Beli Pack-Tec Gmbh Pallettierung bekas (74.113)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, daya: 1,5 kW (2,04 hp), asm-150-de-to-hu-20240613 Kedey Sixmjpfx Acgjlw

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Kjdpfx Asytr Swecgelw

Kondisi: baru, *Technical Specification: -Air-cooled, 25.5 kW rated at +10°C supply temperature at an ambient temperature of +32°C -Temperature range supply: +5°C to +30°C (Optional lower temperatures down to -5°C possible) -Air volume: 8,000 m³/h -Max. air inlet temperature: +30°C -Optional heating capacity up to 24 kW *Pumps: -Delivery rate up to 150 l/min -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -Unladen weight: approx. 480 kg -Process medium connection: DN 32 internal thread *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -SBC-T control and regulation unit -Display for setpoint and actual value, alarm indicator -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve in accordance with DIN EN 378 -Power control -Frost protection monitoring Kljdpfx Ajg Ewwrecgsw -Flow monitoring -Grill cover over condenser -Oil sump heating -Drain facility -Level monitoring via float magnetic switch -Installed dirt trap in return line of process medium -Bypass valve between supply and return as pump protection, factory set -High and low pressure limiter according to DIN EN 378 -Stainless steel tank, capacity: 80 litres, open system, fully insulated -Self-supporting housing with castors, mobile -System for indoor installation -Control cabinet IP 54 Other performance classes available on request. Visit our homepage for more details. *This unit complies with European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requirements deviating from the standard are shown in quotations or order confirmations.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, EN Kljdoy Nxnlepfx Acgow

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, rentang pengukuran sumbu X: 500 mm, rentang pengukuran sumbu Y: 500 mm, rentang pengukuran sumbu Z: 300 mm, Perlengkapan: dokumentasi / manual, pencahayaan, AIM coordinate measuring centers are the technological successors of the globally deployed Mahr multisensor coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Max. workpiece weight: on glass plate approx. 40 kg Accuracies: U1=1.9 + L/200 U2=2.4 + L/150 U3=2.9 + L/100 (L= measuring length in mm) Higher accuracy available on request Travel speed: 200 mm/s Acceleration: 400 mm/s² Scale resolution: 0.0001 mm Multisensor unit (MSH): optical/tactile/laser -Includes high-precision USB camera with 2-step zoom and telecentric optical path -Includes PTL01 TTL point laser, high-precision, telecentrically coupled -Includes Renishaw TP200 integrated tactile probing system, expandable as an option -Includes Quad-Light LED power ring light, programmable incident light -Includes LED power transmitted light -Includes Nikon precision lens 5x (optionally 3x, 10x, 20x, 50x) C-mount technology -Includes calibration standard with factory calibration certificate, consisting of glass plate “circle,” calibration sphere, and setting ring Ksdpog Ewk Refx Acgelw -State-of-the-art PT200 CNC controller system in a robust industrial-grade control cabinet -PCI-BUS system for fast internal data transfer during real-time operation -19" pull-out controller rack for optimal service access -Modular controller design, open for future upgrades and retrofits -Service-optimized controller layout for quick access and short service times -Integrated 64-bit broadband bus technology with real-time data transfer -4-channel online temperature compensation preparation “on board” -Active safety technology for drives, light management, and sensor systems -Online remote connection for remote maintenance and online system checks -LS circuit breakers for rapid troubleshooting during service -Firmware adaptation for volumetric 3D full error compensation Includes powerful OptiCheck3D 5.0 software Commissioning, training and start-up support (programming) available as a special package!

