Beli Ermak Ap 2600-80 bekas (20.560)

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 18.642 h, daya: 85 kW (115,57 hp), tipe perpindahan gigi: otomatis, contact-emal-jaweed-for-more-information Forklift / Front Loader, Linde H80D-03/900, Year of construction: 11/2020, Operating hours: 18,642 h, Power (kW / hp): 85 / 116, Drive type: Front-wheel drive, Length: 5,830 mm, Width: 2,250 mm, Height: 4,400 mm, Weight: 14,602 kg, Payload: 8,000 kg, Perm. total weight: 22,602 kg, Front axle with dual tires, Full cabin, Reversing camera (cab, 115°), Camera on lift mast (90°), Auxiliary hydraulics on mast side, Standard lift mast, Fork carriage GT 1800 mm (7-8 t), Dual pedal control, 12-volt socket, Air conditioning, Hot water heater, Radio / USB / Bluetooth. Other information: * We offer over 200 units for sale. Bodjx R Ub Dspfx Am Ielg * Our location is 30 km north of Frankfurt/M Airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for printing or typographical errors. * Subject to errors and prior sale. * Trade-in possible! * The Jaweed GmbH general terms and conditions (AGB) apply exclusively to vehicle/machinery purchases. * Further information and our terms and conditions are available on our website.

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 329 h, nomor mesin/kendaraan: GS4613C-11442, leergewicht-2469-hubkapazitat-454-arbeitshohe-1000-bereifung-50 Blodpfx Asw Dycyem Isg

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 362 h, nomor mesin/kendaraan: GS4613C-11436, leergewicht-2470-hubkapazitat-454-arbeitshohe-1000-bereifung-80 Bjdpfxow Dycmo Am Iolg

Kondisi: bekas, Detail teknis: Lebar: 905 mm Kedalaman: 1200 mm Tinggi: 2600 mm Berat mesin kira-kira: sekitar 4,0 t per sudut Tersedia dua buah sudut penjepit (clamping angle) seperti ini untuk dijual. Bahan dari baja, permukaan dimesin halus Slot-T sesuai DIN 650: Blsdeval Nrspfx Am Ieg a=22; h=36; b=39; c=17,5 mm, jarak sumbu slot-T ke slot-T = 250mm Penjepitan kaki dengan 4x lubang panjang Ø 21 x 30 mm Pada dinding samping (kiri-kanan) masing-masing terdapat 4 lubang M24

Kondisi: baik (bekas), Motor listrik, motor tiga fasa, motor pulley - Produsen: Birkenbeul, motor listrik tipe 8APE80M-2 - Daya: 1,1 kW - Kecepatan putar: 2885 rpm - Poros: Ø 19 x 35 mm - Bentuk konstruksi: B5 Blodet Rmacjpfx Am Ijg - Kelas perlindungan: IP 55 - Dimensi: 325/220/T200 mm - Berat: 12,1 kg

Kondisi: baik (bekas), Gear motor, electric motor, geared electric motor -Speed: 7.77 rpm -Power: 0.75 kW -Design: B5 -Hollow shaft diameter: 42 mm -Protection rating: IP44 -Quantity: 1 motor available Bodpfx Aocmh H Ssm Ijlg -Dimensions: 580/240/H300 mm -Weight: 56 kg

Kondisi: bekas, Electric Motor, Three-phase Motor -Manufacturer: ZSE MEZ, Electric Motor Type 3APJC80-2 -Power: 0.55 kW -Speed: 2890 rpm -Shaft: Ø 19 x 40 mm -Voltage: 220 V Blsdjgicaaopfx Am Iog -Mounting: B3 -Protection Class: IP 44 -Dimensions: 310/165/H195 mm -Weight: 12 kg

Kondisi: bekas, Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 4AP80-4s -Power: 0.55 kW Bljdpfx Amepu Iuke Isg -Speed: 1380 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Protection class: IP44 -Dimensions: 265/200/H210 mm -Weight: 10.1 kg

