Beli Then - bekas (221)

Kondisi: baik (bekas), Tahun pembuatan: 2020, 3 tugger trains with trailers, Still - used - : Price (net, ex location): €32,500! Sale only as a complete package! Manufacturer: Still Model: CX-T Year of manufacture: 2012, approx. 7,720 operating hours 2014, 7,800 operating hours 2014, 1,400 operating hours Electric trailers Year of manufacture: 2020 Quantity: 8 units Mechanical trailers Year of manufacture: 2014 Quantity: 4 units Accessories: Card reader Spotlight Warning beacon Battery: year 2023, quantity: 4 units Charging station and battery change rack, 1 unit each Difference between electric and mechanical trailers: The new model lifts carts electrically. On the mechanical version, compressed air is generated during operation and used for lifting What can be transported with the trailers? The carts allow for easy transport of Euro pallets, wire mesh containers, and industrial pallets. A single battery rack with a central charging station is sufficient for all three trains. The batteries were charged in-house and then swapped via the rack. Speeds: 12 km/h, but throttled down to 6 km/h in our operation. Nodpsw D E Hwjfx Ahrjdc Available: immediately Condition: good Location: 59557 Lippstadt

Kondisi: bekas, Tahun pembuatan: 2000, Depalletizing and Palletizing System for Euro Pallets with PETCYCLE Crates. Empty pallets are delivered from above via a lift. The pallets first pass through a pallet securing remover, where the empty crates are fixed, the transport securing cord is cut and extracted. Next, the crates are destacked and conveyed to the bottle ejector. The pallets then proceed to the pallet magazine/loader. After reloading, the pallets are secured with a cord and transported upwards by a second lift. Our team at VBW Asset Trade is happy to answer any questions. Please send us an inquiry or simply give us a call! Ndedpfx Aox T Ak Sehroc Machine Type: Depalletizing and Palletizing Unloader Capacity: 3600 crates/h Loader Capacity: 3600 crates/h Power: 21 kW Voltage: 230/400 V Frequency: 50 Hz Compressed Air: 6 bar, 30 Nm³/h Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 l (400 x 300 x 256 mm), 9 x 1.0 l, 6 x 1.0 l, 6 x 1.5 l (300 x 200 x 365 mm) Layer Pattern: Interlocked stacking up to 5 layers Transport Direction: right -> left Operation / Control: at the control cabinet, Simatic OP17 / Simatic S7-300 Material: housing / frame construction in black steel Position: free-standing with floor fixings Features: pallet infeed and outfeed, roller conveyors, lifts for 1x empty and 1x full pallet, Eurapack pallet securing remover with cord suction, unloader, pallet magazine, loader, Bornbinder pallet securing, safety guards, stairs and platforms, control cabinets