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, tekanan (maks.): 250 batang, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for complex geometries to perform right- and left-hand bends. Plug-in bending tools allow for quick changeovers to different tube sizes. A rapid hydraulic system to minimize non-productive times is an important factor for series production. The clamping pressure for the tube can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can accommodate an almost unlimited number of programs storing bending angles, lengths, and rotation angles for up to 50 bending sequences on a single tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In 'Simple Bending', the length and rotation of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is pre-set and a continuous setpoint/actual comparison is performed during bending operations. This excludes mispositioning within a tolerance window, effectively minimizing operator errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically activated upon reaching the bending angle. The compact drive unit with removable mandrel support offers benefits for on-site assembly as well as for special constructions with very long tube in-feeds and is also available as a stationary version with a tool and mandrel bar organizing system. A cost-effective alternative to fully controlled CNC machines. POTENTIAL APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant construction, e.g. for the chemical industry • Metal fabrication • Prototype construction Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10mm/140mm • Min. bending radii: 1.5 x Ø (Standard 2 x Ø) • Multifunction machine control with bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (longer versions available upon request) Klsdpfx Acong Exajgew • Maximum 180º bending result • Weight 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for clamping force supervision • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • You are welcome to join us for test production at our in-house demo room • Consulting and informational meeting at your site • Consultation and handling of leasing/finance purchase via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, radius tekuk (min.): 9 mm, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. Klsdpfx Acondn Agegjw The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility Kodpfxenh R Ekj Acgjlw

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis aktuasi: listrik, Diameter pipa (maks.): 35 mm, Ketebalan dinding tabung (maks.): 2 mm, Sudut pembengkokan (maks.): 360 °, radius pembengkokan (maks.): 150 mm, radius tekuk (min.): 32 mm, berat keseluruhan: 28 kg, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction • Plumbing and heating installation • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request Kljdpfx Aenfvx Nscgjw OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: The compact bending machine enables precise and repeatable bending up to an external diameter of 100 mm, both in stationary operation and directly at the installation site. Transport can be carried out using a pallet truck or with the optionally available rollers. A robust three-phase motor and precision gearbox ensure powerful drive performance. The machine stands out due to its compact and slim design as well as the exceptionally open bending area. Direct position detection on the bending axis guarantees optimal bending accuracy. Bending angle adjustment is quick and simple via a user-friendly, menu-driven interface available in 14 languages with touchscreen control, ensuring even more intuitive operation. Up to 100 bending programs can be stored for complex bending tasks, each supporting a sequence of up to 8 bends per geometry. The multifunctional control system allows variable adjustment of bending speed for forward and reverse motion, with a parameterizable overbending function to compensate for material springback. Using the four material characteristic curves, the machine automatically overbends the material to the required angle, thus ensuring highly precise results. The “stationary tube and rotating tool” principle minimizes the machine’s footprint. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to make bends with minimal deformation, for example, in stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square, and round iron profiles can be bent with ease. The KBV small radius bending device attachment allows extremely tight bending radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Serpentine bending • Prototyping • Plumbing and heating installations • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase current 400 V • Bending radius up to 500 mm • Multifunctional machine control, bending angle setting (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight 600 kg Kjdpsndk N Aofx Acgolw OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii from 45 mm, incl. 40 mm hex shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small bending device • Special tools according to specifications • Software adaptations for special applications OUR SERVICE: • You are welcome to visit our demo room for test production • Consultation and information meeting at your site • Consulting and handling of lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, nomor mesin/kendaraan: 1018, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: manual, jenis aktuasi: listrik, Diameter pipa (maks.): 50 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 3 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction Klsdsnfvy Uspfx Acgow TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º Kedpfxsng Amkj Acgslw OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm Klodong A R Sspfx Acgsw • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 8 mm, Sudut pembengkokan (maks.): 195 °, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for pipe diameters ranging from 15 to 100 mm, enabling the processing of complex geometries with standard bending radii of 2xD. Depending on material quality and wall thickness ratios, radii as tight as 1.5xD can also be reliably achieved in series production. The 120 mm tool height provides ample scope for special profiles. The highly precise and powerful electric drive of the bending axis, combined with the robust, rigid construction of both the mandrel holder and bending arm, ensures optimal bending results. Quick-change bending tools allow for rapid conversion to different pipe sizes. The clamping pressure for the pipe holder can be optimally adjusted. The PLC control (expandable via USB stick) comes with data storage and the latest X2X interface and can store virtually unlimited programs for bending angles, length dimensions, and rotation angles for up to 50 bending sequences per pipe length. An easily programmable database monitors springback values for up to 200 materials. The control has two operating modes: In 'Simple Bending', the length and twist of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is preloaded, and a continuous target/actual comparison is carried out during bending. Also available with pneumatic rotary stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemicals industry • Hydraulic piping • Metalworking • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min/max bending radius: 40 mm / 250 mm • Min bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel holder lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600–3200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic minimal-quantity mandrel lubrication • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake function or via manual stops with foot switch • Semi-automatic length and rotation positioning via servomotors • Automatic tool retraction • Pipe calculation software • 10-inch touchscreen with integrated pipe calculation Kodpfsnh R Suex Acgelw • Data transmission via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to trial production in our in-house demo room • Consultation and information meeting at your site • Consulting and handling of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm—either stationary or directly at the assembly site. A robust three-phase motor and precision gearbox ensure powerful drive performance. Position detection directly on the bending axis provides optimal bending accuracy. Setting the bending angle is quick and easy via a user-friendly, menu-driven touchscreen interface, ensuring even more intuitive operation. For more complex bending operations, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction controller allows variable adjustment of the bending speed for forward and return movement, and features a programmable overbend function to compensate for material springback. Utilizing four material characteristic curves, the system automatically overbends the material to the required bending angle, delivering highly accurate bending results. The “stationary tube, rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to produce bends with minimal deformation in materials such as stainless steel and copper. With the PB20 profile bending attachment, flat, square, and round bars can be easily bent. The KBV small-radius bending device allows for extremely tight bend radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Meander bending • Prototype construction • Plumbing and heating installation Klsdpfong Ax Ssx Acgjw TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Min./max. bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with 0.1° angle adjustment • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Roller bender RB43 – mounts on the hex shaft of the bending axis. By switching to continuous bending mode, the bending system acts as a drive unit. • Small-radius bending device KBV • Special tools available on request OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and information session at your premises • Advice and processing of leasing/financed purchases • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baik (bekas), Tahun pembuatan: 1988, nomor mesin/kendaraan: 40 / 670, Fungsionalitas: belum diuji, -KOM 853- Offered here is a Unifil air purifier from ILT Industrie-Luftfiltertechnik GmbH. The unit is in used condition and has not been tested for functionality. Manufacturer: ILT Industrie-Luftfiltertechnik GmbH Model: U40 Serial No.: 40 / 670 Year of manufacture: 1988 Voltage: 80 V Current: 3.3 A Frequency: 50 Hz Klodpfx Ajw Ehzyocgew

