Beli Spadoni Ruang Bawah Tanah Fermentasi Dan Penuaan Spadoni 12Hl (1.200 L) (2019) bekas (75.160)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.850 mm, panjang total: 12.125 mm, lebar total: 5.150 mm, berat keseluruhan: 8.000 kg, masa garansi: 12 bulan, tinggi dalam: 5.000 mm, panjang dalam: 12.000 mm, lebar dalam: 5.000 mm, Perlengkapan: kabin, pencahayaan, EN: PAINT BOOTH 12x5x5M Model from the EZ Series: - LED ceiling lighting - LED side lighting - RIELLO oil burners - Four fans, including: ‎ ㅤ- 2x supply air fans ‎ ㅤ- 2x exhaust fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm should be considered – can be positioned on the right or left side. - Structure: Galvanized steel frame construction - Heat exchanger: High-quality stainless steel - Panels: Filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibrations and the air thrust effect from the main supply air duct. Dual-layer roof: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: radial fan 7.5 kW – 2 units - Exhaust system: radial fan 7.5 kW – 2 units Air filtration system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 angled fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burners: Ijdpfx Ajxm U Exofioia Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heat-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the roof of the cabin - Insulated roof - Pass-through doors - Water wall - Color according to RAL color chart - EX version (explosion-proof) available

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, masa garansi: 12 bulan, tinggi total: 1.075 mm, panjang total: 1.942 mm, lebar total: 820 mm, berat keseluruhan: 150 kg, arus masuk: 32 A, daya: 7,4 kW (10,06 hp), New device 12 months warranty Advantages: + Excellent baking quality at an outstanding price-performance ratio + Robust, durable stainless steel construction + Manual thermostat + Electric raising and lowering of the basket via push buttons + With drip table, located on the left (optionally right) of the unit, foldable + Equipped with a foldable steam lid + Easy cleaning and maintenance + Incl. 1 reversible basket, 6-row, for easy turning of Berliners + Incl. 1 proofing rack equipped with 10 tilting trays Special accessories, available for an additional charge upon request: - Open immersion basket, e.g. for donuts, curd balls, apple pancakes, etc. - 5-row reversible basket, for larger dough pieces - Proofing rack with 8 or 9 tilting trays (greater spacing between the trays) Technical Data: - Capacity: max. approx. 48 pieces (depending on product) - Dimensions: Ijdpfxjw Skzns Afioia --- Footprint: 1050 x 820 mm (W x D) --- Overall: 1942 x 820 x 1075 mm (W x D x H) - Power: 7.4 kW - Electrical connection: 400 V - 3Ph - 50Hz - 32A CEE plug - Net weight: 150 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, masa garansi: 12 bulan, tinggi total: 1.075 mm, panjang total: 1.560 mm, lebar total: 820 mm, berat keseluruhan: 105 kg, arus masuk: 32 A, daya: 7,4 kW (10,06 hp), New equipment 12-month warranty Advantages: Iijdpfew Skx Hjx Afija + Excellent baking quality at a top price-performance ratio + Robust, durable stainless steel construction + Manual thermostat + Electric basket lifting and lowering via push buttons + With drip tray, left side (optionally right) of the unit, foldable + Equipped with a foldable steam lid + Easy cleaning and maintenance + Includes 1 reversible basket, 6 rows, for easy turning of Berliner doughnuts + Includes 1 proofing trolley with 10 tilting trays Special accessories, available at extra cost on request: - Open immersion basket, e.g. for donuts, curd balls, apple fritters, etc. - 5-row reversible basket, for larger dough pieces - Proofing trolley with 8 or 9 tilting trays (greater spacing between trays) Technical data: - Capacity: max. approx. 36 pieces (depending on product) - Dimensions: --- Footprint: 860 x 820 mm (W x D) --- Overall: 1560 x 820 x 1075 mm (W x D x H) - Power: 7.4 kW - Rated connection: 400 V - 3Ph - 50Hz - 32A CEE plug - Net weight: 105 kg

Kondisi: diremajakan ulang (bekas), 100,000 litre water tank – fire water tank – underground storage tank for subterranean installation, single or double-walled, 1 manhole DN 600 (access hatch) with blank cover including seal and bolts, external bitumen insulation – used – Tank capacity: 100,000 litres / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight: approx. 11,600 kg Material: Steel grade S 235 JRG 2 This tank complies with the requirements of DIN 14230 (Underground Fire Water Tank). The tank is equipped with a fire water suction connection according to DIN 14244, fitted with a fire brigade coupling/fixed coupling type A to DIN 14319, Form B design, without dip tube. Additionally, the tank features a vent flange connection NW/DN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tank has been emptied, cleaned, and factory-coated externally with bitumen by us - Upon request, the tank can be provided with a full internal bitumen-based coating (corrosion protection) or an internal epoxy resin lining - Alternatively, the tank can be lined internally with a synthetic membrane Iijdpsd E S U Sjfx Afija Cost-effective delivery with our own truck is possible. Simply inform us of your delivery location and we will promptly provide the exact freight costs. Inspection is possible at any time by prior appointment. For further information, please call us or send an email to s.barth (a) barth-tank.de. Trade-in and purchase of tanks/containers possible – feel free to contact us regarding this. Naturally, we always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Kondisi: bekas, - Dimensi: 2150x1330x2100 mm - Dimensi pintu: 1010x1900 mm - 2 troli 600x800 atau 800x800 - No. seri: 10130992 - Tahun pembuatan: 2005 - Tegangan: 400V - Frekuensi: 50Hz Isdpfx Afsx Arzcoijia - Suhu operasi: 32°C - Daya pemanas: 2,5 kW - Daya pendingin: 2,99 kW - Berat: 420 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2007, jam operasional: 10.339 h, kapasitas angkut: 4.674 kg, tinggi angkat: 4.180 mm, pengangkatan bebas: 1.370 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.200 mm, lebar kerangka garpu: 1.750 mm, panjang garpu: 2.000 mm, berat kosong: 7.505 kg, panjang total: 3.200 mm, jenis penggerak: Diesel, lebar konstruksi: 1.460 mm, Diesel forklift Load center: 500 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 355/50-15 Rear tires type: Superelastic Rear tires size: 7.00-12 Description: In addition to this Dantruck model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in our warehouses in Hamburg and Gdańsk. Visit our website - sago-online. Leasing & financing at attractive terms are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this 8450DG. P.S.: Our forklift master workshop specializes in repair, maintenance, refurbishing, and custom builds for forklifts from 8 tons upwards. We are also glad to offer your vehicle for consignment sale in our facility. Iodpfowf Skrjx Afieia Side shifter, fork positioner, heating, full cabin, full free lift,