Kondisi: bekas, Tahun pembuatan: 1985, Core drilling diameter – max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofit and modernization by TBT _____ Drilling – solid drilling approx. 1 – 18 mm Drilling – counterboring approx. 25 mm Drilling depth 320 mm Ndjdpfx Ahst Hwvaeroc Center height above bed/table 150 mm Travel of drilling slide max. approx. 500 mm Travel of positioning slide (linear guides) 500 mm Spindle center distance 125 mm Drilling feed/rapid traverse stepless approx. 35 – 1,000/7,000 mm/min Center distance between the spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive power of the complete machine approx. 33 kW – 400 V – 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump parts (Ø approx. 25 x 150 mm, hole approx. 5 mm) which are loaded via an inclined conveyor into a dual positioning station for correct orientation check, and then automatically and in pairs via a crosswise to the machine mounted loading portal (2 x double grippers) clamped in the machining zone between drilling bush holder and powered tailstock. After machining, the second pair of grippers takes over the workpieces and transfers them to a blow-off and drill breakage detection station. After successful inspection, the workpieces drop into transport containers. - The process programming and monitoring is handled by a SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated HF spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw spindle - Separate coolant oil system approx. 1,500 liters with various pumps and a sophisticated belt filter purification system - Separate hydraulic system approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate electrical and control cabinets, CE-marked Condition: good to very good – soon ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Automated assembly device for filter inserts – suitable for Arburg injection molding machines For sale is a complete assembly unit that was previously installed on an Arburg injection molding machine. The system was used to precisely and automatically insert filters into plastic components. It features a modular design and is suitable for integration into existing production lines or as a base for new automation projects. Features & Components - Sturdy frame made from aluminum item profiles Robust, modularly expandable, and easily adaptable - Siemens control unit Industrial-grade PLC for reliable, repeatable processes - Festo valves & pneumatic cylinders Multiple cylinders and solenoid valves, cleanly installed and easily accessible - Integrated conveyor belt For removal or onward transport of finished parts - Protective covers & safety components Partially glazed panels, safety doors, emergency stop button - Complete electrical & pneumatic systems Control cabinets, sensor wiring, pneumatic distribution Condition The system is used but fully functional. It was last in productive operation, then dismantled and stored dry. Some cables are loose or need to be reorganized. Ideal as a retrofit project or for plant manufacturers, prototyping, or special-purpose machine construction. Application areas - Filter assembly - Automated feeding processes - Pick-and-place applications - Handling at injection molding machines - Special-purpose machine construction / automation technology Control unit is operational Njdpjx Sqkkefx Ahrodc No documentation available.

Tahun pembuatan: 2014, Kondisi: baik (bekas), High-quality airpad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and cushioning elements from PA and PE film, as well as air cushions made from paper. Typically, four air pillows are produced per work cycle. Various formats can be manufactured, with 10 programs available for storing multiple parameters. By selecting the relevant program on the display, air cushions from 4 cm to 16 cm in length and with a user-defined filling degree can be produced. The generated air cushion strips are wound into rolls via a motorized unit. Once the roll is full, the machine switches off automatically. The finished roll can then be manually removed and subsequently used as packaging material. The machine can be moved on castors and secured by brakes. Nsdekkcqqspfx Ahredc A demonstration under power is possible.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1990, Various chamber filter presses from Rittershaus & Blecher, Netzsch, and Passavant available, plate sizes 1200 x 1200 and 1500 x 1500 mm, from 40 to 145 PP plates, capacities ranging from 1,000 to 4,500 liters, length approx. 6 to 13.6 m. All presses require refurbishment; they will then be sold with a 1-year warranty. A piston diaphragm pump for feeding can also be offered. Location: 58762 Altena. Ndjdpfx Ahsgpxg Sjroc

Kondisi: sangat baik (bekas), jarak tempuh: 46.233 km, daya: 132 kW (179,47 hp), pendaftaran pertama: 09/2021, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 4.330 mm, bahan bakar: diesel, warna: abu-abu, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, jumlah gigi: 9, kelas emisi: Euro 6, beban gandar yang diizinkan (gandar 1): 1.850 kg, beban gandar yang diizinkan (gandar 2): 2.100 kg, Tahun pembuatan: 2021, Perlengkapan: ABS, AdBlue, Bluetooth, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, program stabilitas elektronik (ESP), riwayat servis lengkap, spion elektrik,

Kondisi: baik (bekas), 100,000 L steel tank. Firefighting / potable water Underground or aboveground installation Dimensions: 16.9 x 3.10 m Wall thickness: 5 mm Weight (8 mm wall): approx. 12 t, weight (5 mm wall): approx. 9 t. The tanks are sandblasted, fitted, and then coated internally and externally with a corrosion-resistant epoxy resin. As standard, the tank features a suction pipe with strainer basket, a ventilation chimney, inlet and outlet connections, a ladder, and a manhole. For an additional charge, we can install a float valve and a shaft chimney. Additional fittings such as a platform can be welded on request. We offer tanks with or without steel bases. Steel bases available for €1,800 net. Nodedbllzjpfx Ahrjdc Tanks come with a leak test certificate and a declaration of conformity. Delivery to the customer is available. We arrange transport to other countries. Free loading on site.

