Beli Press hidrolik satu tiang bekas (61)

Kondisi: bekas, Tahun pembuatan: 1982, Technical details: Dkjdpfxordlgio Aavsw Pressure: 2.5 t

Kondisi: baik (bekas), Tahun pembuatan: 2014, laju aliran volumetrik: 1.570 m³/jam, Becker Variair RV 2.1944/10 vacuum pump Dkjdpjv Anv Tsfx Aavsw Relative pressure: +410 mbar Volumetric flow rate: 1570 m³/h Weight: 60 kg + 21 kg inverter

Kondisi: bekas, Tahun pembuatan: 1992, HYDRAP tipe HPSKZ 63t / 20t Tekanan: 63t Dimensi meja bawah: 700x700 mm Dimensi meja atas: 600x600 mm Panjang langkah: 600 mm Jarak bebas: 800 mm Dkjdpsw R Aamjfx Aavow Bantalan: 20t

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, panjang langkah: 500 mm, kecepatan operasi: 200 mm/dtk, kecepatan mundur: 200 mm/dtk, lebar meja: 750 mm, panjang meja: 560 mm, tabel jarak ke piston: 800 mm, panjang total: 1.560 mm, lebar total: 1.200 mm, tinggi total: 3.200 mm, berat keseluruhan: 5.040 kg, Mesin press dalam kondisi baik. Sepenuhnya lengkap dan terhubung listrik. Dksdpsxwuz Uefx Aavow

Kondisi: bekas, Technical details: Pressing force: 2.3 t Dsdpfsu Nfwlox Aavjkw Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Shut height with bolster plate/ram up: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Through-hole in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Taper hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions (LxWxH): approx. 0.6 x 0.7 x 1.6 m Press with mechanical 2-hand operation. Pressure test performed up to 2.3 t. Good condition.

Kondisi: bekas, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Through-hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Dkedpfx Aeu Nfuqsavjw Additional technical features: -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 30 t, lebar meja: 600 mm, panjang meja: 600 mm, panjang total: 1.869 mm, lebar total: 850 mm, tinggi total: 2.620 mm, berat keseluruhan: 2.900 kg, Hidrobrasil C-Frame Hydraulic Press – 30 t – 600 × 600 mm – 400 mm Stroke For sale is a compact C-frame hydraulic press manufactured by Hidrobrasil, offering 30 t pressing force. This machine features a table size of 600 × 600 mm and is ideally suited for assembly, straightening, and pressing operations, as well as for small batch production in workshop and industrial environments. ==== Technical Data & Information: Hydraulic C-Frame Press – 30 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: C-Frame Press - Design: C-frame (single-column) - Machine designation: Assembly press - Pressing force: 30 t - Machine weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table size: 600 × 600 × 100 mm - Clearance behind the table plate: 50 mm - Table mounting points: 600 / 800 / 1000 mm ==== Speeds - Downstroke speed: 10 mm/sec - Return speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Assembly work, pressing operations, straightening work, workshop applications, small-batch production Hydraulic press, C-frame press, single-column press, assembly press, industrial press Dedpevhcykefx Aavjkw

Kondisi: bekas, Tahun pembuatan: 2021, nomor mesin/kendaraan: A2536805, gaya penekanan: 40 t, Hidralmac single-column press – 40 t forging press – stroke 250 mm For sale is a hydraulic single-column press (C-frame press) from the manufacturer Hidralmac with a press force of 40 t. The machine is designed for forging, forming, and bending operations and can be custom-built to individual customer requirements. Thanks to adjustable speeds, precise position control, and flexible operating modes, it is suitable for both manual setup work and automated processes. ===== Technical Data & Information: Hydraulic single-column press – 40 t ==== General Information - Manufacturer: Hidralmac - Model: Single-column press / forging press - Design: C-frame press - Press force: 40 t - Build time: approx. 3 months after receipt of payment ==== Working Area - Maximum daylight: 450 mm - Stroke / Travel: 250 mm ==== Table & Ram - Table plate: 600 × 650 mm with T-slots - Ram plate: 500 × 200 mm - Table opening: 200 × 170 mm - Table height: 850 mm ==== Speeds - Approach speed: max. 90 mm/s - Pressing speed: 10 mm/s - Return speed: max. 90 mm/s - Setup mode speed: approx. 9.5 mm/s ==== Hydraulics & Drive - Motor power: 5.5 kW - Oil tank: 200 l - Return force: 6.3 t Dsdpofxyhfefx Aavekw ==== Controls & Features - Positioning accuracy: ± 0.5 mm - Adjustable dwell time: 0–10 s (in 0.1 s increments) - Pressing pressure adjustable via control panel - Switching between manual and automatic mode via key switch - Two-hand control for safe operation - Sensor-based position control (top dead center, bottom dead center, switching point) ==== Operating Modes - Manual setup operation with stop at any time - Bending mode via two-hand control - Automatic mode for closed tools - Optionally usable for punching, piercing, and bending ===== Forging operations, forming technology, bending processes, punching, piercing operations, small batch production, toolmaking Single-column press, C-frame press, forging press, hydraulic press, industrial press, bending press, die tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety standard NR 12, which is based on these. Our core competency is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 1971, en-GB Dkjdpfx Aaet Hw Dwovow

