (61,18 hp), en_Bollegraaf_HBK100_techdata_2024-06-30 Pjdsxbgnhspfx Ab Iegw

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 13.209 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.050 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 700 mm, berat bal: 500 kg, kapasitas tangki oli: 400 l, berat kosong: 8.500 kg, tahun perombakan terakhir: 2025, laju aliran volumetrik: 108 m³/jam, en-GB Pgjdpfsw U Dt Nex Ab Ijw