Kondisi: bekas, METTLER TOLEDO Sistem Titrasi / Titrator Laboratorium METTLER TOLEDO Titration Excellence T90 Sistem titrasi otomatis dengan terminal layar sentuh dan unit pendosisan Yang dijual adalah sistem titrasi bekas dari produsen METTLER TOLEDO. Sistem ini cocok untuk aplikasi laboratorium yang menuntut, titrasi otomatis, pengukuran pH/ISE, jaminan kualitas, serta proses analisis kimia. Data Teknis Produsen: METTLER TOLEDO Tipe: Titration Excellence T90 Jenis Perangkat: Titrator laboratorium otomatis / Sistem titrasi Seri Model: Excellence Titrator T50 / T70 / T90 Terminal Layar Sentuh Titrasi One Click® Sistem Modular Koneksi Ethernet Antarmuka USB Sistem CAN-Bus Deteksi sensor dan buret Plug & Play Menurut informasi produsen T90: Hingga 7 penggerak buret tambahan Titrasi paralel dimungkinkan Hingga 30 tugas Hingga 8 tugas yang berjalan secara paralel Urutan serial Kondisi If-Then dalam metode Memori antara hasil Aplikasi menurut informasi produsen: Titrasi asam/basa Titrasi pengendapan Titrasi redoks Titrasi kompleksometri Titrasi fotometri Titrasi konduktivitas Pengaturan pH Pengukuran pH, ion-selektif, dan konduktivitas Titrasi Karl-Fischer Peralatan Unit utama METTLER TOLEDO T90 Terminal operasi layar sentuh Beberapa unit pendosisan / penggerak buret Lengan titrasi / penyangga elektrode Koneksi pH/ISE Koneksi sensor Ndjdozc Ic Djpfx Ahrjc Koneksi Ethernet Koneksi USB Berbagai selang dan kabel penghubung Elektrode / sensor sesuai gambar Kertas uji fluorida Kotak Eppendorf PhysioCare Aksesori sesuai gambar Area Aplikasi Analisis kimia Analisis laboratorium Jaminan kualitas Penelitian dan pengembangan Industri farmasi Industri makanan dan minuman Petrokimia Kimia halus Industri kosmetik Analisis air dan lingkungan Dimensi (L × P × T): 210 × 246 × 250 mm Berat: 20 kg Kondisi Bekas / Used Kondisi visual sesuai gambar Perangkat menyala Layar sentuh menampilkan antarmuka operasi Lingkup pengiriman seperti yang ditampilkan Lingkup Pengiriman 1x Sistem titrasi METTLER TOLEDO T90 1x Terminal layar sentuh Beberapa unit pendosisan / modul pendosisan Lengan titrasi / penyangga elektrode Elektrode, selang, kabel, dan aksesori sesuai gambar Meja yang ditampilkan dalam foto atau barang lain yang tidak disebutkan secara eksplisit bukan merupakan bagian dari penjualan. Pengiriman atau pengiriman ekspedisi dimungkinkan. Perubahan, kesalahan, dan penjualan antara waktu dimungkinkan. Jika ada pertanyaan lebih lanjut, kami akan dengan senang hati menjawabnya melalui telepon.