Kondisi: baru, Table length 3000 mm Table width 1500 mm Cutting heads: Precitec ProCutter Laser power in watts: 6000 X-axis: 3050 mm Z-axis: 150 mm Y-axis: 1550 mm Total power requirement: 21 kW Dimensions: 9190 x 3710 x 2200 mm Machine weight approx. 11,200 kg Equipment: Bedpfsgvq D Usx Am Iolg - Ytterbium Resonator YLS 4000 compact - Beckhoff controller - Precitec ProCutter automatic cutting head - Automatic lubrication system - CAD/CAM software LANTEK EXPERT CUT - 17" touchscreen, keyboard, operating panel - Scrap conveyor underneath cutting table - Additional loading unit Cutting capacities: - Mild steel 25 mm - Stainless steel 15 mm - Aluminium 12 mm - Brass 8 mm - Copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - Max. axis speed: 100 m/min (simulated) - Axis speed X/Y: 100 m/min (single) - Positioning accuracy: ±0.03 mm/min - Cutting height: 125 - 200 mm Loading table: - Number of tables: 2 (35 sec. for table exchange) - Automatic table exchange - Max. load: 2,500 kg Assist gases: - Mild steel – oxygen (0.5 - 25 bar) - Stainless steel – nitrogen (0.5 - 25 bar) - Aluminium – compressed air or nitrogen (0.5 - 25 bar) Incl.: - Compatible extraction system - Sick light curtain safety system - Basic spare parts package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheet metal - Axes equipped with linear motors/servomotors achieve up to 141 m/min. - Acceleration up to 2G - Fiber laser is green laser technology (saves at least 50% energy costs) - No need for laser gas mix - No need for optical components / therefore very low maintenance - Save up to 50% per part due to more efficient production - Extended capabilities: cutting reflective materials such as aluminium, copper, brass, etc. - Also enables precise cuts and smooth surface quality - Heavy-duty frame construction, equipped with globally recognized durable high-quality components - ERMAK passes on the price advantage to its customers through fast and high-quality production - Creative design, consistent top technology and quality - High reliability - High efficiency - High quality - CE declaration

Kondisi: baru, Table length: 3000 mm Table width: 1500 mm Torch heads: 1 Control: CNC Workpiece weight: 1,500 kg Total power requirement: 21 kW Machine weight approx.: 10.4 t Space requirements approx.: 5.2 x 4.2 x 2.62 m CUTTING CAPACITY: Mild steel: 25 mm Stainless steel: 15 mm Aluminium: 12 mm Brass: 8 mm Copper: 8 mm MACHINE AXES: 4 axes [X, Y, Z, U] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT Bjdpfovuz I Hex Am Ielg * 4 servo motors for all axial movements * CNC control panel, 15.5” touch screen * Integrated IPG laser sources and chillers * Precitec ProCutter cutting head system * Air filtration (compressed air filter) * Enclosed housing with specially coated protective windows * Loading / unloading system * Proportional gas and piping system