Kondisi: baru, Eurotec Innovation TV25-M – Mobile Vibratory Finishing System / Trough Vibrator (Made in Germany) The TV25-M from Eurotec Innovation is a compact, mobile all-in-one solution for professional vibratory finishing – ideal for deburring, grinding, and polishing a wide range of workpieces. Klsdpfx Aohmp Dqscgew Thanks to its well-designed system configuration, all necessary components are space-efficiently integrated on a mobile cart. This makes the unit highly versatile and immediately ready for operation. Type: TV25-M TROUGH VIBRATOR Manufacturer: Eurotec Innovation GmbH Gross Volume: 50 liters Advantages: ✔ Mobile turnkey system – all components integrated on one mobile cart ✔ Plug & Play – simply connect to 230V and start ✔ Integrated process water treatment (cascade system) ✔ Sieve box for automatic separation of workpieces and media ✔ Sound-insulated design for quiet operation ✔ Programmable control unit with timer and frequency adjustment The U-shaped trough design allows for processing larger and elongated workpieces while maintaining a compact footprint. ⚙️ Technical Data: Gross volume: approx. 50 liters Usable volume: approx. 36 liters Internal dimensions of processing container: Length: 600 mm Width: approx. 275 mm Height: 325 mm Power supply: 230V Output: approx. 0.5–1.0 kW 🏭 Fields of Application: Deburring of metal and plastic parts Polishing and surface finishing Processing of single parts up to small batches Ideal for industry, workshops, and contract manufacturers Ideal application areas: Metalworking Deburring & Polishing Workshops & Production The TV25-M is the perfect solution for businesses seeking a flexible, space-saving, and immediately-ready vibratory finishing system – offering maximum efficiency with minimal space requirements. Additional versions and special configurations available upon request. From development to production, we supply all products from a single source – all "Made in Germany". ----- Simply contact us – we’re happy to advise you without obligation. ----- The European Commission provides an online dispute resolution (ODR) platform for out-of-court settlements. This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging portal), during which we first provide you with a non-binding quotation, also informing you of our general terms and conditions and your right of withdrawal (including legal disclosure) before any purchase or contract is concluded.

