Beli Blm Mesin Bending Tabung bekas (77.906)

Kondisi: baru, Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2025, jenis kontrol: manual, Perlengkapan: Penandaan CE, dokumentasi / manual, OMEC 4-Roll Symmetrical Mechanical Plate Rolling Machine, Double Pinch, 1530×2.5 mm, New “CE” Made in Italy. - Double pinch design. - Powered top and bottom rolls with equal torque. - Powered up/down movement of side rolls. - Frontal opening for the top roll. - Special bearings for side rolls. - External lever for roll inclination adjustment. - Sheet clamping with bearing-equipped device. - 2-pedal foot control. - Electrical panel in compliance with “CE” regulations. - mm scale indicator for sheet clamping. Standard equipment included with the plate rolling machine: - Frontal conical bending device on the top roll. - 2 digital readouts for side roll positioning. - 1 digital readout for powered sheet clamping. - Roll grinding/turning after hardening treatment. - Roll hardening. - Lateral loading table + sheet centering guides with mm scale references. Iodpey E Schsfx Alceat Working length: 1530 mm. Top and bottom roll diameter: 90 mm. Side roll diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D 3 x D 5 x D). Roll hardness (HRC): 55/60, depth 2 mm. Installed power: 1.8 kW. Overall dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg.

Tahun pembuatan: 1993, Kondisi: diremaj di bengkel (bekas), Baujahr: 1993 / 2020 komplett überholt mit neuer SPS-Steuerung Rohrdurchmesser max.: 100 mm Wandstärke: 10 mm Zuglänge des Rohrs: 6000 / 12000 mm Dornbiegen bis 4 mm Rohrwandstärke, Dornloses Biegen von 5,0 – 10 mm Rohrwandstärke Iasdpfx Asiau Uuslcot Biegewinkelgenauigkeit: ± 0,2 ° Gesamtanschlusswert: 50 kW Maschinengewicht: ca. 6 t

Kondisi: baru, Horizontal bending machine Fastech FP 40 Description • Pressure: 40 t • Stroke: 285 mm • Max. tool height: 250 mm • Flat bar on the vertical edge: 200 x 24 mm • Working speed: 10.0 mm/sec • Return speed: 10.0 mm/sec • Working height: 930 mm • Table: 660 x 1250 mm • Total power requirement: 4.0 kW • Motor: 400 Volt 50 Hz Iedpfx Aefg Eu Rslcsat • Weight: 1100 kg • Dimensions (L x W x H): 1250 x 650 x 1250 mm • Oil capacity: 40.0 l Features: • Hydraulic horizontal bending machine • Solid working table made of stabilized steel • Machine constructed from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, translate_de_hu_01 Iasdpfx Aloy Ez A Rocjt

Kondisi: baik (bekas), Tahun pembuatan: 1996, jenis kontrol: Kontrol CNC, Diameter pipa: 4–28 mm Tebal dinding: / mm Radius tekuk minimum: 1,5 x D – 2,0 x D mm Kontrol: Siemens LOGO Kapasitas pompa: 4,5 l/menit Sudut tekuk maks. +/-: 190° Tekanan nominal: 250 bar Tekanan operasi: 3095 bar Iasdpfxey Ixmxe Alcot Kapasitas pompa: 4,5 l/menit Kebutuhan daya total: 1,5 kW Penggerak: Silinder hidrolik dan rantai rol

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 32 t, tinggi kerja: 200 mm, model controller: Siemens 840D, panjang kerja: 2.150 mm, DETAIL TEKNIS Panjang tekukan: 2.150 mm Tinggi tekukan maksimum: 200 mm Panjang/lebar minimum antara tekukan: 160-350 mm Gaya tekan: 32 t DETAIL MESIN Kontrol: Siemens 840D Dimensi & Berat Dimensi (P x L x T): 8.500 x 7.000 x 2.850 mm Berat: 30.000 kg Ijdpey D Ihwjfx Alceat PERLENGKAPAN Pergantian alat otomatis Manipulator Siklus tekuk balik Sistem sentering pelat Alat atas tambahan Sistem pemuatan & pembongkaran