Kondisi: baru, Table length 3000 mm Table width 1500 mm Torch heads Precitec ProCutter Laser power in watts 4000 X-axis 3050 mm Z-axis 150 mm Y-axis 1550 mm Total power requirement 22 kW Dimensions 9190 x 3710 x 2200 mm Machine weight approx. 11,200 kg Equipment: - MOMENTUM GEN-2 Fiber Laser Cutting System 3,000 x 1,500 mm - Resonator Ytterbium YLS 4000 Compact (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD/CAM Software BECKHOFF - Controller CP 6242 - 17" touchscreen, keyboard, control panel, alphanumeric keypad - Scrap conveyor underneath the cutting table - Additional loading unit Cutting Capacities: - Mild steel ... 20 mm - Stainless steel ... 12 mm - Aluminum ... 10 mm - Brass ... 6.0 mm - Copper ... 5.0 mm Working Area: - max.: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - Max. axis speed: 100 m/min (simulated) - Axis speed X/Y: 100 m/min (single) - Positioning accuracy: ±0.03 mm/min - Cutting height: 125 - 200 mm Loading Table: - Quantity 2 (35 sec. exchange time) - Automatic table changeover Bsdpfegvq A Eex Am Ijlg Assist Gases: - Mild steel - Oxygen (0.5 - 25 bar) - Stainless steel - Nitrogen (0.5 - 25 bar) - Aluminum - Compressed air or nitrogen (0.5 - 25 bar) Included: - Compatible extraction system - Light barrier safety device - Basic spare parts package Why Fibermak / Fiber Laser? - Up to 3 times faster cutting than other laser technologies - Machines for cutting thin sheet metal - Axis speed: up to 141 m/min - Acceleration up to 2G - Fiber laser is green laser technology - At least 50% energy cost savings - No need for laser gas mixture - No need for optical components, resulting in very low maintenance - Save up to 50% per part through more efficient production - Expanded capabilities: cutting reflective materials such as aluminum, copper, brass, etc. - Additionally, precise cuts and smooth surface quality - Heavy-duty frame construction - Equipped with globally recognized, long-lasting, high-quality components - Creative design, consistent, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Kondisi: baru, Table length 4000 mm Table width 2000 mm Burner heads Precitec Procutter X-axis 4050 mm Z-axis 150 mm Y-axis 2050 mm Total power requirement 18.0 kW Machine weight approx. 18,150 kg Space requirement approx. 12430 x 5664 x 2310 mm Equipment: - MOMENTUM GEN - 2 fiber laser cutting system, 4,000 x 2,000 mm - Resonator - Beckhoff controller - Precitec HPSSL Plus automatic cutting head - Automatic lubrication system - CAD/CAM software incl. postprocessor (ALMA) - 15" touchscreen, keyboard, control panel - Collection conveyor under the cutting table - Additional loading unit Cutting capacities: - Mild steel 25 mm - Stainless steel 15 mm - Aluminium 12 mm - Brass 8 mm - Copper 8 mm Working area: - max: 4000 x 2000 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - Max. axis speed: 100 m/min (simulated) - X/Y axis speed: 100 m/min (single) - Positioning accuracy: +- 0.03 mm/min - Cutting height: 125 - 200 mm Loading table: - Quantity: 2 (35 s for table change) - Automatic table changing - Max. loading capacity: 2,500 kg Assistive gases: - Mild steel: Oxygen (0.5 - 25 bar) - Stainless steel: Nitrogen (0.5 - 25 bar) Bodexabn Hopfx Am Ielg - Aluminium: Compressed air or nitrogen (0.5 - 25 bar) Includes: - Compatible extraction system - Sick light barrier safety device - Spare parts starter kit Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines designed for cutting thin sheet metal - Axes equipped with linear motors/servo motors achieve up to 141 m/min - Accelerations up to 2G - Fiber laser is green laser technology (saving at least 50% in energy costs) - No need for laser gas mixtures - No need for optical components / therefore very low maintenance - Save up to 50% per part due to more efficient production - Advanced capabilities: cutting reflective materials such as aluminium, copper, brass, etc. - Also precise cuts and smooth surface quality - Heavy-duty frame, equipped with globally renowned, durable, high-quality components - ERMAK passes on the price advantage to its customers through rapid and high-quality production - Creative design, constant top technology and quality are the most important principles - High reliability - High efficiency - High quality - CE declaration ----- * Machine video available on request *