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan mesin pameran ini, SM Innotech Laminator Incapcell 35-18, tahun pembuatan 2018. Produsen: SM Innotech GmbH & Co.KG Model: Incapcell 35-18 Tahun pembuatan: 2018 Kondisi: mesin pameran ID Kategori: 33 Jenis mesin: Laminator Tersedia 2 unit mesin ini, keduanya masih baru karena belum pernah digunakan. Kledpfx Asy Druuscgew Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Tahun pembuatan: 2019, Kondisi: bekas, Kami menawarkan Laminator SM Innotech GmbH & Co.KG Incapcell 22-18 bekas ini, tahun pembuatan 2019. Mesin ini memiliki jam operasi yang sangat sedikit karena digunakan sebagai mesin percobaan untuk tujuan pengujian. Pembaruan perangkat lunak individual atau modifikasi lain dapat dilakukan sesuai permintaan. Mesin siap dikirim segera. Kedpfoy Dq D Iox Acgolw Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Tahun pembuatan: 2022, Kondisi: siap digunakan (bekas), de2hu2it2lt-001 Kedpfx Aoy Ax Ufocgslw

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LAS 23 mit integrierter Absaugung, The LAS 23 portable is a compact and mobile fiber laser designed for flexible direct marking of a wide variety of workpieces directly at the place of use. Thanks to its rollable base frame, the system can be deployed independent of location and can be easily moved to hard-to-reach or large-volume workpieces. This makes it especially suitable for applications where a stationary laser cell is not practical. The modular design with customized attachments allows for rapid and tool-free adaptation to different workpiece geometries. The quick-change system enables fast replacement of attachments—ideal for varying marking tasks in production and maintenance. Kljdpfx Ajvyc Rmocgew The integrated laser software supports the creation of texts, serial numbers, 2D codes (e.g., DataMatrix, QR codes), and graphic elements (e.g., logos) via a user-friendly interface, which can be operated without programming knowledge. Serial and article numbers can be incremented automatically. In addition, there is the option to import variable data—such as drawing numbers or project identifiers—from external tables (e.g., CSV/Excel files) and automatically integrate them into the marking template. Optionally, a handheld scanner can be connected for fast data acquisition, reducing manual input and increasing process reliability. Made in Germany • 20W fiber laser (optionally 30W, 50W) • Laser class 1 • CE-compliant according to EU directives • Wavelength: 1064nm • Marking field size: 70x70mm (optional: 110x110mm) • Signal light on handpiece to indicate operating status • Marking software EZCAD (other software options on request) • 230V mains connection • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of the portable laser unit: 2.8 kg • Fiber optic cable: approx. 2.50 m • Integrated extraction system