Kondisi: bekas, Tahun pembuatan: 1960, Technical details: Pressure: 10 t Throat depth: 255 mm Maximum ram stroke: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height (table/ram, top): 630 mm Installation height (table/ram, bottom): 230 mm Table clamping surface: 420 x 400 mm Through-hole in table: 220 mm Ram clamping surface: 200 x 200 x 65 mm Total power requirement: 1.6 kW Machine weight approx.: 1.1 t Dsdpfxeu Nfudo Aavjkw Machine dimensions (LxWxH) approx.: 1.1 x 0.5 x 2.1 m

Kondisi: bekas, Tahun pembuatan: 1990, Pressure: 25 t Throat Depth: 250 mm Stroke: 100 mm Total Power Requirement: 7.5 kW Machine Weight: approx. 3,200 kg Space Requirement: approx. 1,000 x 1,700 x 2,600 mm DUNKES CNC-Controlled Hydraulic C-Frame Press Model: HZS 25 Year of Manufacture: 1990 Serial No.: H 90-2018 ----- Ram Force (Upper Ram): 25 t Table Size: 620 x 460 mm Table Height Above Floor: 820 mm Through Hole in Table: 100 mm Maximum Installation Height: 350 mm Throat Depth: 250 mm Ram Stroke: approx. 100 mm Ram Surface: 500 x 350 mm Dedst Hw Ezopfx Aavskw Ram Bore: 32 mm Working Speeds: Rapid Traverse Up/Down: 400/400 mm/s at Partial Load / at Full Load: 50 / 18 mm/s Total Drive: approx. 7.5 kW - 380 V – 50 Hz Weight: approx. 3,200 kg Machine Dimensions: 1,000 x 1,700 x 2,600 mm Accessories / Special Equipment: • DUNKES program control type CNC 100 with data entry panel for adjusting pressure, pressure/time switching, upper/lower stroke, rapid and working speeds, as well as digital display of pressing force, ram travel, pressing time, program number. Storage for up to x tool programs, SIEMENS S5 PLC, Teach-In button. • Hydraulic shock absorber mounted in the press cylinder. • SICK light curtain and safety two-hand control. • Intermediate tables mounted, attached control cabinet. • Overrun time 85 ms / overrun distance 30 mm, safety distance 170 mm. Condition: good to very good – powered and ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice We look forward to receiving your order. A further selection of hydraulic presses is always available in our warehouse – please contact us for more information.

Tahun pembuatan: 1991, Kondisi: bekas, Pressure: 100 t Throat depth: 380 mm Stroke: 300 mm Throat depth: 380 mm Table size: 1700 x 700 mm Ram surface: 1400 x 700 mm Installation height: 650 mm Total power requirement: 30 kW Machine weight approx.: 10 t Space requirement approx.: 2400 x 3600 x 3400 mm Force/displacement-dependent shut-off BWS (safety monitoring system) for protective and cycle operation Fixed stop Dodpfx Ajlp U Ayjavokw Pressure switch Rapid approach/work stroke Two-hand operation Approved for manual loading/unloading operations

Kondisi: diremajakan ulang (bekas), Mesin Hidraulik Satu Tiang (direkondisi sepenuhnya) PYE 250 S1M dengan Bantalan Penarik - Gaya tekan: 2500 kN Djdpfsycl Evjx Aavjkw - Tinggi pemasangan: 800 mm - Langkah: 500 mm - Kecepatan: ke bawah 200 mm/s - Bantalan penarik: 1000 kN, langkah: 200 - Penggerak: 20,5 KW - Dimensi: 3500 x 2000 x 1200 mm dapat dimodifikasi: - kontrol baru, panel kontrol baru, tirai cahaya (1 siklus, 2 siklus, perlindungan), hidraulik baru, - segel baru - inspeksi UVV baru

