Kondisi: sangat baik (bekas), jam operasional: 2.658 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 71 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 1.620 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 600 kg, arus masuk: 200 A, kapasitas tangki oli: 1.250 l, berat kosong: 29.000 kg, Technical Data – Baler: Manufacturer: BOA Recycling Systems B.V. Model: Impress M75-45-A-5-1.6 Ecoline Year of manufacture: 2021 Operating hours: 2,658 hours (as of May 2024) Number of bales produced: 42,212 units (as of May 2024) Main press force: 71.2 kN (71 t) Specific compaction pressure: 9 kg/cm² Operating pressure: 280 bar Cylinder stroke: 2,200 mm Charge box dimensions: 1,620 x 1,000 mm Filling volume per press cycle: 2.4 m³ Theoretical cycle time: 21 seconds Theoretical throughput: 450 m³/hour Bale dimensions: 1,100 x 720 mm; length adjustable up to 1,400 mm Drive power: 45 kW Connected load: 100 kW Current consumption: 200 A Tying: 5-fold vertical, fully automatic; ram pre-equipped for additional 3-fold horizontal tying Throughput rates at bulk densities of: – 30 kg/m³: approx. 13.6 t/hour – 60 kg/m³: approx. 24.2 t/hour – 100 kg/m³: approx. 36.4 t/hour – 150 kg/m³: approx. 54.7 t/hour Bale weight: up to 600 kg, depending on material Hydraulic oil tank capacity: 1,250 L PLC control: Siemens S7 1500 Operator panel: Siemens SIMATIC HMI TOUCH Transport dimensions (Baler): 10,000 x 2,800 x 3,385 mm (L x W x H) Baler height (assembled with feed chute): 4,743 mm Baler height (assembled with conveyor): 7,123 mm Machine weight (Baler): 29 t Noise level: Iiedpju Thcvjfx Aahsk

Kondisi: baik (bekas), Manufacturer: Comp Model: SB5 Motor: 2.2 kW Piston stroke: 500 mm Iodpfx Aeh Eic Aoaheik Chamber dimensions: 500 x 350 x 400 mm

Kondisi: baik (bekas), Mesin Press Vertikal Dixi 50S PET Tahun pembuatan: 2019-2021 Dimensi balok (P x L x T) (mm): 1200 x 800 x 800 - 1100 Berat balok (kg): sekitar 350-500 kg Data teknis (P x L x T) (mm): 1600 x 1300 x 3100 Lubang pengisian (mm): 1200 x 670 Gaya tekan: 50 ton Iodpfxov Amtko Aahsik Daya listrik: 400 V

Kondisi: bekas, High-Performance Baler MACFAB - BEMA Type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, and secondary raw materials Serial No. MF J0162 Year of manufacture: 2021 Pressing force: 50 tons Press plate stroke: approx. 1000 mm Cycle time per stroke: approx. 40 sec. Press chamber base area: 1500 x 1100 mm Press chamber height: 1650 mm Filling opening: 1500 x 870 mm Filling height: approx. 1250 mm Bale size: 1500 x 1100 mm Bale height: max. 1100 mm Iijdovq Rtkopfx Aahok Hydraulic operating pressure: 200 bar Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz, 12 Amp. - Equipped with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Press operation possible only when press chamber door is closed - Two-hand control for hydraulic ejection of finished bale - Clearances for manual strapping - Produces standard industrial bales of 1500 x 1100 x 1100 mm - The highly compacted bale is automatically tilted onto a pallet - Only 62 operating hours Installation dimensions (L x W x H): 2120 x 1350 x 3220 mm Transport height with retracted hydraulic cylinders: approx. 260 cm Weight: 1.8 tons The machine is in excellent, as-new condition. The new price for this press from BEMA is EUR 22,200 net. BEMA also purchases packaging waste that you bale with this press.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W230-028, gaya penekanan: 80 t, masa garansi: 24 bulan, tekanan: 250 batang, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The machine in question is an HBC80 baler (45kW) with vertical tying. This baler has been completely refurbished in our dedicated refurbishment workshop. The refurbishment has been performed in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Following refurbishment, this baler is sold with a 2-year warranty included. Iisdpfxjtvat Tj Aahjk The press is supplied with the following options: * support frames, * intermediate hopper, * bale exit chute, * wire spool platforms.

