Beli Optibelt Katrol Sabuk Bergigi bekas (5.288)

Kondisi: bekas, Tahun pembuatan: 2001, Mesin bekas Tahun pembuatan: 2001 Perlengkapan dan data teknis: Lebar pengamplasan: 1100 mm Panjang sabuk amplas: 1900 mm Tebal benda kerja: 3-150 mm Kecepatan maju: variabel 2,5 - 13 m/menit 1 rol kontak baja 1 rol kontak berlapis karet 1 unit sepatu pengamplasan: dengan sepatu pengamplasan bantalan udara Penggerak: Agregat pengamplasan 1: 15 kW Agregat pengamplasan 2: 15 kW Agregat pengamplasan 3: 11 kW Dengan perpanjangan meja di sisi masuk Dengan perpanjangan meja di sisi keluar Daya total terpasang: 43 kW Kapasitas hisap: sekitar 6750 m³/h Kecepatan udara: 20 m/s Koneksi udara tekan: 6-8 bar Kebutuhan udara: sekitar 30 l/menit Dimensi: 1750 x 2740 x 1890 mm Berat: 3100 kg Ketersediaan: segera Lodpfx Alezk Nm Se Nsrp Lokasi: 65439 Flörsheim

Kondisi: bekas, Tahun pembuatan: 2001, Mesin Bekas Tahun Pembuatan: 2001 Peralatan dan Data Teknis: * Ketinggian kerja konstan * Dilengkapi dengan unit gabungan dengan rol kontak baja dan elemen CPS elektronik dengan jarak 25 mm * Lebar pengamplasan 1100 mm * Panjang sabuk pengamplasan 1900 mm * Ketebalan benda kerja min./maks. 3 - 150 mm * Kecepatan pengumpanan: dapat disesuaikan secara variabel 2,5 - 13 m/menit Lrjdpozk Nlbofx Al Nsp * Unit pengamplasan 11 kW Paket Cat: * Kecepatan penggerak sabuk dapat disesuaikan secara variabel melalui konverter frekuensi * Perangkat pembersih sabuk * Karpet vakum dengan blower Pengaturan: * Terminal dengan 50 slot memori program * Pengaturan menu sederhana melalui tampilan teks yang jelas * Tampilan visual elemen aktif selama proses * Urutan mulai yang sepenuhnya otomatis yang dikendalikan oleh PLC untuk semua penggerak * Pencatatan waktu kerja digital Dilengkapi dengan sikat pembersih Meja rol di bagian masuk Meja rol di bagian keluar Kapasitas penyedotan 1850 m³/jam Nosel penyedotan 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Sambungan udara bertekanan 6-8 bar Kebutuhan udara 10 l/menit Berat 2200 kg Ketersediaan: dalam waktu dekat Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 2006, tr-001 Lsdpfjzkvvyex Al Njrp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jam operasional: 2.608 h, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.350 mm, Karena adanya pembelian mesin baru: Mesin pengamplasan pita bekas: Lebar pengamplasan: 1350 mm Tinggi kerja: 900 mm (konstan) Ketebalan benda kerja: 4-150 mm Panjang pita pengamplasan: 1900 mm Lebar pita pengamplasan: 1370 mm Termasuk pita pengamplasan (baru): 3 buah K80 8 buah K100 8 buah K150 Termasuk distributor penyedot debu 5 cabang, 300 mm (tanpa katup) 1. Unit, Tipe C: Unit gabungan dengan batang penekan segmen yang dikendalikan secara elektronik (50 mm) Rol kontak, diameter 140 mm Kecepatan pita pengamplasan: 18 m/s (15 kW) 2. Unit, Tipe E: Unit sepatu pengamplasan dengan batang penekan segmen yang dikendalikan secara elektronik (25 mm) Kecepatan pita pengamplasan: 4,5/9/18 m/s (3,7/7,5/15 kW) Perangkat penghembus pita Karpet pengangkut dengan umpan variabel tanpa langkah 2,5-13 m/menit Sikat pembersih: diameter 100 mm Berat total: sekitar 3300 kg Mesin tersedia mulai sekitar akhir Juli. Saat ini, mesin masih digunakan dan berfungsi penuh. Lrjdpfx Alozm Ed So Nsp