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Pressure: 60.0 t Bending length: 1270 mm Frame width: 1000 mm Throat depth: 410 mm Ram speed: 160 mm/sec Working speed: 10.0 mm/sec Return speed: 165 mm/sec Stroke: 275 mm Installation height: 530 mm Table height: 900 mm Table width: 90.0 mm Back gauge (adjustable): max. 800 mm Oil capacity: 150 l Operating voltage: 400 V Motor power: 7.5 kW Weight: 4320 kg Dimensions (LxWxH): 2250 x 1960 x 2750 mm Demonstration / demo machine (!!) From our showroom (like NEW) With very few operating hours The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine available in a range of bending lengths from 1,270 mm up to 6,000 mm. It offers a wide selection of pressing forces from 40–400 tons to meet your specific needs. This CNC-controlled press brake can also be extended as a tandem machine, providing you with significant flexibility in terms of bending length. It features numerous functions to ensure simple and safe operation. The robust machine design, in combination with precise CNC control, ensures long-lasting, reliable performance. In addition, the machine offers a variety of upgrade and configuration options to tailor it to your requirements. The DELEM DA CNC graphical control system allows convenient operation via touchscreen and comes with a comprehensive safety package. The machine is operated easily via an LCD touchscreen mounted on the left swivel arm. Bending processes are initiated by actuating a foot switch. In addition to this safety feature, the operator is protected by a safety laser in the working area and a rear light curtain. The CNC control of the press brake automatically calculates press force, bending tolerance, crowning setting, coining force, and tool safety zones. ----- POWER BEND PRO CNC Press Brake Special Equipment: * "ERGO" version – operator knee clearance Bjdpfxjxabt Aj Am Ielg * Flexible articulated arm mount for the control unit * Increased installation height * Extended cylinder stroke * Increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" color TFT high-resolution display * Bending sequence calculation * Product programming and true-to-size representation * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back gauge * Back gauge with R-axis, on ball screw spindles * Travel ranges: X = 800 mm // R = 250 mm * Travel speed X axis: 230 mm/s * With 2 manually adjustable stop fingers - ROLLERI gooseneck upper tool "PS 135.85-R08", system "A" * Including quick-change clamping * Including crowning device in tool holder - ROLLERI segmented universal die block "M 460 R" * Including 1 die shoe "C 1050-R" - Rear safety device: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electric components - FIESSLER AKAS laser safety device...

Kondisi: baru, translation-001 Blsdpsxaalwefx Am Isg

Kondisi: baru, Sheet width 3100 mm Sheet thickness 10.0 mm Sheet thickness for stainless steel 6.0 mm Hold-down clamps 14 units Strokes per minute 13 spm Oil capacity 260 liters Cutting angle 2.0° Throat depth 350 mm Motor power 22.0 kW Bledsxabdbopfx Am Ieg Backgauge – adjustable 1,000 mm Weight 10,575 kg Dimensions (LxWxH) 4.05 x 2.5 x 2.17 m The manufacturer ERMAK offers you with the hydraulic swing beam shear the HGD series, a robust and durable machine for efficient sheet metal processing. This compact all-round machine enables you to increase your productivity. The hydraulic swing beam shear model HGD assists you with precise, fast, and cost-effective cutting operations in your daily workflow. The use of hydraulic hold-downs for sheet fixation and the support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control enables the use of various sheet metal types already stored in the material library. After selecting the maximum thickness, the optimum cutting gap is automatically set via the CNC control system electro-hydraulically, but can also be adjusted manually. The position and automatic retract function of the motorized backgauge can be easily set via touch screen. Furthermore, the control offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC touch screen control * Including CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected functions of the CNC control: * Backgauge pre-selection - X axis * Cutting gap adjustment * Piece count * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (cutting along scribed lines) and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * On precision ball screws * Automatically swing-up at maximum travel for longer cuts * Including selectable retract function ("swing-away function") * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front supporting arms, with T-slot and mm scale - Ball rollers in the front support table - Foldable finger guard with safety switch * Finger guard with viewing windows for cutting along scribed lines - Cutting line illumination with shadow outline - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at rear of machine (safety device) - Free-moving foot pedal - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram

Kondisi: baru, en Bljdexabfxjpfx Am Isg

Kondisi: baru, Sheet width: 4100 mm Sheet thickness: 10.0 mm Sheet thickness (stainless steel): 6.0 mm Hold-downs: 28 units Strokes per minute: 18 Oil capacity: 260 liters Cutting angle: 0.5 - 2° Control system: CYBELEC Cybtouch Motor power: 22.0 kW Backgauge (adjustable): 1000 mm Dimensions (LxWxH): 6100 x 2580 x 2460 mm Weight: 15,100 kg The manufacturer ERMAK presents the HVR series hydraulic swing beam guillotine shear—a robust and durable solution for the efficient processing of sheet metals. This compact, all-round machine will help increase your productivity. The HVR hydraulic guillotine shear supports you in achieving precise, rapid, and cost-effective cuts as part of your daily workflow. Hydraulic hold-downs ensure secure sheet fixation, while the support table with integrated ball transfers guarantees ergonomic and efficient operation for the operator. The CNC control system provides access to a range of pre-configured sheet types in its material library. Upon selecting the maximum thickness and material type, the optimal blade gap and cutting angle are automatically set electro-hydraulically by the CNC system, but can also be adjusted manually. The position and retract function of the powered backgauge can be easily set via touchscreen. Additionally, the controller offers a storage for cutting programs including cutting sequences. ----- Robust electro-hydraulic CNC swing beam guillotine shear * includes CYBELEC CNC touchscreen control * includes CNC electro-hydraulic blade gap adjustment * includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic swing beam guillotine shear - Includes CYBELEC CNC touchscreen controller, model "CybTouch 8" - Key CNC functions: * Backgauge preselection – X axis * Blade gap adjustment * Piece counter Bsdpjxabwusfx Am Ielg * Cutting length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribe line), and much more - Motorized backgauge, travel range: 5.0 – 1000 mm (X axis) * Ball screw drives * Automatically flips up at maximum position for longer cuts * Retract function selectable (“Swing-Away function”) * Positioning accuracy: 0.1 mm * Approximate travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfers on the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cutting line illumination with shadow-line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety feature) - Foot pedal, movable - CE mark / Declaration of conformity - Operating manual + wiring diagram + hydraulic schematic Including special equipment: - Pneumatic sheet support device for thin sheet cutting * Monobloc design

Kondisi: baru, Pressing force 220 t Bending length 4100 mm Frame width 3600 mm Throat depth 410 mm Ram speed 180 mm/sec Working speed 10.0 mm/sec Return speed 160 mm/sec Stroke 275 mm Installation height 550 mm Table height 900 mm Table width 160 mm Oil capacity 300 l Operating voltage 400 Volt Total power requirement 18.5 kW Weight 13,800 kg Dimensions (LxWxH) 5150 x 2250 x 3000 mm The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide range of pressing forces from 40 to 400 tons to meet your specific requirements. This CNC-controlled press brake can also be extended as a tandem machine, giving you great flexibility in bending lengths. It features numerous options that ensure simple and safe operation. The robust machine design, combined with precise CNC control, guarantees long-lasting and reliable performance. In addition, the machine offers a wide range of options and equipment possibilities to adapt it to your individual needs. The DELEM DA CNC graphical controller allows for convenient operation using touchscreens and offers a comprehensive safety package. The machine is easily operated via an LCD touch screen mounted on the left swing arm. Bending operations are initiated by actuating a foot pedal. In addition to this safety measure, the operator is protected by a safety laser in the working area and a rear light barrier. The CNC control of the press brake automatically calculates pressing force, bending tolerance, crowning settings, embossing force, and tool safety zones. ----- POWER BEND PRO electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC controller, model "DA-58T" graphics/touchscreen * 2D graphic programming * 15" color TFT display with high resolution * Bend sequence computation * Product programming and true-to-size display * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - CNC electro-mechanical back gauge * Back gauge with R-axis, equipped with ball-screw drives Bjdpfxexaatho Am Islg * Travel: X = 800 mm // R = 250 mm * X-axis rapid traverse speed: 230 mm/s * 2x manually adjustable gauge fingers - ROLLERI gooseneck punch "PS 135.85-R08", System "A" * Including quick-change clamping system * Including crowning device in the tool holder - 1x universal reversible multi-vee die block - Rear safety device: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN linear bearings) - 1x free-standing dual foot switch - CE mark / Declaration of Conformity - Operating instructions including wiring & hydraulic diagrams

