Beli Press hidrolik satu tiang bekas (66)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1995, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: H95-2601, tinggi total: 2.400 mm, tinggi meja: 830 mm, tinggi pemasangan: 750 mm, lebar total: 1.100 mm, panjang total: 1.200 mm, kedalaman tenggorokan: 260 mm, gaya penekanan: 16 t, lebar meja: 700 mm, panjang meja: 460 mm, kecepatan operasi: 180 mm/dtk, berat keseluruhan: 2.700 kg, kecepatan mundur: 450 mm/dtk, jenis arus masuk: tiga fasa, panjang langkah: 370 mm, kapasitas tangki oli: 500 l, tegangan masuk: 400 V, kecepatan penekanan: 40 mm/dtk, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Mesin press sedang menjalani perbaikan total. Seal silinder telah diganti dan pompa hidrolik telah diperiksa fungsinya. Dilengkapi dengan blok pengaman hidrolik yang memenuhi pedoman keselamatan terbaru. Kelistrikan dan kontrol PLC yang benar-benar baru, termasuk tirai cahaya keselamatan di bagian depan, memastikan bahwa mesin press ini akan seperti baru. Hsdpfsxyxyyox Ag Roni

Kondisi: bekas, Tahun pembuatan: 1992, Pressure: 75 t Throat depth: 280 mm Stroke: 303 mm Total power requirement: 15 kW Machine weight approx.: 7,000 kg Hnjdpfxjt Hwrzs Ag Roi Space requirement approx.: (dimensions unspecified) Hydraulic single-column press, Type HZS 75 Year of manufacture: 1992 Serial no. H 92-2249 _____ Ram pressing force: 75 t Table size: 750 x 515 mm Table height above floor: 820 mm Through-hole in table: 300 x 200 mm Maximum installation height: 500 mm Throat depth: 280 mm Ram stroke: approx. 303 mm Ram area: 500 x 400 mm Ram bore: 50 mm Main drive: approx. 15 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Total machine height: 3,850 mm Accessories / Special equipment: - DUNKES program control Type PC 10 with data input field for pressure setting, pressure/time switching, top/bottom stroke, rapid traverse and working speeds, including digital display of pressing force, ram travel, pressing time, program number. Storage for up to 30 tool programs, Siemens S5 PLC, teach-in button - Press ram guided over adjustable prism guides - Hydraulic stroke cushioning mounted in the press cylinder, 15 mm - Motorised depth stop and stroke cushioning adjustment - Double sheet detection: Maximum pressing force only after reaching preselected position - Hydraulic tool clamps (4) on the table, hydraulic pin clamping on the ram, hydraulic ejector in the ram, 3 t/15 mm - Safety two-hand control, electrical and stepless return stroke limitation - Overrun monitoring devices NKS, ram switching for the upper piston - Mounted control cabinet, connection for oil cooler, etc.

Kondisi: bekas, Tahun pembuatan: 1990, Pressure: 25 t Throat Depth: 250 mm Stroke: 100 mm Total Power Requirement: 7.5 kW Machine Weight: approx. 3,200 kg Space Requirement: approx. 1,000 x 1,700 x 2,600 mm DUNKES CNC-Controlled Hydraulic C-Frame Press Model: HZS 25 Year of Manufacture: 1990 Serial No.: H 90-2018 Hsdpfx Aot Hw Ezeg Rjni ----- Ram Force (Upper Ram): 25 t Table Size: 620 x 460 mm Table Height Above Floor: 820 mm Through Hole in Table: 100 mm Maximum Installation Height: 350 mm Throat Depth: 250 mm Ram Stroke: approx. 100 mm Ram Surface: 500 x 350 mm Ram Bore: 32 mm Working Speeds: Rapid Traverse Up/Down: 400/400 mm/s at Partial Load / at Full Load: 50 / 18 mm/s Total Drive: approx. 7.5 kW - 380 V – 50 Hz Weight: approx. 3,200 kg Machine Dimensions: 1,000 x 1,700 x 2,600 mm Accessories / Special Equipment: • DUNKES program control type CNC 100 with data entry panel for adjusting pressure, pressure/time switching, upper/lower stroke, rapid and working speeds, as well as digital display of pressing force, ram travel, pressing time, program number. Storage for up to x tool programs, SIEMENS S5 PLC, Teach-In button. • Hydraulic shock absorber mounted in the press cylinder. • SICK light curtain and safety two-hand control. • Intermediate tables mounted, attached control cabinet. • Overrun time 85 ms / overrun distance 30 mm, safety distance 170 mm. Condition: good to very good – powered and ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice We look forward to receiving your order. A further selection of hydraulic presses is always available in our warehouse – please contact us for more information.