Kondisi: bekas, Horizontaler hydraulischer Behälter-Zerkleinerer Iedpfx Aajpyncaehjik

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. Iiodevf E Avspfx Aahjk - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baik (bekas), Manufacturer: MBT Type: MV-250 S Ijdpfxehzr U Io Aahjik Motor: 5.5 kW Hopper size: 780 x 600 mm Housing dimensions: 3500 x 1000 x 2200 mm

Kondisi: baik (bekas), HSM 155.1 VL baler Pressing force: 18 tons Specific pressure: 2.33 kg/cm² Theoretical performance: 3 bales/h, i.e. approx. 500 kg/h Bale dimensions: 1100 x 700 x 800 mm Isdpfx Ajv Alacsaheik Bale weight: 150–250 kg Power supply: 400 V / 4 kW

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 71 t, lebar bukaan pengisian: 1.080 mm, panjang bukaan pengisian: 1.620 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 600 kg, lebar total: 3.450 mm, tinggi total: 4.090 mm, panjang total: 10.020 mm, tegangan masuk: 400 V, berat keseluruhan: 27.000 kg, tingkat kebisingan: 85 dB, tekanan: 300 batang, tinggi transportasi: 2.300 mm, daya: 37 kW (50,31 hp), nl-hu-001 Iiodpfxjxl Rqbs Aahok

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HBC 140 2x75kW 2001 (210-008-01), gaya penekanan: 155 t, berat bal: 1.500 kg, tekanan: 250 batang, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, Verkocht door Bollegraaf Recycling Solutions, de oorspronkelijke fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-rattenbekabeling 0 uur na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit bevat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Iodpfxstvau Ae Aaheik Toleranties Na de demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende onderdelen: • Persplunjer • Frame • Kanaal • Voordruk-klep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventueel las- en herstelwerk worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen en slangen worden vervangen. De hydraulische componenten worden gereviseerd. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en teruggeplaatst op eenvoudig toegankelijke posities. Slijtagedelen: Alle slijtagedelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtagedelen van (beide) naaldinstallaties en knopers worden vervangen. Cilinders: De cilinders worden gereviseerd en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (‘human interface’) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Presto HAN10 Usable volume: 10 m³ Filling opening: 1300 x 1500 mm Iijdjd Hy Enopfx Aahjk Machines are refurbished, serviced, inspected, and repainted in a standard RAL color before sale. NEW: Polyamide, hydraulic hoses, oil & filter Images are reference photos of machines we've manufactured. We are happy to provide you with an offer including delivery.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat keseluruhan: 9.500 kg, lebar bukaan pengisian: 420 mm, panjang bukaan pengisian: 1.250 mm, Technical Data – Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Iiedpfou Th S Sox Aahsk Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Feed opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput capacity for empty beverage cans with: • One press stroke: approx. 1.7 t/h • Two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions assembled: 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant S355 steel Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel plate, as well as aluminum, brass and copper scrap. Condition of baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic wiring diagram). Inspection by appointment is possible. We assume no liability for technical data or possible errors.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Amis ZBP 50 S Duo sawdust briquetting machine Isdpfsumwm Ssx Aahsik Year of manufacture: 2019 Load capacity depending on material: up to 140 kg 3,800 operating hours Briquette diameter: 50 mm Tank capacity: 1.2 m³ Roller with feeder Pre-pressing Screw conveyor Hydraulic pump motors, each 7.5 kW Fan cooling Sawdust level sensor in the tank Hydraulic oil tank: 100 l SIEMENS control system Dimensions (L x W x H): 3,000 x 2,400 x 1,700 mm Weight: 2,000 kg Price of new machine: 39,800 EUR

Kondisi: sangat baik (bekas), Technical data: Pressing force: 178 kN Drive power: 4 kW Iedpfx Asv Akmzjahjik Cycle time: 23 s Loading height: 928 mm Loading aperture width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold strapping with polyester tape Year of manufacture: 2010-2013

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Mesin press kertas/limbah JONGEJANS model: DBF145_00_h00004 Jumlah filter: 84 Felt jarum poliester Isdpfsxk N Dwex Aahoik Luas permukaan filter: 145 m² Komponen yang terpasang: Mesin press briket CS3-12 Kipas pembersih 1,5 kW

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, jam operasional: 23.000 h, nomor mesin/kendaraan: 00834, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.315 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, masa garansi: 3 bulan, daya: 30 kW (40,79 hp), tahun perombakan terakhir: 2025, Perlengkapan: dokumentasi / manual, de Iijdpjxck U Uofx Aahjk