Tahun pembuatan: 2007, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Special opportunity! Only ONE unit left! We are pleased to offer you this top-quality B 6200 drying oven from the globally recognized brand "Thermo" / "Heraeus" in near-new condition, sourced from government stocks of the State of Thuringia. The B 6200 is one of the most reliable units on the market and is considered indispensable in laboratories worldwide. It is renowned not only for its high precision, but also regarded by experts as one of the most durable and robust devices available. The unit was purchased new by the State of Thuringia in 2007 and has been used exclusively for annual inspections since then. Both visually and technically, the condition is flawless – see photos. This particular unit is notable for its extensive features, which go well beyond the standard configuration. The B 6200 comes equipped with additional safety switches, a programmable timer, and a microprocessor-controlled temperature regulation system. The listed price refers to a single drying oven with the described features and the included shelf as shown in the photos. Technical specifications: Thermo / Heraeus B 6200 Drying Oven Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 l. Temperature range up to 70°C. Fresh air and exhaust connections. External dimensions (W x H x D): 895 x 816 x 715 mm Nedpfjwcznbjx Ahrsdc Internal dimensions (W x H x D): 554 x 644 x 550 mm Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Equipment features: Digital display temperature controller with microprocessor monitoring, over- and under-temperature protection. Programmable timer. Stainless steel inserts. Applications: Microbiological incubation processes in pharmaceutical, medical, and microbiological laboratories; hygiene testing in the pharmaceutical, food, cosmetics industries, and other sectors; long-term storage tests, and more. Sale is exclusively to commercial customers; you will of course receive an invoice with VAT shown separately. Private buyers may acquire the unit "on behalf of a customer"; there is expressly no direct commercial sale to private individuals! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims arising from grossly negligent or intentional breach of obligations by the seller or injury to life, body, or health. Shipping will take place within three business days after receipt of payment via freight forwarding. Alternatively, you can arrange to collect the device during normal business hours by appointment. The total system weight, including accessories and pallet, is approximately 110 kg. If you have any questions, please contact us directly using the provided contact details.

Kondisi: sangat baik (bekas), Band sawmill consisting of: - EWD EW 1000 carriage - EWD EBB 1400 band saw - Outfeed roller conveyor for sawn timber (Manufacturer: SPRINGER) - Elevated operator cabin - Rails - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Vollmer CAL 200 sharpening machine - Vollmer PMH swaging machine - Vollmer EMS side (leveling) grinding machine Nsdpfx Ahjvtwzmorsdc Block Band Saw EWD Esterer EBB1400 Vertical band saw for round timber Roll diameter: 1400 mm Roller width: 200 mm Saw blade width: 206 mm Max. saw blade thickness: 1.47 mm Max. blade speed: 55 m/s (Winter & summer drive pulleys available) Main motor: 55 kW In 2009, the camber on the rollers was reground Band Saw Carriage EWD Esterer EW1000 Hydraulic log carriage Year of manufacture: 1991 4 log clamps With 3 log turners Max. log clamp opening: 1000 mm Max. hook opening: 930 mm Total length: 6000 mm Total width: 2450 mm Total height: 1750 mm Track width: 1300 mm The band sawmill was purchased second-hand in 2004/2005, reinstalled by Esterer, but was never put into full operation, as almost all cutting was done with the frame saw. Since 2004, the band saw has only run for 500 operating hours! Very good condition – immediately available – viewing possible by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year: 2000 Tooth feed from the left CNC automatic machine for sharpening rip and block band saw blades with straight grind and wet grinding Fully enclosed with extraction system For CBN and corundum grinding wheels Incl. 2 borazon grinding wheels 10mm 02. Vollmer PMH swaging machine Automatic saw blade swaging machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS side/leveling grinding machine Leveling machine for tensioned band saw blades, converted to self drive in combination with CAL 200, incl. limit switch at the saw blade clamping! Further details: The sharpening machines were purchased second-hand in 2007 and have been stored covered on pallets or wooden structures in a dry, heated garage. As the band saw was never put into full operation, installation of the sharpening equipment was always postponed, so today the machines are still in the condition as delivered. All operating manuals, descriptions, and wiring diagrams are neatly stored in a box. In 2018 and 2023, the machines were cleaned outdoors to remove surface dust, lightly oiled with graphite spray, and then stored back in the garage! Immediately available – fully functional – very good condition Location: Austria, near St. Pölten

Kondisi: bekas, Have we piqued your interest? Then feel free to register on our homepage – we look forward to hearing from you! Your Maschinen Besmann Team For sale: Amada Promecam GTH 420. The machine was manufactured in France. Thanks to its compact size, it is also suitable for smaller workshops. Amada Promecam 420 GTH Guillotine Shear Ndodpfeztw Hxox Ahrec Manufacturer: Amada Model: Promecam 420 GTH Condition: used Cutting length: 2000 mm Material thickness: 4 mm (steel) Backgauge: electric, 750 mm Motor power: 5.5 kW Weight: approx. 3,300 kg

