Beli mesin frais portal bekas (150)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 55.000 h, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 6.000 rpm, daya motor spindle: 36.000 W, produsen pengendali: SIEMENS, model controller: Sinumerik 840 D, jumlah sumbu: 3, This 3-axis gantry milling machine, the Unisign Uniport 6000, was manufactured in 2010. It offers an impressive X-axis travel distance of 10,000 mm, a Y-axis travel of 1,500 mm, and a Z-axis travel of 1,000 mm. The machine features a powerful 36 kW main drive and an automatic tool changer with 30 positions. If you are looking for a high-quality milling machine, you should consider the Unisign Uniport 6000 gantry milling machine we are offering for sale. Please contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Maximum torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): Drilling Ø 120 mm / Tapping M55 / Milling 100 cm³/min • Design: gantry construction with movable bridge and stationary clamping table • Table configuration: clamping rails crosswise at 750 mm intervals (standard platen panels omitted) • Tool changer: automatic tool change; 30-position chain magazine on the portal column (tool change into angle head possible) • Operation mode: pendulum machining possible • Cooling: machine cooling system; water-air heat exchanger integrated in the control cabinet • Coolant system: dry machining; pre-installed/prepared for coolant use • Maintenance condition: tool magazine and X1/X2 ball screws completely overhauled in 2023; last OEM service in 2023 • Installation: machine recessed and anchored in a foundation pit Dsdjy A Ifmspfx Agqekw Additional Equipment • Angular drilling and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare probe Hexagon RWP 20.50-M • Hydraulic clamping device with clamping bridges for axle machining, including hydraulic power unit • 1x T-slot clamping plate (2500 x 1200 mm) as alternative to hydraulic device • Swarf conveyor: hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Partition wall with inspection window • Set-up and leveling elements • Various spare parts • Including documentation Technical Specification Taper size: SK 50

Kondisi: bekas, Tahun pembuatan: 1991, MK-20240628-001 Dkjdpfxsyqvdro Agqow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 760 mm, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 26.000 kg, berat alat: 15.000 g, daya motor spindle: 30.000 W, produsen pengendali: FANUC, model controller: Series 18i-MB, jumlah sumbu: 4, This 4-axis EDEL Koordimatic XL 4020 portal milling machine was manufactured in 2003. It features a large working area of 4000 x 2000 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a powerful 30 kW electrospindle and offers a Z-axis travel of 760 mm. If you are searching for a high-quality milling machine, consider the EDEL Koordimatic XL 4020 now available for sale. Contact us for further details. • Condition: Refurbished (used) • Functionality: Limited functionality • Power: 30 kW (40.79 HP); electrospindle fully overhauled (new bearings and clamping system) • Working area: 4000 x 2000 mm • Rapid traverse (X/Y/Z): 20 / 20 / 15 m/min • Rotational speed (max): 300 rpm • Tool magazine: 36 positions (damaged – no changer arm) • Distance from table to spindle center: 150 mm • Tool holder diameter: 50 mm Dsdpfx Ageyw Nppsqskw Technical Specification Taper Size: SK 50

Kondisi: diremajakan ulang (bekas), I.M.M.U. BONARDI PLANFRÄSMASCHINE Dkeded Avz Iopfx Agqsw - ABSTAND ZWISCHEN DEN STÄNDERN: 1.220 mm - LÄNGE: 4.000 mm - HÖHE: 950 mm

Kondisi: baru, Tahun pembuatan: 2025, jarak pergerakan sumbu X: 390 mm, jarak lintasan sumbu Y: 230 mm, jarak gerak sumbu Z: 300 mm, kecepatan spindel (min.): 2.000 rpm, kecepatan spindel (maks.): 24.000 rpm, berat keseluruhan: 450 kg, diameter alat: 14 mm, masa garansi: 24 bulan, daya: 2 kW (2,72 hp), If you are looking for a genuine milling and engraving machine that offers strong, reliable milling performance—a real machining tool and not a toy—then you are exactly in the right place: immediately ready for use for engraving, milling, and drilling, ideally suited for efficient machining of plastics and light metals. CNC DIN ISO G-Code milling machine including user-friendly CNC control Work area: with T-slotted table X=390 mm Y=230 mm Z=300 mm Base frame of the milling machine made from cast iron, approx. 280 kg Including base cabinet for required machine assembly components such as cooling, power supplies/inverter, and control unit, approx. 170 kg All axes equipped with ball screw drives and 25 mm linear guides Includes dust protection and manual central lubrication for all axes Axes drive monitored by encoders! High-frequency spindle up to 24,000 rpm, 2 kW, water-cooled ER20 collet up to max. 14 mm milling tools - Optional: G-code controlled minimum-quantity lubrication - Optional: G-code controlled dust extraction - Optional: G-code controlled vacuum table solution (*Price subject to configuration, control system, and spindle; this is a brand-new machine manufactured by us) Milling machines are manufactured 100% in our factory in Plauen according to customer requirements! Images show various equipment options; you will receive a brand-new milling machine built in-house. Technical specifications: · Drive system: high-precision ball screw · Working speed: max. 6,000 mm/min · X-Y-Z working/travel range: 390 mm x 230 mm x 300 mm · Clearance height: 300 mm · X-Y-Z incremental step: 0.01 mm/step · X-Y-Z repeat accuracy: 0.02 mm · File formats: G-code, ISO data · HF milling spindle: 2.2 kW, water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm · Tool holder: ER20 Dksdpfx Agsi Hb I Tsqow · Power supply: AC 240V, 50 Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 4.486 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.360 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan rotasi (maks.): 18.000 rpm, model controller: Fidia C20 mit Bedienteil HPX, 1 Dodpfx Ageywgyrsqokw

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 2021, 3D AC SERVO SkyCNC WK Series CNC Milling Machine - 2050 mm x 3050 mm x 220 mm High-Precision – Milling and Drilling at Extremely High Speed and Quality. As a CNC milling machine manufacturer, pfeifer-technology with its skycnc CNC milling and engraving machines is your trusted partner. Our PFEIFER technology skycnc WK series CNC milling machines, featuring high-precision ball screw drives on all axes, deliver maximum precision, accuracy, and speed – all at an attractive price-performance ratio. The rigid construction with an ultra-heavy steel base frame (approx. 4 tons) ensures high static rigidity, allowing for trouble-free machining of solid woods and various metals. The sophisticated positioning and distribution of the 35 mm linear guides and rails, combined with the massive portal’s vibration-damping characteristics, make our CNC milling machines stand out. Dkodpfx Agebnpgxjqjw All machine components and servo drive units are the result of years of development and experience. The powerful servo motors are highly efficient and backlash-free, directly coupled to German-quality ball screws, offering a feedback-free drive to meet the highest demands. The advanced, freely programmable CNC control system allows for flexible operation via touchscreen in any production environment and comes standard with our PFEIFER technology skycnc WK series milling machines. With this CNC control, you can generate your milling data or import CAD/CAM data for independent processing – even without a separate computer. The tool changer (up to 16 tools), full aluminum vacuum table, various tool and workpiece cooling solutions, automatic lubrication on all axes, and other sophisticated features complete this milling system. With the PFEIFER technology skycnc WK series, you get a reliable and powerful large-format gantry milling system for your applications. On request, we supply the corresponding CAD/CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems, or ArtCAM Pro / ArtCAM Insignia software in German/Russian, etc., upon request. - Drive system: high-precision ball screw drive on X, Y, and Z axes from high-precision German manufacture - Working speed: 15 m/min - XYZ working/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with integrated vacuum channels): 2000 x 3000 x 30 mm - XYZ repeatability: 0.02 mm - XYZ accuracy: 0.01 mm - Compatible with software: Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - File formats: ISO standard G-code, FANUC-compatible - Options: Spindle motor/tool changer/vacuum table to customer specifications - Warranty: 1 year - Spindle power: from 5.5 kW (other power ratings optional) - Spindle speed: 6,000 – 24,000 rpm (depending on requirements) - Spindle holder: BT30 / ER20 (other holders optional) - Drive: AC SERVO motors on all axes - Tool changer: 4–8 magazine positions - PDSP control RTU/MTU (Remote Terminal Unit) - Power supply: AC 400V±10% 50Hz - Power consumption: 10–15 kW (depending on configuration) - Dimensions: 4500 (L) x 3100 (W) x 2500 (H) mm - Weight: 4000 kg

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 2021, 3D AC SERVO SkyCNC WK Series CNC Milling Machine – 1250 mm x 1250 mm x 220 mm High-precision – Milling and drilling at extremely high speed and quality. (* Price depends on configuration; this is a brand-new laser machine from our own production) As a CNC milling machine manufacturer, Pfeifer-Technology, with its skyCNC milling and engraving machines, is your partner of choice. Our PFEIFER technology skyCNC WK series milling machines, featuring highly accurate ball screw drives on all axes, offer the highest precision, accuracy, and speed – all at an attractive price-performance ratio. The robust design, with a heavy-duty steel base frame weighing approx. 2.2 t, ensures high static rigidity of the machines, making the processing of solid wood and various metals effortless. The sophisticated positioning and distribution of the 35mm linear rails and guides, combined with the sturdy portal and its vibration-damping properties, are distinguishing features of our CNC milling machines. The advanced, freely programmable CNC control system allows flexible operation via touchscreen under all production conditions and comes standard with our PFEIFER technology skyCNC WK series milling machines. With this CNC control, you can create or import your milling data/CAD/CAM data and execute jobs independently of a computer. The tool changer (up to 16 tools), a full-aluminum vacuum table, various tool/workpiece cooling solutions, automatic lubrication of all axes, and further sophisticated details round off this milling system. With the PFEIFER technology skyCNC WK series, you receive a reliable and powerful large-format gantry milling system for your applications. - Drive system: ultra-precise ball screw on X, Y, and Z axes – high-precision production - Working speed: 15 m/min - XYZ working/processing area: 1250 x 1250 x 220 mm - Table size (vacuum table with integrated vacuum channels): 1220 x 1220 x 30 mm - XYZ repeatability: 0.03 mm - XYZ accuracy: 0.01 mm Dkjdpfx Agj Sd U Doqow - Compatible with DIN ISO CAM, etc. - Formats: ISO standard G-code, FANUC compatible - Options: spindle motor/tool changer/vacuum table as per customer requirements - Warranty: 2 years - Spindle power: from 5.5 kW (other spindle powers optional) - Spindle speed: 6,000 – 24,000 rpm (depending on requirements) - Spindle mount: BT 30 4ea ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine slots - Power connection: AC400 V±10% 50Hz - Power consumption: 10–15 kW (depending on configuration) - Dimensions: 2670 (L) x 1735 (W) x 1790 (H) mm - Weight: 2,700 kg

Kondisi: diremajakan ulang (bekas), Portalfräsmaschine TOS, Länge 3000 mm Dksdsfmn Txopfx Agqow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 6.000 mm, jarak gerak sumbu Z: 1.250 mm, kecepatan spindel (maks.): 12.000 rpm, model controller: Heidenhain iTNC530 mit Handrad, 1 Dkodpfx Agoxvx U Aoqew

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 800457, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.400 mm, jarak gerak sumbu Z: 1.000 mm, jarak antara penyangga: 2.000 mm, model controller: Siemens 840D SL, Mesin telah direkondisi secara menyeluruh pada tahun 2012. DETAIL TEKNIS Perjalanan X: 4.000 mm Perjalanan Y: 3.400 mm Perjalanan Z: 1.000 mm Jarak antara tegak: 2.000 mm Daya spindle: 37 kW Kecepatan putar: 12–2.800 rpm Jarak spindle milling ke permukaan penjepit: 280–1.280 mm Tipe dudukan: ISO SK-50 Dodpfx Agjx Uwnbsqokw Ukuran meja – longitudinal: 3.000 mm Ukuran meja – melintang: 1.500 mm Kapasitas beban meja: 2 x 10 t Rentang putar sumbu C: 0–360° (setiap 1°) Rentang ayun: 90°–0°–90° (setiap 1°) DETAIL MESIN Kontrol: Siemens 840D SL Sumbu: 5 dikendalikan Kebutuhan daya total: 70 kVA Dimensi & Berat Ruang yang dibutuhkan: sekitar 10.200 mm x 7.200 mm x 5.925 mm Berat mesin: sekitar 82 t PERLENGKAPAN Sistem pergantian alat otomatis untuk 60 alat 1 unit milling universal 1.750 Nm Catatan: Mesin sudah dalam keadaan dibongkar.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3.6002, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, beban meja: 12.000 kg, RINCIAN TEKNIS Sumbu X: 4.000 mm Sumbu Y: 3.000 mm Sumbu Z: 1.500 mm Tinggi celah: 1.550 mm Lebar celah: 2.500 mm Lebar meja: 2.000 mm Panjang meja: 3.000 mm Beban maksimum meja: 12.000 kg Tipe dudukan alat: HSK-A100 Djdpfexvrb Nex Agqjkw Berat maksimum alat: 30 kg Diameter maksimum alat: 250 mm Panjang maksimum alat: 500 mm Rentang kecepatan spindle bor: 5-6.000 rpm Torsi maksimum yang diizinkan pada spindle frais: 800 Nm RINCIAN MESIN Kebutuhan daya total: 30 kW Ruang yang dibutuhkan sekitar: 9,5 x 6,7 x 6,2 m PERLENGKAPAN Pengganti palet Demmeler

Kondisi: baru, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 800 mm, kecepatan pemakanan sumbu X: 30.000 m/menit, laju pemakanan gandar Y: 30.000 m/menit, laju pemakanan sumbu Z: 30.000 m/menit, panjang meja: 1.900 mm, lebar meja: 1.100 mm, kecepatan spindel (maks.): 6.000 rpm, beban meja: 4.000 kg, posisi kepala milling: Vertikal, torsi: 1.356 Nm, hidung spindel: SK 50 - DIN 69871A, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, STARVISION DH 2012 meyakinkan dengan konstruksi portalnya yang stabil, penggerak yang bertenaga, dan komponen berkualitas tinggi. Mesin ini menawarkan presisi tinggi, kekakuan, dan pemrosesan yang andal – bahkan untuk tugas pemotongan yang menantang. Sangat cocok untuk pembuatan cetakan, teknik mesin, dan produksi sesuai pesanan. Keunggulannya: ✔ Pengiriman dan pemasangan oleh teknisi JMT ✔ Dukungan teknis dan layanan di lokasi di Jerman ✔ Pelatihan dan instruksi untuk personel operator ✔ Pilihan pembiayaan yang fleksibel: sewa atau sewa dengan opsi pembelian Peralatan teknis: Pengontrol: ✔ Pengontrol HEIDENHAIN TNC 7 ✔ Layar TFT HEIDENHAIN 19" ✔ Motor, sistem pengukuran, dan roda tangan elektronik HEIDENHAIN Pendingin: Pasokan cairan pendingin internal (IKZ) 70 bar Pengganti alat: Majalah rantai 60 posisi dengan gripper ganda Pembuangan serpihan: Konveyor serpihan sabuk engsel (melintang) Konveyor sekrup ganda (memanjang) Dedpfoq Ixc Tox Agqokw Persiapan: Persiapan untuk sumbu ke-4 (meja putar) Penutup: Penutup penuh, bagian atas tertutup Akurasi: Akurasi posisi: ± 0,025 mm Akurasi pengulangan: ± 0,020 mm Hubungi kami – kami akan dengan senang hati memberikan saran dan membuat penawaran yang disesuaikan untuk Anda.

Kondisi: bekas, Travel in X-axis: 6500/13,150 mm Travel in Y-axis: 4000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 2250 mm Control system: Sinumerik 840 D Clamping surface of table: 5500/12,150 x 3000 mm Passage between columns: 3500 mm Max. distance between work table and spindle nose: 3000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Spindle speeds – stepless: 6.3 - 4000 rpm Milling spindle motor: 63 kW Torque at the spindle: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Feed rate X/Y/Z = 24,000 mm/min Total power requirement: 120 kVA Machine weight approx. 245 t Required space approx. 29 x 7.7 x 8.1 m The machine is in almost as-new condition and was completely overhauled and modernized in 2020 for €1.6 million! Equipment/Accessories: - Automatic tool magazine for 153 tool positions - Automatic milling head magazine for 6 milling heads - Machining modules/milling heads: Dsdpfx Agewa Dx Rjqekw  Machining module – straight – straight long –  Machining module – angle standard – 4000 rpm, 144 x 2.5b0, ISO 50  Machining module – narrow extended angle – 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5b0, ISO 50  Machining module – universal index – 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5b0, B-axis +/- 44 x 2.5b0, ISO 50 - Coolant system - Chip conveyor - Technical documentation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 23.291 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 750 mm, panjang meja: 3.200 mm, lebar meja: 1.400 mm, DETAIL TEKNIS Perjalanan Sumbu X: 3.200 mm Perjalanan Sumbu Y: 1.400 mm Perjalanan Sumbu Z: 750 mm Ukuran meja: 3.200 x 1.400 mm DETAIL MESIN Jenis kontrol: CNC Kontrol: Heidenhain Jam Operasi Waktu operasi spindle: 23.291 jam Djdpfjy R Dn Hox Agqjkw Waktu operasi program: 27.807 jam Jam nyala kontrol: 83.301 jam Jam nyala mesin: 73.907 jam

Kondisi: baru, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.000 mm, panjang meja: 3.000 mm, lebar meja: 1.700 mm, kecepatan spindel (maks.): 6.000 rpm, gerak cepat sumbu X: 24.000 m/menit, pergeseran cepat sumbu Y: 24.000 m/menit, pergerakan cepat sumbu Z: 24.000 m/menit, beban meja: 10.000 kg, posisi kepala milling: Vertikal, berat benda kerja (maks.): 10.000 kg, torsi: 1.392 Nm, berat keseluruhan: 30.000 kg, hidung spindel: SK 50 - DIN 69871/A, daya motor spindle: 53 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, STARVISION DX 3220 memberikan performa yang meyakinkan berkat konstruksi portal yang kokoh, penggerak yang bertenaga, dan komponen berkualitas tinggi. Mesin ini menawarkan presisi tinggi, kekakuan, dan pemesinan yang andal – bahkan untuk tugas pemesinan yang menantang. Sangat cocok untuk pembuatan cetakan, rekayasa mesin, dan produksi kontrak. Keunggulannya dalam sekilas: ✔ Pengiriman dan pemasangan oleh teknisi JMT ✔ Dukungan teknis dan layanan di lokasi di Jerman ✔ Pelatihan dan instruksi untuk personel operator ✔ Pilihan pembiayaan yang fleksibel: leasing atau sewa beli Spesifikasi Teknis: Pengendali: Pengendali Digital HEIDENHAIN TNC 7 Layar TFT HEIDENHAIN 19" Motor, sistem pengukuran, dan roda tangan elektronik HEIDENHAIN Pendinginan: Pasokan cairan pendingin internal (IKZ) 70 bar Pengubah Alat (ATC): Dksdpfshy Avpox Agqew Majalah rantai 60 posisi dengan gripper ganda Sistem Pembuangan Serpihan: Konveyor serpihan sabuk engsel (melintang) Konveyor serpihan sekrup ganda (memanjang) Meja Putar: Persiapan untuk sumbu ke-4 Penutup: Penutup penuh, bagian atas tertutup (termasuk atap) Akurasi: Akurasi posisi: ± 0,035 mm Akurasi pengulangan: ± 0,028 mm Hubungi kami – kami akan dengan senang hati memberikan saran dan membuat penawaran khusus untuk Anda.

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 306, en-001 Dkjdpfx Agevy Dugoqjw

Kondisi: baru, jarak pergerakan sumbu X: 6.200 mm, jarak lintasan sumbu Y: 2.600 mm, jarak gerak sumbu Z: 1.200 mm, kecepatan pemakanan sumbu X: 10.000 m/menit, laju pemakanan gandar Y: 20.000 m/menit, laju pemakanan sumbu Z: 15.000 m/menit, panjang meja: 6.000 mm, lebar meja: 2.400 mm, kecepatan spindel (maks.): 6.000 rpm, beban meja: 19.000 kg, posisi kepala milling: vertikal, torsi: 1.350 Nm, hidung spindel: SK 50, daya motor spindle: 53 W, masa garansi: 12 bulan, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, STARVISION FG 6226 adalah mesin frais portal berkinerja tinggi dan sangat presisi untuk mengerjakan benda kerja yang besar dan berat. Berkat konstruksi portalnya yang stabil, penggerak yang bertenaga, dan komponen berkualitas tinggi, mesin ini sangat ideal untuk pembuatan cetakan dan perkakas, teknik mesin, produksi berdasarkan pesanan, serta untuk tugas pemesinan yang menuntut dengan persyaratan tinggi terhadap stabilitas, kinerja, dan akurasi. Keunggulan dalam sekilas: ✔ Pengiriman dan pemasangan oleh teknisi JMT ✔ Dukungan dan layanan teknis di lokasi di Jerman ✔ Pelatihan dan instruksi untuk operator ✔ Pilihan pembiayaan yang fleksibel: sewa atau sewa guna beli Spesifikasi teknis: Sistem kontrol: • HEIDENHAIN TNC 7 • Layar TFT HEIDENHAIN 19" • Motor dan sistem pengukuran HEIDENHAIN • Roda tangan elektronik HEIDENHAIN Sistem pendingin: • Suplai pendingin internal (IKZ) 70 bar Pengganti alat: • Majalah rantai 60 posisi • Penggantian alat melalui penjepit ganda Pembuangan serpihan: • Konveyor serpihan engsel, melintang • Konveyor sekrup ganda, memanjang Persiapan: • Persiapan untuk sumbu ke-4 / meja putar NC Dkedpfxshy Avto Agqsw Pelindung mesin: • Pelindung penuh, bagian atas tertutup Akurasi: • Akurasi posisi: ± 0,035 mm • Akurasi pengulangan: ± 0,028 mm Hubungi kami – kami akan dengan senang hati memberi Anda saran dan menyiapkan penawaran yang disesuaikan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 71.080 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 22.000 rpm, model controller: Siemens SINUMERIK 840D, RINCIAN TEKNIS Rentang pergerakan sumbu X: 5.000 mm Rentang pergerakan sumbu Y: 3.000 mm Rentang pergerakan sumbu Z: 1.500 mm Dimensi benda kerja maks. (P x L x T): 4.000 x 2.000 x 1.000 mm Panjang meja: 4.050 mm Lebar meja: 2.050 mm Tinggi meja: 500 mm Kecepatan umpan sumbu X: 65 m/menit Kecepatan umpan sumbu Y: 65 m/menit Kecepatan umpan sumbu Z: 65 m/menit Kecepatan cepat sumbu X: 65 m/menit Kecepatan cepat sumbu Y: 65 m/menit Kecepatan cepat sumbu Z: 65 m/menit Posisi kepala frais: vertikal Penyangga alat: HSK 63A Kecepatan spindel: 22.000 RPM Daya spindel: 30 kW Torsi: 28,6 Nm Sumbu putar A: ±110° Rentang putar sumbu C: ±182,5° Kapasitas majalah: 20 stasiun Diameter alat maks.: 100 mm Berat alat maks.: 6 kg RINCIAN MESIN Pengendali: Siemens SINUMERIK 840D Daya sambungan: 150 kW Dimensi & Berat Dimensi (P x L x T): 8.000 x 7.500 x 6.200 mm Dimensi lemari kontrol (P x L x T): 600 x 4.200 x 2.600 mm Berat mesin: sekitar 78.000 kg Jam operasi: 71.080 jam Dksdszyl Azopfx Agqsw PERLENGKAPAN Tudung penghisap pada kepala frais untuk disambungkan ke sistem penghisap di lokasi Sistem laser NC4 untuk pengukuran alat tanpa kontak dan pemeriksaan kerusakan alat Probe pengukur nirkabel Renishaw RMP60 untuk pengukuran benda kerja Pelindung fleksibel / penutup gulung

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 37.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.750 mm, kecepatan spindel (maks.): 20.000 rpm, model controller: Heidenhain iTNC 530, Pemilik sebelumnya mesin ini adalah tim Formula 1 terkenal dari Eropa Tengah! Kepala milling baru saja diperiksa langsung oleh produsen mesin, sehingga telah direvisi sebagian dan sepenuhnya berfungsi! Mesin selalu berada dalam kontrak perawatan dengan pabrikan. DETAIL TEKNIS Perjalanan sumbu X: 5.000 mm Perjalanan sumbu Y: 3.000 mm Perjalanan sumbu Z: 1.750 mm Kecepatan umpan sumbu X: 65 m/menit Dkodpfx Agozcqncsqjw Kecepatan umpan sumbu Y: 65 m/menit Kecepatan umpan sumbu Z: 65 m/menit Kecepatan spindle maks.: 20.000 rpm Percepatan sumbu: 5 m/s² Torsi maks.: 63 Nm Torsi penahan (terkunci) poros A & C: 2.000 Nm Koneksi alat: HSK 63A DETAIL MESIN Kontrol: Heidenhain iTNC 530 Handwheel: HR420 Jam kerja spindle: sekitar 37.000 jam Jam daya aktif: sekitar 83.000 jam Daya spindle: 20 kW Konsumsi daya: 130 kW Tegangan: 400 V Frekuensi: 50 Hz Dimensi & Berat Kebutuhan ruang tanpa periferal (P x L x T): 7.500 x 8.500 x 6.600 mm Berat total: 90.000 kg PERLENGKAPAN Kepala milling garpu 2-sumbu 5 Kecepatan putaran dapat diatur tanpa tingkat Sistem pelumasan jumlah minimum Penukar alat 50 slot Penutup ruang kerja Catatan: Meja mesin tidak termasuk dalam paket pengiriman dan kabel penggerak motor X, Y, dan Z perlu diganti karena usia. Saat ini mesin sudah dibongkar dan disimpan. Namun, inspeksi tetap dapat dilakukan setiap saat dengan janji terlebih dahulu.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.360 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 15.000 rpm, model controller: Heidenhain TNC430 PA, Submission of a bid constitutes an obligation to collect the item within calendar week 25! TECHNICAL DETAILS Travel Range X-axis: 3,000 mm Travel Range Y-axis: 2,360 mm Travel Range Z-axis: 1,000 mm Feed Rate X-axis: 20 m/min Feed Rate Y-axis: 20 m/min Feed Rate Z-axis: 20 m/min Rapid Traverse X-axis: 20 m/min Rapid Traverse Y-axis: 20 m/min Rapid Traverse Z-axis: 20 m/min Max. Spindle Speed: 15,000 rpm Torque: 57 Nm Spindle Power: 18 kW Clamping Table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, longitudinal: 18H12 T-slot spacing: 250 mm Tool Holder: HSK 63 F Tool Clamping: hydraulic MACHINE DETAILS Dedpey Sxkrefx Agqokw Control: Heidenhain TNC430 PA Supply Voltage Type: Three-phase Power Requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Main Fuse: 63 A Dimensions & Weight Required Space (machine without control cabinet, L x W x H): 6,000 x 3,500 x 4,050 mm Total Weight: 15,000 kg EQUIPMENT Steplessly adjustable spindle speed Tool changer TT140 touch probe Note: Machine is delivered without enclosure. The zero-point clamping plates shown in the images and other accessories are not included in the scope of delivery.

Kondisi: baru, Portal machine – the space miracle! CNC gantry milling machine for large travel distances with minimal footprint! ADVANTAGES: • Optimal use of space, completely unobstructed clamping area on the table • Superior chip protection thanks to top-mounted axes • Especially suitable for tall and bulky components FEATURES: - Gantry function on Y-axis (synchronized via ProNC software) - CAN bus system with EC servo motors on all axes - Backlash-free set steel ballscrew drives with steel linear guides - T-slot table for easy clamping of workpieces and accessories - Clamping area from 1100x1000 to 1750x2000 mm - Variable clearance from 340 mm to 590 mm - Spindle motors iSA 500 / 750 / 1500 / 1500L as well as iSA 900 / 1500W / 1500WL / 2200 - Speed: up to 250 mm/sec possible - PILZ safety technology - Effortless operation via height-adjustable CNC panel - Network-capable control PC with WINDOWS - Parallel sliding door - Workpiece clamping via T-slot plate - Variable gantry clearances depending on customer application Dkodohqhlvjpfx Agqow DESIGN: Gantry: moving, Table: fixed APPLICATIONS: • Machining • Measuring and inspecting • Dispensing applications SUITABLE FOR PROCESSING: • Aluminium / Light metals • machinable plastics • Ceramics • Non-ferrous metals (brass, bronze, etc.) • Plastics • Wood Optimal use of space with the smallest possible footprint. Limited space but require maximum travel? We have the answer. Our Overhead machine series offers maximum travels on a compact footprint. All drives are mounted on the upper part of the machine, keeping the machine table completely free for your individual applications. With a wide range of variable features and additional options, the CNC machine can be optimally configured for many industries and applications. In addition to machining, the OverHead Gantry M is also ideal for measuring, inspection, and dispensing tasks. With spindle power up to 2.2 kW, 20,000 rpm, and travel speeds up to 250 mm/sec, it is suitable for woodworking and plastics as well as for light alloys and non-ferrous metals. The unobstructed working area and excellent price/performance ratio offer decisive advantages over comparable products. The OverHead Gantry M is available in five sizes for various travel ranges from M20 to M50. Need the control cabinet on the right side or prefer the control unit on the left? No problem—we are happy to accommodate your requests and naturally take care of maintenance and support for your OverHead Gantry M. Our service technicians are available by phone and can be quickly on-site if required. We also offer our in-house software isy-CAM 2.8 and can provide advice tailored to your specific application. Many options available on request!

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 2259, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.900 mm, kecepatan rotasi (maks.): 24.000 rpm, model controller: Siemens 840D, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Perjalanan sumbu X: 6.000 mm Perjalanan sumbu Y: 3.500 mm Perjalanan sumbu Z: 1.900 mm Sumbu b: +/- 110° Dodpfxeyv A Dke Agqjkw Sumbu c: 360° Putaran: 24.000 rpm Tipe spindle: HSK 63 Motor spindle: 25 kW Ukuran meja: 6.000 mm x 2.500 mm (pola lubang 22H7 / M16) Feedrate X + Y: 30.000 mm/menit Feedrate Z: 28.000 mm/menit Rapid traverse: 30.000 mm/menit DETAIL MESIN Kontrol: Siemens 840D Penukar alat: 40 alat PERLENGKAPAN Spindle: Fischer (Tipe MFWS 1709/30, 2 unit) Kepala milling: Forest Line (Tipe: kepala garpu, sumbu b dapat diayunkan +/- 110°, sumbu c berotasi 360°) Conveyor serpihan Richter (conveyor scraper) Pengukuran alat Blum Stasiun penyimpanan kepala milling (2 unit)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 42.832 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 760 mm, model controller: FANUC SERIES 18i MB, jarak antara tiang: 2.300 mm, 1 Dkodpfx Asymxi Aegqow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 47.870 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 760 mm, beban meja: 10.000 kg, kecepatan rotasi (maks.): 6.000 rpm, DETAIL TEKNIS Sumbu X perjalanan: 3.000 mm Sumbu Y perjalanan: 2.100 mm Sumbu Z perjalanan: 760 mm Jarak antara tiang: 2.300 mm Ukuran meja: 3.020 mm × 2.010 mm Kapasitas beban meja: 10.000 kg Koneksi spindle: ISO-50 Kecepatan spindle standar: 6.000 rpm Motor spindle (kontinu / 30 menit): sekitar 22/26 kW Kapasitas penukar alat: 32 alat Diameter maksimum alat: Ø 127 mm / Ø 215 mm Panjang maksimum alat: 350 mm Dsdox Agh Repfx Agqskw Berat maksimum alat: 20 kg Kecepatan rapid X: hingga 20.000 mm/menit Kecepatan rapid Y: 15.000 mm/menit Kecepatan rapid Z: 15.000 mm/menit Kecepatan pemotongan: sekitar 1 – 10.000 mm/menit DETAIL MESIN Jam operasi program: 47.870 jam PERLENGKAPAN Ekspansi perlengkapan ke penukar kepala otomatis dengan kepala frais sudut