Kondisi: baru, Sheet width: 3,100 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Frame width: 3,100 mm Hold-downs: 14 units Oil capacity: 150 l Stroke rate: 18 strokes/min Cutting angle: 1.2° Control: CYBELEC CybTouch Total power requirement: 11.0 kW Weight: 6,300 kg Dimensions (L x W x H): 4,000 x 2,100 x 1,640 mm The manufacturer ERMAK offers you a robust and durable machine for cost-effective sheet metal processing with its HGS hydraulic swing beam shear series. This compact all-rounder helps you increase your productivity. The HGS hydraulic swing beam shear supports you in precise, fast, and cost-efficient cutting operations in your daily workflow. Hydraulic hold-downs for securing the sheet and the support table with integrated ball transfers ensure ergonomic and efficient cutting for your operator. The CNC control enables the use of various sheet types saved in the material library. After selecting the maximum thickness, the optimal blade gap is automatically set by the CNC control via electro-hydraulic adjustment, but can also be set manually. The position and retraction function of the motorized back gauge can be easily set via the touchscreen. The control system also offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC Touch Screen control * Including CNC electro-hydraulic blade gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected CNC control functions: * Back gauge preselection – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribe line) and many more - Motorized back gauge, travel range = 5.0 – 1,000 mm (X axis) * On ball screw spindles * Automatically swing-up at maximum travel range for longer cuts * Including selectable retraction function ("swing-away function") * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfers on the front support table - Flip-up finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cutting line lighting with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Mobile foot switch Bodpfsxaa D Hjx Am Ijlg - CE marking/Declaration of Conformity - Operation manual + wiring diagram + hydraulic circuit diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Kondisi: baru, Pressing force: 320 t Bending length: 4100 mm Frame width: 3600 mm Throat depth: 410 mm Ram speed: 140 mm/sec Working speed: 10.5 mm/sec Return speed: 150 mm/sec Stroke: 375 mm Installation height: 650 mm Table height: 900 mm Table width: 220 mm Oil capacity: 400 l Operating voltage: 400 Volt Total power requirement: 30.0 kW Weight: 22,064 kg Dimensions (HxWxD): 5350 x 2450 x 3150 mm The SPEED BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths ranging from 1,270 mm up to 6,000 mm. It offers a wide selection of press forces from 40-1,500 tons to meet your individual requirements. This CNC-controlled press brake can also be configured as a tandem machine, providing you with maximum flexibility in bending lengths. It is equipped with numerous features to ensure simple and safe operation. The robust machine design, combined with precise CNC control, guarantees long-lasting and reliable performance. In addition, the machine offers a wide range of expansion and equipment options to tailor it to your specific needs. The DELEM DA graphical CNC control enables convenient operation via touchscreens and comes with a comprehensive safety package. The machine can be easily operated via an LCD touchscreen mounted on the left swing arm. Bending operations are initiated by a foot switch. As an additional safety measure, the operator is protected by a safety laser in the working area and a rear safety light barrier. The CNC control automatically calculates press force, bending tolerance, crowning settings, embossing force, and tool safety zones. Bsdpjxaba Nsfx Am Iolg ----- SPEED BEND PRO electro-hydraulic press brake with: * Increased installation height * Extended cylinder stroke * Increased throat depth ----- Equipment: - DELEM CNC control model "DA-66T" graphic/touchscreen * 2D graphic touchscreen programming mode * 3D visualization in simulation and production * 17" high-resolution TFT color display * Bending sequence calculation * Product programming and display in actual size * USB interface - Swiveling touchscreen control unit, front left - CNC-controlled axes: Y1 – Y2 – X – R – Z1 and Z2, as well as CNC-controlled crowning - CNC electro-motively driven back gauge * Travel range: X axis .. 800 mm // R axis .. 250 mm * Travel speed: X axis .. 500 mm/s // R axis .. 350 mm/s * Ball screw driven * CNC-controlled electro-motive back gauge fingers Z1 + Z2 - Segmental gooseneck upper tool: ROLLERI 135.85.R08, "System A" * Including quick-change clamping * Including crowning device in tool holder - 1x universal reversible die block - Rear safety device: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection system in front of machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN linear guides) - 1x mobile double foot switch - CE marking / Declaration of Conformity ...