Kondisi: bekas, Tahun pembuatan: 1985, Pressing force: 63 t Passage width: 1350 mm Stroke: 300 mm Total power requirement: 16 kW Machine weight approx.: 10 t Njdpfx Ajt Hwxuohrjdc Space requirement approx.: 2.0 x 1.8 x 3.4 m HYDRAP Hydraulic double-column press (embossing press with sliding table) Type: HPDb 63 Year of manufacture: 1985 Serial no.: H 40/5273 Pressing capacity of upper ram: 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without tool changer): approx. 400 mm Stroke speeds up/down / full load: 400/400 or 16 mm/sec Clearance between uprights (front): 1350 mm Clearance between uprights (side): 350 mm Ejector in ram pressure/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx. 16 kW - 380 V - 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ shuttle table) Accessories / Special equipment Stable double-column frame press with adjustable quadruple prism guides, equipped with: • Hydropneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces, which accommodate the pressed parts and the lower tool, position them under the ram, and after the pressing operation transport them to the rear onto a stacking device. The table then returns to the starting position. This system can be easily removed or modified. • CNC press controller (Siemens S5) with monitor for input of all relevant process data or for saving tooling data, allowing for easier and faster machine setup and for monitoring part transport. Shuttle table holder. • SICK light barriers fitted at the front press area/ loading station. • The ram is equipped with an electromechanical depth stop (300 mm stroke) and hydraulic tool clamping device, as well as integrated hydraulic ejector. • Displays for pressure and oil temperature, part counter, foot switch, two-hand release, central lubrication, hydraulic oil flow cooling, free-standing electrical cabinet, etc. The machine was used for pressing edge trims on cylinder head gaskets. Condition: Good to very good – demonstration ready, under power Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1978, Zulässige Hubzahl in Relation zum Mat.-vorschub bei 300 mm = 40-60 Hübe 150 mm= 120 Hübe Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Type AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, ohne Grube). Blechband führt über die Abrollhaspel hinweg zum einseitigen Zangenvorschubapparat und dann in die Maschine. • HEILBRONN Coilabwickelgerät Type HAEMH 4000/500 S #204753 mit Coilablage- Platz, in welchem das Coil aufgegriffen und gespannt wird und dann wieder in Zurück in Position fährt, max. Coilgewicht 4000 kg, Coil-Ø max. 1500 mm, max. Nedpfjt Hwz Njx Ahrsdc Bandbreite 500 mm, • angebauter Richtapparat für maximale Blechbreite 400 mm, die Blechführung ist In der Breite verstellbar, Blechstärke verstellbar 1-3 mm • automatische Öl-Umlaufschmierung mit Überwachung, • hydr. Überlastsicherung, motorische Stößelverstellung 125 mm • Förderband für die fertigen Pressteile, separater Schaltschrank -1990 modernisiert- Admissible number of strokes in relation to material feed: 300 mm = 40–60 strokes, 150 mm = 120 strokes. Accessories/Special Equipment: • FREI / WEINGARTEN straightening unit, type AMR 04 So, with subsequent overhead loop control (space-saving, no pit required). The strip runs over the decoiler to a single-sided gripper feed unit and then into the machine. • HEILBRONN coil unwinder, type HAEMH 4000/500 S #204753, with coil storage station, where the coil is picked up, clamped, and then moved back into position. Max. coil weight 4,000 kg; max. coil diameter 1,500 mm; max. strip width 500 mm. • Integrated straightening device for max. sheet width 400 mm, adjustable sheet guide width, thickness adjustable 1–3 mm • Automatic oil circulation lubrication with monitoring • Hydraulic overload protection, motorized ram adjustment 125 mm • Conveyor belt for finished pressed parts, separate control cabinet – modernized 1990.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar kertas (min.): 2.100 mm, tinggi kertas (maks.): 120 mm, panjang total: 3.300 mm, lebar total: 3.500 mm, tinggi total: 2.100 mm, Bürkle LFC 2100 Liquid Coating System Object: For liquid sealing of digitally printed media. Suitable for the application of primers or protective coatings, as well as for full-surface finishing of digitally printed media in continuous operation using solvent-free UV coatings and direct curing by means of UV radiation from above. Condition: As new (purchased in 2023) Availability: Immediately Short description: For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was purchased new in 2023 via Welte and has only been used for a few operating hours since then. It is in excellent visual and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with exhaust system, as well as a second roller (smooth roller). Ndedpey Szwuofx Ahrsc Technical Data & Highlights: - Maximum working width: 2,100 mm - Substrate thickness: Flexibly adjustable up to 80 mm - Feed speed: Infinitely variable (up to 25 m/min) - Drying: Includes high-performance UV drying unit (TRUV) for immediate downstream processing - Control: Modern control panel for precise process management Price: €150,000 (negotiable) plus VAT | ex location (EXW) Contact & Viewing: The system is still assembled and can be viewed and tested under power by appointment. (Location: St. Martin bei Lofer, Austria)

