Beli Mesin penggulung ulir bekas (55)

Kondisi: bekas, Tahun pembuatan: 1997, nomor mesin/kendaraan: 707, Ingramatic thread rolling machine RP21 RV, year 1997, used Dksdpfewiu Afsx Aavjw

Kondisi: bekas, Tahun pembuatan: 2007, Brand: ORT Model: RP18 Year: 2007 Maximum rolling force: 18 tons Roller shaft diameter: 54 mm Roller shaft key width: 12 mm Minimum workpiece diameter: 3 mm Maximum workpiece diameter: 60 mm Djdpfx Aasv Tqdbovskw Maximum plunge rolling length: 175 mm Maximum through-feed rolling length: — Maximum workpiece pitch: 4 mm Minimum roller diameter: 140 mm Maximum roller diameter: 185 mm Main motor power: 7.5 HP Total installed power: 11 HP Maximum noise level: 80 dB Net weight: 1,800 kg Rolling shaft height from floor: 1,035 mm Machine width: 1,450 mm Standard machine depth: 900 mm Total machine height: 1,800 mm

Kondisi: baik (bekas), Tahun pembuatan: 1998, panjang ulir: 65 mm, de-to-hu+it+lt_001 Dodpfex H Rmuox Aavokw

Kondisi: bekas, Mesin penggulung ulir UPWS 25 Dkedpjzd Rf Nofx Aavew

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base Djdpfouz If Nsx Aavekw - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: sangat baik (bekas), diameter benda kerja (maks.): 30 mm, diameter spindel: 54 mm, diameter rol: 125 mm, kecepatan spindel (maks.): 224 rpm, kecepatan spindel (min.): 40 rpm, lebar rol: 70 mm, Profiroll Bad Duben bekas pakai, model UPWS 10 ton, Mesin Roll Ulir Hidrolik dengan poros berputar untuk proses rolling in-feed dan thru-feed. Dodpjymlx Djfx Aavekw Diameter rolling maksimum: 30mm - Panjang ulir maksimum (in-feed): 70mm - Panjang ulir maksimum (thru-feed): tak terbatas Diameter spindle rolling: 54mm - Ukuran maksimum die ulir: diameter 125mm x lebar 70mm - 4 kecepatan spindle, 40 hingga 224 rpm.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, BAD DUBEN Modello PRX 32 E - CNC Usata - in ottime condizioni Bad Duben: Rullatrice filettatrice cilindrica a 2 matrici Marca: BAD DUBEN Modello: PRX 32 E - CNC Tipologia: Macchine filettatrici, rullatrici filettatrici, a matrici cilindriche Condizioni: Usata, in ottime condizioni N. di serie: 17 Anno: 1995 Pressione max di rullatura: 16 T Diametro pezzo lavorabile: 6 - 24 mm Lunghezza filettatura: 200 mm Diametro rulli: 195 mm Passo massimo: 3 mm Gamma velocità mandrini rulli: 40-315 Diametro matrice: 210 mm Dksdpfx Aov Imqyjavsw Peso: 4.500 kg Visibile presso H.B.R. srl - Calolziocorte (LC) - Italia

Kondisi: bekas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] Dkjdpouhb Uhofx Aavjw - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Kondisi: bekas, ORT LE60 2-roll Rollier-Läppmaschine (burnishing) Die Maschine ist in unserem Lager, unter Strom. Probelauf moeglich. Wir koennen "know-how" geben. Mimu Werkzeugmaschinen Dkodpfx Aaszbx Dcovew

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang ulir: 350 mm, diameter benda kerja (maks.): 30 mm, Mesin pembentuk ulir FETTE, Tipe: R30, tanpa kepala. Kepala pembentuk ulir dari M6 hingga M30 – M42* dapat digunakan. Rentang pembentukan ulir bergantung pada kepala yang digunakan. Dkedpfozmpbuex Aavew Panjang ulir maksimum: 360 mm 6 kecepatan putaran spindel: 500–4800 RPM Penjepit hidraulik Operasi otomatis dimungkinkan. Berat kira-kira: 850 + 150 kg