Kondisi: baru, Tahun pembuatan: 2026, en_01 Iaedpfxowirzfo Alcet

Kondisi: baru, en-001 Ijdpfx Aljwiq A Ujcoat

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, 1 Iedpfx Alexaawgocsat

Kondisi: baru, Tahun pembuatan: 2026, THE COST-EFFECTIVE TUBE BENDING MACHINE FOR TIGHT BEND RADII: This bending machine, equipped with a free-standing bending head, can be easily converted for right- or left-handed bending, making it ideal for handling complex geometries. The plug-in bending tools allow for quick changeovers to accommodate different tube diameters. A high-speed hydraulic system reduces non-productive times—an essential factor for series production. Clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, lengths, and rotation angles for up to 50 bends per tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine features two operating modes: In "Simple Bending," the length and rotation of the bends relative to each other are displayed automatically. In "Controlled Bending" mode, the bending data is preset, and a continuous target/actual comparison is performed during bending. Iedpfsng Exaox Alcsat This minimizes user-dependent error rates by eliminating mispositioning within a tolerance window. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically retracted early upon achieving the desired bend angle. The compact drive unit with detachable mandrel support offers advantages on site, especially for custom constructions with very large tube feed lengths. It is also available in a stationary version with an integrated storage system for tools and mandrel rods. An economical alternative to fully automated CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • System engineering, e.g. chemical industry • Metal construction • Prototyping Technical data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Minimum/maximum bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control with bend angle setting (0.1°) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions available in longer lengths) • Maximum bending angle: 180º • Weight: 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Automated or manual (via foot switch) positioning of length and rotation with brake function • Automatic length and rotation positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking clamping force • 10" touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Consulting and information session at your location • Consulting and transaction possible as leasing/financed purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Technical data: Iaodpfsndn Agox Alcet • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: Iaodpfx Aonh R Ekslcst • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Kondisi: baru, Tahun pembuatan: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction • Plumbing and heating installation • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material Isdpfxonfvx Ns Alcjat • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction TECHNICAL DATA: Iaodsnfvy Uopfx Alcjt • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII Iaedonh R Suspfx Alcot This bending system provides solutions for complex geometries with standard radii of 2xD for tube dimensions ranging from 20 to 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD can also be reliably achieved in serial production. With a tool height of 120 mm, there is ample capacity for special profiles as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid design of the mandrel support and bending arm, contribute to the desired bending results. The plug-in bending tools enable quick changeovers to other tube sizes. The clamping force for tube fixation is fully adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angle, length, and twisting angle for up to 50 bend sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In "Simple Bending", the length and angle of the bends are automatically displayed relative to each other. In the "Controlled Bending" mode, the data is stored beforehand and a permanent target/actual comparison is conducted during the bending process. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal fabrication • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control; bend angle adjustment (0.1°) • Mandrel support lengths: 3000/4500/6000 mm • Maximum 180º bend result • Weight: 1600–3200 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and twist positioning via automatic braking function or manual stops using foot switch • Semi-automatic length and twist positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information session at your location • Advice and acquisition via leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation Iaedpfx Alsng Amkjcet • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement Iodpfxong A R So Alcjat • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: diremajakan ulang (bekas), Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2003, jam operasional: 24.000 h, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 4.100 mm, Sudut pembengkokan (maks.): 183 °, radius pembengkokan (maks.): 300 mm, ketebalan dinding: 8 mm, de-Transfluid DB 2090 DB CNC Dornbiegemaschine für Rohre. Hochwertige deutsche Maschine in exzellentem Zustand, die Haupt-Hydraulikpumpen wurden komplett generalüberholt und der Hauptkopf vollständig instand gesetzt. Es muss lediglich ein neuer Encoder installiert werden, dann ist die Maschine betriebsbereit. Ausstattung: - Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D - Vorzeitiger Dornrückzug - Vollautomatische Einstellung der Spannbacken und Mitnehmer - Verstärkter Mitnehmer für enge Radien bei dünnwandigen Rohren - Lange Aufspannlänge mit 4000 mm Überdorn Im Lieferumfang ist umfangreiches Werkzeug im Wert von über 150.000 AUD enthalten: - 101,6 mm - 152 mm CLR - 101,6 mm - 200 mm CLR - 76,2 mm - 114 mm CLR - 76,2 mm - 200 mm CLR - 76,2 mm - 238 mm CLR - 63,5 mm - 96 mm CLR - 57,2 mm - 86 mm CLR - 50,8 mm - 76 mm CLR - 44,5 mm - 67 mm CLR - 40 x 40 mm - 120 mm CLR - 50 x 50 mm - 150 mm CLR Ijdpfx Aljtrd T Teceat - 60,3 mm - 150 mm CLR - 48,3 mm - 120 mm CLR