Kondisi: sangat baik (bekas), Dijual hoist rantai listrik merek terkenal Yale model CPVF 10-8 NE. Perangkat dalam kondisi teknis sangat baik, dilengkapi dengan sistem kendali radio Magnetek (remote + receiver). Spesifikasi teknis: • Model: CPVF 10-8 NE • Kapasitas angkat: 1000 kg Iiedpfx Afjyrh I Eoisa • Tahun produksi: 2019 • Daya: 400V / 3 fase • Kecepatan pengangkatan: 2 / 8 m/menit • Pengendalian: remote radio • Kondisi: sangat baik, jejak pemakaian normal

Kondisi: baik (bekas),

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Gardu trafo 400 kVA, tahun 2019, stasiun UK220-2.9X, trafo DOTUL400/10 tahun 2013, trafo minyak, 10kV ±2x2,5 %/400V, dengan terminal tegangan tinggi AK, dengan bushings porselen sisi rendah, termometer penunjuk. Iodpfx Aoxzq Hbefioia

Kondisi: bekas, Tahun pembuatan: 2013, overview-2023-kieselgurfilter-spadoni Iisdpfx Afoxfcc Asioa

Tahun pembuatan: 2019, Kondisi: bekas, Tahun: 2019 Iijdpfsyk En Tsx Afiea Kecepatan: 12.000 bph Terowongan uap Sistem penolakan botol Fitur keselamatan Kode: EA 643 -Diameter wadah minimum 50 mm -Diameter wadah maksimum 115 mm -Tinggi wadah minimum 100 mm -Tinggi wadah maksimum 340 mm -Diameter sleeve minimum 25 mm -Diameter sleeve maksimum 130 mm -Panjang sleeve minimum 40 mm -Panjang sleeve maksimum 320 mm

Kondisi: baik (bekas), Included in the scope of delivery: 01x Depth crossbeam frame, used Material color: Sendzimir galvanized Total length: approx. 1,250 mm for rack depth: 1,200 mm clear support span: approx. 1,100 mm beam support: approx. 50 mm support angle: L: approx. 80 x 80 mm total width: approx. 860 mm internal width: approx. 855 mm material thickness: approx. 3 mm Side frame: length: approx. 1,2450 – 1,070 mm front tapered depth: approx. 200 mm height: approx. 195 mm End stop: depth: approx. 200 mm height: approx. 195 mm Isdor Dr Suspfx Afijia Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This is a used item; scratches, dents, and signs of use may be present. This item is offered for collection only. Should transportation or shipment be required, this will incur additional costs, which can be inquired with us separately, depending on the delivery location and scope of delivery.

Kondisi: baru, Motor tiga fasa Merek: Danfoss Tipe: VCM 330/M21 R1 L 2T 192 H 1514 400 Volt 3 kW 6,4 Ampere 3000 rpm Dengan konverter frekuensi terpasang Danfoss: 0 - 7560 rpm Belum pernah digunakan, dalam kemasan asli yang telah dibuka Ukuran transportasi: Panjang: 350 mm Lebar: 195 mm Tinggi: 270 mm Berat: 29,5 kg Iedpfx Afoxughzsisia

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.900 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 700 mm, produsen pengendali: Heidenhain, RINCIAN TEKNIS Perjalanan X: 2.900 mm Perjalanan Y: 1.000 mm Perjalanan Z: 700 mm Tipe Dudukan Alat: SK40 Posisi alat: 32 RINCIAN MESIN Iiedpfx Aexltfhefiea Produsen kontrol: Heidenhain PERLENGKAPAN Konveyor serpihan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 7 h, ABB IRB2600-12/1,85 Demo Robot 2019, penuh opsi, sekitar 7 jam pemakaian Iisdexq Ttispfx Afija PERKEMBANGAN GSG ROBOTICS GSG Robotics GmbH, didirikan pada 2005 di Gütersloh, telah berlokasi di Marl sejak 2015 dengan area layanan luas untuk perawatan dan perbaikan robot. Selama bertahun-tahun, kami telah berkembang menjadi mitra holistik dalam semua hal yang berkaitan dengan robot industri dan teknologi otomasi. Kami adalah penyedia layanan penuh untuk dua produsen robot terkenal, ABB dan Fanuc.

Kondisi: bekas, jarak tempuh: 313.000 km, jenis bahan bakar: diesel, Tahun pembuatan: 2019,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Iijdpfxsmhhype Afija

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized Iiodpfxjmhh Dhs Afiea - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth Iodpjmhhx Isfx Afioia - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Iisdeh Ek Dajpfx Afija Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. Iiodpfxsmhh Ans Afiea When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level. Iisdpfxomhhf Ss Afiea

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Isdpfx Asmhhl Hsfioia Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Iodpfxemidyfe Afioia Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg Isdpfx Aemkixwofieia - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.