Kondisi: bekas, Tahun pembuatan: 1971, en-GB Hedpfx Aget Hw Dwj Rjni

Tahun pembuatan: 1979, Kondisi: bekas, nomor mesin/kendaraan: 3534, Pressing force: 630 kN Return force: 100 kN Max. ram stroke: 200 mm Hnedob Hk Dzopfx Ag Rji Installation height: 400 mm Throat depth approx.: 350 mm Table size: 610 x 800 mm Table through-hole: 100 mm Ram bore: 40 mm Ram advance speed: 350 mm/s Ram pressing speed: 18 mm/s Ram return speed: 380 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 1800 x 920 x 2440 mm Weight: 3.94 t

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Working speed: 10 mm/min Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Hjdpfxowp Nv Ho Ag Rjni Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Hydraulic Press VEB Zeulenroda PYE10N Kondisi bekas seperti yang ditampilkan pada gambar Semua data dapat dilihat pada foto pelat tipe. Hnedow S Uccjpfx Ag Rji

Kondisi: baik (bekas), Tahun pembuatan: 1981, nomor mesin/kendaraan: 022-009-36, Penawaran 24374 Data teknis: - Gaya tekan maks.: 100 t - Langkah piston maks.: sekitar 500 mm - Kecepatan langkah: 25 mm/dtk - Kecepatan balik: 125 mm/menit - Tinggi instalasi: sekitar 1000 mm - Jangkauan hingga tengah piston: 380 mm - Permukaan penjepit piston: 530 x 400 mm - Pin penjepit piston: 40 mm - Ukuran meja: 750 x 560 mm - Lubang tembus di meja: 200 mm - Tinggi meja di atas lantai: 720 mm - Kapasitas oli: sekitar 200 ltr - Penggerak: 400 V / 11 kW - Kebutuhan ruang: sekitar L 1150 x T 3250 x D 1850 mm Hodjxuhzcepfx Ag Rjni - Berat: sekitar 4600 kg

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: Seriennummer: 9302394, CNC control HATASTAR 2000 Pressing capacity: 500 t or 5000 kN Tooling available in addition to the machine Control cabinet on the left X1 + R / X2 + R axes on linear guide Y1 + Y2 axis Hydraulic upper tool clamping Pneumatic sheet following device + front stops on linear guide Second two-hand operation Universal die 100 x 100 x 5,100 mm Gooseneck blade 280 x 5,100 mm Hnsdpfsd Egc Aex Ag Roi Die centering plate, width = 111 mm

Kondisi: bekas, Tahun pembuatan: 1994, Pressure: 100 t Throat depth: 280 mm Ram stroke: 300 mm Table size: 1000 x 600 mm Ram clamping surface: 600 x 400 mm Total height above floor: 300 mm Overall width: 1200 mm Operating voltage: 380 V Approx. machine weight: 4 t 100 t Hydraulic Press, Sahinler brand Model: GHP 100 Hydr Press force: 100 t Table size: 1000 x 600 mm Ram size: 600 x 400 mm Hnsdpfxjt Hmk Ho Ag Rei Additional ram plate approx. 900 x 600 mm

Kondisi: bekas, Tahun pembuatan: 1979, Pressure: 63 t Throat depth: 315 mm Stroke: 200 mm Drive power: 15 kW Hnedpscxxmksfx Ag Roi Ram stroke: 200 mm Max. installation height: 450 mm Table size: 710 x 630 mm Ram clamping area: 710 x 630 mm Return force: 1.3 t Closing speed: 210 mm/min Return speed: 210 mm/sec Overall height above floor: 2500 mm Overall width: 1000 mm Depth: 1600 mm Motor speed: 1500 rpm Operating voltage: 380 V Control voltage: 220 V Machine weight approx.: 5 t Electro-hydraulic press control, fixed safety valve set to prevent overload, safety interlock, two-hand push button and emergency stop mushroom switch, stepless stroke adjustment, stepless pressure regulation, fully automatic continuous operation, mechanical stepless adjustable stop integrated in the cylinder. The stop adjustment is made via a handwheel with indicator scale. Automatic star-delta starter for the 15 kW motor.

Kondisi: bekas, nomor mesin/kendaraan: 51568, Pressure: 100 t Stroke: 0-500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Through-hole in table: 355 mm Hnsdpfx Aecxxrrog Rei Table height above floor: 800 mm Installation height: 1130 mm Approx. machine weight: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with stroke in upper position. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun measurement 135 mm/s, overrun distance 44 mm.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi pemasangan: 400 mm, kedalaman tenggorokan: 230 mm, gaya penekanan: 40 t, lebar meja: 700 mm, panjang meja: 450 mm, panjang langkah: 250 mm, PRESS C-frame BARU EXNER EEX SLL 40 Standard Line LIGHT Tahun pembuatan: 2025 Kekuatan tekan: 400 kN Tinggi pemasangan: 400/450 mm Langkah (stroke): 250 mm Meja (lebar): 700 mm Meja (kedalaman): 450 mm Jangkauan (throat depth): 230 mm Hedpfx Agjw Nx Nhs Roni

Kondisi: baik (bekas), JDS hydraulic press Bed: 505 x 510 mm Hnsdoiki Ahepfx Ag Rsi Dimensions: 140 x 140 x 285 cm (L x W x H)

Tahun pembuatan: 1990, Kondisi: seperti baru (mesin pameran), Eckolt hydraulic press in mint condition Hnodpfx Ajd Siacjg Rji with plate holder included see PDF for technical specifications

Kondisi: bekas, Hydraulic Press LBM B10 Hnjdpfx Agjxbt E Hj Rji