Kondisi: bekas, Tahun pembuatan: 2001, CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Druck 0,2-40 t Werkstückdurchmesser - max. 70 mm Gewindelänge 120 mm Steuerung Gesamtleistungsbedarf 29 kW Maschinengewicht ca. 9,5 t Raumbedarf ca. m Angebot Wir freuen uns, Ihnen aus unserem Lagerbestand anbieten zu können, vorbehaltlich vorherigen Verkaufs und Fehler in den technischen Daten: PROFIROLL - BAD DÜBEN (Deutschland) CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Modell ROLLEX Jahr 2001 Walzkraft stufenlos einstellbar 0,2 - 40 Tonnen Walzspindel-Ø 120 mm Werkstück-Ø, max. (ungefähr) 70 mm Spindelantrieb je ca. 8,5 kW Gesamtstromaufnahme ca. 29 kW - 400 V - 50 Hz Gewicht ca. 9.500 kg Zubehör / Besondere Merkmale Die Maschine ist mit einem modernen CNC-Steuerungssystem ausgestattet, das vom Hersteller entwickelt wurde. Mit Eingabe aller relevanten Prozessdaten und Werkstückdaten, um die Maschine einfach und schnell für andere Werkstückgrößen einzustellen (Umrüstzeit). Alle Prozessparameter werden grafisch auf dem Monitor dargestellt und bieten dem Benutzer einen optimierten Prozesszyklus. Aufgesetzte (Werkstück-) Zentrumswalzvorrichtung für wellenförmige Werkstücke (wie Getriebewellen) mit Mittellöchern, mit einer Spannvorrichtung, mit prismatischen Vorhaltern zur Positionierung des Werkstücks vor dem Spannen und mit einem motorisierten (angetriebenen) Reitstockzentrum auf der Vorderseite des Werkstücks. Der Hub des Werkstückschlittens beträgt ca. 500 mm - das Werkstück wird also geklemmt und hydraulisch zwischen den beiden Walzwerkzeugen bewegt. Kühlgerät für das Hydrauliköl, separater Schaltschrank, CNC-Bedienfeld usw. Durchsichtige Sicherheitsabdeckungen im Arbeitsbereich. Zentralschmierung. English translation: CNC Thread, Gear and Profile Rolling Machine Pressing force: 0.2 - 40 t Workpiece diameter - max. 70 mm Thread length: 120 mm CNC control Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. ... m OFFER We are pleased to offer you the following item from our stock, subject to prior sale and errors in technical data: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force infinitely adjustable: 0.2 - 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive (each): approx. 8.5 kW Total electrical load: approx. 29 kW, 400 V, 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: * The machine is equipped with a modern CNC control system developed by the manufacturer. Entry of all relevant process data and workpiece data allows easy and quick retooling for different workpiece sizes (short changeover time). All process parameters are graphically displayed on the monitor and provide the user with an optimized process cycle. * Integrated (workpiece) center rolling device for shaft-type workpieces (such as gear shafts) with center holes, featuring a clamping device and prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the front of the workpiece. Dsdot Hw N Tspfx Aavekw The stroke of the workpiece slide is approx. 500 mm; the workpiece is clamped and hydraulically moved between the two rolling tools. * Cooling unit for the hydraulic oil, separate control cabinet, CNC control panel, etc. * Transparent safety covers in the working area. Centralized lubrication system.

Kondisi: bekas, TECHNICAL DATA - Max. piece length: 1350 mm - Max. tooth length: 1200 mm Dksdpfx Asuhb Unjavew - Max. tooth diameter: 120 mm - Power: 18.5 kW - Machine dimensions: 2840 x 1700 x 1420 mm

Kondisi: diremaj di bengkel (bekas), diameter benda kerja (maks.): 60 mm, diameter rol: 185 mm, lebar rol: 150 mm, Satu unit – Mesin Pengerol Ulir Hidraulik Model RP18 – 18 ton yang telah diperbaiki, dengan spindel pengerol tetap untuk pengerolan umpan masuk atau pengerolan umpan lanjut dengan cetakan umpan lanjut heliks. Termasuk spindel pengerol baru, bantalan baru, dan roda gigi serta poros cacing baru, dll. Diameter pengerolan maksimum: 60 mm – Lebar pengerolan maksimum dengan cetakan umpan masuk: 150 mm – Lebar pengerolan maksimum dengan cetakan umpan lanjut: tidak terbatas. Diameter spindel: 69,85 mm & 80 mm – Daya motor utama: 7,5 kW Dilengkapi dengan satu pasang selongsong spindel 69,85 mm (diameter dalam) x 80 mm (diameter luar) & 17 set cetakan ulir lebar 60 mm, 120 mm & 180 mm, mulai dari M6 hingga M24. Dedpfxsyml Eke Aavskw Foto-foto diambil sebelum proses perbaikan.