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036679, gaya penjepit: 1.600 kN, diameter sekrup: 40 mm, volume langkah: 393 cm³, tekanan injeksi: 1,892 batang, berat injeksi: 358 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 500 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 9.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, allowing you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine is suitable for diverse applications, such as packaging, electrical and electronics industries, medical technology, and automotive sector. Your advantages: – Optimised price-performance ratio for a wide range of applications – High energy efficiency due to the all-electric machine concept – Ability to meet demanding delivery deadlines thanks to a base machine concept with a broad spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, YOM 2013) CONTROL SYSTEM ■ MC P1 with 15” TFT colour display, multitouch functionality CLAMPING UNIT ■ Clamping force: kN 1600 ■ Max. mould opening force: kN 120 ■ Clear space (H x V): mm 570 x 520 ■ Mounting platen size (H x V): mm 770 x 720 ■ Mould installation height min. - max.: mm 200 - 500 ■ Max. opening width: mm 950 ■ Max. mould opening stroke: mm 450 ■ Ejector drive: electric ■ Ejector stroke: mm 100 ■ Ejector force fwd/back: kN 33 / 33 ■ Ejector speed fwd/back: mm/s 300 / 300 ■ Max. mould weight: kg 1200 INJECTION UNIT ■ Screw diameter / type: mm 50 / standard ■ Effective L/D ratio: 20.2 ■ Injection pressure: bar 1892 ■ Shot volume: cm³ 393 ■ Shot weight at max. stroke for PS: g 358 ■ Injection speed: mm/s 200 ■ Injection flow rate: cm³/s 393 ■ Screw drive/speed: rpm 267 ■ Plasticising capacity (standard screw): g/s 36.5 ■ Nozzle contact force: kN 42 ELECTRICAL SPECIFICATIONS ■ Connected load: kW 31.2 ■ Installed heating capacity: kW 15.5 ■ Power supply: V / Hz 400 / 50, 3 phases with neutral DIMENSIONS & WEIGHT ■ Net weight incl. electrical cabinet: t 9.7 ■ Length x width x height: m 5.65 x 1.82 x 1.95 Ksdjyzz Iropfx Acgolw ADDITIONAL EQUIPMENT ■ Wear-resistant plasticising unit ■ BluePower full insulation of plasticising cylinder ■ Open nozzle ■ Air valve 1-fold (BWAP) ■ Pneumatic hot runner shut-off control 1-fold ■ Electrical interface for pneumatic cascade 4-fold ■ Euromap handling interfaces E18 + E67 ■ Euromap interface (central computer) E67, E77 ■ Water manifold 4-fold ■ Electrical pre-wiring for hydraulic auxiliary unit ■ Automatic central lubrication ■ Adaptive Process Control (APC) ■ Injection compression moulding circuitry ■ Graphic analysis package ■ Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, S&F Vibrating Screen Machine | Screen Machine Type ASM-200 used (inspected) with tested bearings (flange-mounted bearings) and tested universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Ksdpfjy Aa Ugjx Acgolw Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screen area: 2.0 m² per mesh size Screen decks: 1 unit Mesh size: - 1st screen deck: perforated plate screen, D = 5 mm Drive capacity: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red incl. Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 incl. extension feet L = 1,100 mm incl. hopper extension and slide gate Suitable, among others, for screening the following bulk materials: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screening machine | Oscillating screen | Flat deck screen | Vibratory screen | Roller separator | Screening machine for wood chips | Screening machine for CHP stations

Kondisi: bekas, Central extraction system, room air filtration unit ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture: approx. 2005 Airflow: approx. 5,000 m³/h Extraction connection at filter inlet: 1,200 x 150 mm Exhaust connection at filter outlet: 400 x 300 mm Motor power: 10 kW Kedpfjicic Hjx Acgslw Electrical connection: 400 V, 50 Hz - Control cabinet for wall mounting - Bag filter - Service hatch for filter replacement - Radial fan mounted at the top of the unit Space requirements (L x W x H): 2,000 x 1,650 x 3,650 mm Transport height without fan: 3,100 mm Weight: approx. 2,000 kg In very good condition

Kondisi: bekas, Rotary indexing table, rotary transfer table with 16 stations Rotary indexing automation + TOX hydraulic press Special-purpose rotary indexing machine with multiple assembly/configuration stations Production and assembly system with rotary indexing operation From special-purpose machine manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - Large WEISS rotary indexing table, type TC500, with 16 stations - Press station with TOX power package - Vibratory bowl feeder - Conveyor belts - Inspection stations Kljdpfx Asgd D U Eocgsw - Some stations shown in the pictures have already been disassembled Required space (L x W x H) approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg Everything in as-new condition – The system was never used in serial production.