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2019, Presto HAN10R Kontainer press untuk arm roll Volume efektif 10 m³ Pintu pengosongan terpasang di bagian atas Iisdpfx Aow Uqngoahek Tutup dua bagian di atas lubang pengisian, dapat dibuka kiri/kanan Persiapan untuk pengoperasian dengan ramp Mesin-mesin direkondisi, dirawat, diuji, dan dicat ulang dengan warna standar RAL sebelum dijual. Gambar adalah gambar referensi dari mesin tipe yang sama hasil produksi kami. Kami siap membuat penawaran termasuk pengiriman.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Technical Data for EPS (Styrofoam) Compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of Manufacture: 12/2022 Drive Power (Shredder): 4 kW Drive Power (Compacting Screw): 7.5 kW Drive Power (Hydraulic Unit for Retaining Clamp in Press Channel): 1.1 kW Total Connected Load: 12.6 kW Power Requirement: 32 A Compression Ratio of Compacted Blocks to Original Material: approx. 50:1 (depending on material) Block Weight After Compaction: approx. 300 kg/m³ (material dependent) Block Dimensions: 320 x 320 mm, length variable Isdpfxsu Thkae Aaheik Throughput Capacity: approx. 100 kg/hour (depending on material) Achievable Density: approx. 250 – 300 kg/m³ Compacted blocks are stacked approx. 1400 mm high on a pallet and wrapped with stretch film. Machine Dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport Weight (Compactor): 1,325 kg Condition of the Compactor: The compactor was only used sporadically, is in very good condition, and available at short notice. Due to the low machine weight and forklift pockets in the transport frame, the machine is mobile and can be used directly at the material source, e.g., on the construction site. Electrical connection is via a CEE 32 A plug. Scope of Delivery: 1 piece EPS compactor, ready for connection and operation. Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 25 t, lebar bukaan pengisian: 800 mm, panjang bukaan pengisian: 1.050 mm, lebar bal: 900 mm, tinggi bal: 800 mm, tegangan masuk: 400 V, tingkat kebisingan: 85 dB, daya: 18,5 kW (25,15 hp), laju aliran volumetrik: 160 m³/jam, Bollegraaf HBK25 ditawarkan di Siprus. Mesin dalam kondisi baik dan termasuk konveyor pada lantai. Tersedia segera. Iodpsxbdgujfx Aahoik Data teknis mesin baler: Penggerak: 18,5 kW Ukuran bal: 800 x 900 x dapat diatur Ukuran hopper: 1.050 x 800 mm Gaya tekan: 25 ton Kapasitas: 160 m3/jam (tergantung material) Data teknis konveyor (perkiraan): Panjang di lantai: 3.000 mm Panjang diagonal: 5.000 mm

Kondisi: baik (bekas), - Lubang pengisian besar, ideal untuk kotak berukuran besar - Dump truck kontainer untuk pengisian yang nyaman Gaya dalam kN: 400 Panjang bal: 1.100 mm Lebar bal: 750 mm Tinggi bal: 750 mm Panjang mesin press: 5.640 mm Lebar mesin press: 1.674 mm Tinggi mesin press: 2.500 mm Berat: 4.450 kg - Daya motor dalam kW: 9 - Tegangan/frekuensi: 3 x 400 V / 50 Hz - Berat bal dalam kg (tergantung material): hingga 350 kg - Pengikatan manual: 3 kali dengan kawat Tahun pembuatan: 2013 Mesin press baling HSM HL 4010 LI - Lubang pengisian besar, ideal untuk kotak berukuran besar - Dump truck kontainer untuk pengisian yang nyaman Gaya dalam kN: 400 - Daya motor dalam kW: 9,5 - Tegangan/frekuensi: 3 x 400 V / 50 Hz - Berat bal dalam kg (tergantung material): hingga 350 kg - Pengikatan manual: 3 kali dengan kawat Tahun pembuatan: 2012 Iiodpfsv Amv Eex Aahsk