Kondisi: bekas, Tahun pembuatan: 1981, Technical Details: Pressing force: 30 t Clear width between uprights (WxD): 600/450 mm Installation height, table/ram top: 650 mm Ram stroke: approx. 600 mm / high-speed strokes Table size (LxW): 500 x 700 x Ø 60 mm Clamping surface of ram: 650 x 800 mm Dkodpsu Nfmaofx Aavew Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total connected load: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Four-column press, hydraulic Deburring press Possible application: may be used as a deburring press Additional technical features: - Table opening: 200 x 250 mm - Ram opening: Ø 160 mm - Gap in uprights: width 600 mm, depth 450 mm - Operation via control panel Equipment: - Safety guard - Base plates

Kondisi: bekas, tecdet-press Dkodpfx Aasw Smukjvjw

Tahun pembuatan: 1991, Kondisi: bekas, Pressure 40 t Throat depth 320 mm Stroke 250 mm Throat depth 320 mm Table area 1400x600 mm Dodpfx Aslp U Avoavskw Ram area 1200x600 mm Installation height 650 mm Total power requirement 22 kW Machine weight approx. 8 t Space requirement approx. 3200x3300x3300 mm Pressure- and stroke-dependent cut-off Safety devices for protective and automatic operation Fixed stop Pressure switch Rapid/work cycle Two-hand operation Approved for manual loading operations

Kondisi: baik (bekas), JDS hydraulic press Bed: 505 x 510 mm Dimensions: 140 x 140 x 285 cm (L x W x H) Dodpfxjiki Ahe Aavskw

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 06-26-005, Fungsionalitas: berfungsi sepenuhnya, daya: 17 kW (23,11 hp), tegangan masuk: 400 V, jenis arus masuk: tiga fasa, gaya penekanan: 160 t, panjang langkah: 500 mm, kecepatan operasi: 200 mm/dtk, kecepatan mundur: 125 mm/dtk, lebar meja: 900 mm, panjang meja: 630 mm, kedalaman tenggorokan: 360 mm, lebar pelat tuas: 750 mm, panjang pelat penekan: 450 mm, tabel jarak ke piston: 800 mm, panjang total: 2.200 mm, lebar total: 1.250 mm, tinggi total: 3.500 mm, berat keseluruhan: 7.000 kg, tahun perombakan terakhir: 2026, produsen pengendali: SIEMENS, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, PYE 160 S1/M Hydraulic Single-Column Press Dedozf Ht Sspfx Aavjkw >Completely overhauled / CE marking with  24-month warranty< by the manufacturer ZEULENRODA PRESSTECHNIK Hydraulic press for forming and assembly operations, pressing force 160 t Complete overhaul with CE compliance Ram stroke: 500 mm Clamping plate press table: 900 x 580 mm with customer-specific clamping layout One-piece C-frame in steel welded construction Newly manufactured table and ram plate according to customer requirements! Ram plate, torsion-proof 3-sided safety enclosure: operator side with light curtain, sides with sliding enclosure elements Control system SIEMENS - new Conversion to electronic position measuring system Remote maintenance ----- Additional services for plant retrofit Control / Operation: • Rapid traverse function • USB interface for data exchange • Touch control panel / SIEMENS visualization • Two-hand control unit with dual-channel monitoring of synchronous two-hand operation at the press table (incl. 5m cable) • Limit switches for stroke adjustment replaced by proximity sensors • First-stroke run-down monitoring • Replacement of existing 60 V DC magnets on pilot valves with 24 V DC magnets including required intermediate plates • The press is equipped with an electronic position measuring system (including teach-in function and display of the current ram position). This eliminates the need for a mechanical cam switch. Hydraulic system • Hydraulic safety block for monitoring the closing motion of the main cylinder • Position-monitored directional valve for upward and downward movement of the ram • Replacement of main and pilot pump motors • Replacement of seals on the main cylinder • Fine filter with contamination indicator • All installation and piping works New documentation including CE Declaration of Conformity Delivery time / Implementation period: approx. 5 months

Kondisi: bekas, Tahun pembuatan: 1992, Pressure: 75 t Throat depth: 280 mm Stroke: 303 mm Total power requirement: 15 kW Machine weight approx.: 7,000 kg Space requirement approx.: (dimensions unspecified) Hydraulic single-column press, Type HZS 75 Year of manufacture: 1992 Serial no. H 92-2249 _____ Ram pressing force: 75 t Table size: 750 x 515 mm Table height above floor: 820 mm Through-hole in table: 300 x 200 mm Maximum installation height: 500 mm Throat depth: 280 mm Ram stroke: approx. 303 mm Ram area: 500 x 400 mm Ram bore: 50 mm Main drive: approx. 15 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Total machine height: 3,850 mm Accessories / Special equipment: Dodpet Hwrzofx Aavjkw - DUNKES program control Type PC 10 with data input field for pressure setting, pressure/time switching, top/bottom stroke, rapid traverse and working speeds, including digital display of pressing force, ram travel, pressing time, program number. Storage for up to 30 tool programs, Siemens S5 PLC, teach-in button - Press ram guided over adjustable prism guides - Hydraulic stroke cushioning mounted in the press cylinder, 15 mm - Motorised depth stop and stroke cushioning adjustment - Double sheet detection: Maximum pressing force only after reaching preselected position - Hydraulic tool clamps (4) on the table, hydraulic pin clamping on the ram, hydraulic ejector in the ram, 3 t/15 mm - Safety two-hand control, electrical and stepless return stroke limitation - Overrun monitoring devices NKS, ram switching for the upper piston - Mounted control cabinet, connection for oil cooler, etc.