Tahun pembuatan: 1989, Kondisi: sangat baik (bekas), Capacity (mm): M8x60/80 Dkjdpjliqf Nsfx Aavsw Maximum Output: 300 ppm Year: 1989

Kondisi: bekas, ORT 3RP10 3 Roll Gewindewalzmaschine Dksdpezbx D Nsfx Aavew

Kondisi: diremajakan ulang (bekas), Sedang dalam proses rekondisi, dapat disesuaikan sesuai kebutuhan. Ingramatic RP1 Panjang die tetap: 85 mm. Panjang die bergerak: 95 mm. Tebal die: 25 mm. Tinggi die: 65 mm. Diameter ulir: M2 ÷ M6 Panjang shank: 100 mm. Dodpfozcd Hfjx Aavskw Panjang ulir: 62,5 mm. Kisaran kecepatan hingga: 600 pcs/menit.

Kondisi: bekas, Tahun pembuatan: 1991, Workpiece diameter 30 mm Thread length 110 mm Thread pitch 0.5-2.75 mm/rev Total power requirement 4.5 kW Machine weight approx. 1.7 t Djdpfot Hwzcsx Aavjkw Space requirement approx. m M O N N I E R & ZAHNER Switzerland Thread whirling machine with workpiece loading system Type MZ 600, year of manufacture approx. 1991, #3591 _____ Max. workpiece diameter approx. 30 mm Max. workpiece length approx. 110 mm Axial milling length approx. 100 mm Module in steel approx. 1 Worm starts 1 Axis distance tool-workpiece min./max. 0 - 70 mm Whirling head swiveling +/- 12° Tool size approx. 70 x 16 mm Whirling head speeds approx. 1,000 - 6,000 rpm Pitch range approx. 0.5 - 2.75 mm/rev Whirling head drive approx. 1.5 kW Total drive approx. 4.5 kW - 220 V/380 V / 50 Hz Weight approx. 1,700 kg Accessories / Special Equipment: Machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a vibratory bowl feeder from Rübenach with pneumatic swing gripper for inserting the blanks, as well as a tailstock (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew while the cross slide sets the thread depth. Copying unit at the end of the cross slide with template holder for tapered screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electrical program control with display of movement sequence. Error display, workpiece counter, oil mist extraction, coolant system, etc.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Djdpfx Aaeh A S Htjvskw Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Kondisi: bekas, Thread rolling machine, thread rolling head, segment thread rolling machine, cold forming machine, thread rolling head, rolling head Dksdpfeu Tyvhsx Aavjw - Manufacturer: BWF, thread rolling head - Model: RK 12-20 - Thread rolls: M24 x 1.5 - Dimensions: Ø 120 x 180 mm - Weight: 5.6 kg

Kondisi: bekas, THREAD ROLLING MACHINES Dsdpfx Aajig Txmevokw VEB WMW GWR 80GR WITH EXTENSIVE TOOLING

Kondisi: baik (bekas), Rolling pressure: 220 kN Workpiece diameter: 3 mm min; 70 mm max Pitch: 6 mm max Knurling pitch: 2.25 mm max Roller width: 160 mm max Roller diameter: 133 mm min; 170 mm max Roller shaft speed: 24, 30, 38, 45, 62, 72, 90, 114 rpm Roller shaft diameter: 54 mm standard; 69.85 mm special Distance between shafts: 135 mm min; 230 mm max Working stroke: 15 mm max Feed rate: from 0.5 mm/s up to 6 mm/s Rolling time: from 0.1 s up to 100 s Pause time: from 0.1 s up to 100 s Dsdpfx Aaevyyyxevjkw Main motor: 5.5 kW Electrical power consumption: 8.6 kW Tank capacity: 130 L Approx. weight: 2100 kg

Kondisi: bekas, 1 Dkjdsyvk S Aspfx Aavjw

Kondisi: baik (bekas), de-DE Dksdjhtal Rjpfx Aavsw Maximaler Durchmesser: M6 Maximale Gewindelänge: 42 mm Maximale Stablänge: 75 mm Baujahr: 80er Jahre

Kondisi: bekas, Gewinderollmaschine ORT RP30U Dkodpjt H Ty Ujfx Aavew

Kondisi: baik (bekas), Ingramatic RP1 Diameter maksimum: M6 Panjang ulir maksimum: 42 mm Panjang poros maksimum: 75 mm Tahun pembuatan: Tahun 1980-an Dkodpfx Aashrdnksvsw