Kondisi: bekas, Tahun pembuatan: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply for the filling tank via vacuum blower. For filling, bottles are first raised by hydraulically operated bottle carriers and pressed against the sealing cone on the filling valve. The valve sleeve moves to the stop in the valve body, opening the product outlet. The air inside the bottles is expelled through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the liquid level in the tank. The product flows by gravity into the bottles until the fill level reaches the air tube. The bottle is then lowered, closing the product outlet. Machine (Additional): Hot filling Nedpfxjw Tmmvs Ahrjdc Filling line capacity: 5,000 bottles/h Number of filling valves: 24 units Length: 1.64 m Width: 1.20 m Height: 2.10 m Formats: round bottles, diameter 60 – 92 mm, height 100 – 265 mm Direction of operation: left to right Features: 24 stainless steel filling valves, height adjustment, vacuum blower

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, A lifting, tipping, and sorting system for bulk materials within mesh boxes is available. The system lifts the mesh boxes to a height of approximately 3-4m, tips them into a transport vibrator, and the parts are then fed to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000 kg, pressure: 140 bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024. Ndjdpfx Ahjuxdhhjrsc

Kondisi: bekas, Tahun pembuatan: 2021, Overview: The tangential filtration system was built in 2021 by the Spanish company Sefiltra and was used for beer filtration. The owner had purchased all the equipment to set up a microbrewery, but then decided to outsource his beer production to a larger brewery. Technical Details: - Filtration system is mounted on a stainless steel frame with castors - Control system: Siemens S7 - 4 filter cartridges - Recirculation pump - CIP connection options - Filters particles from 300 µm Ndjdpfx Ael Hxnxehroc