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5002150, daya: 0,37 kW (0,50 hp), kecepatan rotasi (min.): 1.380 rpm, kecepatan rotasi (maks.): 275 rpm, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: udara, jenis perlindungan (kode IP): IP54, This geared motor is a high-performance frequency inverter engineered for precise control of electric motors. With its compact design and high efficiency, this model is ideally suited for applications in automation technology. Outstanding features include an integrated safety function that enables reliable monitoring and control, as well as a user-friendly interface for easy programming and customization. The frequency inverter supports various communication protocols, ensuring seamless integration into existing systems. Additionally, it offers high flexibility in application, making it suitable for both simple and complex drive solutions. Lrsdpsuu Rzxofx Al Nsp

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 01.7246421503.0001.15, daya: 0,18 kW (0,24 hp), kecepatan rotasi (maks.): 900 rpm, tegangan masuk: 220 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, berat keseluruhan: 7 kg, torsi: 335 Nm, jenis pendinginan: udara, jenis perlindungan (kode IP): IP54, This SEW gear motor is a high-performance frequency inverter that combines a compact design with exceptional power and efficiency. It has been developed for precise control of electric motors. This motor is ideal for applications requiring a reliable drive solution. With its robust construction and high-quality materials, it ensures a long service life and low maintenance costs. The integrated gearbox unit guarantees optimal torque transmission and enables precise control of the drive speed. Thanks to its flexible mounting options and high adaptability, the SEW gear motor is the perfect choice for industrial applications in various sectors, ranging from conveyor technology to mechanical engineering. Lrodpfx Aeuu Rx Del Njp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.962 mm, tinggi total: 1.992 mm, panjang total: 1.450 mm, lebar kerja: 1.100 mm, lebar penggilingan: 1.100 mm, berat keseluruhan: 1.150 kg, tinggi penggerindaan: 170 mm, daya: 15 kW (20,39 hp), jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 1.900 mm, lebar sabuk penghalus: 1.120 mm, panjang meja: 1.962 mm, lebar meja: 1.100 mm, daya motor pengumpan: 750 W, kebutuhan udara: 3.620 m³/jam, tegangan masuk: 400 V, tekanan kerja: 8 batang, > Pengaturan keseimbangan butiran digital & kontrol bantalan pengamplasan langsung pada panel kontrol Lrodpfx Alezm Nifo Njp > Lebar pengamplasan 1100 mm > Unit rol kontak dan bantalan pengamplasan > Sikat Scotch Brite di bagian ujung mesin > Perpanjangan meja rol dua sisi 200 mm > Tinggi celah dapat diatur secara tepat hingga 0,1 mm pada panel kontrol > Kecepatan umpan variabel 0,1-10 m/menit

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Ferwood Code: RS0003213 - Manufacturer Code: 2703A0047 - Condition: As new (showroom item) - Functionality: Fully operational - If interested, we offer refurbishment service; please contact us. Lsdpfx Alsv Azfnj Nsrp

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang ulir: 350 mm, diameter benda kerja (maks.): 30 mm, Mesin pembentuk ulir FETTE, Tipe: R30, tanpa kepala. Ledpfszmpbuex Al Nerp Kepala pembentuk ulir dari M6 hingga M30 – M42* dapat digunakan. Rentang pembentukan ulir bergantung pada kepala yang digunakan. Panjang ulir maksimum: 360 mm 6 kecepatan putaran spindel: 500–4800 RPM Penjepit hidraulik Operasi otomatis dimungkinkan. Berat kira-kira: 850 + 150 kg

Tahun pembuatan: 1991, Kondisi: bekas, Maximum wheel diameter: 400 mm Maximum number of teeth: 150 Ledpfx Aot Hwylsl Nerp Maximum module: 5 Total power requirement: 16 kW Machine weight approx.: 10 t PRÄWEMA CNC Gear Edge Milling Machine with Continuous Hobbing Process for chamfering external and internal gears on sliding sleeves, synchronizer rings, coupling bodies, starter gears, spur gears, etc. Model: SynchroForm W 2 - 1 Year: 1991 Machine No.: 05610 Workpiece diameter min./max.: 30 - 400 mm Number of teeth: 6 - 150 Maximum module: 5 Tool holder/shank diameter: SK 30 / 20 mm Maximum tool speed/spindle power (constant): 4,000 rpm / 1.8 kW Cross and longitudinal feed rates: 0.001 - 12 m/min Maximum workpiece speed (1.5 kW, C-axis): 2,000 rpm Total drive: approx. 16 kW, 380 V, 50 Hz Weight: approx. 10,000 kg Accessories / Special Features - BWO (Heckler & Koch) CNC control type 785 H for 7 axes in total, with screen input and all necessary monitoring and fault diagnostic systems for fully automatic operations. - 2 milling spindle units (left/right) that can be CNC-adjusted to all necessary angles: Z and W axes = tool cross-slide / X and U axes = tool longitudinal slide, L and O axes = milling spindle, C axis = workpiece spindle rotation. Manual adjustment: tool slide rotary plate (B and E axes), tool slide vertical adjustment (V and Y axes), tool head tilting (A and D axes), each with ROD for digital read-out in the control unit. - Hydraulic workpiece clamping device integrated with automatic loading system via workpiece feeder/conveyor and swing loader, as well as air system monitoring for the workpiece. - Coolant system with chip conveyor, soundproof enclosure, central lubrication system, integrated hydraulic system, pneumatically operated safety doors, deburring device, etc. Working principle: Gear hobbing with electronically synchronized tool and workpiece axes, enabling machining of both symmetrical and asymmetrical straight chamfer forms. Characterized by high productivity and precision. Condition: Good to very good – will be available for demonstration under power soon Delivery: Ex stock – as inspected Payment: Strictly net – upon receipt of invoice We always have further machines for the machining of transmission components in stock. Please contact us with your requirements at any time.

Kondisi: bekas, Tahun pembuatan: 1980, Rad diameter – max. 2500 mm Rad width 0 mm Module – max. 34 Module – min. 1 Total power requirement approx. 15 kW Machine weight approx. 15 t Required floor space approx. 4.20 x 2.00 x 2.90 m K L I N G E L N B E R G (Germany) Universal Involute and Helix Testing Machine Model PFSU 2500 Year approx. 1980 Serial No. B 2918 _____ Min/max. gear diameter: 250 - 2,500 mm Module range: 1 - 34 Maximum base circle diameter: 2,400 mm Measurable gear tooth length: 500 mm Stroke of measuring slide, approx.: 600 mm Helix angle: 0 - 45° Workpiece length between centers min./max.: 430 - 2,500 mm Workpiece diameter in counter bracket: 1,340 mm Workpiece table diameter: 690 mm Diagram magnification: 50/100/200/500/1000/2000 : 1 Max. permissible test weight of gear, approx.: 10,000 kg Total electrical load, approx.: 15 kW - 380 V - 50 Hz Weight of machine, approx.: 15,000 kg The machine is suitable for measuring the tooth profile and tooth flank traces on heavy-duty straight and helical spur gears. Accessories / Special Features: Ljdpfx Aot Hw Aael Nsrp * Digital setting of base circle and digital angle settings, without use of base circle templates. * Length-adjustable support for dividing tester (test unit not included). * Capable of testing heavy workpieces. Motor-driven set-up, alignment, and testing process via push button. * Counter bracket can be swiveled back for loading heavy-duty gears and sprockets; other accessories included. Condition: This measuring machine must be reconditioned and retrofitted with a new CNC control system. However, the basic mechanics of the machine are sound, making it worthwhile for refurbishment. The machine cannot be demonstrated under power. Parts of the control panel are missing.

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table Lrodpfxet Hww Do Al Njp for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1980, Maximum wheel diameter: 2,500 mm Wheel width: 1,200 mm Module - max.: 32 Module - min.: 3 Total power requirement: 25 kW Lredpfxjt Hwqqo Al Nep Machine weight approx.: 60 t Space requirement approx.: m Year of manufacture: 1980 Overhauled: 1990 Wheel Ø min./max.: 180 - 2,500 mm Module: 3 - 32 Maximum helix angle: 10 - 35° Wheel width for spur gearing: 1,200 mm Stroke length approx.: 100 - 1,200 mm Stroke rate: 80 - 350 strokes/min. Adjustable stroke position: 300 mm Stroke speed: 4-40 m/min. Maximum workpiece weight approx.: 18,000 kg Max. number of teeth: 16 - 576 Table size Ø x bore: 1,400 x 500 mm Grinding wheel Ø approx.: 500 mm Grinding wheel peripheral speed: 34 m/s Total drive approx.: 25 kW - 380 V - 50 Hz Weight approx.: 15 tons Accessories / Special equipment: - Hydrostatic slideways on the grinding carriage, table, and all other guideways - Complete grinding area enclosure with sliding doors - Automatic grinding cycle with multiple passes and settings for roughing, semifinishing, fine finishing as well as automatic dressing cycle based on preset number of teeth - Profile correction possible via suitable dressing and additional movement of the grinding carriage (height and flank crowning) - Approx. 50 change gears, incl. inclination indicator - Large coolant system with belt filter and oil mist extraction - Separate control cabinet, separate hydraulic unit, separate oil cooling unit

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter - max. 265 mm Wheel width 45 mm Module - max. 4 Module - min. 0.3 Workpiece diameter - max. 300 mm Stroke length max. 0-50 mm Stroke position adjustment 25 mm Distance spindle/clamping surface max. 170/245 mm Spindle taper internal MK 4 Table size 180 mm Table bore 95/75 mm Strokes per minute 450 - 840 Total power requirement 10 kW Machine weight approx. 5200 kg Space requirement approx. m max. gear Ø (outer) approx. 265 mm max. workpiece Ø for internal gearing 300 mm max. gear width 45 mm Lrsdpfjt Hwrusx Al Njp Module range 0.3 - 4 Stroke length 0 - 50 mm Stroke position adjustment 25 mm Distance table to spindle min./max. 170/245 mm Spindle internal taper (outer 90/50 inner) MK 4 Table size 180 mm Table bore 95 / 75 mm Table traverse (cross) approx. 175 mm Stroke rate steplessly adjustable 450 - 840 strokes/min Feed range 0.09 - 0.6 mm/stroke Rotary feed 2722 - 681 strokes/cutter revolution Main drive 10 kW- 380 V -50 Hz Weight 5,200 kg Accessories / Special equipment * Selector switch for various operating programs and manual control * Multi-cut device for roughing/finishing/scoring * Hydraulic external clamping device mounted on table (for internal gearing - a type of collet chuck) * Separate control cabinet and separate hydraulics * Hydrostatic linear guide with oil recooler, external * Lateral table shifting for optimal ram retraction * Stepless stroke speed adjustment via GS motor * Built-in coolant system * Pre-settable pulse counter for precise table stop after each cut, with digital display * Various change gears

Kondisi: bekas, Tahun pembuatan: 1996, Workpiece diameter: 240 mm Center distance: 0 mm Max. honing length: 500 mm Max. module: 5 Total power requirement: 12 kW Machine weight approx.: 5,000 kg Space requirement approx.: [missing dimension] REISHAUER (Switzerland) CNC-controlled Gear Honing Machine Model: RZR, Year of manufacture: 1996 # 74 105 Wheel diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30 ° Workpiece slide travel (Z-axis): 275 mm Honing tool traverse (X-axis): 128 mm X-axis infeed per stroke: 0.001 mm/stroke Crowning approx.: 0.5 ° Workpiece clamping length approx.: 500 mm Lrjdpfx Alst Hwvme Nsp Max. workpiece oscillation approx.: 3,000 mm Honing tool diameter outer/inner x width: 325/308 x 45 mm Honing tool speed: 100 - 1,200 rpm Dressing speed of honing tool: 30 - 1,000 rpm Spindle drive: 4 kW Total drive: approx. 12 kW - 400 V - 50 Hz Total weight approx.: 5,000 kg Accessories / Special Equipment SIEMENS CNC path control type 810 G allows input of all relevant gear data and the setup of the workpiece via conversational interface. With DNC interface RS 232 for data import and export. A-axis = swivel angle / Z-axis = table movement / X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment With integrated device for automatic threading of the honing wheel into the gear gap The tool swivel angle (A-axis) is also moved electronically, quickly, and accurately and hydraulically clamped, allowing for faster setup times. Hydraulic workpiece clamping via foot switch between workpiece spindle and tailstock; both units are movable on the workpiece table according to the workpiece. Fully enclosed working area with sliding doors and safety interlock High-end original REISHAUER honing oil filtration system Type RTO 40.10, with centrifuge and cooling unit for consistent honing oil temperature, oil mist filter, etc. Various diamond dressing tools mounted on arbors. Separate ventilated and cooled electrical and control cabinet, separate hydraulic unit.

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Lodpjt Hw D Rjfx Al Nerp Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: bekas, Tahun pembuatan: 1977, Wheel diameter - max. 400 mm Wheel width 280 mm Module - max. 4 Module - min. 1 Total power requirement 15 kW Machine weight approx. 6000 kg Space requirement approx. m L O R E N Z Lodet Hw Hxopfx Al Nsrp Universal Gear Hobbing Machine Model: F 400 Year of manufacture: 1977 Serial No.: 8687 _____ Wheel diameter min./max. 400 mm Module range 1 - 4 Number of teeth approx. 8 – 210 Milling width approx. 280 mm Max. workpiece installation length approx. 450 mm Milling slide swivels up to 60° Cutter size (diameter x length) 160 x 220 mm Cutter shift max. 180 mm Cutter speeds 125-500 rpm Table diameter x bore 375 x 80 mm Feed rates: axial 0.31 - 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Milling spindle drive approx. 8 kW Total drive approx. max. 15 kW - 380 V - 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment • Various milling programs selectable for climb and conventional milling, as well as radial / axial milling processes, possibly for worm milling • Universal milling head with shifting capability • Hydraulic workpiece clamping in the table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Infinitely variable speed adjustment, display for speed and amperage • Change gears, various accessories, coolant system * Very robust design Condition: Good – demonstration available soon Delivery: Ex stock - as inspected Payment: Upon receipt of invoice, strictly net

Kondisi: bekas, Tahun pembuatan: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 #0836 _____ Max. wheel diameter 80 mm Module 1–3 Helix angle +/- 45° Distance table center to tool center 15–160 mm Vertical hob carriage travel 250 mm Shifting distance/tool traverse path 180 mm Min. number of teeth 3! Cutter diameter x length approx. 90 x 200 mm Cutter speeds up to max. 800 rpm Feeds in axial/radial/tangential directions 20/4/5 mm/rev Max. workpiece clamping length 250 mm Lsdpfot Hw R Dox Al Norp Spindle drive approx. 8 kW Total drive approx. 30 kW – 400 V – 50 Hz Total weight approx. 7,500 kg Equipment / Special features • SIEMENS CNC control type 840 C for 6 axes (i.e. hob drive/table drive/swivel angle of hob head/axial feed/radial feed/tangential feed), with gearing-specific operator interface and diagnostic functions for rapid troubleshooting. • With device for automatic threading of the hob into the tooth gap • Automatic shifting of the hob axis • Automatic component loading unit SSL = Rapid Swivel Loader using mechanical indexing gear and cam disk for quick loading times, with triple rotary gripper for loading blanks/processing position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feeding via plate chain conveyor (PKB) for workpiece transport with positive-fit workpiece carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete work area enclosure, intermediate coolant tank with pump Complete enclosure of the workspace with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Condition: satisfactory to good – under power, ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1980, en-01 Ledpfx Ast Hwnijl Nerp

Kondisi: bekas, Tahun pembuatan: 1975, Wheel diameter – max. 160 – 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Machine weight approx. 3 t Space requirement approx. m Lsdpfjt Hwptsx Al Norp K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Lead Inspection Type PFSU 1600 Year of manufacture: 1975, modernized in 1995 #B 2281 Working range: Min./Max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Max. gear width: 250 mm Stroke of measuring slide approx.: 300 mm Max. helix angle: 0 – 90° Max. workpiece length in centers: approx. 1,150 mm Tailstock throat: 450 mm Diagram recording magnification: 50/250/500/1000 x Max. test gear weight: approx. 4,000 kg Weight approx.: 3,000 kg Total drive approx. 1 kW – 380 V – 50 Hz Suitable for inspecting: - Tooth profile (involute) - Tooth lead (helix angle/lead) on internal and external gears, cutting and shaving gears, worms, etc. - Tooth runout, surface roughness - Determining/reconstructing base circle and helix angle, and more Accessories / Special equipment: - Optical base circle setting and optical angle adjustment; no base circle disks required - Designed to accept heavy workpieces; testing cycle can be motorized or manually controlled via handwheels - Rotating auxiliary table, Ø 480 mm, for mounting larger gear bodies, with 2 sets of different-length supports (400 and 470 mm), up to the maximum gear diameter of 1,600 mm - Counter-support AV 17 for maximum workpiece length of 1,150 mm - Separate electrical cabinet for manual movement control - GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally German, program update to latest version V 21.17, ideal for generating modern test reports with graphics, graphic display on monitor, additional subprograms, HP printer, flat screen - Various probe inserts, small parts, adjustable mount for indexing test device (mounted at rear), leveling feet, etc. - Without indexing test device, but mounting provided and installed at rear Condition: very good – demonstration-ready, professionally dismantled and reinstalled.

Kondisi: bekas, Tahun pembuatan: 1997, Maximum wheel diameter: 215 mm Wheel width: 40.65 mm Lodpfxjt Hwxhs Al Nerp Module - max.: — Total power requirement: 20 kW Machine weight approx.: 10 t GLEASON (USA) CNC grinding machine for spiral and hypoid bevel gears Model: PHOENIX HG 200 Year of manufacture: 1997 --- Max. external workpiece diameter: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth range: 5 - 200 Max. gear ratio: 1:10 Grinding wheel diameter: 51–190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speed: 0–30 rpm Workpiece spindle bore (tapered): 3 29/32" Total drive approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special features: • FANUC – 7-axis CNC control type 150 MB with monitor and direct input, automatic calculation of all workpiece and grinding parameters • Large, elaborate coolant system with filtration unit, belt filter, etc. • Driven grinding wheel dresser with CNC dressing control for automatic compensation of form and diameter after each dressing • Gear grinding can be performed either using the single-component method with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional “dressable” aluminum oxide (cost-dependent). Grinding with a conical grinding wheel offers advantages in terms of heat development and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured cost-effectively, at high quality and with consistent accuracy, featuring short setup times. For further details, refer to the brochure copy on our website. Condition: very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Additional gear cutting machines available from stock at all times. (Key dimensions repeated for completeness) X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speed: 0–30 rpm Workpiece spindle bore (tapered): 3 29/32" Total drive approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special features: • FANUC – 7-axis CNC control type 150 MB with monitor and direct input, automatic calculation of all workpiece and grinding parameters • Large, elaborate coolant system with filtration unit, belt filter, etc. • Driven grinding wheel dresser with CNC dressing control for automatic compensation of form and diameter after each dressing • Gear grinding can be performed either using the single-component method with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional “dressable” aluminum oxide (cost-dependent). Grinding with a conical grinding wheel …

Kondisi: bekas, Tahun pembuatan: 1983, Workpiece diameter 250 mm Centre distance 0 mm Maximum honing length: --- mm Maximum module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Model D - 250 Year of manufacture 1983 * Serial No. 31 205.049.22 _____ Gear diameter: 10 - 250 mm Module: 1 - 5 Gear length / Max. table stroke: 500 mm Centre height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swivel range of the honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross slide travel: 270 mm Cross slide rapid traverse: 50 mm Cross slide mechanical infeed: 1 - 8 mm/⌀ Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec Table speed hydraulic: 0 - 6 m/min Total drive: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / Special equipment: - Pre-settable machining parameters via counters and control switches for automatic operation, with workpiece counter - All roughing and finishing infeeds adjustable via decade switches, table reversal times adjustable via potentiometer, rapid infeeds adjustable by time (1s = 0.04mm) - Ampere display, etc. - Capability for crowning and taper honing via templates, also possible off-centre; workpiece must be pre-machined accordingly - Stand-alone honing oil system with magnetic separator and fine filter - Mechanical tailstocks for manual loading, oil mist separator Ljdet Hwzpopfx Al Nsrp - Sliding doors with foot switch, stand-alone hydraulics

Kondisi: bekas, Tahun pembuatan: 1980, Max. wheel diameter - 400 mm Wheel width - n/a mm Module - max. 5 Module - min. Total power requirement - kW Lrodpfxjt Hw Ebo Al Nsp Machine weight approx. t Space requirements approx. m Manual double-flank gear rolling tester

Kondisi: bekas, Tahun pembuatan: 1973, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7000 kg LORENZ High-Performance Gear Shaping Machine Model: LS 400 Year of manufacture: 1973 S/N: 11 884 ----- Max. external gear diameter: 400 mm* (possibly larger) Max. internal gear diameter: approx. 350 mm Max. wheel width: 75 mm Module range: 0.5-6 Stroke length: approx. 82 mm Adjustable stroke position: 0–80 mm Ram overhang (ram spindle/machine body): 250 mm Spindle taper: approx. MK 5 Strokes per minute roughing/finishing: 118–1,000 /min. Table size: 400 mm Table bore: 125 mm Mounting height between table and ram head min./max.: approx. 280/350 mm Fixed ram spindle overhang: 250 mm Table axial travel: approx. 295 mm Number of teeth: approx. 12–150/300 Lsdpfjt Hw Hljx Al Norp Feed range Tooth depth: 0.01–0.063 mm/stroke Rotary feed at tool diameter 125: 0.125–3.150 mm/stroke Spindle/main drive approx. 19 kW / 25 kW – 380 V – 50 Hz Weight: 7,000 kg Accessories / Special Equipment: • Built-in intermediate plate 200 mm for increased ram height, • Hydraulic workpiece clamping system (RINGSPANN make) integrated in the table for flat workpieces • Automatic stroke speed changeover and automatic feed changeover for roughing and finishing operations in up to 4 cuts • Separate control cabinet, separate hydraulic unit • Integrated coolant system with magnetic chip conveyor, two-hand actuation • Approx. 40 change gears, 4 shaper tool holders, 2 pulleys for stroke drive, etc. Condition: Good, under power - ready for demonstration Delivery: ex-stock - as inspected Payment: strictly net, upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1999, Wheel diameter – max. 280 mm Wheel width 330 mm Module – max. 5 Module – min. 1 Control LIEBHERR CNC Total power requirement 28 kW Machine weight approx. 12 t Space requirement approx. m L I E B H E R R CNC-controlled Gear Hobbing and Profile Grinding Machine Type LCS 282 Year of manufacture 1999 # 1099 _____ Max. wheel diameter 280 mm Module 1 - 5 Helix angle +/- 35° Distance table center to tool center 15 – 285 mm Grinding slide vertical stroke 330 mm Shift path/tool travel 200 mm Min. number of teeth 7 Grinding spindle position above table min./max. 70 - 360 mm Workpiece clamping length 420 to max. 620 mm Grinding worm / profile grinding wheel Ø 145 x 210 / 175 mm Grinding worm/profile tool speed 2,500 – 10,000 rpm Max. table speed 750 rpm Spindle drive 28 kW Total drive approx. 50 kW - 400 V – 50 Hz Total weight approx. 12,000 kg Accessories / Special Equipment • LIEBHERR CNC control Type LH 90 GG is an easy-to-program CNC control unit (B+R/IPC 5000) with gearing-specific operator interface and diagnostics functions for fast troubleshooting. (Remote diagnostics also possible) • Equipped with automatic threading device for inserting the grinding wheel into the tooth gap • The machine operates with three grinding methods: a. Generating grinding with CBN grinding worms = fastest processing b. Profile grinding with CBN profile grinding wheels (one or two wheels) = highest precision machining! c. Combination of a and b (most economical solution): pre-grinding with grinding worm / finish grinding with the profile grinding wheel in single part operation • Automatic shifting of the grinding worm or automatic positioning of the profile wheel • Automatic workpiece loading device with a ring loader mounted to the counter column, which automatically loads raw and finished parts. The workpieces are conveyed to the ring loader via a separate FLEX LINK chain conveyor, picked up and also removed. This enables unmanned operation. • Hydraulic workpiece clamping in the table, but without clamping fixtures. Tailstock carriage is present on the counter column, but without tailstock itself. Carriage stroke up to approx. 350 mm • Complete work area enclosure with sliding door and separate CO2 extinguishing system/IR sensor No original coolant system (since there is central supply), and no dresser available Condition : good to very good – demonstration ready under power, compact design! Delivery : ex stock - as inspected Payment : strictly net - after receipt of invoice Lredjt Hwu Ajpfx Al Nop We appreciate your interest – over 200 gear machines in stock at all times.