Kondisi: bekas, Technical Details: Pressing force: 100 t Installation height (table/ram, top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size (L x W x H): 750 x 560 x 90 mm Table opening: Ø 26 mm Ram clamping surface (W x D): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor level: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m Dedpfx Ajvc Ax Njavskw

Kondisi: sangat baik (bekas), de-01 Dkedpfx Aaeyrhmhovow

Kondisi: siap digunakan (bekas), Hydraulische Pressmaschine, Spulenwickel-Pressmaschine, Gebrauchtgerät Abmessungen: 1340 x 1240 x 2740 mm Gewicht: 640 kg Dsdpou Hkfpsfx Aavokw Elektrische Spezifikationen: 400 V Hydraulikdruck: 100 bar Hub: 180 mm

Kondisi: bekas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height (table/ram at top position): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 75 mm Passage in table: Ø 180 mm Clamping surface of ram: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Approx. machine weight: 2.2 t Approx. dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Dodjvc Awxjpfx Aavjkw Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke operation

Kondisi: diremajakan ulang (bekas), Hydraulic press satu tiang (sudah direkondisi total) PYE 160 S1M - Gaya tekan: 1600 kN - Ketinggian pemasangan: 800 mm - Langkah: 500 mm - Kecepatan: ke bawah 200 mm/detik - Bantalan tarik opsional: 630 kN, langkah: 200 mm - Daya penggerak: 17 KW - Dimensi: 3500 x 2000 x 1200 mm Djdpfoycl Hgsx Aavekw - kontrol baru, panel listrik baru, tirai cahaya (1 langkah, 2 langkah, perlindungan), hidrolik baru, - seal baru, pengecatan sesuai permintaan - pemeriksaan UVV baru

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: ST-80, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, panjang langkah: 450 mm, kecepatan operasi: 4 mm/dtk, kecepatan mundur: 5 mm/dtk, lebar meja: 1.000 mm, panjang meja: 1.750 mm, tinggi meja: 800 mm, panjang total: 2.000 mm, lebar total: 1.750 mm, tinggi total: 1.750 mm, berat keseluruhan: 1.700 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, Modelo: ST-80 STANDARD DESCRIPTION: We have designed motorized hydraulic presses with a movable gantry and adjustable ram in the ST series, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large volumes: parts, plates, or structures. It allows access to different pressure points without the need to move the workpiece, thanks to the lateral movement of the cylinder and the longitudinal movement of the gantry. STRUCTURE AND WORKTABLES: The ST series hydraulic presses consist of an electro-welded frame made exclusively of S355JR steel. The frame is stress-relieved and machined at the end of the welding process to ensure perfect parallelism and precision. It is engineered and calculated using finite element method software. With all this, we always guarantee our high standards of accuracy and quality. The gantry features longitudinal movement. CYLINDER AND HYDRAULIC POWER UNIT: Double-acting cylinder with a honed barrel, chromed piston rod, and maintenance-free anti-wear guides. The cylinder is actuated by a lever-operated hydraulic valve. It is equipped with a detachable pad to protect the piston rod from damage. The motorized hydraulic power unit is two-speed, with automatic disengagement of the rapid approach speed by hydraulic pressure and a pressure relief valve. ELECTRICAL INSTALLATION AND SAFETY: The electrical system is equipped with a motor protector and emergency stop. Supplied with a glycerin-filled pressure gauge (reading in tons) and hydraulic oil. Complies with all essential health and safety requirements according to CE standards. Supplied with an instruction manual. MODEL ST-80 Capacity t 80 Motor power kW 3 Working speed mm/s 3.8 Approach speed mm/s -- Return speed mm/s 4.7 Max pressure bar 315 Piston stroke – J mm 450 Lower table mm 1,000 x 1,750 Ram travel – C mm 730 Gantry travel – D mm 1,100 Front opening – A mm 1,050 Vertical opening – B mm 500 Working height – E mm 800 Overall width – G mm 2,000 Dsdpfoz E Hb Hox Aavjkw Overall depth – H mm 1,750 Overall height – I mm 2,250 Weight kg 1,700