Kondisi: baru, Press force 220 t Bending length 3760 mm Distance between uprights 3250 mm Throat depth 410 mm Ram speed 180 mm/sec Working speed 10.0 mm/sec Return speed 160 mm/sec Stroke 275 mm Installation height 550 mm Table height 900 mm Table width 160 mm Oil capacity 300 ltr. Operating voltage 400 Volt Total power requirement 18.5 kW Weight 12906 kg Dimensions L-W-H 5100 x 2250 x 2900 mm The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm to 6,000 mm. It offers a wide range of press forces from 40 to 400 tons to meet your individual requirements. This CNC-controlled press brake can also be expanded as a tandem machine, providing great flexibility in bending lengths. It features numerous functions that ensure simple and safe operation. The robust machine design, combined with precise CNC control, guarantees long-lasting and reliable performance. In addition, the machine offers a variety of expansion and equipment options, allowing you to customize it to your needs. The DELEM DA CNC graphical control enables convenient operation via touchscreens and offers a comprehensive safety package. The machine can be easily controlled via an LCD touchscreen mounted on the left swing arm. Bending operations are initiated by actuating a foot switch. In addition to this safety feature, the operator is protected by a safety laser in the working area and a rear light barrier. The CNC control of the press brake automatically calculates the press force, bending tolerance, crowning adjustment, embossing force, and tool safety zones. ----- POWER BEND PRO electro-hydraulic press brake with: * Increased installation height * Extended cylinder stroke * Increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" graphic/touchscreen * 2D graphical programming * 15" color TFT display with high resolution * Bending sequence calculation * Product programming and true-to-size display * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - CNC electro-motorized backgauge * Backgauge with R-axis, on ball screws * Traverse paths: X = 800 mm // R = 250 mm * Traverse speed X axis .. 230 mm/s * With 2x manually adjustable backgauge fingers - ROLLERI gooseneck upper tool "PS 135.85-R08", system "A" * Including quick-change clamping * Including crowning device in the tool holder - 1x universal reversible die block - Rear safety device: light barrier Bodpfx Aew U U Rrsm Ijlg - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN linear guides) - 1x movable double foot control - CE mark / declaration of conformity - Operating manual incl. electrical & hydraulic diagram