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Sheet width 3200 mm Sheet thickness 3.0 mm (mild steel) Sheet thickness for stainless steel 2.0 mm Opening width / upper beam 300 mm Upper beam speed 40.0 mm/sec Bending beam adjustment 80.0 mm Working height 900 mm Bending beam speed 90.0 deg/sec Control system: MULTIBEND 5000 Back gauge – adjustable 10 - 1550 mm Accuracy +/- 0.1 mm Compressed air 5.0 bar Operating hours approx. 1,000 h Voltage 400 V Total power requirement 2x 4.0 kW Weight 4400 kg Dimensions L-W-H 4295 x 2225 x 1775 mm Original price approx. €85,000 Machine with only approx. 1000 operating hours (!!) Iaedpfxjxabz Ts Alcet Good condition (!!) Special price on request - Inspected condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility for bending cassettes, boxes, and profiles ! High flexibility in part design ! High productivity and throughput ! Easy operation Equipment: - Motorised universal folding machine "RAS 73.30" * High-precision mechanics with modern control technology * Suitable for both single-part and series production * Robust high-speed machine with rapid axis movements * Torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * Material and tooling library * Swiveling – located front right * 1x emergency stop switch - CNC electric upper beam adjustment * Fast closing/opening speed * Programmable opening and closing height * Radius bending without special tools (multiple bends) * Rigid upper beam for straight bends * 1x set of RAS segmented upper tools ... height 80 mm * RAS “Click-In” tooling system (pneumatic) - CNC electric bending beam adjustment * Fast switchover motion: short production times * Crowning system compensates for deformation due to bending forces * 1x set of RAS segmented bending tools - CNC electric back gauge * Fast positioning, high repeat accuracy * Table sheets support the weight of the material * Table sheets made of stainless steel with ball rollers - 2x movable double foot switch - 1x RAS tool trolley for bending tools (mobile) - Operating manual (PDF) + original circuit diagram

Kondisi: bekas, Tahun pembuatan: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm steel Bending capacity: 8.0 mm steel Top roll diameter: approx. 205 mm Side roll diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Iasdpsxacdvsfx Alcst Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept offers a wide range of bending and rolling options - Swivelling control unit at the front * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters up to 1.1 times the top roll diameter achievable - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy steel welded construction - Electro-hydraulic drop-end for easy removal of pipes - Manometer / pressure indicator for the rolls - Safety device (safety cable with switch unit) - Operating instructions (PDF)

Kondisi: bekas, F J Edwards Ltd Mesin Penekuk Lembaran Logam, Lebar Maksimal Material 1850 mm, Konstruksi Besi Cor Iedpfx Aloy H Ifnscoat Lokasi: Unit-unit ini berlokasi di High Wycombe, UK. Sayangnya, tidak ada fasilitas pemuatan di lokasi, pembongkaran dan pemuatan menjadi tanggung jawab pembeli.

Kondisi: bekas, Mesin tekuk manual Schuller MAH 2-2000, lebar kerja 2030 mm, ketebalan plat 2,0 mm Ijdjxn Avnepfx Alcsat

Tahun pembuatan: 1969, Kondisi: bekas, Swing bending machine Albert Stahl Type ABK 400/5 Useful length: 2530 mm Sheet thickness: 5 mm Iedpfxoh Rkh Do Alcsat

Kondisi: baru, Tahun pembuatan: 2026, T20260428001 Ijdswirc Ajpfx Alcjat

Kondisi: bekas, Tahun pembuatan: 1986, blechbiegemaschine-3walzen-2040mm-40mm Iajdpey Ezzyefx Alcst