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 24.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 004283-0030, gaya penekanan: 122 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, masa garansi: 24 bulan, tahun perombakan terakhir: 2026, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered by Bollegraaf Recycling Solutions. This listing concerns an HBC120s baler (90kW) equipped with, among other features, cross-tying (5 wires vertical & 5 wires horizontal). This baler is currently undergoing a complete refurbishment in our overhaul workshop. The refurbishment is carried out in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Iijdpfx Asxcir Ejahok After refurbishment, this baler will be sold with two years warranty included. Technical Specifications, type HBC120S Volume capacity (m3/h) - max.: 815 / 660 / 500 Bulk density (kg/m3) - max.: 20 / 50 / 100 Throughput capacity (T/h) - max.: 16.3 / 33 / 50 The above-mentioned capacities apply only if the machine is used correctly and is continuously and adequately fed with suitable material for at least one hour. Bale weight: approx. 1470 kg (depending on, among others, the type of material and length of bale) Bale length: variable / adjustable Bale height: 1100 mm Bale width: 1100 mm Hopper dimensions: 1100 mm x 1600 mm (these dimensions also determine the size of material that can be processed by the machine). Ram pressure force: max. 119.7 tons Pre-press flap pressure force: max. 65 tons Cycle time, excl. wire tying: 19 seconds Main drive motor: 90 kW (120 HP) Twistomat (knotter) motor: 1.5 kW, SEW Counter pressure pump motor: 1.1 kW (2 HP) Needle installation motor: 7.5 kW, SEW Oil cooler fan motor: 3 kW (4 HP) Pump for oil cooling motor: 4 kW (5.5 HP) Operating pressure: 315 bar Machine weight: approx. 40,040 kg Number of wires: - 5 vertical - 5 horizontal Oil volume: 1,655 liters Oil brand and type: BP-SHF-46 Color: - baler: RAL 6024 (green) - safety doors: RAL 1021 (cadmium yellow) Baler dimensions: - length: 11,765 mm - width: 2,500 mm - height: 7,104 mm

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 54.050 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, kapasitas tangki oli: 2.100 l, daya: 94 kW (127,80 hp), berat kosong: 21.000 kg, Technical Data – Baler: Manufacturer: Paal Model: Konti 275 E Year of manufacture: 2006 Total operating hours: 54,050 hours Main press force: 80 t at 300 bar Specific press force: 9.7 kg/cm² Feeding chute dimensions: 1,600 x 1,020 mm (L x W) Throughput under operating conditions: 350 m³/h Iedpfxexcxm Es Aaheik Bale dimensions: 750 x 1,100 mm, length variable Drive power: 75 kW Total connected load: 94 kW Rated current: 180 A Tying system: 4-fold vertical, fully automatic Bale weights: up to 750 kg, depending on material Hydraulic oil tank volume: 2,100 L PLC (Make/Type): Siemens Simatic S7-300 Control panel (Make/Type): Siemens Multi Panel Transport dimensions press only: 11,152 x 2,152 x 3,000 mm (L x W x H) Press weight approx.: 21 t Condition of baler with conveyor: The baler and conveyor are in a satisfactory, operational condition, see photo documentation. Further technical data and dimensions for the conveyor are currently not available. The plant is currently still in operation and will be replaced in the coming months by a larger baling system. Scope of supply: Baler, bale slide, conveyor belt and machine documentation. Remarks: The documentation (operating manual, CE, electric/hydraulic circuit diagrams) is complete. An inspection is possible by arrangement. Dismantling and loading is the responsibility of the buyer. We do not accept liability for the technical data or for possible errors.

Kondisi: baik (bekas), Tahun pembuatan: 2012, jam operasional: 12.078 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 88 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 30.000 kg, kapasitas tangki oli: 2.000 l, daya: 98 kW (133,24 hp), laju aliran volumetrik: 643 m³/jam, en-001 Iijdpexcngnefx Aahek

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 5.612 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 550 kg, tinggi total: 2.800 mm, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.800 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), berat kosong: 12.000 kg, laju aliran volumetrik: 332 m³/jam, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Iiodpovtpq Hsfx Aahek Type: VK 4812 Year of manufacture: 2014 Operating hours: 5,612 hours as of August 2025 Main press force: 48 t Specific pressing force: 58.2 N/cm² Feed chute dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 sec Theoretical throughput: 332 m³/h Bale dimensions: 1,100 x 750 x 600 up to 1,200 mm Drive motor power: 30 kW Total connected load: 32 kW Rated current: 59 A Tying: 4-fold horizontal, fully automatic Throughput at bulk density of 20 kg/m³: up to 6 t/h, depending on material Bulk density of 50 kg/m³: up to 13 t/h, depending on material Bale weights: up to 550 kg, depending on material PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI touch panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Installation dimensions with bale slide: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions (baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine weight (baler) approx. 12 t Scope of delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire spool boxes for 8 pieces of 40 kg wire spools, without wire - Bale slide - Machine documentation in German Comments: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left-hand side in pressing direction; the needle unit is located on the right and can be folded back for transport. The baler has been partly overhauled and tested in our workshop; see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Inspection possible by appointment. We do not accept liability for the technical specifications or possible errors.