Kondisi: baru, Pressure: 100 t Bending length: 2,600 mm Distance between uprights: 2,200 mm Gap depth: 410 mm Ram speed: 200 mm/sec Working speed: 9.5 mm/sec Return speed: 155 mm/sec Stroke: 275 mm Installation height: 530 mm Table height: 900 mm Table width: 90.0 mm Oil capacity: 150 l Operating voltage: 400 Volt Total power requirement: 7.5 kW Weight: 6,850 kg Dimensions (LxWxH): 3,750 x 1,950 x 2,800 mm The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide range of press forces from 40 to 400 tons to meet your individual requirements. This CNC-controlled press brake can also be configured as a tandem machine, providing extensive flexibility for bending lengths. It is equipped with numerous features ensuring simple and safe operation. The robust machine concept combined with precise CNC control ensures durable and reliable performance. Furthermore, the machine offers a wide variety of extension and equipment options for customization to your specific needs. The DELEM DA graphic CNC control allows convenient operation via touchscreen and offers a comprehensive safety package. The machine is easily operated from an LCD touchscreen attached to the left swivel arm. Bending operations are initiated by a foot switch. In addition to this safety feature, a safety laser in the working area and a rear light curtain protect the operator. Press force, bending tolerance, crowning adjustment, embossing force, and tool safety zones are automatically calculated via the CNC control of the press brake. ----- POWER BEND PRO electro-hydraulic press brake with: * increased daylight opening * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC controller model "DA-58T" graphic/touchscreen * 2D graphical programming Bodpjxaaqysfx Am Iolg * 15" high-resolution color TFT display * Bending sequence calculation * Product programming and actual size display * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - CNC electrically-driven backgauge * Backgauge with R-axis, on recirculating ball screws * Travel: X = 800 mm // R = 250 mm * Travel speed X axis: 230 mm/s * With 2x manually adjustable gauge fingers - ROLLERI gooseneck top tool "PS 135.85-R08", system "A" * Including quick-release clamping system * Including crowning device in the tool holder - ROLLERI segmented universal die block "M 460 R" * Including 1x die shoe "C 1050-R" - Safety device at the rear: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN linear guides) - 1x movable dual foot switch - CE mark / Declaration of Conformity - Operating manual incl. electrical & hydraulic schematics

Kondisi: baru, en Bledpfxoxabdze Am Ijg

Kondisi: baru, en-ERMAK_HGS_hydraulic_swing_beam_shear_listing Blsdpsxabzgjfx Am Iog

Kondisi: bekas, Tahun pembuatan: 2022, Sheet width: 3,100 mm Sheet thickness: 10.0 mm Sheet thickness (stainless steel): 6.0 mm Hold-downs: 14 pcs Strokes per minute: 13 Cutting angle: 2.0° Throat depth: 350 mm Backgauge (adjustable): 1,000 (+) mm Oil capacity: 260 l Motor power: 22.0 kW Weight: 10,575 kg Dimensions (L x W x H): 4,100 x 2,400 x 2,170 mm Demo machine (!!) From our showroom (like new) With very few operating hours The manufacturer ERMAK offers with the HGD series hydraulic swing beam shear a robust and durable machine for efficient sheet metal processing. This compact all-round machine allows you to increase your productivity. The HGD model hydraulic swing beam shear supports you with precise, fast, and cost-effective cutting in your daily workflow. Hydraulic hold-downs for securing the sheet and a support table with integrated ball rollers ensure ergonomic and efficient operation for your operator. The CNC control allows for the use of various sheet types, which are already stored in the material library. After selecting the maximum thickness, the optimal blade gap is set automatically via the CNC electro-hydraulic control, but it can also be adjusted manually. The position and retract function of the motorized backgauge can be conveniently set via touchscreen. Furthermore, the controller offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Incl. CYBELEC CNC touch screen control * Incl. CNC electro-hydraulic blade gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - incl. CYBELEC CNC touch screen controller, model "CybTouch 8" - Some CNC controller functions: * Backgauge preselection - X axis * Blade gap adjustment * Piece counter * Cut length limitation * Material selection, including sheet thickness * Cutting line illumination (for marking cuts) ... and many more - Motorized backgauge, travel range: 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically swings up at maximum travel for longer cuts * Selectable retract function (“Swing-Away function”) * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in front support table - Hinged finger guard with safety switch Blodpfx Amoxab I Ho Ijg * Finger guard with viewing windows for scribed cutting - Cutting line illumination with shadow outline - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Free-standing foot pedal - CE marking/declaration of conformity - Operating manual + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting