Beli Gergaji bundar logam ringan / aluminium – semi otomatis bekas (68)

Kondisi: baru, Tahun pembuatan: 2024, Aluminum Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material processing possible to a limited extent). The machine stands out for its user-friendly operation and quick, convenient material changeover. This machine is designed exclusively for 90° cuts! The saw feed is activated automatically at the push of a button, while the material clamping is achieved via two pneumatically operated vertical and two horizontal clamping cylinders. The standard configuration includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! The machine is equipped with connections for a chip extraction system. Additionally, optional equipment includes a digital mitre angle display, a marking laser, and pneumatic hood lifting. Hfodpjpa Nxdsfx Ag Rjr Equipment - Large support table, powerful drive motor - Two-button control for triggering the saw cut (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be repositioned toward the rear to increase cutting capacity - Large protective hood covering the entire working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable saw blade/feed rate - Air nozzle for machine cleaning - Saw blade diameter 600 mm Working Procedure 1. Set cut angle 2. Insert material 3. Adjust lifting speed 4. Move clamping cylinders to within 20 mm of material 5. Clamp material 6. Press the start button to make the machine ready for operation. 7. Press and hold both SAW buttons to perform the cut. 8. After the cycle, release both SAW buttons and press the STOP button. 9. Open the vice and remove or advance the material. Technical data such as cutting range, motor output, etc. (see data sheet attached to email). Plantec Maschinen GmbH

Kondisi: baik (bekas), Tahun pembuatan: 1997, ALU circular saw semi-automatic, saw blade Ø 350 mm, cutting capacity Ø approx. 125 mm, motor 3.7 / 4.5 kW, 2 speeds 1420/2880 rpm, vertical clamp, stops at 30°, 45°, 60°, 90° on both sides, saw blade included; dimensions 100x115x155 cm, approx. 600 kg Hfodpfx Astqfvysg Rsr

Kondisi: baru, Tubend aluminium circular saw / under-table saw AC 400 Special features included in the price: - Pneumatic vertical and horizontal clamping using 4 clamping brackets - Minimum quantity lubrication system - 3 m roller conveyor Description: Saw blade diameter: 400 x 32 x 4 mm Speed: 3,000 rpm Cutting range at 90° (rectangular): 150 x 100 mm Cutting range at 90° (square): 120 x 120 mm Cutting range at 45° (rectangular): 130 x 80 mm Cutting range at 45° (square): 100 x 100 mm Operating pressure: 6 - 8 bar Operating voltage: 380 V Total power requirement: 1.5 kW Machine weight: approx. 140 kg Hfjdpfx Aekckgvjg Rsr

Kondisi: baru, - Saw blade 400 mm - Double miter - 2 pneumatic clamps Hedogg N Dropfx Ag Refr - Micro-mist lubrication system - Material table with longitudinal stop - Air blow gun - Safety guard - Documentation - 400V

Kondisi: baru, Tahun pembuatan: 2024, The semi-automatic circular saw UK 352 HA is an “upcut” machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials to a certain extent). The machine stands out for its straightforward operation, quick and convenient material change, and easy mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range: left up to 45° and right up to 0°. Saw feed is automatic at the push of a button, and the material is clamped by two pneumatically operated vertical clamping cylinders. As standard, the machine is equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine! The unit is also prepared for connection to a chip extraction system. Equipment: • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right -45º • Including 2 pneumatic vices (vertical) • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction device for chip extraction system • Spray mist system for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged operator panel • Maximum cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our production/showroom. Hjdpfegwt Rvjx Ag Rsfr Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: baru, Tubend aluminium circular saw / under-table saw AC 550 Special features included in the price: - Pneumatic vertical and horizontal clamping by 4 clamping blocks - Infinitely variable saw blade feed - Minimum quantity lubrication - 3 m roller conveyor Description: - Saw blade diameter: 550 x 32 x 4 mm - Speed: 3,580 rpm - Cutting range at 90° (rectangular): 260 x 200 mm - Cutting range at 90° (square): 155 x 155 mm - Cutting range at 45° (rectangular): 180 x 200 mm - Cutting range at 45° (square): 130 x 130 mm - Operating pressure: 6–8 bar - Operating voltage: 380 V Hjdskckx Uopfx Ag Rofr - Total power requirement: 3 kW - Machine weight: approx. 250 kg

Kondisi: baru, TUGRA ALUMINIUM MITRE SAW TYPE AC-450 – Saw blade 450 mm – Double mitre – 4 pneumatic clamps – Misting lubrication system – 1 roller conveyor 300 cm – 1 roller conveyor 300 cm with length stop – Blow gun – Safety guard – Documentation – 400V * See our website for more aluminium mitre saws CALL FOR MORE INFO DUTCHMACH Metalworking Machines ENSCHEDE Hedpfxogg Rb Nj Ag Rsfr

Tahun pembuatan: 2023, Kondisi: baru, The semi-automatic circular saw UK 500 HA is an “upcut” machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its user-friendly operation, quick and convenient material change, and simple mitre angle adjustment. The UK 500 HA features a steplessly adjustable mitre range from left up to 30° and right up to 0°. Saw feed is performed automatically at the push of a button, and material clamping is carried out by two vertically and two horizontally pneumatically operated clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw • Stepless mitre adjustment: 0º / 45º / 90º / -45º / -60º • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop Hfodpegwt R Defx Ag Rsr • Chip extraction device connection • Minimal quantity air-oil mist lubrication system • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically positioned control panel • Maximum cutting height: 180 mm • Saw blade diameter: 500 mm • Saw blade not included in the delivery! You are welcome to inspect the desired unit at any time in our production/demo hall. Please feel free to contact us regarding this.

Kondisi: baru, – Semi-automatic – Saw blade 500 mm – Double mitre – 4 pneumatic clamps – Mist lubrication system Hodpfx Agogg N Sce Refr – 300 cm roller conveyor with length stop – Blow gun – Safety cover – Documentation – 400V

Kondisi: baru, Tahun pembuatan: 2024, Aluminum Circular Saw BC 450 HA, Semi-Automatic (MG FRONT-450) The BC 450 HA is a double mitre saw with a swiveling range of 45° to the left and 22.5° to the right, featuring automatic mitre adjustment via stop functions. The saw feed operates automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety cover. Equipment: - Double mitre saw with high-performance drive motor - Two-button control for initiating the cutting cycle (optionally available with single-button control) - Large mitre range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic mitre adjustment, fixed stop functions at -45° / 90° / +45° and two configurable variable stops for custom angles - Two horizontal pneumatic clamping cylinders - User-friendly control panel - Large safety cover fully encloses the working area, pneumatically lifted - Adjustable saw blade/feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for cleaning the machine - Saw blade ø 450 mm Operating procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the feed speed 4. Move the clamping cylinders up to 20 mm towards the material 5. Clamp the material 6. Activate the START button to make the machine ready for operation 7. Press and hold both SAW buttons to perform the cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Hfjdpfxjpa Nxaj Ag Rjr Plantec Maschinen GmbH

Kondisi: baru, – Semi-automatic – Saw blade 420 mm – Double mitre – 4 pneumatic clamps – Mist lubrication system – 300 cm roller conveyor with length stop Hfodpfxjryp N Rj Ag Rjr – Blow gun – Protective cover – Documentation – 400V

Tahun pembuatan: 2023, Kondisi: baru, The semi-automatic circular saw UK 352 HA is an upcut machine, primarily used for cutting profiles made of aluminum castings, copper, and hard plastics (solid materials possible to a limited extent). The machine is characterized by easy operation, quick and convenient material changes, and simple mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and up to 0° to the right. The saw feed is actuated automatically at the push of a button, and the material is clamped using two pneumatically controlled vertical clamping cylinders. As standard, the machine is equipped with a minimum quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are provided on this machine. Features Hodpegwt Ryefx Ag Rjfr • Precision underfloor circular saw • Mitre adjustment: left 45º / 90º / right -45º degrees • Includes 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Extraction port for chip extraction system • Mist spray unit for air-oil cooling • Air blow gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery!

Kondisi: baru, diameter mata gergaji: 400 mm, - Saw blade 400 mm - Double mitre - 4 pneumatic clamping vices - Automatic protective cover - Misting lubrication system - 1x roller conveyor 300 cm with length stop - Front door for easy saw blade change - Air blow gun Hfodpfx Aswg Sm Asg Rjr - Protective cover - Documentation - 400V

Kondisi: baru, Tahun pembuatan: 2024, Aluminum Circular Saw UK 650 HA, Semi-Automatic The semi-automatic circular saw UK 650 HA is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials possible to a limited extent). The machine stands out for its straightforward handling, quick and convenient material changes, and easy miter angle adjustment. The UK 650 HA offers a continuously adjustable miter range of up to 20° left and right (swivel range of 2 x 70°). Saw feed is automatic at the push of a button, and material clamping is performed by two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air blow gun for cleaning the machine. The machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital miter angle display, a laser marking system, and pneumatic guard lifting. Features: - Double miter adjustment 20° – 90° – 20°, large support table - High-performance drive motor - Two-button control to initiate the cutting process (optional single-button control available) - Clearly arranged control panel - Blade and feed rate adjustable - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic blade lifting with oil level indicator - Fixed material stop can be repositioned to increase cutting capacity - Large safety guard covering the entire working area - Minimum-quantity lubrication system with 2-liter reservoir - Air blow gun for machine cleaning - Saw blade ø 650 mm Working Process: 1. Set the cutting angle 2. Insert the material 3. Adjust the feed speed 4. Move clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to prepare the machine 7. Press and hold both SAW buttons; the material is cut 8. After the cycle, release the SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material You are welcome to visit our production or demonstration hall to inspect the desired system at any time. Please feel free to contact us about this. Hjdpfx Ageidun Ds Rjfr Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2024, The semi-automatic circular saw UK 352 HA is an upcut machine, primarily used for cutting profiles made of cast aluminium, copper, and hard plastics (to a limited extent, solid material). The machine is characterised by its straightforward operation, fast and convenient material changeover, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the push of a button, while material clamping is carried out by two pneumatically operated vertical clamping cylinders. The standard scope of supply includes a minimum quantity lubrication system and an air blow gun for machine cleaning. The machine is also equipped with connections for a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: 45º left / 90º / 45º right • Including 2 pneumatic vertical clamping vices • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction system – compatible with chip extraction units • Spray-mist device for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically positioned control panel • Maximum cutting height: 125 mm • Saw blade diameter: 350 mm Hfjdpegwt Rrjfx Ag Rjr • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our production/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 6 batang, The semi-automatic circular saw UK-600-A is an 'upcut' machine and is primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials possible with certain limitations). The machine is characterized by its straightforward operation, quick and convenient material change, as well as easy miter angle adjustment. The UK-600 A features a steplessly adjustable miter range to the left and right up to 20° (swivel range of two times 70°). Saw feed is automatic at the push of a button; material clamping is achieved by two pneumatically controlled vertical and horizontal clamping cylinders each. The standard equipment for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, the machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic system for lifting the protective hood! Equipment • Precision under-table circular saw • Miter adjustment 0°/45°/90°/-45°/-60° stepless • Incl. 2 pneumatic clamps (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction device—chip extraction system • Spray mist device for air-oil cooling • Air pistol with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included! You are welcome to inspect the desired machine at any time in our production/demo hall. Please feel free to contact us regarding this. Hfsdpjgcbwgsfx Ag Rer Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2023, Bevel adjustment horizontal 15°-90°-15° infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Rear stop travel range 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 x extraction ports (top of hood and bottom). Net weight 600 kg. WxDxH 135x140x150 cm. RAL 9007 grey aluminium. Rotary table made of ground nickel steel. Saw head with ball bearing linear guides, providing high precision, long service life, and high rigidity. Workpiece can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed towards extraction hood. Plantec Maschinen GmbH Hedpfx Ajfv T Aneg Rsfr

Kondisi: baru, Tahun pembuatan: 2024, The semi-automatic circular saw UK-400-A is an "upcut" machine and is primarily used for cutting profile materials made from aluminium castings, copper, and hard plastics (suitable for solid material to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a steplessly adjustable mitre range to both the left and right up to 20° (swivel range of two times 70°). The saw feed is automatic and activated by push button; material clamping is performed by two pneumatically operated vertical and horizontal clamping cylinders each. Standard equipment includes a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are present. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and pneumatic lifting for the safety guard. Features • Precision under-table circular saw • Stepless mitre adjustment: 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic (vertical) clamps • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction system compatible with chip extraction unit • Air-oil mist lubrication system • Air gun with spiral hose Hfedpfxsgwt Rne Ag Rer • Includes maintenance unit with pressure regulator • Ergonomically positioned control panel • Max. cutting height: 130 mm • Saw blade diameter: 400 mm • Saw blade not included! You are welcome to inspect the machine at any time in our production/showroom facility. Please contact us for further information. Plantec Maschinen GmbH