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 2.000 mm, beban meja: 6.000 kg, diameter spindel: 110 mm, kecepatan spindel (min.): 5 rpm, kecepatan spindel (maks.): 1.120 rpm, tinggi total: 4.300 mm, panjang total: 7.200 mm, lebar total: 4.600 mm, panjang meja: 1.600 mm, lebar meja: 1.400 mm, panjang langkah makan poros W: 800 mm, jenis arus masuk: AC (pendingin udara), langkah spindel: 800 mm, berat keseluruhan: 26.000 kg, tahun perombakan terakhir: 2020, For sale: Horizontal Boring Mill Union Gera BFT 110/6 The machine is from approx. year 1980 and underwent a general overhaul by us in 2009/2010. Since then, it has been under our maintenance. Scope of the overhaul included, amongst others: - Electrical system almost completely renewed - New control cabinet with Siemens S7-200 PLC - New drive technology: Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 contouring control + electronic handwheel - Heidenhain linear measuring systems on X, Y, and Z axes - Heidenhain angle encoder on B-axis (rotary table) - Spindle drive: three-phase asynchronous motor with DC braking electronics - Renewal / overhaul of all hydraulic components - New ball screws on X and Y axes - Overhaul of the drive systems for all feed axes - All axes have been newly hand-scraped - Overhaul of the lubrication systems for the axes and spindle box - Replacement and overhaul of the gearbox components in the spindle box Further technical details can be found in the photos or upon request. Machine equipment: - Heidenhain TNC 124 contouring control + electronic handwheel - Facing slide (U-axis) - Electric tool clamping system SK 50 Sale due to capacity reasons. The system is fully functional and immediately available. It achieves manufacturing accuracies according to the manufacturer’s protocol. Technical documentation is available. The machine is fully operational and can be inspected under power by prior arrangement. Offer is subject to confirmation as per our terms and conditions of business and delivery. Errors and prior sale excepted. As warranty for used machines is excluded, we recommend our customers to inspect the machine before purchase. Payment, as is customary for used machines, is to be made in advance via bank transfer prior to delivery. Disassembly, relocation, installation, commissioning, and geometric alignment at the new location can be arranged by us upon request. We will be happy to provide a separate offer for this. Ndsdpfx Asu U Hvwohrec Delivery of the machine within the EU is possible upon request.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, UNION CM10 SP TWIN Double chamber: Chamber no. 1 for washing, no. 2 for cooling, both equipped with 3 pneumatic doors. “Through-feed” type: the baskets are loaded on one side and unloaded on the opposite side, performing the full cycle. Parts are loaded with a mobile trolley on the washing chamber side, pass through the cooling chamber, and are then unloaded from the cooling chamber side. • Automatic transfer between chambers via shuttle device. • Basket rotation with safety clutch. • Capacity to load baskets with ø1060mm (useful internal diameter 980mm). • Useful internal height 1000mm. / Max. capacity 500 kg. • Washing tank 280 L with automatic level control and axial washing pump in stainless steel. • Dosatron detergent dispenser on washing tank, 3-10%. • Rinsing tank 250 L with automatic level control and axial washing pump in stainless steel. • System constructed in AISI 304, except for ground safety tray, external structures, and paneling (painted steel/coated steel). • Safety tray at the base of the plant. • Full thermal insulation. • 2 external trolleys with drip tray + 2 baskets ø1060mm, useful internal 980mm. • Automatic doors with safety barriers. • 3 bag filters (2 on washing, 25 micron – 1 on rinsing, 10 micron). • “Union DC60” oil separator. • High-pressure blower, with positioned side air knife. • Drying fan with electric heating elements. • Fume/vapor extractor. Ndedor Duq Ujpfx Ahrsc • Draining pump. • 2 cooling fans. (Water chiller NOT included in the offer). • SIEMENS S7-1200 PLC with KTP 700 BASIC touch panel + Gate Manager for remote assistance.

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Throughput: 600 l/h. In the process, the product (milk, cream, liquid egg, ice cream mix, etc.), which is preheated to 65°C in counterflow, is brought to 130°C in less than one second by means of steam injection. It is then cooled down again in a very short time through vacuum expansion. Further cooling is achieved via the incoming product in counterflow and with ice water. The system includes a feed tank, speed-controlled pumps, homogenizer, preheater, infusion vessel, expansion vessel, steam condenser, cleaning agent tank, and other components. Inspection on site is possible. Ndedporp E Nkefx Ahrsc

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, jam operasional: 8.416 h, daya laser: 3.200 W, ketebalan pelat baja (maks.): 10 mm, tebal plat aluminium (maks.): 4 mm, Diameter pipa (maks.): 152 mm, panjang kerja: 6.500 mm, TRUMPF laser tube cutting system with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness steel: 10 mm Material thickness stainless steel: 5 mm Material thickness aluminium: 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Ndedpfx Aheygu Tkerjc Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle chute - Sturdy machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatic retractable rollers - Pass-through chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished parts up to 3 m in length - Finished part tube support with extendable guide rollers - Scrap conveyor belt with container - Enclosed beam guidance - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic on/off function - Ergonomic control panel with touch color screen - Work area lighting - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head with 155 mm focal length - ControlLine - Easy operation - Online help - Diagnostic functions - Integrated technology data - Teleservice via internet - RJ45 network connection and USB port - CE marking - Multi-beam light curtains - Monitoring system incl. for gas pressure, temperature, and cooling water - Compact extraction unit - Protective enclosure with Makrolon panels - Clamping jaw sets with clamping ranges 20-85 mm and 85-152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to circumscribed circle 85 mm) - Quick-change forming shells for rectangular tubes (up to circumscribed circle 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with internal detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – pass-through chuck, small circumscribed circle - Adaptive clamping technology – pass-through chuck, large circumscribed circle Note: The machine will be dismantled on 02.03.2026 and can be inspected under power until then.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2019, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 19101105, lebar rol: 1.100 mm, Perlengkapan: Pelat tipe tersedia, riwayat servis lengkap, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine designed for both cold and hot lamination. It is intended for single-sided film lamination of paper, with the laminated web subsequently rewound onto a roll. For cold lamination, the film is coated with a water-based adhesive and dried using a heated roller with a hot air drying system. The unwinding system feeds the paper into the lamination section, where, through heat and roller pressure, the film is bonded to the paper. The rollers feature a heated water circulation system with consistent temperature control. The paper roll is secured by shafts controlled by a pneumatic brake. The paper is unwound and fed into a web aligner equipped with automatic web-guiding to ensure precise film lamination. During lamination, film without adhesive is coated with water-based glue and then dried by a heated cylinder, or pre-glued film is unwound directly onto the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is bonded to the film through heat and pressure, applied by the lower rubber roller that presses the paper and film against the cylinder. The laminated web is then rewound onto a core in the take-up section, ready for further downstream processing. SDFM-1100 Specifications Maximum roll width: 1100 mm Maximum roll diameter: 1100 mm Paper weight: 80 - 500 g/m² Film thickness: 10-50 microns Operating speed: 10 - 65 m/min Electric voltage: 380V 50Hz Total power: 78 kW Ndjdpfx Aovy Aipjhroc Maximum energy consumption: 30 kW Total weight: 8,000 kg Machine dimensions: 10,130 × 2,130 × 2,960 mm

Kondisi: baru, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15VWL1032, The machine comes with tooling for producing electrical connectors in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 The offer also includes original MSA drawings. Ndsdpsu Itk Rofx Ahrjc The VWL 1200 is a vertical three-axis CNC machine for the placement of electrofusion fittings, designed for handling medium to large-sized fittings or pipes. The machine can typically produce fittings within an internal diameter range of 250 to 1400 mm (1400 mm SDR17). Optionally, a 2-axis CNC drilling unit is available for drilling fusion indicator holes during the wire laying cycle or for drilling terminal holes during the external profiling cycle. The VWL 1200 uses specialized fixtures that clamp onto an innovative element, which is an integral part of the coupling's structure; thus, each half of the coupling has a separate melting zone. The wire laying process starts at one terminal at the end of the coupling. The wire is laid at double the required pitch to the end of the fusion zone, after which the tool system rotates and then moves in the opposite direction between the first laid pitch up to the rest position at the second terminal. The process is completed in the second part of the coupling. The VWL 1200 system is designed to enable loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine features a completely open top, allowing for easy overhead loading via a gantry system. Alternatively, parts can be loaded through the exceptionally wide operator door using appropriate gripping and handling equipment.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, The cartons are taken from the flat box machine's chute, stacked manually, and pushed onto the infeed conveyor of the US-2000 TRC 900. Within the unit, the stack is precisely aligned three times using side guides and a front stop, then pressed and banded. For the second banding, the front stop shifts automatically to the next position, which is set via the display. A servo-driven conveyor motor enables customized strap tensioning for gentle, edge-protecting banding of high-quality carton stacks. Cycle output up to 22 stacks per minute. Njdpevcyw Aefx Ahrjdc